DE-530CT+ Powerful Bus Master DE-530 CT Performance Ethernet Combo PCI NIC The DE-530+ series Ethernet 32-bit, Bus Mastering (1 adapters are engineered to RJ-45 & 1 BNC) unlock the power of systems equipped with Peripheral Ethernet 32-Bit PCI Bus Component Interface (PCI) Master Adapter. expansion slots. Supporting 486 and Pentium bus speeds Settings are plug-and- up to 33MHz, these adapters play via the motherboard. operate in the 32-bit bus Based on the DEC master mode, delivering data DC21040 Ethernet throughput at multi-megabits controller. per second with little stress on the host's CPU. Diagnostics and 3 LED's included for Full-duplex Operation troubleshooting. At 20 Mbps full duplex, the adapters provide a robust Bus Mastering and shared performance in a very heavy memory technology for throughout environment. With low CPU overhead. DMA bus operation in burst mode, these adapters are Two independent FIFO mandatory for applications buffers for increased with large file transfer and performance. heavy disk I/O in the server. DMA bus operation with PCI 32-bit bus mastering Burst Mode. adapter with RJ45 and BNC Windows 95 Plug-N-Play compliant auto configuration. ISO 9001 Certified Manufacturing Facility. For more information contact a D-Link Sales representative, 32-bit bus-mastering PCI. 800-326-1688 or e-mail us at sales@dlink.com. PCI jumperless card offers set-up through For technical support click motherboard. here. You may contact technical support at 714-788- Ethernet IEEE 802.3 0805 (option #4) or -mail 10Mbit/sec hardware tech@dlink.com. spec. compliant. Multi-thread operation. Driver and card support full-duplex. Low Ethernet command processing overhead (low CPU utilization). Supports virtual memory. Connector set by drivers. Supports RJ-45 data jack for UTP Cat. 3,4,5 (Ethernet Star Topology). Supports BNC balun jacks for Coax RG-58A/U (Ethernet Bus Topology). ((Zpet[Back]))) 4-layer small PCB for small compartments. LED's inc.: TX/RX, Link, & UTP/BNC. Basic Info  Diagnostics and 3 LEDs included for troubleshooting.  Settings are plug-and-play via the motherboard. Based on the DEC DC21040 Ethernet controller. System Requirements:  Intel Pentium/486 compatible PCI based motherboards  Driver Dependent supports (DOS, OS/2, NT, UNIX...) Technical Summary:  32-bit bus-mastering PCI  PCI jumperless card offers set-up through motherboard  Ethernet IEEE 802.3 10Mbit/sec hardware spec. compliant  Multi-thread operation  Driver and card support full-duplex  Low Ethernet command processing overhead (low CPU utilization)  Supports virtual memory  Connector set by drivers  Supports RJ-45 data jack for UTP Cat. 3,4,5 (Ethernet Star Topology)  Supports BNC balun jacks for Coax RG-58A/U (Ethernet Bus Topology)  4-layer small PCB for small compartments  Lifetime Warranty  LEDs inc.:TX/RX, Link, & UTP/BNC Hardware Settings:  Card Config.- Bus Master, by motherboard  Buffer Memory-256 FIFO  IRQ- Motherboard dependent, Level and Edge  INT-A  I/O Ports- Set by PCI Slot spec.  MEM-This card doesn't use any memory location.  DMA-None Hardware Attributes:  Item Dimension-5"x3.5"  Item Weight-3.5 oz  Ship Dimension-9"x5.9"x1.5"  Ship Weight-.8 lbs.  MTBF-50K hours  Power Consumption-Typ. 700mW,Max. 800mW  Ambient Temperature- 32'F to 131'F  Storage Temperature- -4'F to 176'F  Humidity: 10% to 90% non-condensing