Ordering information Unit type ADA 1000 F -24 -O ADA1000F 12345 1Series name R 2Output wattage 3Universal input ADA 4Output voltage 5Optional G :Low leakage current E :Low leakage current and EMI class A F :with Fan unit(only -24) T :Vertical terminal block J :Connector type C :with Coating R :Remote ON/OFF N1:DIN rail W:Alarms and Redundant operation Specification is changed at option,refer to Instruction Manual. Please refer to derating curve, because the rated load current depends on cooling method that is convention cooling or forced air. SPECIFICATIONS MODEL ADA1000F-24 ADA1000F-30 ADA1000F-36 ADA1000F-48 ( ) VOLTAGE[V] AC85 - 264 1f or DC 120 - 350 AC70 or DC100 optionally available*6 FREQUENCY[Hz] 50/60 (47-63) or DC ACIN 100V 86typ (Io=100%) 86typ (Io=100%) 87typ (Io=100%) 87typ (Io=100%) EFFICIENCY[%] ACIN 200V 88typ (Io=100%) 88typ (Io=100%) 89typ (Io=100%) 89typ (Io=100%) ( ) INPUT ACIN 100V 0.99typ Io=100% POWER FACTOR ( ) ACIN 200V 0.98typ Io=100% 1 ( )( ) ACIN 100V* 20typ Io=100% More than 3sec.to re-start INRUSH CURRENT[A] 1 ( )( ) ACIN 200V* 40typ Io=100% More than 3sec.to re-start ( , )( ) LEAKAGE CURRENT[mA] 0.75max 60Hz According to IEC60950 and DEN-AN Io=100% VOLTAGE[V] 24 30 36 48 *2 ( ) ( ) ( ) ( ) ACIN 100V 21 Peak 63 convection 16.5 Peak 50 convection 14 Peak 42 convection 10.5 Peak 31.5 convection *2 ( ) ( ) ( ) ( ) ACIN 100V 33 Peak 63 forced air 26 Peak 50 forced air 22 Peak 42 forced air 16.5 Peak 31.5 forced air CURRENT[A] *2 ( ) ( ) ( ) ( ) ACIN 200V 25 Peak 83 convection 20 Peak 66 convection 16.5 Peak 55 convection 11.5 Peak 41.5 convection ACIN 200V*2 42 (Peak 83) forced air 33.5 (Peak 66) forced air 28 (Peak 55) forced air 21 (Peak 41.5) forced air LINE REGULATION[mV] 96max 120max 144max 192max LOAD REGULATION[mV] 150max 180max 240max 300max 3 0to+50 * 120max 160max 200max 200max C RIPPLE[mVp-p] 3 OUTPUT -10 - 0 * 160max 230max 260max 300max C 3 0to+50 * 150max 190max 230max 250max C RIPPLE NOISE[mVp-p] 3 -10 - 0 * 180max 250max 280max 400max C TEMPERATURE REGULATION[mV] 0to+50 240max 300max 360max 480max C 4 DRIFT[mV] * 96max 120max 144max 192max ( , ) START-UP TIME[ms] 500max ACIN 100V Io=100% ( , ) HOLD-UP TIME[ms] 20typ ACIN 100V Io=100% OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 21.6 - 27.0 27.0 - 33.0 33.0 - 41.0 41.0 - 52.8 OUTPUT VOLTAGE SETTING[V] 23.5 - 24.5 29.0 - 31.0 35.0 - 37.0 47 - 49 OVERCURRENT PROTECTION Works over 101% of peak current and recovers automatically OVERVOLTAGE PROTECTION[V] 31 - 34.5 40 - 48 51 - 60 64 - 76 PROTECTION CIRCUIT AND OPERATING INDICATION LED (Green) OTHERS ALARM OUTPUT Detecting low input voltage(PF), detecting low output voltage(LV). (Optional : -W, refer to Instruction Manual 5) ( ) ( , ) REMOTE ON/OFF RC Requirement for external source Option : -R refer to Instruction Manual 5 5 , , , ( ) INPUT-OUTPUT RC * AC3 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature - W , , , ( ) ISOLATION INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature W 5 , , ( ) OUTPUT RC-FG * AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature - W , , ( )( ), , ( , ) OPERATING TEMP. HUMID.AND ALTITUDE -10 to +71 20 - 90%RH Non condensing Refer to DERATING CURVE 3 000m 10 000feet max C , , ( ), , ( , ) STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 20 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 , ( ), , , VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 60minutes each along X Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once each X Y and Z axis , ( ), , ( ) AGENCY APPROVALS UL60950 C-UL CSA60950 EN60950 EN50178 Complies with DEN-AN and IEC60950 At only AC input SAFETY AND CONDUCTED NOISE Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B NOISE CE MARKING Low Voltage Directive, EMC Directive REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 ( )( ) CASE SIZE/WEIGHT 75 127 280mm W H D without terminal block /2.5kg max X X X X OTHERS COOLING METHOD Convection/Forced air KEISOKU-GIKEN: RM101). *1 The value is primary surge.The current of input surge to a built-in noise filter (0.2ms or less) is *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, excluded. with the input voltage held constant at the rated input/output. *2 Peak loading for 10sec.And Duty 35% max.Refer to Instruction Manual 4.Forced air is shown *5 Applicable when remote control (optional) is added. in Instruction Manual 2.3. *3 This is the value that measured on measuring board with capacitor of 22mF within 150mm *6 Derating is required.Consult us for details. from output terminal.Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to * A sound may occur from power supply at pulse loading. A-98