CUI INC VFSD1-S24-S15-SIP-A-ND
Description
CUI Inc VFSD1-S24-S15-SIP-A-ND CONVERTER DC/DC 15V OUT 1W HIGH EFF | Series - VFSD1-SIP | Type - Isolated Module | 21.6V - Minimum Voltage Input | 26.4V - Maximum Voltage Input | 67mA - Maximum Current Output | 1W - Power (Watts) | 3kV - Isolation Voltage (3000V - Isolation Voltage) | 0.77"" L x 0.24"" W x 0.39"" H (19.6mm x 6.0mm x 10.0mm) - Dimensions | Operating Temperature; -40 C ~ 85 C
Part Number
VFSD1-S24-S15-SIP-A-ND
Price
Request Quote
Manufacturer
CUI INC
Lead Time
Request Quote
Category
PRODUCTS - V
Features
- 3K Vdc isolation
- High efficiency to 80%
- Industry standard pinout
- Isolated 1 W output
- Low cost
- No external component required
- No heatsink required
- Power density 0.85 W/cm³
- Single voltage output
- SIP package style
- Small footprint
- Temperature range: -40°C~+85°C
- UL94-V0 package
- Unregulated
Datasheet
Extracted Text
1/ 3
VFSD1-SIP Series Dc-Dc Converter
Rev. 12-2005
Description Features
Designed to convert fixed volt- ·Isolated 1 W output
ages into an isolated voltage, the ·Temperature range: -40°C~+85°C
VFSD1-SIP series is well suited for ·Unregulated
providing board-mount local sup- ·High efficiency to 80%
plies in a wide range of applica- ·Single voltage output
tions, including mixed analog/digi- ·Small footprint
tal circuits, test & measurement ·SIP package style
equip., process/machine controls, ·Industry standard pinout
datacom/telecom fields, etc... ·UL94-V0 package
·No heatsink required
The semi-regulated output can be ·3K Vdc isolation
followed by 3-terminal regulators ·Power density 0.85 W/cm³
to provide output protection, in ·No external component required
addition to output regulation. ·Low cost
Model Input Voltage Output Output Current Package
Number Nominal Range Voltage Max. Min. Efficiency Style UL60950
VFSD1-S3.3-S3.3-SIP 3.3 Vdc 3.00~3.60 Vdc 3.3 Vdc 300 mA 30 mA 72% SIP NO
VFSD1-S3.3-S5-SIP 3.3 Vdc 3.00~3.60 Vdc 5 Vdc 200 mA 20 mA 73% SIP NO
VFSD1-S5-S3.3-SIP 5 Vdc 4.5~5.5 Vdc 3.3 Vdc 300 mA 30 mA 72% SIP NO
VFSD1-S5-S5-SIP 5 Vdc 4.5~5.5 Vdc 5 Vdc 200 mA 20 mA 78% SIP YES
VFSD1-S5-S9-SIP 5 Vdc 4.5~5.5 Vdc 9 Vdc 111 mA 12 mA 78% SIP YES
VFSD1-S5-S12-SIP 5 Vdc 4.5~5.5 Vdc 12 Vdc 83 mA 9 mA 80% SIP YES
VFSD1-S5-S15-SIP 5 Vdc 4.5~5.5 Vdc 15 Vdc 67 mA 7 mA 81% SIP NO
VFSD1-S5-S24-SIP 5 Vdc 4.5~5.5 Vdc 24 Vdc 42 mA 5 mA 78% SIP NO
VFSD1-S12-S3.3-SIP 12 Vdc 10.8~13.2 Vdc 3.3 Vdc 300 mA 30 mA 73% SIP NO
VFSD1-S12-S5-SIP 12 Vdc 10.8~13.2 Vdc 5 Vdc 200 mA 20 mA 79% SIP YES
VFSD1-S12-S9-SIP 12 Vdc 10.8~13.2 Vdc 9 Vdc 111 mA 12 mA 79% SIP YES
VFSD1-S12-S12-SIP 12 Vdc 10.8~13.2 Vdc 12 Vdc 83 mA 9 mA 81% SIP YES
VFSD1-S12-S15-SIP 12 Vdc 10.8~13.2 Vdc 15 Vdc 67 mA 7 mA 81% SIP YES
VFSD1-S12-S24-SIP 12 Vdc 10.8~13.2 Vdc 24 Vdc 42 mA 5 mA 79% SIP NO
VFSD1-S15-S3.3-SIP 15 Vdc 13.5~16.5 Vdc 3.3 Vdc 300 mA 30mA 73% SIP NO
VFSD1-S15-S5-SIP 15 Vdc 13.5~16.5 Vdc 5 Vdc 200 mA 20 mA 74% SIP NO
VFSD1-S15-S9-SIP 15 Vdc 13.5~16.5 Vdc 9 Vdc 111 mA 12 mA 75% SIP NO
VFSD1-S15-S12-SIP 15 Vdc 13.5~16.5 Vdc 12 Vdc 83 mA 9 mA 79% SIP NO
VFSD1-S15-S15-SIP 15 Vdc 13.5~16.5 Vdc 15 Vdc 67 mA 7 mA 79% SIP NO
VFSD1-S15-S24-SIP 15 Vdc 13.5~16.5 Vdc 24 Vdc 42 mA 5 mA 79% SIP NO
VFSD1-S24-S3.3-SIP 24 Vdc 21.6~26.4 Vdc 3.3 Vdc 300 mA 30 mA 73% SIP NO
VFSD1-S24-S5-SIP 24 Vdc 21.6~26.4 Vdc 5 Vdc 200 mA 20 mA 79% SIP YES
VFSD1-S24-S9-SIP 24 Vdc 21.6~26.4 Vdc 9 Vdc 111 mA 12 mA 80% SIP YES
VFSD1-S24-S12-SIP 24 Vdc 21.6~26.4 Vdc 12 Vdc 83 mA 9 mA 80% SIP YES
VFSD1-S24-S15-SIP 24 Vdc 21.6~26.4 Vdc 15 Vdc 67 mA 7 mA 80% SIP YES
VFSD1-S24-S24-SIP 24Vdc 21.6~26.4 Vdc 24 Vdc 42 mA 5 mA 80% SIP NO
Output Specifications
Item Test conditions Min. Typ. Max. Units
Output power 0.1 1 W
Line Regulation For Vin change of 1%, full load 1.2%
Load Regulation 10% to 100% full load, nominal line 10% 15%
Output voltage accuracy See tolerance envelope graph
Temperature drift @ 100% load 0.03 %/°C
Output ripple 20 MHz Bandwidth 50 75 mVp-p
Switching frequency Full load, nominal input 100K 150K 200K Hz
V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 www.v-infinity.com 1-866-372-1258
2/ 3
VFSD1-SIP Series Dc-Dc Converter
Rev. 12-2005
General Specifications
Short circuit protection <1 second
Temperature rise at full load 25°C Max, 15°C Typ.
Cooling Free air convection
Operating temperature range -40°C to +85°C
Storage temperature range -55°C to +125°C
Soldering temperature 300°C (1.5mm from case for 10 sec.)
Storage humidity range <95%
Case material Plastic (UL94-V0)
MTBF >1,000,000 hrs.
Burn-in Full load at +85°C, for 4 hours at no-load and 4 hours at full load.
Isolation Specifications
Item Test Conditions Min. Typ. Max. Units
Isolation Voltage Tested for 1 min. 3000 Vdc
Insulation Resistance Test at 500 Vdc 1000 M Ω
Note:
1. All specifications measured at TA=25°C, humidity <75%, nominal input voltage and rated output load unless
otherwise specified.
Typical Characteristics
Outline Dimensions &
Recommended Layout Pattern
Side View Layout
19.60
2.54
2.54
12 5 7
10.00
4.10
Pin Function
Bottom View
1 +Vin
2 -Vin
1.25
6.00
12 5 7 5 -Vout
7 +Vout
2.00 15.24
Note: All Pins on a 2.54mm pitch; All Pin diameters are 0.50 mm; all dimensions in mm.
V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 www.v-infinity.com 1-866-372-1258
3/ 3
VFSD1-SIP Series Dc-Dc Converter
Rev. 12-2005
- Minimum loading
Application Notes:
The converter needs a minimum of 10% loading to
maintain output regulation. Operation under no-load
- Input filtering
conditions will not cause immediate damages but
To reduce the reflected ripple current and minimize
may reduce reliability, and cause performance not to
EMI, especially when the converter input is more
meet specifications.
than 2” away from the DC source, it is recommended
to connect a low ESR electrolytic capacitor between
- Regulation
Vin and Gnd. The values suggested are as shown in
With a semi-regulated design, the converter’s output
Table 1. If additional filtering is required, the
voltage varies with load current and will change
capacitance may be increased, or expanded to an LC
proportionally to the input voltage. If regulated
network as shown in Figure 1.
output is needed, an external regulator can be used
Table 1
as shown in Figure 2.
Input Voltage External Input Capacitance
- Protection
The converter has minimal protection against input
3.3, 5 V 4.7 µF
over-voltage or output over-load, and may be
12 V 2.2 µF
permanently damaged if exposed to these conditions.
15 V 2.2 µF An input clamping device can be used for input
voltage limiting. An input fuse or an output fuse
24 V 1.0 µF
can also be used to protect against over-loading.
- Output filtering
- External Regulator
An output capacitor is needed to meet output ripple
An external 3-terminal regulator can be connected
requirements as shown in Table 2.
to the output of the converter to achieve full
Output capacitance may be increased for additional
regulation. Make sure the converter’s output voltage
filtering, but should not exeed 10µF or expanded to
provides sufficient head room for the regulator. An
an LC network as in Figure 1.
additional benefit is that the built-in protection
features in the regulator, such as OCP, OTP, etc, will
Table 2
protect the converter also. In a complimentory
supply, a negative output regulator must be used to
External Ouput Capacitance
Vout
achieve the negative regulated output.
3.3, 5 V 4.7 µF
9 V 2.2 µF
+Vout
+Vin REG
DC DC
12 V 1.0 µF
-Vin
-Vout
15 V 0.47 µF
+Vout
REG
24 V 0.33 µF +Vin
DC DC
-Vin
-Vout
L
L
+Vout
+Vin
C
C
DC DC
-Vin
-Vout
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the VFSD1-S24-S15-SIP-A-ND have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers





What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods