Manufacturers
CORNING MTX-ER-7-T
Description
Corning MTX-ER-7-T MTX Frame, Standard Usage with Complete Rear Trough Kit (troughs not installed) 213.3 x 76.2 x 61 cm / 84 x 30 24 inches (H x W x D). Gunmetal Gray Color.
Part Number
MTX-ER-7-T
Price
Request Quote
Manufacturer
CORNING
Lead Time
Request Quote
Category
PRODUCTS - M
Datasheet
Extracted Text
Corning MTX Frames and Accessories ® Cable Systems An Evolant Solutions Product Description With an industry-leading 1728-fiber capacity using SC connectors, the Corning Cable Systems Mass Termination Xchange (MTX) frame offers ultra-high termination density, easy termination access and superb jumper management in a minimal footprint. It provides flexible cable entry, cable type and connector options. Additionally, discrete connector access limits disturbance to adjacent connections, making the MTX ideal for high-speed networks. The MTX has been designed and tested for GR-63 NEBS and Telcordia GR-449 high- density frame compliance to assure that this quality product will meet today’s and tomorrow’s demands for density, fiber management and system integrity. Inter-bay jumper slack is controlled with the use of an isolated center-mounted slack bay. Intrabay routing is accomplished across the bottom routing trough or in any one of six rear- routing troughs. Features / Benefits • 1728-fiber capacity with SC connector (other small- form-factor connector types are available) • 84 x 30 x 24 in (H x W x D) MTX Full Frame | Photo ICH281 • Wide central jumper access zone • Integrated intrabay slack management • Accommodates typical legacy equipment ® products such as LGX compatible-type housings • 1.5-in bend radius throughout or rack-mounted electronics • Top or bottom cable entry • Designed and tested for NEBS GR-63 and Telcordia GR-449 compliances • Individual 12-fiber access • Optional rear routing troughs • Lower jumper trough – standard • Modules and module chassis available - Preconnectorized cable stubs - With adapters Product Specifications Corning MTX Frames and Accessories ® Cable Systems An Evolant Solutions Product Ordering Information Frames Corning Cable Systems offers two types of frames for the MTX, as well as a host of frame accessories. All frames are sold fully assembled with 3.0-in diameter central routing and storage spools installed. Dimensions (H x W x D) Shipping Weight Part Number Description cm (in) kg (lb) Color MTX-ER-7 Standard Usage Frames 213.3 x 76.2 x 61 113 (250) Gunmetal gray (rear troughs not included) (84 x 30 x 24) MTX-ER-7-T Standard Usage Frames with complete 213.3 x 76.2 x 61 113 (250) Gunmetal gray rear trough kit (troughs not installed) (84 x 30 x 24) Frame Extensions Used to secure primary frame structure to overhead ladder rack system. Ladder rack interface hardware not included. Part Number Description Color MTX-ER-EXT-7-9 2 ft Frame Extension Gunmetal gray MTX-ER-EXT-7-11 4.5 ft Frame Extension Gunmetal gray Note: These extensions do not permit the mounting of additional MTX termination hardware. MTX Full Frame | Photo ICH280 Page 2 Corning MTX Frames and Accessories ® Cable Systems An Evolant Solutions Product Ordering Information Frame Accessories Dimensions (H x W x D) Shipping Weight Part Number Description cm (in) kg (lb) Color MTX-RT Rear Troughs for MTX Frame 12.7 x 76.2 x 12.7 30 (66) Gunmetal gray (pack of six) (5 x 30 x 5) MTX-IFM-7 MTX Inter-bay Fiber Manager (IFM) 231.3 x 30.5 x 61 25 (55) Gunmetal gray (rear troughs not included) (84 x 12 x 24) MTX-IFM-7-T MTX Inter-bay Fiber Manager (IFM) 231.3 x 30.5 x 61 34 (75) Gunmetal gray with rear trough kit (trough kit (84 x 12 x 24) not installed) MTX-IFM-7-RT Rear Troughs for MTX IFM 17.8 x 30.5 x 12.7 20 (44) Gunmetal gray (pack of six) (7 x 12 x 5) Hardware Adapter Bracket Converts MTX frame mounting pattern to EIA or WECO for mounting hardware or electronics typically installed in traditional equipment rack. Dimensions (H x W x D) Shipping Weight Part Number Description cm (in) kg (lb) Color MTX-ADBKT-E EIA Mounting Hole Spacing 30.5 x 76.2 x 28 7 (15.4) Gunmetal gray (12 x 30 x 11) MTX-ADBKT-W WECO Mounting Hole Spacing 30.5 x 76.2 x 28 7 (15.4) Gunmetal gray (12 x 30 x 11) Rear Trough for MTX Frame (MTX-RT) | Photo ICH276 Rear Trough for MTX Inter-bay Inter-bay Fiber Manager (MTX-IFM-7-T) | Photo ICH273 Manager (MTX-IFM-7-RT) | Photo ICH274 Page 3 Corning MTX Frames and Accessories ® Cable Systems An Evolant Solutions Product Ordering Information Frame Accessories Part Number Description Color MTX-IBC-7 Inter-bay Jumper Channel – used when Gunmetal gray bringing in jumpers from overhead raceway into the rear of the termination modules; one unit fits either right or left side MTX-IBC-EXT-7-9 2 ft Inter-bay Jumper Channel Extension – Gunmetal gray used in conjunction with frame extensions to provide incoming jumper management up to 9 ft heights MTX-IBC-EXT-7-11 4.5 ft Inter-bay Jumper Channel Extension – Gunmetal gray used in conjunction with frame extensions to provide incoming jumper management up to 11.5 ft heights MTX-JMPR-RG-L Left Side Incoming Jumper Routing Spool – Gunmetal gray used in conjunction with the MTX-IFM-7 when bringing in jumpers to the rear of the MTX housing (six spools and divider plates per pack) MTX-JMPR-RG-R Right Side Incoming Jumper Routing Spool – Gunmetal gray used in conjunction with the MTX-IFM-7 when bringing in jumpers to the rear of the MTX housing (six spools and divider plates per pack) 003-601 Master MTX Instructional Document Jumper Routing Guide (MTX-JMPR-RG-L) | Photo ICH275 Inter-bay Channel (MTX-IBC-7) | Photo ICH272 Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-901-5973 • International: +1-828-901-5000 • www.corning.com/cablesystems Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. Evolant is a registered trademark of Corning Cable Systems Brands, Inc. Discovering Beyond Imagination is a trademark of Corning Incorporated. LGX is a registered trademark of Lucent Technologies. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. © 2003, 2006 Corning Cable Systems. All rights reserved. Published in the USA. EVO-397-EN / February 2006 / 2.5M
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MTX-ER-7-T have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods