COSEL P1500E-24
Specifications
Frequency[Hz]
47 - 440
Hold up Time[ms]
10typ(ACIN 85/170V, Io-100%) 20typ(ACIN 100/200V, Io
INPUT-FG
AC2,000V 1minute, Cutoff current-10mA, DC500V 50MWmin(At Room Temperature)
Input-Output-RC
AC3,000V 1minute, Cutoff current-10mA, DC500V 50MWmin(At Room Temperature)
Output Voltage Adjustment Range[V]
-20 to +10%
Output-RC
AC100V 1minute, Cutoff current-100mA, DC100V 50MWmin(At Room Temperature)
Output-RC-FG
AC500V 1minute, Cutoff current-100mA, DC500V 50MWmin(At Room Temperature)
Overcurrent protection
Works over 105% of rating
Overvoltage Protection
Works at 115 - 140% of rating
Voltage[V]
AC85 - 132 / 170 - 264 1f(User-selectable) or DC220 - 370
Features
- Built-In ±10% Output Voltage Adjusting Potentiometer
- Conductive Noise — FCC-B, FCC-A Depending on Model
- Fully Regulated, Fully Isolated Input/Output
- High Quality — Field Failure Rate Less than 0.012%
- Inrush Current, Overcurrent and Overvoltage Protection Circuitry
- N Denotes Covered Unit
- Remote Sensing P100 and P150 Models
- UL, CSA Safety Approvals
- Universal and User Selectable Input AC 85~264, AC 85~132/170~2
Datasheet
Extracted Text
Ordering information Unit type P 1500 E -5 -O P1500E P 12345 1Series name R 2Output wattage 3UL recognized,TuV approved, CSA certified:E 4Output voltage 5Optional C :with Coating RoHS : Please consult us for details MODEL P1500E-5 P1500E-12 P1500E-15 P1500E-18 P1500E-24 MAX OUTPUT WATTAGE[W] 1500 1500 1500 1512 1560 DC OUTPUT 5V 300A 12V 125A 15V 100A 18V 84A 24V 65A SPECIFICATIONS MODEL P1500E-5 P1500E-12 P1500E-15 P1500E-18 P1500E-24 ( ) VOLTAGE[V] AC85 - 132 / 170 - 264 1 User-selectable or DC220 - 370 f 1 ( ) ACIN 100V* 29typ Io=100% CURRENT[A] *1 ( ) ACIN 200V 18typ Io=100% INPUT FREQUENCY[Hz] 47 - 440 EFFICIENCY[%] 78typ 81typ 81typ 81typ 83typ ( )( ) ACIN 100V 25/150typ Io=100% Primary inrush current /Secondary inrush current INRUSH CURRENT[A] ( )( ) ACIN 200V 50/150typ Io=100% Primary inrush current /Secondary inrush current VOLTAGE[V] 5 12151824 CURRENT[A] 300 125 100 84 65 MAX OUTPUT WATTAGE[W] 1500 1500 1500 1512 1560 LINE REGULATION[mV] 20max 48max 60max 72max 96max LOAD REGULATION[mV] 40max 100max 120max 150max 150max *2 OUTPUT RIPPLE[mVp-p] 80max 120max 120max 120max 120max 2 RIPPLE NOISE[mVp-p] * 120max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] 0to+50 50max 120max 150max 180max 240max C OUTPUT VOLTAGE ADJUSTMENT RANGE[V] -20 to +10% START-UP TIME[ms] 800max (ACIN 85/170V, Io=100%) ( , ) ( , ) HOLD-UP TIME[ms] 10typ ACIN 85/170V Io=100% 20typ ACIN 100/200V Io=100% OVERCURRENT PROTECTION Works over 105% of rating PROTECTION CIRCUIT OVERVOLTAGE PROTECTION Works at 115 - 140% of rating , , , ( ) INPUT-OUTPUT RC AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature - W , , , ( ) INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W ISOLATION OUTPUT RC-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50M min (At Room Temperature) - W , , ( ) OUTPUT-RC AC100V 1minute Cutoff current = 100mA DC100V 50M min At Room Temperature W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +60 30 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75 , 20 - 90%RH (Non condensing), 9,000m (30,000feet) max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 30minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis SAFETY AND AGENCY APPROVALS UL60950-1, EN60950-1, EN50178, CSA C22.2 No.234 Complies with DEN-AN and IEC60950-1 NOISE REGULATIONS CONDUCTED NOISE Complies with FCC-A *1 The input current of the agency approved unit is indicated as 27A (ACIN 100V) or 17A (ACIN 200V). *2 According to 15MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). A-84 P1500E P External view 100/200V max 30 300 Change 24.5 16 max Short 100V Name Plate 25 Open 200V RCG RC AC(N) CB VB AC(L) -S -M Short-piece +M M4 +S Output Terminal(-) Output Terminal(+) FG Hole M4 Voltage Adjust 4-M4 (Bottom) 10 0.5 275± LED 54 max 50 10 4 Mounting Hole 0.5 275± (+)(-)Terminal in detail 4P Terminal in detail for Left side 2–M5 M5 2– º 9 AIR FLOW (Bottom) ¶Weight : 7kg or less 4-M4 (Both sides) 10 15 ¶Tolerance : ±1 Mounting Hole ¶Mounting torque : 1.5N · m(16kgf · cm)max ¶Dimensions in mm. Performance data EXAMPLE • ¡Automatic Current sharing ¡ Output voltage is controlled by a potentiometer in master unit. Turn slave unit's potentiometer clock wise all the way to the end. ¡ Maximun output current can be determined by using the following formula: Total output current = 0.9 †(Rated current per unit)† Number of units paralleled ¡ Five units maximum for the parallel operation. DERA DERATING CUR TING CURVE VE ¡ The shadow indicates the region where different * specifications for ripple noise should be used. A-85 37.5 25 20 16 13 5.5 137 5 20 5 15.25 9.5 8.1 147.5 117.5 28 15 0.5 10 72± 0.5 180± 97 200 Basic Characteristics Data P Basic Characteristics Data Series/Parallel Switching Input Inrush PCB/Pattern operation availability Rated frequency current current Model Circuit method Single Double Series Parallel input fuse protection Material [kHz] [A] operation operation sided sided P15E Flyback converter 45 - 340 0.3 250V 2A Thermistor CEM-1 Yes Yes 1 1 * * P30E Flyback converter 45 - 400 0.6 250V 3A Thermistor CEM-1 Yes Yes*1 *1 P50E Flyback converter 65 - 350 1.2 250V 3A Thermistor CEM-1 Yes Yes 1 1 * * P100E Forward converter 200 2.2 250V 5A Triac CEM-1 Yes Yes 1 * P150E Forward converter 200 3.2 250V 6.3A Triac FR-4 Yes Yes 1 * P300E Forward converter 300 5.5 250V 15A Triac FR-4 Yes Yes Yes P600E Forward converter 210 11 250V 20A Triac FR-4 Yes Yes Yes P1500E Forward converter 150 29 250V 50A SCR FR-4 Yes Yes Yes PT1500U Forward converter 140 6 250V 20A SCR FR-4 Yes Yes Yes *1 Refer to Instruction Manual. * Switching frequency of flyback converter depends on input voltage and load factor. * The value of input current is at ACIN100V and rated load (As for PT1500U, ACIN200V and rated load). A-88
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the P1500E-24 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods