Stockpickers 3000 lb capacity SP 3000 Series Specifications SP 3000 Series Poly Wheels 17 18 2.5" x 2" when is less than + 8.5 17 18 4" x 2" when is greater than + 8 16 24–30" 40" 19 18 17 adjustable 4" 4" 4" x 2" 79" 87" LC 12 36" 24" 11 7.5 " 24" 27" 14 5" 2" 10 3.7" 7" 2" 6" 3" 13" x 5.5" 6" x 2.8" 9.5" 15 10" 13 SP 3000 Series Specifications 1 Manufacturer Crown Equipment Corporation 2 Model SP 3010-30 3 Load Capacity* lb 3000 4 Load Center Platform face to load CG in 24 5 Power Electric Volts 24 6 Operator Type Stand-up Rider Stockpicker 7 Tire Type Load/Drive Poly/Poly 8 Wheels (x = driven) Load/Drive 4/1x 10 Lift Height in See Chart** 13 Head Length TL/TT in 74.6/75.6 14 Forks Standard L x W x T in 36 x 4 x 2 Optional Lengths in 30, 39, 42, 45, 48, 54, 60, 72, 84 15 Wheelbase TL/TT in 52/51 16 Turning Radius TL/TT in 69/68 20 Speed Travel Empty/Loaded mph See Chart 21 Speed Lift TL Empty/Loaded fpm 45/28 TT Empty/Loadedfpm 40/26 22 Speed Lower TL Empty/Loaded fpm 40/38 TT Empty/Loaded fpm 40/38 23 Battery Type Lead Acid Min Weight/Max Amp 1520/1085 Max Battery Size 14.25 x 36.25 x 31 high 24 Traction Motor 60 Min Rating hp 3.5 * Contact factory. Capacity may be subject to derating. **Not available above 240" lifting heights. TL 10 Lift Height in 136 148 172 194 214 Free Lift in 3 6 6 6 6 11 Collapsed Height in 89.5 95 107 119 131 12 Extended Height in 223 235 259 281 301 18 Straddle Width in 42 42 42 42 42 19 Operator Compartment Width in 42 42 42 42 42 17 Aisle Guide Wheel Range† in 47.75 to 65.25 47.75 to 65.25 47.75 to 65.25 47.75 to 65.25 47.75 to 65.25 Truck Weight without Battery lb 5183 5248 5377 5666 5795 † In .5" increments. †† 3000 lb at 240", 2000 lb at 276". ††† 3000 lb at 240", 2000 lb at 276", 1500 lb at 312". Battery Performance Dimensions General Information Mast Crown Equipment Corporation Crown Equipment Corporation Crown Equipment Corporation 1 SP 3015-30 SP 3020-30 SP 3040-30 2 3000 3000 3000 3 24 24 24 4 24 24 24 5 Stockpicker Stockpicker Stockpicker 6 Poly/Poly Poly/Poly Poly/Poly 7 4/1x 4/1x 4/1x 8 See Chart** See Chart See Chart 10 74.6/75.6 74.6/75.6 74.6/75.6 13 36 x 4 x 2 36 x 4 x 2 36 x 4 x 2 14 30, 39, 42, 45, 48, 54, 60, 72, 84 30, 39, 42, 45, 48, 54, 60, 72, 84 30, 39, 42, 45, 48, 54, 60, 72, 84 52/51 52/51 52/51 15 69/68 69/68 69/68 16 See Chart See Chart See Chart 20 45/28 45/28 Low, 80/46 High 45/28 Low, 80/46 High 21 40/26 40/26 Low, 71/43 High 40/26 Low, 71/43 High 40/38 40/38 Low, 80/75 High 40/38 Low, 80/75 High 22 40/38 40/38 Low, 80/75 High 40/38 Low, 80/75 High Lead Acid Lead Acid Lead Acid 23 1520/1085 1520/1085 1520/1085 14.25 x 36.25 x 31 high 14.25 x 36.25 x 31 high 14.25 x 36.25 x 31 high 4.0 3.5 4.0 24 TT 195 210 240 276 †† 312 ††† 3 8 20 32 44 89.5 95 107 119 131 283 298 328 364 400 42 42 42 48 54 42 42 42 48 54 47.75 to 65.25 47.75 to 65.25 47.75 to 65.25 53.75 to 65.25 59.75 to 65.25 5753 5846 6072 6443 6661 SP 3000 Series Specifications Travel Speeds - Models 3010, 3015, 3020, 3040 Lift Height Steered Wheel < 10° Steered Wheel ‡10° (inches) Travel Speed (mph) Brake Travel Speed (mph) Brake Empty/Loaded Force Empty/Loaded Force 0-24 6.0/5.3 3/3 6.0/5.3 3/3 25-60 6.0/5.3 3/3 3.8/3.2 3/3 61-120 3.8/3.2 2/3 2.7/2.2 2/3 121-150 2.7/2.2 2/3 1.9/1.5 1/3 151-180 1.9/1.5 1/3 1.5/1.2 1/3 181-312 1.5/1.2 1/3 See Note Note: Steering is automatically limited to within 10° straight travel above 180". SP 3000 Series Technical Information Human Factor Standard Equipment Optional Equipment 18. Electronic on-demand power The operator area is designed for 1. 24-volt electrical system. 1. Wire guidance. steering. maximum visibility and stability 2 GE EVT-100 FL transistor 2. Aisle guide wheels for rail 19. Emergency power cut-out. for increased operator confidence control. guidance. 20. Hinged side gate with power and comfort. 3. Start up and run time 3. Motor brush wear indicators disconnect. diagnostics. and motor temperature indi- 21. Upper elevation travel. The operator platform features a 4 Programmable performance cators. (Only available on 22. Elevated Braking System large window, (1088 sq in), for features. SP 3015 and SP 3040.) (EBS) with low profile brake excellent visibility. A Crown- 5. Information Display Panel in 4. Battery retainer interlock pedal. designed clear-visibility mast operator platform. switch. 23. 6" diameter tandem load affords the platform window one 6. Elapsed time counter. 5. Work lights, dome light and wheels. forward and two peripheral win- 7. Battery discharge indicator two-speed fan. 24. Lift off left and right side steel dows for maximum visibility even with lift interrupt. 6. Spotlights. battery covers. when the platform is lowered. 8. Drive tire direction indicator. 7. Flashing amber light. 25. Adjustable battery retainer. The clear-visibility mast, with full 9. Hour meters for key on, 8. Fork raise and/or lower cut- 26. Hinged, lift off steel power free lift, extends the platform traction, lift and steer motors. out with or without override. unit doors. window above the mast channels 10. 14.25" battery compartment. 9. Zone select key switch. 27. Cushioned floorboard. for unobstructed visibility when 11. 350 amp battery connector. 10. 48", 54" and 60" wide oper- 28. Soft urethane twist grip with raised. 12. 2.75" diameter battery ator platforms. “cam grip”. compartment rollers. 11. Corrosion conditioning. 29. 10 degree angled steer A low profile power unit, low 13. Top battery access for service. 12. Freezer conditioning. wheel with soft feel spinner. placement of the lower cross 14. Color coded wiring. 13. Wire mesh screen. (Standard 30. Clear visibility platform brace and an outer C-channel 15. Key switch. with freezer conditioning). window. rail assembly also contribute to 16. Horn. 14. Retractable tether. 31. Clear visibility mast design. excellent visibility. 17. Strobe light. 15. Load wheel and drive tire 32. Storage compartment. compounds. 33. Operator safety belt and 16. 30" lanyard boom. lanyard. 17. Special paint. 34. Pallet clamp. 18. Fire extinguisher. SP 3000 Series Technical Information Human Factor - Con’t. Information Display Panel Elevated Braking System duty pin hinges cover power unit A soft urethane twist grip is solidly The Information Display Panel (EBS) componentry. Doors swing wide mounted to the truck console to travels with the operator at all Exclusive three force levels of for open access. Doors can also provide excellent stability for the times. Features include audible braking, determined by platform be lifted off for unrestricted ser- operator during travel, plugging and visual prompts for the opera- height, provides smooth braking vice access. Door bolts have ex- and braking. Controls for lift/lower, tor, steer wheel direction indicator, at all elevations. Electric disc brake, clusive convex design that mates horn and emergency disconnect battery fuel gauge with lift inter- spring applied and electrically re- with concave door holes for fast are conveniently located for rupt, wire guidance status lights, leased, is controlled by pedal in re-installation of door bolts. Bat- efficient operation and minimal hour meters for all motors, elapsed platform. Pedal cuts traction tery side covers are all steel. An operator fatigue. The steering time counter, optional battery power and activates brake when optional battery retainer interlock wheel is angled at 10° and re- retainer interlock light, optional released. Brake system elimi- switch is available. Top battery cessed to maximize the work brush wear indicators and motor nates hydraulic lines running in access is available by lifting cover. area and reduce steer effort. The temperature indicators and op- mast to control braking. Braking Cover has integral support post. steering wheel and spinner knob tional fork height “zone select” can also be accomplished by Wheels and Tires are covered with soft urethane to control. proportional plugging which per- Polyurethane drive tire, 13" reduce grip force and insulate mits the operator to control the The Service Terminal also pro- diameter x 5.5" wide x 8" hub against vibration. Control location rate of deceleration when extended vides extensive service history diameter. Tandem load wheels keeps the operator’s posture stopping distance is preferred. information as well as “real time” 2.8" wide, 6" diameter polyure- neutral at all times. The platform electrical system diagnostics and Simplified Hydraulics thane. Optional aisle guide cushion absorbs shock and fault isolation information for Heavy duty series wound pump wheels 2" wide x 4" diameter vibration. The brake pedal has a servicing. motors and gear pumps are as- polyurethane, 2" wide x 2.5" low profile design and when en- sembled into an integral unit. diameter polyurethane. Enhanced and gaged is flush with the platform Optional high speed lift version is Interchangeable Drive Unit Forks cushion for maximum comfort. available. Crown-manufactured Crown-manufactured drive unit 2" thick x 4" wide forged steel. Heavy-duty side gates, with two solenoid type manifolds with uses spiral bevel and helical gears Fork spread (adjustable) 24" to horizontal and one vertical sup- built-in checks and relief valves. from motor to drive wheel axle. 30". Standard length is 36". port rails, communicate security Maximum lowering speed is regu- Fixed, mounted drive motor does Optional lengths available. to the operator. Cut-out switches lated by a pressure compensat- not rotate minimizing wear on disengage truck operation when Pallet Clamp ing flow control valve. Velocity electrical cables. Drive tire chang- side gates are raised for maxi- Standard equipment includes a fuses are used in all cylinders to ing is simplified with this new mum safety. Two work lights, two foot applied, hand released pallet stop lowering should lowering drive unit. Crown Turret Trucks dome lights and a two-speed fan clamp designed for use with speed exceed a pre-set value due and Reach Trucks also use this are optional. “Power-on” key pre- pallets having center stringers. to a line rupture. A hydraulic drive unit. vents unauthorized operation of accumulator is used to cushion Safety Shield the truck; start position initializes Travel System raise and lower functions. Manual Safety glass to protect operator truck “self-test”. The new Infor- Traction control uses the GE EVT- lowering control on manifold block from chains and moving parts mation Display Panel provides 100 FL micro-processor based allows lowering of platform from while in his normal operating concise, clear feedback for the transistor control. Smooth, quiet ground level. Oil reservoir is de- position. operator during truck operation. operation, extended battery shift signed with a 100 mesh screen at Other Options life and component protection/ Responsibly Innovative the fill location, a suction strainer, 1. Audible Travel Alarm. truck reliability are all features of Electronics spin-on type 10 micron return line 2. Contact factory for additional this GE system. System features Environmentally hardened heavy filter and a magnetic drain plug. options. include a 450 amp rating, a by- duty 24-volt electrical system. An The Crown Mast Assembly pass contactor, truck perfor- intelligent, networked Control Safety considerations and dangers High visibility two- and three- mance adjustability, SRO, ramp System is used to provide real associated with audible travel stage masts feature nested rail start, diagnostics with 16 fault time truck control, display, diag- alarms include: design with lift cylinders posi- memory in conjunction with the nostics and calibration. A distrib- tioned behind mast rails. Three • Multiple alarms can cause service light. Traction is connect- ution panel provides a central stage mast has a low center posi- confusion. ed to the Control System for full location for troubleshooting, re- tion cylinder for free lift. Improved • Workers ignore the alarms diagnostics and set-ups via the duces wiring requirements, and mast cable life due to larger, 5" after day-in and day-out Crown Service Terminal. enables future options to be diameter pulleys. Routing of hos- exposure. added easily. The Control System Responsive Steering ing and cables optimizes visibility • Operator may transfer the can be accessed by the Service Standard on the SP 3000 Series through mast. Built-in sensors responsibility for “looking out” Terminal to provide calibration of is electronic on-demand power detect chain slack and shut down to the pedestrians. truck parameters and optional steering that is microprocessor- primary lower function. Exclusive • Annoys operators and features set-up. The Control Sys- based. Steering wheel rotation spring-loaded staging bumpers pedestrians. tem is also used to extract service provides smooth, operator feed- virtually eliminate platform impact diagnostic and management Dimensions and performance back. Steer effort is minimal, lock as platform stages. Negative rail data. The link-up port is conven- data given may vary due to manu- to lock revolutions is 4.5 turns. drop allows shimming of mast iently located on the platform and facturing tolerances. Performance Drive wheel rotates a full 180° for rollers without major disassembly. is easily accessible without re- is based on an average size vehicle maximum maneuverability. Auto Stronger Low Profile moval of covers for connection. and is affected by weight, condi- centering drive tire for trucks Power Unit tion of truck, how it is equipped equipped with rail guidance. The Crown Program Analysis Power unit is fabricated from and the conditions of the operating Steering is connected to the Cartridge (PAC) works in con- heavy gauge steel. Lower skirt is area. Crown products and speci- Control System for full diagnos- junction with the Service Terminal .75" steel that runs 9" high for fications are subject to change tics and operator interface. and ensures users simple, fast component protection. Rugged without notice. Crown PAC also interfaces with program upgrade of systems. steel doors suspended on heavy steering system for fast upgrade. New Bremen, Ohio 45869 USA Phone: 419/629-2311 SF-12226 Rev. 1/96 Fax: 419/629-3796 Printed in U.S.A. Telex: 24-2425