Elite.Parts

Description

RES 1.0 OHM 5% 10W WIREWOUND AXL

Part Number

CP00101R000JB14

Price

Request Quote

Manufacturer

DALE-VISHAY

Lead Time

Request Quote

Category

PRODUCTS - C

Datasheet

9640541_1.pdf

87 KiB

Download

Extracted Text

CP Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead FEATURES • High performance for low cost • Meets or exceeds requirements of EIA Standard RS-344 • High power to size ratio • Ceramic cases are available with circuit board stand-offs (designated with a - 3 model ending) • Special inorganic potting compound and ceramic case provide high thermal conductivity in a fireproof package STANDARD ELECTRICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS PARAMETER UNIT WIREWOUND GLOBAL POWER RESISTANCE RANGE WEIGHT CHARACTERISTICS MODEL RATING Ω (Typical) P ± 10% Standard, ± 5% Available 40°C Temperature Coefficient ppm/°C ± 600 below 1Ω, W g WIREWOUND* METAL OXIDE* ± 300 1Ω and above CP0002 2 0.1 - 1k 100 - 12k 2.0 Short Time Overload - 5 x rated power for 5 seconds CP0002...3 2 0.1 - 1k 100 - 12k 2.2 Terminal Strength lb 10 minimum CP0003 3 0.1 - 2k 150 - 22k 3.4 CP0003...3 3 0.1 - 2k 150 - 22k 3.6 Operating Temperature Range °C - 65/+ 275 CP0005 5 0.1 - 2.4k 150 - 27k 4.8 Dielectric Withstanding Voltage V 1000 AC CP0005...3 5 0.1 - 2.4k 150 - 27k 5.0 1/2 Maximum Working Voltage V (P x R) CP0007 7 0.1 - 5k 1k - 35k 6.8 METAL OXIDE CP0007...3 7 0.1 - 5k 1k - 35k 7.0 CHARACTERISTICS CP0010 10 0.1 - 7k 1k - 40k 9.5 Temperature Coefficient ppm/°C ± 300 for CP0002 to CP0005; CP0010...3 10 0.1 - 7k 1k - 40k 9.9 ± 400 for CP0007 to CP0020 CP0015 15 0.1 - 8k 1k - 40k 16.8 Short Time Overload - 5 x rated power for 5 seconds CP0015...3 15 0.1 - 8k 1k - 40k 17.4 CP0020 20 0.1 - 10k 1k - 45k 22.8 Terminal Strength lb 10 minimum CP0020...3 20 0.1 - 10k — 23.6 Operating Temperature Range °C - 65/+ 225 CP0022 22 0.1 - 10k — 24.5 Dielectric Withstanding Voltage V 1000 AC CP0022...3 22 0.1 - 10k — 25.3 1/2 Maximum Working Voltage V (P x R) CP0025 25 0.1 - 10k — 37.0 *To specifically order a Wirewound sub-assembly for resistance values NOTE: Wirewound CP resistors can reliably function as a fuse and as that overlap between the Wirewound and Metal Oxide technologies, a resistor. Such components involve compromise between fusing and the model will be a CPxxxx...85 for standard body and CPxxxx...91 for resistive functions; therefore, each design should be tailored to the body with stand-offs. To specifically order a Metal Oxide sub-assembly application to ensure optimum performance. Contact factory by using for resistance values that overlap between the Wirewound and Metal the e-mail address at the bottom of this page for design assistance. Oxide technologies, the model will be a CPxxxx...100 for a standard body and CPxxxx...101 for body with stand-offs. If no dash type is specified, either technology may be supplied. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CP000515R00JB143 (preferred part numbering format) C P 00 05 1 5 R 0 0 J B 1 43 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (See Standard Electrical R = Decimal H = ± 3.0% E14* = Lead free bulk pack (Dash Number) Specifications Global Model K = Thousand J = ± 5.0% E31* = Lead free four layer bulk pack (up to 3 digits) column for options) R1500 = 0.15Ω K = ± 10% B14 = Bulk pack From 1-999 as 1K500 = 1,500Ω B31 = Four layer bulk pack applicable *Lead Free will not be available until Q2 2005 Historical Part Number example: CP-5-3 15Ω 5% B14 (will continue to be accepted) CP-5-3 15Ω 5% B14 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE PACKAGING CODE www.vishay.com For technical questions, contact ww2aresistors@vishay.com Document Number 30213 40 Revision 11-Sep-04 CP Wirewound/Metal Oxide Resistors, Commercial Power, Vishay Dale Axial Lead DIMENSIONS DIMENSIONS in inches [millimeters] GLOBAL MODEL A* B C D E F ± 0.031 ± 0.031 ± 0.031 ± 0.031 ± 0.001 WIRE- METAL CPxxxx [0.794] [0.794] [0.794] [0.794] [0.025] WOUND OXIDE E F A B WIRE- METAL ± 0.125 Typical C WOUND OXIDE [3.175] MINIMUM CP0002 0.688 0.250 0.250 — 0.032 0.032 1.500 0.750 [17.46] [6.35] [6.35] [0.813] [0.813] [38.10] [19.05] CP0002...3 0.688 0.250 0.250 0.313 0.032 0.032 1.500 0.750 CPxxxx...3 [17.46] [6.35] [6.35] [7.94] [0.813] [0.813] [38.10] [19.05] F A Typical CP0003 0.875 0.313 0.313 — 0.036 0.032 1.500 1.000 [22.22] [7.94] [7.94] [0.914] [0.813] 38.10] [25.40] C D CP0003...3 0.875 0.313 0.313 0.375 0.036 0.032 1.500 1.000 0.125 E B [22.22] [7.94] [7.94] [9.52] [0.914] [0.813] [38.10] [25.40] [3.18] Typical CP0005 0.875 0.375 0.344 — 0.036 0.032 1.500 1.000 [22.22] [9.52] [8.73] [0.914] [0.813] [38.10] [25.40] MATERIAL SPECIFICATIONS CP0005...3 0.875 0.375 0.344 0.406 0.036 0.032 1.500 1.000 Element: Wirewound = Copper-nickel alloy or [22.22] [9.52] [8.73] [10.32] [0.914] [0.813] [38.10] [25.40] nickel-chrome alloy, depending on resistance CP0007 1.391 0.375 0.344 — 0.036 0.032 1.500 1.000 value [35.32] [9.52] [8.73] [0.914] [0.813] [38.10] [25.40] Metal Oxide = High temperature fired Metal CP0007...3 1.391 0.375 0.344 0.469 0.036 0.032 1.500 1.000 Oxide film [35.32] [9.52] [8.73] [11.91] [0.914] [0.813] [38.10] [25.40] Core: Wirewound = Woven fiberglass CP0010 1.875 0.375 0.344 — 0.036 0.032 1.500 1.000 Metal Oxide = Alumina ceramic [47.62] [9.52] [8.73] [0.914] [0.813] [38.10] [25.40] Body: Steatite ceramic case with inorganic CP0010...3 1.875 0.375 0.344 0.469 0.036 0.032 1.500 1.000 [47.62] [9.52] [8.73] [11.91] [0.914] [0.813] [38.10] [25.40] potting compound CP0015 1.875 0.500 0.500 — 0.036 0.032 1.500 1.000 End Caps: Tin plated steel [47.62] [12.70] [12.70] [0.914] [0.813] [38.10] [25.40] Terminals: Tinned copper CP0015...3 1.875 0.500 0.500 0.625 0.036 0.032 1.500 1.000 [47.62] [12.70] [12.70] [15.87] [0.914] [0.813] [38.10] [25.40] Part Marking: DALE, Model, Wattage, Value, CP0020** 2.500 0.500 0.500 — 0.036 0.032 1.500 1.000 Tolerance, Date Code [63.50] [12.70] [12.70] [0.914] [0.813] [38.10] [25.40] 120 CP0020...3 2.500 0.500 0.500 0.625 0.036 — 1.500 — [63.50] [12.70] [12.70] [15.87] [0.914] [38.10] 100 CP0022 2.500 0.500 0.500 — 0.036 — 1.500 — [63.50] [12.70] [12.70] [0.914] [38.10] 80 CP0022...3 2.500 0.500 0.500 0.625 0.036 — 1.500 — 60 [63.50] [12.70] [12.70] [15.87] [0.914] [38.10] Wirewound 40 CP0025 2.500 0.625 0.625 — 0.040 — 1.500 — [63.50] [15.87] [15.87] [1.016] [38.10] Metal Oxide 20 *Potting compound may extend outside of ceramic case up to 0.060" [1.52] maximum per side. 0 -65 -25 25 75 125 175 225 275 **Dimensions for the metal oxide are: 40 A = 2.360 [59.94], B = 0.570 [14.48], C = 0.530 [13.46], E = 0.032 [0.813], Derating AMBIENT TEMPERATURE IN °C F = 1.000 [25.40] PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS (EIA-344) Thermal Shock -55°C to + 275°C (+225°C for Metal Oxide), 5 cycles, 30 minute dwell time ± (5.0% + 0.05Ω)∆R Short Time Overload 5 x rated power for 5 seconds ± (4.0% + 0.05Ω)∆R Dielectric Withstanding Voltage 1000V for one minute ± (2.0% + 0.05Ω)∆R rms Low Temperature Operation - 65°C, full rated working voltage for 45 minutes ± (3.0% + 0.05Ω)∆R Humidity 75°C, 90% - 100% RH, 240 hours ± (5.0% + 0.05Ω)∆R Load Life 1000 hours at rated power, + 25°C, 1.5 hours "ON", 0.5 hours "OFF" ± (10.0% + 0.05Ω)∆R Terminal Strength 5 pounds for 30 seconds; body twisted about axis, 3 360° rotations ± (2.0% + 0.05Ω)∆R Resistance to Solder Heat Terminal immersed 3.5 seconds in molten solder at 1/8" to 3/16" from body ± (4.0% + 0.05Ω)∆R Document Number 30213 For technical questions, contact ww2aresistors@vishay.com www.vishay.com Revision 11-Sep-04 41 RATED POWER IN %

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products