CTS 636L3C048M00000

Description
OSC CLOCK 48.000000 MHZ 3.3V SMD
Part Number
636L3C048M00000
Price
Request Quote
Manufacturer
CTS
Lead Time
Request Quote
Category
PRODUCTS - 6
Datasheet
Extracted Text
Model 636 5x3.2mm Low Cost Clock Oscillator ¨ Stability to ±25 PPM ¨+3.3Vdc or +5.0Vdc Operation ¨HCMOS Output ¨Operating Temperature to –40°C to +85°C ¨Output Enable Standard ¨Tape & Reel Packaging Electrical Characteristics Parameter Symbol Min Typical Max Unit Output Frequency Range fO Model 636S 1.5 - 44.736 MHz Model 636L 1.5 - 44.736 Stability Df/f (Note 1) - - 25, 50 or 100 ppm Operating Temperature T A Commercial -20 - 70 °C Industrial -40 - 85 Supply Voltage V CC Model 636S 4.5 5.0 5.5 V Model 636L 2.97 3.3 3.63 Operating Supply Current ICC Model 636S - - 30 mA Model 636L - - 20 Output Load Model 636S - - 50 pF Model 636L - - 15 Output Voltage Levels Logic '1' Level I = -16mA (636S) / -8 mA (636L) V 0.9 * Vcc - - V OH OH Logic '0' Level I = +16mA (636S) / +8 mA (636L) V - - 0.1 * Vcc OL OL Output Duty Cycle SYM (@ 50% Level) 45 - 55 % Output Transition Times Rise & Fall Time (10% - 90% of waveform) T T - - 5 nS R, F Start Up Time - - - 10 mS Tri-state – Oscillator Stop Enable Input Voltage V 2.0 - - V IH Disable Input Voltage V - - 0.8 V IL Standby Current I - - 15 uA ST Enable Time t - - 10 mS PLZ Phase Jitter (Bandwidth 12 KHz – 20 MHz) t - < 1 - pS RMS jrms Notes: 1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and first year aging at an average operating temperature of 40 °C. ¨ ¨ ¨ CTS Communications Components, Inc. ¨ 171 Covington Drive ¨ Bloomingdale, IL 60108 ¨ 630-924-3500 ¨ ¨ ¨ Document No. 008-0250-0 Page 1 of 3 Rev. A ECO # 16710 Model 636 5x3.2mm Low Cost Clock Oscillator ORDERING INFORMATION 636 M Supply Voltage Frequency in MHz L = +3.3Vdc M – Indicates decimal point. S = +5.0Vdc Record frequency with all significant digits indicated by a . Frequency Stability Operating Temperature Range 5 = ±25 ppm C = -20°C to +70°C 3 = ±50 ppm I = -40°C to +85°C 2 = ±100 ppm Example P/N: 636L3C032M76800 MECHANICAL SPECIFICATIONS Suggested Pad Geometry ( 5.0 ±0.2 ) ( 1.2 ) Dimensions in Inches [MM] 0.197 ±0.008 PIN 1 IDENTIFIER 0.047 0.055 [ 1.40 ] ( 1.0 ) 0.039 3 4 0.047 [ 1.20 ] CTS ** YWW ( 3.2 ±0.2 ) ( 2.20 ) 0.126 ±0.008 0.087 2 1 · 32M7680 0.087 [ 2.20 ] ( 2.54 ) 0.100 ( 1.2 ) MAX ( MM ) 0.047 Key: Inch 0.100 [ 2.54 ] ** Manufacturing Site Code. Frequency shall be marked Pin Symbol Functional Description Enable Truth Table With 4 significant digits to the 1 EOH Enable Pin 1 Pin 3 Right of the “M”. “1” Output 2 GND Circuit and Package Ground “0” High Imp. 3 Output RF Output Terminations plated with Open Output 4 Vcc Supply Voltage 0.3 – 1.0 um gold (Au). QUALITY AND RELIABILITY Quality Systems meet or exceed the requirements of ISO 9000: 2000 standards. Reliability Audits are performed on this or similar products with results available upon request. ¨ ¨ ¨ CTS Communications Components, Inc. ¨ 171 Covington Drive ¨ Bloomingdale, IL 60108 ¨ 630-924-3500 ¨ ¨ ¨ Document No. 008-0250-0 Page 2 of 3 Rev. A ECO # 16710 Model 636 5x3.2mm Low Cost Clock Oscillator ENVIRONMENTAL SPECIFICATIONS § Storage Temperature: -55°C to +125°C § Temperature Cycle: 400 cycles, -55°C to +125°C, 10 min dwell, 1 min transfer § Mechanical Shock: 1,500g’s, 0.5mS, ½ sinewave, 3 shocks each direction, in 3 planes § Sinusoidal Vibration: 0.06” D.A., 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles per plane § Gross Leak: No leak shall appear while immersed in an FC40 or equivalent liquid at 125°C for 20 seconds -8 § Fine Leak: Mass spectrometer leak rates less than 2x10 cc/sec air equivalent § Resistance to Soldering Heat: Product must survive 3 reflows of 260°C peak, 10 seconds maximum § High Temperature Operating Bias: 2,000 hours at 125°C, disregarding frequency shift § Frequency Aging: < 5 ppm shift in 1,000 hours at 85°C Suggested Reflow Profile 300 Maximum 260°C, 10 seconds Typical 225°C 200 Temp. 130°C (°C) 100 0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 Time (Seconds) TAPE AND REEL INFORMATION 17.5 2.0 Ø13 4.0 8.0 Ø1.50 1.39 1.75 1.19 120° 16.0 5.69 Ø180 Ø60 5.49 3.74 3.54 Ø23 DIRECTION OF FEED Dimensions in Millimeters Device quantity shall be 1,000 pieces on a 180mm reel. ¨ ¨ ¨ CTS Communications Components, Inc. ¨ 171 Covington Drive ¨ Bloomingdale, IL 60108 ¨ 630-924-3500 ¨ ¨ ¨ Document No. 008-0250-0 Page 3 of 3 Rev. A ECO # 16710
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the 636L3C048M00000 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods