AC Permanent Magnet Motors Models 105, 107, 113 The Cramer line of AC Permanent Magnet Motors offers application solutions requiring fast starts, fast stops where coasting of load is undesirable CRAMER ® MOTORS and low wattage operating power consumption. Applications Include: • Valve Drive Assemblies • Automatic Teller Machines • POP Displays • Timing Control Systems Features: • Maintains synchronous speeds • High torque rating • Fast starts and stops • Low power consumption Similar Products By Cramer: • Clockwise and Counter Clockwise rotation available • Lifetime lubrication • Pear-shape and round gear case available Specifications: Rating Data (Ounce Inches @ 1 RPM) Model 105 107 113 DC Permanent Motors Model 800 Starting Torque @ 1 RPM 300 oz. in. 30 oz. in. 60 oz. in. Running Torque @ 1 RPM 300 oz. in. 60 oz. in. 60 oz. in. Standard Voltages 24/120/240 VAC 24/120/240 VAC 24/120/240 VAC Standard Frequency 60 Hz. 60 Hz. 60 Hz. Power Input (Nominal) 2.7 Watts 1.5 Watts 2.7 Watts Hysteresis Motors Model 6100 Direction of Rotation CW & CCW CW & CCW CW & CCW Operating Temperature -4ºF to 131ºF -4ºF to 131ºF -4ºF to 131ºF Range -20ºC to 55ºC -20ºC to 55ºC -20ºC to 55ºC Clutches * One- or Two-way One- or Two-way One- or Two-way Gear Train Rating Standard & Heavy Duty Standard & Heavy Duty Standard & Heavy Duty Static** 90-160 oz. in. 90-160 oz. in. 90-160 oz. in. Dynamic*** 30-150 oz. in. 30-150 oz. in. 30-150 oz in. 105 Nutmeg Road South Standard Mounting 2 hole 2 hole 2 hole South Windsor, CT 06074 USA P: 860.291.8402 *Slip clutch devices are built into a gear train to permit manual rotation of the output shaft. One-way clutch permits manual advances in the direction of powered shaft rotation only. Two-way clutch permits manual turning in either direction, but is not designed for continuous slippage F: 860.610.0897 and should not be relied upon to protect a gear train against excessive torque loads. **Static torque rating is the maximum static load that can be cramer-motors.com sustained without substantial risk of damage to the gear train. ***Dynamic torque rating is the maximum load the gear train can drive continuously. AC Per manent Magnet Motors Round-Shaped Gear Case: Pear-Shaped Gear Case: Dimensions: INCH [MM] Shaft Selection Data: When selecting the required shaft for your application, please indicate the type of shaft needed-either round, flatted or knurled, including other key measurements below: Shaft diameter (A) Shaft length (B) Shaft width at flat (C) and length (D) Knurl length (E) and knurl set back (F) Bearing O.D. (G) and Bearing height (H) Motor Selection: When specifying a motor for meeting your application, Cramer Company requires information such as torque, speed requirements, voltage, shaft dimensions and shape, direction of rotation and other key performance values. To assist you in specifying the requirements above, please visit cramer-motors.com or call our sales staff and request a specification worksheet for completing the information. Warranty: Cramer warrants its products against defective material or workmanship for a period of one year from the date of shipment from factory, providing product has been used in accordance with instructions and specified ratings. Consult factory for further details concerning our warranty policy. 105 Nutmeg Road South South Windsor, CT 06074 USA P: 860.291.8402 F: 860.610.0897 cramer-motors.com