Elite.Parts

Description

RES 10K OHM 5% 25W TUBULAR WW

Part Number

HL02506Z10K00JJ

Price

Request Quote

Manufacturer

DALE-VISHAY

Lead Time

Request Quote

Category

PRODUCTS - H

Datasheet

9640556_1.pdf

109 KiB

Download

Extracted Text

HL, NHL Vishay Dale Wirewound Resistors Industrial Power, Tubular (HL), Non-Inductive Tubular (NHL) FEATURES • High temperature silicon coating • Complete welded construction • Available in non-inductive styles (model NHL) with Aryton-Perry winding for lowest reactive components • Tight tolerance of 5% for values above 1Ω • Excellent stability in operation STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL POWER RATING RESISTANCE RANGE WEIGHT MODEL MODEL P Ω (Typical) 25°C W ± 5% ± 10% g HL011 HL-11 11 1.0 - 70k 0.10 - 70k 10.50 NHL011 NHL-11 1.0 - 4.7k 1.0 - 4.7k HL012 HL-12 12 1.0 - 58k 0.10 - 58k 6.69 NHL012 NHL-12 1.0 - 3.9k 1.0 - 3.9k HL015 HL-15 15 1.0 - 60k 0.10 - 60k 8.64 NHL015 NHL-15 1.0 - 4.3k 1.0 - 4.3k HL020 HL-20 20 1.0 - 95k 0.10 - 95k 12.57 NHL020 NHL-20 1.0 - 6.8k 1.0 - 6.8k HL025 HL-25 25 1.0 - 115k 0.10 - 115k 20.72 NHL025 NHL-25 1.0 - 8.8k 1.0 - 8.8k HL026 HL-26 26 1.0 - 170k 0.10 - 170k 15.34 NHL026 NHL-26 1.0 - 11.8k 1.0 - 11.8k HL050 HL-50 50 1.0 - 112k 0.10 - 112k 42.08 NHL050 NHL-50 1.0 - 21.5k 1.0 - 21.5k HL051 HL-51 51 1.0 - 124k 0.10 - 124k 51.96 NHL051 NHL-51 1.0 - 22.9k 1.0 - 22.9k HL060 HL-60 60 1.0 - 145k 0.10 - 145k 65.64 NHL060 NHL-60 1.0 - 27.2k 1.0 - 27.2k HL065 HL-65 65 1.0 - 170k 0.10 - 170k 64.82 NHL065 NHL-65 1.0 - 31.4k 1.0 - 31.4k HL080 HL-80 80 1.0 - 190k 0.10 - 190k 121.58 NHL080 NHL-80 1.0 - 38.3k 1.0 - 38.3k HL100 HL-100 100 1.0 - 260k 0.10 - 260k 91.37 NHL100 NHL-100 1.0 - 48.5k 1.0 - 48.5k HL120 HL-120 120 1.0 - 330k 0.10 - 330k 183.82 NHL120 NHL-120 1.0 - 64.1k 1.0 - 64.1k HL130 HL-130 130 1.0 - 380k 0.10 - 380k 192.36 NHL130 NHL-130 1.0 - 70.2k 1.0 - 70.2k HL160 HL-160 160 1.0 - 470k 0.10 - 470k 245.86 NHL160 NHL-160 1.0 - 105k 1.0 - 105k HL175 HL-175 175 1.0 - 500k 0.10 - 500k 250.80 NHL175 NHL-175 1.0 - 112k 1.0 - 112k HL225 HL-225 225 1.0 - 645k 0.10 - 645k 309.97 NHL225 NHL-225 1.0 - 121k 1.0 - 121k GLOBAL PART NUMBER INFORMATION New Global Part Numbering: NHL10006Z10R00JJ (preferred part numbering format) N H L 1 000 6 Z 1 0 R 00 JJ GLOBAL MODEL TERMINAL TERMINAL VALUE TOLERANCE PACKAGING SPECIAL NHL10 DESIGNATION FINISH R = Decimal J = ± 5.0% E* = Lead Free Skin Pack (Dash Number) 06 E* = Lead Free K = Thousand K = ± 10% J = Tin/lead skin pack (J01) (up to 2 digits) Z = Tin/lead 10R00 = 10.0Ω From 1-99 as *Lead Free will not be available until Q1 2005 N = Nickel 1K000 = 1KΩ applicable Historical Part Number example: NHL-100-06Z 10Ω 5% J01 (will continue to be accepted) NHL-100 06Z 10Ω 5% J01 HISTORICAL MODEL TERMINAL / FINISH RESISTANCE VALUE TOLERANCE PACKAGING CODE www.vishay.com For technical questions, contact ww2bresistors@vishay.com Document Number: 30208 64 Revision 10-Sep-04 HL, NHL Wirewound Resistors Industrial Power, Tubular (HL), Non-Inductive Tubular (NHL) Vishay Dale DIMENSIONS A (Includes Coating and Terminal Band) DIMENSIONS in inches [millimeters] GLOBAL MODEL CORE DIMENSIONS TERMINAL DISTANCE TERMINAL MOUNTING A SETBACK BETWEEN DESIGNATION HARDWARE LENGTH I.D. (Max) ± 0.31 TERMINALS OPTIONS ± 0.062 O.D. ± 0.031 STANDARD OPTIONAL [± 0.79] (REF) [± 1.59] [± 0.79] HL011 0.469 1.750 0.375 0.188 0.094 1.187 02 --- 101, 204, 301 NHL011 [11.91] [44.45] [9.53] [4.76] [2.38] HL012 0.406 1.750 0.313 0.188 0.094 1.187 05 14 101, 204, 301 NHL012 [10.32] [44.45] [7.94] [4.76] [2.38] HL015 0.563 1.500 0.438 0.313 0.094 0.937 02 14 101, 203, 301 NHL015 [14.29] [38.10] [11.11] [7.94] [2.38] HL020 0.563 2.000 0.438 0.313 0.094 1.437 02 14 101, 203, 301 NHL020 [14.29] [50.8] [11.11] [7.94] [2.38] HL025 0.688 2.000 0.563 0.313 0.094 1.312 06 15 101, 203, 301 NHL025 [17.46] [50.8] [14.29] [7.94] [2.38] HL026 0.563 3.000 0.438 0.313 0.094 2.437 02 14 101, 203, 301 NHL026 [14.29] [76.2] [11.11] [7.94] [2.38] HL050 0.688 4.000 0.563 0.313 0.094 3.312 06 15 101, 203, 301 NHL050 [17.46] [101.6] [14.29] [7.94] [2.38] HL051 0.906 3.500 0.750 0.500 0.125 2.75 06 15 102, 206, 303 NHL051 [23.02] [88.9] [19.05] [12.70] [3.18] HL060 0.906 4.000 0.750 0.500 0.125 3.250 06 15 102, 206, 303 NHL060 [23.02] [101.6] [19.05] [12.70] [3.18] HL065 0.906 4.500 0.750 0.500 0.125 3.750 06 15 102, 206, 303 NHL065 [23.02] [114.3] [19.05] [12.70] [3.18] HL080 1.313 4.000 1.125 0.750 0.219 2.812 07 15 103, 205, 303 NHL080 [33.34] [101.6] [28.58] [19.05] [5.56] HL100 0.906 6.500 0.750 0.500 0.125 5.750 06 15 102. 206, 303 NHL100 [23.02] [165.1] [19.05] [12.70] [3.18] HL120 1.313 6.000 1.125 0.750 0.219 4.812 07 15 103, 205, 303 NHL120 [33.34] [152.4] [28.58] [19.05] [5.56] HL130 1.313 6.500 1.125 0.750 0.219 5.312 07 15 103, 205, 303 NHL130 [33.34] [165.1] [28.58] [19.05] [5.56] HL160 1.313 8.000 1.125 0.750 0.219 6.812 07 15 103, 205, 303 NHL160 [33.34] [203.2] [28.58] [19.05] [5.56] HL175 1.313 8.500 1.125 0.750 0.219 7.312 07 15 103, 205, 303 NHL175 [33.34] [215.9] [28.58] [19.05] [5.56] HL225 1.313 10.500 1.125 0.750 0.219 9.312 07 15 103, 205, 303 NHL225 [33.34] [266.7] [28.58] [19.05] [5.56] TERMINAL DIMENSIONS TERMINAL TYPE DIMENSION 02 05 06 07 14 15 D A A D 0.188 0.188 0.250 0.375 0.188 0.250 C A C [4.76] [4.76] [6.35] [9.53] [4.76] [6.35] 0.406 0.438 0.563 0.625 0.563 0.594 Style 02 B B [10.32] [11.11] [14.29] [15.88] [14.29] [15.08 thru 07 Styles 14 & 15 B 0.093 0.104 0.166 0.173 0.050 0.065 C [2.36] [2.64] [4.22] [4.39] [1.27] [1.65] TERMINAL FINISH - “E” Finish - 100% Sn coated steel. “Z” 0.020 0.020 0.020 0.020 0.020 0.031 Finish - 60/40 SnPb coated steel. “N” Finish - Nickel coated D [0.51] [0.51] [0.51] [0.51] [0.51] [0.79] steel. Finish for terminal style 14 and 15 limited to nickel plated steel (N). Document Number: 30208 For technical questions, contact ww2bresistors@vishay.com www.vishay.com Revision 10-Sep-04 65 HL, NHL Wirewound Resistors Industrial Power, Tubular (HL), Non-Inductive Tubular (NHL) Vishay Dale MOUNTING HARDWARE DIMENSIONS in inches [millimeters] Horizontal Thru-Bolt BRACKET X Y Z H MOUNTING C B TYPE SLOT (Threaded Rod Supplied as Standard on HL050 thru HL225 sizes.) 1.063 0.500 0.859 1.000 0.219 x 0.438 0.750 1.375 101 [26.99] [12.70] [21.83] [25.40] [5.56] x [11.11] [19.05] [34.93] B 1.063 0.750 0.859 1.250 0.219 x 0.438 0.750 1.750 0.046 [1.17] H 102 [26.99] [19.05] [21.83] [31.75] [5.56] x [11.11] [19.05] [44.45] C Z Y 1.063 1.250 1.000 1.500 0.281 x 0.563 0.875 2.125 Core Length Plus “X” 103 [26.99] [31.75] [25.40] [38.10] [7.14] x [14.29] [22.23] [53.98] Push-In BRACKET X H Y Z HOLE TYPE (DIA) 0.625 0.672 0.250 0.469 0.161 Z 203 [15.88] [17.07] [6.35] [11.91] [4.09] H 0.375 0.281 0.250 0.344 0.144 204 [9.53] [7.14] [6.35] [8.73] [3.66] Y Core Length 0.813 1.391 0.500 0.688 0.196 x 0.260 Plus “X” 205 [20.64] [35.32] [12.70] [17.46] [4.98 x 6.60] 0.719 0.969 0.375 0.625 0.196 x 0.260 206 [18.26] [24.61] [9.53] [15.88] [4.98 x 6.60] Vertical Thru-Bolt (Threaded Rod Supplied as Standard on HL050 thru HL225 sizes.) Threaded Rod or Screw Centering Washer Mica BRACKET X Washer THREAD TYPE (Approximate) Core 0.438 Length 301 8-32 [11.11] Plus “X” 0.500 303 10-32 [12.70] Lock Washer 0.375 [9.52] min. Nut TECHNICAL SPECIFICATIONS PARAMETER UNIT HL, NHL RESISTOR CHARACTERISTICS Temperature Coefficient ppm/°C ± 90 for 0.1Ω to 0.99Ω; ± 50 for 1Ω to 9.9Ω; ± 30 for 10Ω and above Dielectric Withstanding Voltage V 1000, from terminal to mounting hardware AC Short Time Overload - 10 x rated power for 5 seconds 1/2 Maximum Working Voltage V (P x R) Insulation Resistance Ω 1000 Megohm minimum dry, 100 Megohm minimum after moisture test Operating Temperature Range °C - 55 / + 350 www.vishay.com For technical questions, contact ww2bresistors@vishay.com Document Number: 30208 66 Revision 10-Sep-04 HL, NHL Wirewound Resistors Industrial Power, Tubular (HL), Non-Inductive Tubular (NHL) Vishay Dale MATERIAL SPECIFICATIONS NHL NON-INDUCTIVE Element: Copper-nickel alloy or nickel-chrome alloy, Models of equivalent physical and electrical specifications are depending on resistance value available with non-inductive (Aryton-Perry) winding.They are identified by adding the letter N to the front of the HL type Core: Ceramic, steatite designation (NHL-225 for example). For NHL models maximum resistance values are lower, see STANDARD Coating: Special high temperature silicone ELECTRICAL SPECIFICATIONS table. Standard Terminals: Model “Z” terminals are tinned steel Terminal Bands: Steel Part Marking: DALE, Model, Wattage, Value, Tolerance, Date Code 120 100 80 60 40 20 0 -65 -50 0 50 150 250 350 25 AMBIENT TEMPERATURE IN °C Derating PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal Shock Rated power applied until thermally stable, then a minimum of 15 minutes at - 55°C ± (2.0% + 0.05Ω)∆R Short Time Overload 10 x rated power for 5 seconds ± (2.0% + 0.05Ω)∆R Dielectric Withstanding Voltage 1,000V rms, 1 minute ± (0.1% + 0.05Ω)∆R Low Temperature Storage - 55°C for 24 hours ± (2.0% + 0.05Ω)∆R High Temperature Exposure 250 hours at + 350°C ± (2.0% + 0.05Ω)∆R Moisture Resistance MIL-STD-202 Method 106, 7b not applicable ± (2.0% + 0.05Ω)∆R Shock, Specified Pulse MIL-STD-202 Method 213, 100g’s for 6 milliseconds, 10 shocks ± (0.2% + 0.05Ω)∆R Vibration, High Frequency Frequency varied 10 to 2,000Hz, 20g peak, 2 directions 6 hours each ± (0.2% + 0.05Ω)∆R Load Life 1,000 hours at rated power, + 25°C, 1.5 hours “ON”, 0.5 hours “OFF” ± (3.0% + 0.05Ω)∆R Document Number: 30208 For technical questions, contact ww2bresistors@vishay.com www.vishay.com Revision 10-Sep-04 67 RATED POWER IN %

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products