Manufacturers
DAKOTA DIGITAL PDR-2
Description
Dakota Digital PDR-2 Solenoid Actuator | High Power
Part Number
PDR-2
Price
Request Quote
Manufacturer
DAKOTA DIGITAL
Lead Time
Request Quote
Category
PRODUCTS - P
Datasheet
Extracted Text
PDR-2 rev. A HIGH POWER SOLENOID ACTUATOR This actuator will release even the most stubborn latches. It has 35 pounds of pull. It is activated to pull in by connecting the black wire to ground and then switching the white wire to 12 volts. The white wire should never be powered for more that a few seconds or it may burn out the solenoid. The heavy duty switch supplied with the system is rated at 40A and can turn the solenoid on directly. The 30 amp relay is provided with the actuator to allow the high current coil to be switched by a lower current switch or remote system. Parts list: Heavy duty, water resistant switch Bolts and lock-nuts for mounting 18” Cable and crimp fittings Fuse holder and 30A fuse 35-pound solenoid Relay for use with remote systems Wiring connectors DO NOT CONNECT BLUE (orange) WIRE * wire colors shown in ( ) are for alternate relay sockets found in some units. Bolt to door skin or panel. 12 VOLTS GREEN WHITE GROUND FUSED AT 30 AMPS BLACK WIRE (Brown) (black) Cable connector GROUND BLACK (yellow) RED WIRE to REMOTE SYSTEM or SWITCH WHITE WIRE 12 VOLTS FUSED AT 30 AMPS Supplied high current switch for solenoid The actuator can be mounted vertically or horizontally. When mounting the actuator, make sure to bolt it in securely. The actuator should be aligned so that the plunger pulls as straight as possible. The plunger should be able to fully pull in when energized. Using a cable to connect the actuator to the latch will usually be the easiest method. Due to the vast number of possible mounting applications we included universal hardware. This hardware might not be adequate for all applications due to the variety of different vehicles and mounting locations. Plan ahead in case of battery failure to have a way to get power to the solenoid or have a mechanical backup. 4510 W. 61ST St. N., Sioux Falls, SD 57107 Phone: (605) 332-6513 FAX: (605) 339-4106 www.dakotadigital.com dakotasupport@dakotadigital.com MANUAL #650169 ©Copyright 2005 Dakota Digital Inc.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PDR-2 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods