Elite.Parts Manufacturers C CROUSE HINDS RPCK541 154 P04A
About product Datasheet FAQ

CROUSE HINDS RPCK541 154 P04A

Description

RPC PLG 041 SHL SIZE-ARKTROL N

Part Number

RPCK541 154 P04A

Price

Request Quote

Manufacturer

CROUSE HINDS

Lead Time

Request Quote

Category

PRODUCTS - R

Datasheet

pdf file

Crouse Hinds-ARK-trol RPC_RPE Special Purpose Power Connectors-ds1-1742259437.pdf

1344 KiB

Extracted Text

1392-1393.qxp 6/13/2011 12:10 PM Page 1392 8P Special Purpose Plugs and Receptacles Application Applications: Special purpose plugs and receptacles listed in this section are for use in non- hazardous areas, where environmental or application considerations require non- standard plugs and receptacles. Included ® in this section are ARK-trol plugs and receptacles (RPC and RPE). ARK-trol Plugs and Receptacles (RPC and RPE): • Are used with a wide range of equipment requiring a variety of contact configurations under conditions of hard usage and exposure to rigorous environments. • Two basic types: RPC – circuit breaking power connectors; RPE – control circuit, power and welding connectors. RPC – A variety of configurations (with a maximum of five-poles) are available for one and three-phase circuits. Electrical range is 30, 60, 100, 200 amperes at a maximum of 600 VAC. RPE – A wider range of configurations are available, including options with up to 39 pins. Both types are available (either as standard or as option) with solder well terminals for high reliability, or crimp or pressure terminals for ease of installation. Listings on the following pages show complete assemblies with mating plugs and components. For information on features, options, components and complete assemblies, see pages 1393–1395. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1392 8P 8P ® ARK-trol Electrical Connectors 8P RPC Circuit Breaking Power Connectors RPE Control Circuit and Power Connectors contacts are available in all sizes and Applications: Standard Materials: configurations. Pressure contacts, due to ARK-trol RPC circuit breaking power • Back boxes and adapters – increased terminal area, are available connectors and RPE control circuit power copper-free aluminum only in certain assemblies as shown in connectors are used: • Plug, receptacle and cord connector the listings. • With a wide variety of portable electrical shells – impact extruded aluminum • For cable strain relief and watertight equipment • Insulation – diallyl phthalate (DAP) seal, plugs and cord connector • For connection of devices ranging from receptacles are provided with gland nut • Insulation – fiberglass-reinforced simple lighting units, power tools, and and tapered neoprene bushing. polyester material similar portables requiring only a power • Contacts are removable and, for ease of • Sealing wafer – silicone rubber supply circuit, to sophisticated control installation, are snapped into the insert • Contacts – hard drawn copper and instrumentation assemblies requiring assemblies after wire termination. disconnect Termination methods employed are Standard Finishes: • Under conditions of hard usage and solder, crimp and pressure. Solder well • Copper-free aluminum – natural where exposed to dust, dirt, water, contacts are standard and are furnished corrosion and chemical attack, providing • Impact extruded aluminum – unless otherwise specified. Crimp high reliability and trouble-free service hard coat anodized contacts are available in all sizes and • Indoors or outdoors in non-hazardous configurations. Pressure contacts, due • Diallyl phthalate – natural (blue) areas of petroleum refineries, chemical to increased terminal area, are available • Fiberglass-reinforced polyester and petrochemical plants, manufacturing only in certain assemblies as shown in material – natural (red) plants, military installations and similar the listings. • Silicone – natural (grey) locations • For cable strain relief and watertight • Copper – silver plated • On machine tools and similar equipment seal, plugs and cord connector receptacles are provided with gland nut Options: and tapered neoprene bushing. Features: • Alternate polarities – ungrounded • All ARK-trol connectors have the same connectors. Standard polarity is Positive Polarization: properties, characteristics and position "N" shown below. Alternate environmental capabilities outlined under • Polarization of ARK-trol connectors is positions "V", "W", "X" or "Y" can be "Compliances" such that plugs and receptacles cannot furnished. To order, substitute for the be mated incorrectly. letter "N" in the listed Cat. No., the Construction: • Insert assemblies must be correctly letter for the desired polarization. aligned and will fit plug and receptacle • All ARK-trol plug, receptacle and cord Example: RPC217-127–SO1N-ARE23 with shells in one position only, because of a connector shell parts are of high-strength polarity "X" becomes RCP217-127–SO1X- raised key on the inner wall of the shells. impact extruded aluminum, hard coated ARE23. • Seven keys on the inner wall of the with a high density anodize finish. The receptacle and seven mating keyways resultant assemblies are lightweight, on the outer diameter of the plug shell extremely strong, free from surface are spaced so that the plug and defects and flaws, and with superior receptacle can be mated in one position resistance to abrasion, corrosion and only. One key and one keyway are larger chemical attack. than the other six as a guide to rapid • "Tri-Disc" insert assemblies consist of connection, easily performed under two rigid insulators with a silicone rubber adverse field conditions – even in total wafer between to provide a cushioning darkness. action against mechanical damage and to effect a positive seal against Interchangeability: penetration by water, moisture, dust, gas and other undesirable matter. Assembly • Shell components and insert assemblies of the inserts compresses the silicone in each diameter are interchangeable. wafer to seal against the inner wall of the • Alternate polarities – grounded Both male and female basic shells will plug or receptacle shell, and around connectors. Standard polarity is position accept either pin or socket inserts. This each individual contact. "A" shown below. Alternate positions feature permits the use of both plug and "B", "C", "D" or "E" can be furnished. • ARK-trol insulating material is of high receptacle in either an energized or de- To order, substitute for the letter "A" in dielectric and mechanical strength with energized condition. the listed Cat. No., the letter for the low moisture absorption and excellent desired polarization. resistance to arc tracking. Socket Grounding: contacts are each enclosed in a separate Example: RPC217-127–SO2A-ARE23 with • Grounded connectors have pin and chamber in the silo insulator. Arcs polarity "D" becomes RPC217-127–SO2D- socket contacts with integral grounding formed while making or breaking a circuit ARE23. straps which press against the inner are quickly snuffed out in the chambers. wall of plug, receptacle and cord • Contacts are removable and, for ease of connector shells, effectively bonding the installation, are snapped into the insert shells to the grounding contacts. assemblies after wire termination. • Grounding socket contacts are longer Termination methods employed are than current carrying contacts to make solder, crimp and pressure. Solder well first and break last, assuring a positive contacts are standard and are furnished ground before circuits are energized unless otherwise specified. Crimp and after circuits are de-energized. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2012 Cooper Crouse-Hinds 1393 1394-1395.qxp 6/13/2011 12:12 PM Page 1394 ® Raintight 8P ARK-trol Electrical Connectors RPC Circuit Breaking Power Connectors RPE Control Circuit and Power Connectors RPC Options (continued): Circuit RPE Connectors • Crimp type contacts – available on all Breaking Non-Interrupting assemblies with solder well contacts. To Contact Connectors Ampere Rating order, add letter "T" to Cat. No., Size NEC immediately following polarity letter. AWG Rating MS(AN) NEC Examples: RPC217-127–S01N-ARE23 and #16 22 16 RPC217-127–S02A-ARE23 except with #12 20A 41 30 crimp contacts would be ordered as #10 30A 57 40 RPC217-127–S01NT-ARE23 and RPC217- #4 60A 135 90 127–S02AT-ARE23 respectively. 1 / 0 100A 250 160 • Alternate cable strain relief methods for 4 / 0 200A 335 225 plugs and connectors: Certifications and Compliances: Stainless steel wire mesh cord grip. To order, add letter "K" to first section of Properties Characteristics Cat. No. Industrial use excludes dust, lint, fibers and flying, oil seepage and coolant seepage – Example: RPC117-150–P01N with wire meets J.I.C. Standard mesh grip would be ordered as Driptight excludes falling moisture or dirt – materials unaffected by condensation RPCK117-150–P01N. Weather resistant performs normally in outdoor areas (weatherproof) Watertight excludes water by hose spray or stream Dust-tight excludes dust, but performs normally if dust is accidentally enclosed Adapter for use with liquid tight/rigid during disconnect conduit. To order, add letters "LT" to Chemical high resistant to alkalis, strong caustics, acids, petroleum base and first section of catalog number. resistance organic solvents Example: RPC117-150–P01N with Pressure 300 psi external – 200 psi internal liquid tight/conduit adapter would be ordered as RPCLT117-150–P01N. Compliance with Military Specifications Electrical Rating Ranges: Environment Performance Data • Voltage – 250, 480 and 600VAC Corrosion salt spray 300 days. MIL-STD-810E resistance • Frequency – 50* to 400 hertz • See listings for specific ratings Temperature –80°F to 275°F, meeting requirements of MIL-STD-810E Air leakage exceeds Class E specification MIL-STD-810E Ampere Ratings: Dust resistance exceeds requirements of MIL-STD-810E • Ratings given in the table at right are applicable to RPC circuit breaking Shock resistance 50G exceeds MIL-STD-810E power connectors and RPE control Vibration exceeds 20G, method II, MIL-STD-810E connectors, as indicated. Humidity & exceeds Class E specification MIL-STD-810E • RPC connectors are capable of making moisture or breaking circuits at the full rated load indicated in the table on the listing ANSI/UL Standard 498 pages. • Contact assemblies of RPE connectors *For use on system less than 60 hertz the receptacles, plugs and connectors are for have the current carrying capabilities disconnect use only. shown in the table, as defined by applicable military specifications (MS) and NEC requirements, for circuits not made or broken under load. It should be noted that these non-interrupting ampere ratings exceed the NEC rating of the corresponding wire size. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1394 8P 8P 1394-1395.qxp 6/13/2011 12:12 PM Page 1395 ® ARK-trol Electrical Connectors 8P Catalog Numbering System Connector Series: Component Accessories: Contact Termination: RPC – circuit breaking This code indicates the combination of Blank = Solder well RPE – for disconnect use only shell parts to fit your application; e.g., 014 (standard unless noted) RPX – hazardous (gasoline or equivalent = square flanged receptacle with insert R = Pressure (See complete ordering hazards, see Section 9P) retaining nut and dust cap; 150 = plug information that follows for availability) handle body, bushing, and clamping nut T = Crimp (available in all configurations) Additional Cable Strain for cable with a diameter of .250 to .625. Plugged Contact Relief (Optional): Contact Type: K = Wire mesh cord grip Openings (Optional): LT = Liquidtight/conduit connection P = Pin (male) This option allows greater flexibility, S = Socket (female) allowing for unique wiring requirements. Shell Parts Designation: The number following the slash indicates Contact Configuration: 0 = No shell part required the total number of contacts that will be 1= Plug shell supplied (including ground contact, if This assigned code indicates the actual 2 = Receptacle applicable); all other openings in the insert configuration of the contacts (pin and 3 = Cord connector assembly will be plugged. socket) in the insert assembly for a 4 = Connector handle body only particular shell size. This is based upon 5 = Plug shell (long) electrical ratings (amperage and voltage) Back Boxes (Optional): 6 = Receptacle (long) and the number of contacts required. It See page 1407 for back box information. 7 = Cord connector (long) does not indicate the number of contacts in the configuration. Shell Size: Polarity Designation: Inside Diameter measured in X/16" (017, 17 021, 033, 041, i.e., 017 shell size = /16") N = Standard position – ungrounded V, W, X or Y = Alternate positions – (ungrounded) A = Standard position – grounded B, C, D or E = Alternate positions – (grounded) © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1395 1396-1397.qxp 6/13/2011 12:12 PM Page 1396 ® Raintight 8P ARK-trol Electrical Connectors RPC Circuit Breaking Power Connectors With Solder Well Terminals† Square Flanged Receptacle, Dust Cap and Back Box Circuit Volts Contact Shell Hub Cat. # (For Surface Motor Plug with Description (VAC) Size Size Size (In.) Mounting)‡* Dust Cap Cat. # 20 Amps 3 Grounded 4w, 5p 480 #12 017 /4 RPC217 014 S09A ARE23 RPC117 157 P09A 1 RPC217 014 S09A ARE33 3 Ungrounded 5w, 5p 480 #12 017 /4 RPC217 014 S08N ARE23 RPC117 157 P08N 1 RPC217 014 S08N ARE33 30 Amps 3 Grounded 2w, 3p 480 #10 017 /4 RPC217 014 S02A ARE23 RPC117 157 P02A 1 RPC217 014 S02A ARE33 3 3w, 4p 480 #10 017 /4 RPC217 014 S04A ARE23 RPC117 157 P04A 1 RPC217 014 S04A ARE33 3 4w, 5p 480 #10 021 /4 RPC221 014 S17A ARE23 RPC121 157 P17A 1 RPC221 014 S17A ARE33 3 Ungrounded 3w, 3p 480 #10 017 /4 RPC217 014 S01N ARE23 RPC117 157 P01N 1 RPC217 014 S01N ARE33 3 4w, 4p 480 #10 017 /4 RPC217 014 S03N ARE23 RPC117 157 P03N 1 RPC217 014 S03N ARE33 3 5w, 5p 480 #10 021 /4 RPC221 014 S16N ARE23 RPC121 157 P16N 1 RPC221 014 S16N ARE33 60 Amps 1 Grounded 3w, 4p 600 #4 033 1 /4 RPC233 014 S08A ARE46 RPC133 157 P08A 1 1 /2 RPC233 014 S08A ARE56 1 4w, 5p 480 #4 033 1 /4 RPC233 014 S09A ARE46 RPC133 157 P09A 1 1 /2 RPC233 014 S09A ARE56 1 Ungrounded 4w, 4p 600 #4 033 1 /4 RPC233 014 S05N ARE46 RPC133 157 P05N 1 1 /2 RPC233 014 S05N ARE56 1 5w, 5p 480 #4 033 1 /4 RPC233 014 S06N ARE46 RPC133 157 P06N 1 1 /2 RPC233 014 S06N ARE56 © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1396 8P 8P ® Raintight ARK-trol Electrical Connectors 8P RPC Circuit Breaking Power Connectors With Solder Well Terminals† Cord Cable Connector Plug †Solder well terminals provided as standard. Crimp Diameter Range Cat. #§ Cat. #§ contacts are optionally available, add suffix T to catalog RPC317 160 S09A RPC117 150 P09A number. Example: RPC217-014-S09AT-ARE23. .250 to .625 ‡For square flanged receptacle without dust cap, .625 to .875 RPC317 161 S09A RPC117 151 P09A change the middle three digits of the catalog number from 014 to 127. Example: RPC217-127-S09A-ARE23. .250 to .625 RPC317 160 S08N RPC117 150 P08N *For square flanged receptacle with dust cap for panel RPC317 161 S08N RPC117 151 P08N .625 to .875 mounting, delete the last digits of the catalog number specifying the backbox. Example: RPC217-014-S09A. .250 to .625 RPC317 160 S02A RPC117 150 P02A §For plugs and cord connectors: .625 to .875 RPC317 161 S02A RPC117 151 P02A Liquidtight/Conduit Adapter – To order with adapter, add letters "LT" to first section of catalog number. Example: RPCLT317-160-S09A. .250 to .625 RPC317 160 S04A RPC117 150 P04A Additional Cable Strain Relief Options – RPC317 161 S04A RPC117 151 P04A .625 to .875 • Stainless steel wire mesh grip – To order, add letter "K" to first section of catalog number. Example: .625 to 1.000 RPC321 161 S17A RPC121 151 P17A RPCK317-160-S09A. 1.000 to 1.187 RPC321 395 S17A RPC121 387 P17A .250 to .625 RPC317 160 S01N RPC117 150 P01N RPC317 161 S01N RPC117 151 P01N .625 to .875 .250 to .625 RPC317 160 S03N RPC117 150 P03N .625 to .875 RPC317 161 S03N RPC117 151 P03N .625 to 1.000 RPC321 161 S16N RPC121 151 P16N RPC321 395 S16N RPC121 387 P16N 1.000 to 1.187 .875 to 1.375 RPC333 163 S08A RPC133 153 P08A 1.375 to 1.625 RPC333 396 S08A RPC133 388 P08A 1.625 to 1.875 RPC333 397 S08A RPC133 389 P08A .875 to 1.375 RPC333 163 S09A RPC133 153 P09A RPC333 396 S09A RPC133 388 P09A 1.375 to 1.625 1.625 to 1.875 RPC333 397 S09A RPC133 389 P09A .875 to 1.375 RPC333 163 S05N RPC133 153 P05N RPC333 396 S05N RPC133 388 P05N 1.375 to 1.625 RPC333 397 S05N RPC133 389 P05N 1.625 to 1.875 .875 to 1.375 RPC333 163 S06N RPC133 153 P06N 1.375 to 1.625 RPC333 396 S06N RPC133 388 P06N RPC333 397 S06N RPC133 389 P06N 1.625 to 1.875 Note: RPC with pressure terminals are also available, see pages 0000 and 0000. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2012 Cooper Crouse-Hinds 1397 1398-1399.qxp 6/13/2011 12:13 PM Page 1398 ® Raintight 8P ARK-trol Electrical Connectors RPC Circuit Breaking Power Connectors With Solder Well Terminals† Square Flanged Receptacle, Dust Cap and Back Box Circuit Volts Contact Shell Hub Cat. # (For Surface Motor Plug Description (VAC) Size Size Size (In.) Mounting)‡* Cat. # 100 Amps 1 1 Grounded 4w, 5p 600 /0 041 1 /2 RPC641 014 S04A AJ57 RPC541 157 P04A 2 RPC641 014 S04A AJ67 1 1 Ungrounded 5w, 5p 600 /0 041 1 /2 RPC641 014 S02N AJ57 RPC541 157 P02N 2 RPC641 014 S02N AJ67 200 Amps 4 Grounded 3w, 4p 480 /0 041 2 RPC641 014 S10A AJ68 RPC541 157 P10A 1 2 /2 RPC641 014 S10A AJ78 © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1398 8P 8P 1398-1399.qxp 6/13/2011 12:13 PM Page 1399 ® Raintight ARK-trol Electrical Connectors 8P RPC Circuit Breaking Power Connectors With Solder Well Terminals† †Solder well terminals provided as standard. Crimp contacts are optionally available, add suffix T to catalog number. Example: RPC217-014-S09AT-ARE23. ‡For square flanged receptacle without dust cap, change the middle three digits of the catalog number from 014 to 127. Example: RPC217-127-S09A-ARE23. *For square flanged receptacle with dust cap for panel mounting, delete the last digits of the catalog number specifying the backbox. Example: RPC217-014-S09A. §For plugs and cord connectors: Liquidtight/Conduit Adapter – To order with adapter, add letters "LT" to first section of catalog number. Example: RPCLT317-160-S09A. Additional Cable Strain Relief Options – • Stainless steel wire mesh grip – To order, add letter "K" to first section of catalog number. Example: RPCK317-160-S09A. Cord Cable Connector Plug Diameter Range Cat. #§ Cat. #§ RPC741 164 S04A RPC541 154 P04A 1.375 to 1.875 1.875 to 2.062 RPC741 398 S04A RPC541 390 P04A 2.062 to 2.250 RPC741 399 S04A RPC541 391 P04A 1.375 to 1.875 RPC741 164 S02N RPC541 154 P02N RPC741 398 S02N RPC541 390 P02N 1.875 to 2.062 2.062 to 2.250 RPC741 399 S02N RPC541 391 P02N 1.375 to 1.875 RPC741 164 S10A RPC541 154 P10A 1.875 to 2.062 RPC741 398 S10A RPC541 390 P10A RPC741 399 S10A RPC541 391 P10A 2.062 to 2.250 Note: RPC with pressure terminals are also available, see pages 1400–1403. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1399 1400-1401.qxp 5/30/2011 2:21 PM Page 1400 ® Raintight 8P ARK-trol Electrical Connectors RPC Circuit Breaking Power Connectors With Pressure Terminals Square Flanged Receptacle, Dust Cap and Back Box Circuit Volts Contact Shell Hub Cat. # (For Surface Motor Plug Description (VAC) Size Size Size (In.) Mounting)■‡ Cat. # 30 Amps 3 Grounded 2w, 3p 600 #10 021 /4 RPC221 014 S04AR ARE23 RPC121 157 P04AR 1 RPC221 014 S04AR ARE33 3 Ungrounded 3w, 3p 600 #10 021 /4 RPC221 014 S02NR ARE23 RPC121 157 P02NR 1 RPC221 014 S02NR ARE33 60 Amps 1 Grounded 3w, 4p 600 #4 033 1 /4 RPC233 014 S08AR ARE46 RPC133 157 P08AR 1 1 /2 RPC233 014 S08AR ARE56 1 4w, 5p 480 #4 033 1 /4 RPC233 014 S09AR ARE46 RPC133 157 P09AR 1 1 /2 RPC233 014 S09AR ARE56 1 Ungrounded 4w, 4p 600 #4 033 1 /4 RPC233 014 S05NR ARE46 RPC133 157 P05NR 1 1 /2 RPC233 014 S05NR ARE56 1 5w, 5p 480 #4 033 1 /4 RPC233 014 S06NR ARE46 RPC133 157 P06NR 1 1 /2 RPC233 014 S06NR ARE56 For alternate polarizations, see page 1393, "Options" section. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1400 8P 8P 1400-1401.qxp 5/30/2011 2:21 PM Page 1401 ® Raintight ARK-trol Electrical Connectors 8P RPC Circuit Breaking Power Connectors With Pressure Terminals Cord Cable Connector Plug Diameter Range Cat. #* Cat. #* ■ For square flanged receptacle without dust cap, RPC321 160 S04AR RPC121 150 P04AR .250 to .625 change the middle three digits of the catalog number .625 to 1.000 RPC321 161 S04AR RPC121 151 P04AR from 014 to 127. Example: RPC221-127-S04AR-ARE23. ‡For square flanged receptacle with dust cap for panel .250 to .625 RPC321 160 S02NR RPC121 150 P02NR mounting, delete the last digits of the catalog number specifying the backbox. Example: RPC221-014-S04AR. .625 to 1.000 RPC321 161 S02NR RPC121 151 P02NR *For plugs and cord connectors: .875 to 1.375 RPC333 163 S08AR RPC133 153 P08AR Liquidtight/Conduit Adapter – To order with adapter, add letters "LT" to first section of 1.375 to 1.625 RPC333 396 S08AR RPC133 388 P08AR catalog number. Example: RPCLT321-160-S04AR. 1.625 to 1.875 RPC333 397 S08AR RPC133 389 P08AR Additional Cable Strain Relief Options – • Stainless steel wire mesh grip – To order, add letter .875 to 1.375 RPC333 163 S09AR RPC133 153 P09AR "K" to first section of catalog number. Example: RPCK321-160-S04AR. RPC333 396 S09AR RPC133 388 P09AR 1.375 to 1.625 1.625 to 1.875 RPC333 397 S09AR RPC133 389 P09AR .875 to 1.375 RPC333 163 S05NR RPC133 153 P05NR 1.375 to 1.625 RPC333 396 S05NR RPC133 388 P05NR RPC333 397 S05NR RPC133 389 P05NR 1.625 to 1.875 .875 to 1.375 RPC333 163 S06NR RPC133 153 P06NR 1.375 to 1.625 RPC333 396 S06NR RPC133 388 P06NR 1.625 to 1.875 RPC333 397 S06NR RPC133 389 P06NR © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1401 1402-1403.qxp 5/30/2011 2:22 PM Page 1402 ® Raintight 8P ARK-trol Electrical Connectors RPC Circuit Breaking Power Connectors With Pressure Terminals Square Flanged Receptacle, Dust Cap and Back Box Circuit Volts Contact Shell Hub Cat. # (For Surface Motor Plug Description (VAC) Size Size Size (In.) Mounting)■‡ Cat. # 100 Amps 1 1 Grounded 4w, 5p 600 /0 041 1 /2 RPC641 014 S04AR AJ57 RPC541 157 P04AR 2 RPC641 014 S04AR AJ67 1 1 Ungrounded 5w, 5p 600 /0 041 1 /2 RPC641 014 S02NR AJ57 RPC541 157 P02NR 2 RPC641 014 S02NR AJ67 For alternate polarizations, see page 1393, "Options" section. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1402 8P 8P 1402-1403.qxp 5/30/2011 2:22 PM Page 1403 ® Raintight ARK-trol Electrical Connectors 8P RPC Circuit Breaking Power Connectors With Pressure Terminals Cord ■ For square flanged receptacle without dust cap, change Cable Connector Plug the middle three digits of the catalog number from 014 to 127. Example: RPC221-127-S04AR-ARE23. Diameter Range Cat. #* Cat. #* ‡For square flanged receptacle with dust cap for panel RPC741 164 S04AR RPC541 154 P04AR mounting, delete the last digits of the catalog number 1.375 to 1.875 specifying the backbox. Example: RPC221-014-S04AR. 1.875 to 2.062 RPC741 398 S04AR RPC541 390 P04AR *For plugs and cord connectors: 2.062 to 2.250 RPC741 399 S04AR RPC541 391 P04AR Liquidtight/Conduit Adapter – To order with adapter, add letters "LT" to first section of 1.375 to 1.875 RPC741 164 S02NR RPC541 154 P02NR catalog number. Example: RPCLT321-160-S04AR. Additional Cable Strain Relief Options – RPC741 398 S02NR RPC541 390 P02NR 1.875 to 2.062 • Stainless steel wire mesh grip – To order, add letter "K" to 2.062 to 2.250 RPC741 399 S02NR RPC541 391 P02NR first section of catalog number. Example: RPCK321-160- S04AR. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1403 1404-1405.qxp 5/30/2011 2:23 PM Page 1404 ® Raintight 8P ARK-trol Electrical Connectors RPE Control Circuit and Power Connectors With Solder Well Terminals† Square Flanged Receptacle, Dust Cap and Back Box Circuit Contact Volts Shell Hub Cat. # (For Surface Motor Plug Description Size Amps (VAC) Size Size (In.) Mounting)‡* Cat. # Control 3 6w, 7p #12 20 480 017 /4 RPE217 014 S06A ARE23 RPE117 157 P06A 1 RPE217 014 S06A ARE33 3 7w, 7p #12 20 480 017 /4 RPE217 014 S05N ARE23 RPE117 157 P05N 1 RPE217 014 S05N ARE33 3 12w, 12p #16 16 250 017 /4 RPE217 014 S07N ARE23 RPE117 157 P07N 1 RPE217 014 S07N ARE33 3 18w, 19p #12 20 250 021 /4 RPE221 014 S08A ARE23 RPE121 157 P08A 1 RPE221 014 S08A ARE33 3 19w, 19p #12 20 250 021 /4 RPE221 014 S09N ARE23 RPE121 157 P09N 1 RPE221 014 S09N ARE33 1 38w, 39p #12 20 250 033 1 /4 RPE233 014 S19A ARE46 RPE133 157 P19A 1 1 /2 RPE233 014 S19A ARE56 1 39w, 39p #12 20 250 033 1 /4 RPE233 014 S17N ARE46 RPE133 157 P17N 1 1 /2 RPE233 014 S17N ARE56 © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1404 8P 8P 1404-1405.qxp 5/30/2011 2:23 PM Page 1405 ® Raintight ARK-trol Electrical Connectors 8P RPE Control Circuit and Power Connectors With Solder Well Terminals Cord Cable Connector Plug Diameter Range Cat. #§ Cat. #§ †Solder well terminals provided as standard. Crimp contacts are optionally available, add suffix T to catalog .250 to .625 RPE317 160 S06A RPE117 150 P06A number. Example: RPE633-014-S24NT-AJ57. .625 to .875 RPE317 161 S06A RPE117 151 P06A ‡For square flanged receptacle without dust cap, change the middle three digits of the catalog number .250 to .625 RPE317 160 S05N RPE117 150 P05N from 014 to 127. Example: RPE633-127-S24N-AJ57. .625 to .875 RPE317 161 S05N RPE117 151 P05N *For square flanged receptacle with dust cap for panel mounting, delete the last three digits of the catalog number specifying the backbox. Example: RPE633-014- .250 to .625 RPE317 160 S07N RPE117 150 P07N S24N. .625 to .875 RPE317 161 S07N RPE117 151 P07N §For plugs and cord connectors: Liquidtight/Conduit Adapter – .625 to 1.000 RPE321 161 S08A RPE121 151 P08A To order with adapter, add letters "LT" to the first section of the catalog number. Example: RPELT733- 1.000 to 1.187 RPE321 395 S08A RPE121 387 P08A 396-S24N. Additional Cable Strain Relief Options – .625 to 1.000 RPE321 161 S09N RPE121 151 P09N • Stainless steel wire mesh grip – To order, add letter 1.000 to 1.187 RPE321 395 S09N RPE121 387 P09N "K" to first section of the catalog number. Example: RPEK733-396-S24N. .875 to 1.375 RPE333 163 S19A RPE133 153 P19A 1.375 to 1.625 RPE333 396 S19A RPE133 388 P19A .875 to 1.375 RPE333 163 S17N RPE133 153 P17N 1.375 to 1.625 RPE333 396 S17N RPE133 388 P17N © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1405 1406-1407.qxp 5/30/2011 2:26 PM Page 1406 8P RPC and RPE Connectors Accessories Dust Caps: For #16 Through #10 For Receptacles Contacts: For RPC or RPE Series The RPE017-440 crimping tool has been designed to crimp a wide range of solid and stranded type conductors. The crimping head is adjusted and sealed at the factory. The tool automatically crimps and gauges all size contacts without readjustment. Cat. # Description RPE017 009 RPE021 009 Dust Cap w/Eyelet for RPE033 009 Receptacle RPE041 009 Contact Removal Tools: The contact removal tool extracts the contact from the insert assembly without complete disassembly of the connector. Cat # Description RPE017 402T for use with #16 contacts. RPE017 403T for use with #12 contacts. RPE017 404T for use with #10 contacts. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1406 8P 8P 1406-1407.qxp 5/30/2011 2:26 PM Page 1407 Back Boxes and Adapters 8P For Mounting RPC and RPE Square Flanged Receptacles 45° Angle adapter Flat adapter Adapters Back Boxes Shell Sizes of Square Flanged Receptacles FS and FSC Hub FS† FSC† 45° Angle Flat Size in. Cat. # Cat. # 017 Cat. # 021 Cat. # 017 Cat. # 021 Cat. # 1 /2 FS1 SA FSC1 SA 3 /4 FS2 SA FSC2 SA RPE017 156 RPE021 156 RPE017 141 RPE021 142 ] 1 FS3 SA FSC3 SA FS Back Box Shell Sizes of Square Flanged Receptacles ARE‡ Flat Hub Size in. Cat. # Rating 017 Cat. # 021 Cat. # 033 Cat. # 041 Cat. # 1 /2 ARE13 3 /4 ARE23 30A RPE017 143 RPE021 144 ] 1 ARE33 1 ARE36 RPE033 145 RPE041 146 1 1 /4 ARE46 60A ] 1 1 /2 ARE56 ARE Back Box Shell Sizes of Square Flanged Receptacles AJ‡ Flat Hub Size in. Cat. # Rating 033 Cat. # 041 Cat. # 1 AJ37 1 1 /4 AJ47 60A and 1 ] RPE033 145 RPE041 146 1 /2 AJ57 100A 2 AJ67 1 1 /2 AJ58 RPE041 147 2 AJ68 200A ] 1 2 /2 AJ78 AJ Black Box † Any of the FS or FD single gang, two gang tandem or multiple gang boxes with individual cover openings may be used with these adapters. For listings, dimensions and other details refer to Section 3F. ‡ Other AR and AJ back boxes may be used with these adapters. For listings, dimensions and other details refer to Section 1P. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1407 1408-1409.qxp 5/30/2011 2:26 PM Page 1408 ® 8P ARK-trol Electrical Connectors RPC Circuit Breaking Power Connectors RPE Control Circuit and Power Connectors Dimensions (Inches) Square Flanged Receptacle Shell Type and Size b c d e f g 217 1.375 1.317 2.165 1.562 .190 1.750 221 1.750 1.692 2.165 2.000 .190 2.250 233 2.375 2.317 2.165 2.625 .214 2.875 241 2.813 2.817 2.165 3.187 .250 3.438 633 2.375 2.317 2.915 2.625 .214 2.875 641 2.813 2.817 2.915 3.187 .250 3.438 a Contact for AWG Wire 0.1875 #16, #12, #10 0.250 #4 1 0.375 /0 4 0.500 /0 Square Flanged Receptacle with Dust Cap Shell Type and Size b c d e f g 217 1.375 1.317 2.812 1.927 .190 1.750 221 1.750 1.692 2.812 2.468 .190 2.250 233 2.375 2.317 2.812 3.145 .214 2.875 241 2.813 2.817 2.812 3.754 .250 3.438 633 2.375 2.317 3.552 3.145 .214 2.875 641 2.813 2.817 3.552 3.754 .250 3.438 Dimension a – same as above Plug Shell Type and Size a† b† c d 117 5.033 4.133 1.270 1.921 121 5.090 4.190 1.675 2.468 133 6.093 5.193 2.295 3.140 141 6.653 5.753 2.800 3.750 533 6.843 5.193 2.295 3.140 541 7.403 5.753 2.800 3.750 † These dimensions are approximate and vary with cable size. © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1408 8P 8P 1408-1409.qxp 5/30/2011 2:26 PM Page 1409 ® ARK-trol Electrical Connectors 8P RPC Circuit Breaking Power Connectors RPE Control Circuit and Power Connectors Dimensions (Inches) Cord Connector Receptacle Shell Type and Size a† b† c d 317 5.033 4.116 1.562 1.812 321 5.090 4.173 1.885 2.300 333 6.093 5.176 2.625 3.140 341 6.653 5.736 3.187 3.730 733 6.843 5.176 2.625 3.140 741 7.403 5.736 3.187 3.730 † These dimensions are approximate and vary with cable size. Square flanged receptacle Panel Mounting Methods Back Mounting Front Mounting Shell Size a d e b d e 19 3 3 17 3 3 017 1 /32 1 /8 /16 1 /32 1 /8 /16 1 3 3 31 3 3 021 2 /32 1 /4 /16 1 /32 1 /4 /16 21 3 7 21 3 7 033 2 /32 2 /8 /32 2 /32 2 /8 /32 7 13 1 5 13 1 041 3 /32 2 /16 /4 3 /32 2 /16 /4 AJ Back Boxes Form Size a b c d e f g 3 1 1 7 7 7 7 C and D /4, 1, 1 /4, 1 /2 5 /8 87 /16 4 /8 75 /8 15° 7 7 7 C and D 25 /8 884 /8 75 /8 15° 1 1 3 7 3 1 E 1 /2, 2, 2 /2 810 /4 9 /8 6 /4 9 /2 8 45° ARE Back Boxes Form Size a b c d e f h dia. 1 3 5 3 1 27 11 B /2 3 /8 3 /8 2 /4 4 /4 1 /32 /32 3 3 5 3 1 27 11 B /4 3 /8 3 /8 2 /4 4 /4 1 /32 /32 3 5 3 1 31 11 B 13 /8 3 /8 2 /4 4 /4 1 /32 /32 1 11 11 1 5 15 3 C 14 /4 4 /16 4 /16 5 /4 1 /8 /16 /8 1 1 11 11 1 5 3 C 1 /4 4 /4 4 /16 4 /16 5 /4 1 /8 1 /8 1 1 11 11 1 5 1 3 C 1 /2 4 /4 4 /16 4 /16 5 /4 1 /8 1 /16 /8 FS/FSC Boxes Series Hub Size a b c d 1 7 5 7 11 /2 /8 /8 1 /8 1 /16 3 7 3 7 11 FS /4 /8 /4 1 /8 1 /16 7 7 11 11 /8 1 /8 1 /16 © www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2011 Cooper Crouse-Hinds 1409

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the RPCK541 154 P04A have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

R-PR REFRACTORS-HID LTG ENCL &

R-PR REFRACTORS-HID LTG ENCL &

R-PR REFRACTORS-HID LTG ENCL &

30 DEG ANGLE A23 KRYDON REFLECTOR

RA63 RA64-LIGHTING HAZ LOC

CROUSE-HINDS ECM / RA64 150W ANGLE REFL A*