Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com Ordering information High-attenuation type of common mode noise from 150kHz to 1MHz NAC -10 -472 -O NAC series 1 2 3 4 1Model Name 2Rated Current 3Line to ground capacitor code:See table 1.1. table1.1 Line to ground capacitor code Line to ground Leakage Current Code capacitor (Input 125/250V 60Hz) (nominal value) 681 75.5 A/ 150 A max 680pF 102 0.13mA/ 0.25mA max 1000pF 222 0.25mA/ 0.5 mA max 2200pF 332 0.38mA/ 0.75mA max 3300pF 472 0.5 mA/ 1.0 mA max 4700pF *1 When the line to ground capacitor code is different, the attenuation characteristic is different. 4Options D:DIN rail installation type The terminal cover is retracted inside the unit DIN rail installation type is option The dimensions change when the option is set. * Refer to External view. Features of NAC series High-attenuation type of common mode noise from 150kHz to 1MHz - Single Phase 250 VAC - Quick and easy push-down terminal Just connect the wires, push down and tighten the screws with a screwdriver Specifications No. Items NAC-04-472 NAC-06-472 NAC-10-472 NAC-16-472 NAC-20-472 NAC-30-472 1 Rated Voltage[V] AC 1f 250 / DC250 2 Rated Current[A] 4 6 10162030 3 Test Voltage (Terminal-Mounting Plate) 2,500 VAC (Cutoff Current = 20mA), 1minute at room temperature and humidity 4 Isolation Resistance (Terminal-Mounting Plate) 500 VDC 100MW min ute at room temperature and humidity 5 Leakage current 125/250V 60Hz 0.5mA/1.0mA max 6 Voltage drop 1.0V max 7 Safety agency approval temperatures -25 to +85C (Refer to Derating Curve) 8 Operating temperature -40 to +85 (Refer to Derating Curve) C 9 Operating humidity 20 to 95%RH (Non condensing) 10 Storage temperature/humidity -40 to +85C/20 to 95%RH (Non condensing) 2 11 Vibration 10 to 55Hz, 19.6m/s (2G), 3min. Period, 1hour each X, Y and Z axis 2 12 Impact 196.1m/s (20G), 11ms Once each X, Y and Z axis 13 Safety agency approvals UL1283, CSA C22.2 No.8 (C-UL), DIN EN133200 VDE0565 Teil3-1, ENEC (At only AC input) 14 Case size (without projection) /Mass 53X41X92 mm (WXHXD) /300g max (Option : -D refer to external view) Circuit Diagram Derating Curve Case 100 80 1 3 60 CY LOAD LINE 40 CY 20 2 4 Noise 0 Filter -40 -30 -20 40 50 55 60 70 80 90 Ambient Temperature [C] CY : Line to ground capacitor : Mounting Plate I-2 Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com Load Factor [%] Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com NAC,NAM,NAP,NAH series External view This product is shipped in the following condition, because it is equipped with push-down terminals. 1The terminal cover is retracted inside the unit. 2The screws for connecting the terminals are held in the up right position. Standard Type 92 ±0.5 (2.5) 27 82 2-f4.8 77 2-Protection Earth 8 Mounting Hole Input Terminal Output Name Plate Terminal Output Input Terminal Terminal 6-M4 Terminal cover Terminal cover Mounting Plate ¶ Closed the terminal cover ¶ Tolerance : ±1 ¶ Mass : 300g or less ¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 ¶ Case : PBT ¶ Dimensions in mm ¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max DIN rail installation Type (2.5) 27 92 (11) 77 8 2-Protection Earth Input Terminal Output Name Plate Terminal Output Input Terminal Terminal 6-M4 Mounting Plate Terminal cover Terminal cover ¶ Closed the terminal cover ¶ Tolerance : ±1 ¶ Mass : 300g or less ¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 ¶ Case : PBT ¶ Dimensions in mm ¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max DIN rail Note when installing the noise ¡ Ţ lter on a DIN rail. DIN rail When the noise Ţ lter is grounded through the DIN rail, the proper noise attenuation may not be Name Plate achieved. Be sure to connect the protection earth (PE) of Noise the noise Ţ lter body to the earth. Filter I-6 Component Distributors, Inc. ~ www.cdiweb.com ~ 1-800-777-7334 ~ sales@cdiweb.com 15 15 (9) (2) 41 12 (2) 7 41 ±0.5 45 12 53 53