CORCOM PE0SSDSXB

CORCOM Product Guide The CHAMELEON Adaptable Module for General, High Performance or Medical Applications P Series UL Recognized CSA Certified VDE Approved PS Unfiltered PS000SS30 PS Filtered H models provide susceptibility protection without leak- P Series age current associated with line-to-ground capacitors and The P series power entry module offers fuller flexibility of are designed to allow equipment to meet UL 544 for patient design in a more compact package. care and non-patient care equipment. As the first 10 amp module to provide all five power entry Also available is an interconnection block, B models. functions in one compact design, the CHAMELEON The block connects the voltage selection terminals of an module readily adapts to its environment and the needs of unfiltered CHAMELEON module with a switch and and IEC international markets. connector to reduce external wiring. • Snap-in or flange mounting L Models – High performance medical filter versions that are designed to help bring most digital equipment (includ- • IEC power line connector ing switching power supplies) into compliance with • Both North American and European fusing capabilities EN55022, Level B (as well as FCC part 15J, Class B) conducted emissions limits while additionally allowing • Two voltage selections equipment to meet UL544, UL2601and EN60601 for patient • Optional DPST on/off switch care equipment and non-patient care equipment. They are • Filtering options for general purpose, medical and available with current ratings of 6 and 10 amps. High high-performance applications. performance versions are available with horizontal mount- ing ears, single voltage, complete can shield with options The CHAMELEON modules compact design and modular for switch, fuses and current ratings only. Extenders are construction will allow you to select the power entry not available. features you require — without altering the panel cutout. And the Chameleon module, with adapters, will fit any Z Models – High performance filter versions are designed standard panel cutout. to help bring most digital equipment (including switching power supplies) into compliance with EN55022, Level B The CHAMELEON module has four filter options. (as well as FCC Part 15J, Class B) conducted emissions S models offer protection for general purpose applica- limits. They are available with current ratings of 6 and 10 tions where line-to-ground and line-to-line noise must be amps. High performance versions are available with controlled. The filters are designed to meet low leakage horizontal mounting ears, no extenders, single voltage, requirements of VDE portable equipment. They are complete can shield with options for switch, fuses and available in current ratings of 3, 6 and 10 amps. current ratings only. Tyco Electronics CORCOM Products PE Filter with "A" Shield 122 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0 Power Entry Modules CORCOM Product Guide The CHAMELEON Adaptable Module for General, High Performance or Medical Applications (Continued) P Series P Series Part Number Schematic Part numbers are constructed by selecting the alphanumeric character which represents the desired feature. Mounting Extender Switch Voltage Fuse Filter Filter Shield Style Options* Options Select Options Type Current Options* S J0 X S 6 0 P S Mounting Style Switch Option Fuse Options Filter Current E = Mounting ears 0 = Blank D = Dual fuse 0 = No filter (Horizontal) S = Double pole S = Single fuse 3 = 3 amps S = Snap-in single throw 6 = 6 amps M = Mounting ears (DPST) X = 10 amps (Vertical) Extender Input Voltage Select Filter Type Shield Options Option 0 = Single voltage 0 = No filter 0 = No shield 0 = None S = Dual voltage B = Interconnection A = Filter shield The part number PSJ0XSS60 would C = FN260 select (SMPS) block✝B = Complete represent the equivalent of CORCOM J = J Series X = Dual voltage H = Medical Filter Shield J Series 6J4. The part would feature L = L Series select (series/parallel) L = High Performance C = Complete can the J extender to fit the current 6J4 Medical (for L & Z models) S = General purpose panel cutout, and includes no switch, Z = High Performance dual voltage select, single fusing, and a 6-amp general purpose filter. Part Numbers (partial list) Extender for PS000S000 PE000DL6C J-Series or others PS0XSS000 PE000DLXC Fuse holder PS0S0SBX0 PE000DZ6C PS000SH30 PE000DZXC PS00SDH3A PE000SL6C PS0S0SH60 PE000SLXC PS0SSDH6A PE000SZ6C PS00SSHXA PE000SZXC PS0SSSHX0 PE000SS30 Optional switch PS000SS30 PE0S0SS30 PS0S0SS30 PE000SS60 PS0SSSS6B PE0SSSSX0 PS0SXDS60 PE000SZXC PSJ0XSS60 PE0SSS000 Optional filter PSLS0SS60 PE0SSSH60 PS0SXSS60 PE0S0DL6C PS00SSSXA PE0S0DLXC PS0SSSSX0 PE0S0DZ6C PE0S0DZXC PE0S0SL6C PE0S0SLXC PE0S0SZ6C Additional extender which allows the P series to adapt to CORCOM's L PE0S0SZXC series product cutout, as well as the panel cutout of Schaffner and Delta parts is available. * Extenders cannot be added to units with B shields. ✝ When using the interconnection block, the last 3 digits of the part number are BX(0, A, or B). 123 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0 CORCOM Product Guide The CHAMELEON Adaptable Module for General, High Performance or Medical Applications (Continued) Filter Options P Series Four filtering options are available in three current ratings. S models (those with an S as the seventh digit) provide general purpose filtering for both line-to-ground and line- Voltage Selection to-line noise. The increased inductance of the P series The P series of power entry modules provides a dual allows better performance than most power entry modules on the market. The S models will generally allow voltage selector which is integrated with the fuseholder. compliance with FCC limits for linear power supplies. To simplify the wiring in each individual application, Tyco Electronics provides dedicated voltage selectors for The high-performance Z models are available for general different voltage selection schemes. The two most popular applications requiring higher attenuation. schemes are the parallel and serial for dual primary The H models greatly reduce line-to-ground capacitance transformers and the “DPST switch” for switching mode in compliance with UL 544 low leakage current power supplies (jumper types.) P series products with an specification. “S” as the fifth digit are specifically designed for “jumper” The high-performance L models are available for medical type applications associated with switching mode power applications requiring higher attenuation. supplies. Electrical Schematics P series products with an “X” as the fifth digit are specifi- H Model cally designed for dual primary transformer applications. The voltage selector installed will allow proper wiring from these applications. No matter what voltage selection scheme is used, wiring is always made to the same four terminals. Fuseholder S Model Another feature of the P series power entry module is a ver- satile fusing arrangement. Its fuseholder can hold two 1/4” x 1-1/4” or 5 x 20mm fuses. It can also be converted to accept one fuse with a conversion clip that bridges one of the two fuse chambers. L Model The conversion clip is installed on the P Series power entry modules set for single fusing (those with part numbers with LINE LOAD an “S” as the sixth digit). Units with a “D” as the sixth digit do not include a conversion clip. Interconnection Block Installation of the unfiltered versions of the P series involves Z Model wiring of the IEC socket to the switch and the switch to the LINE LOAD fuseholder. Labor can be eliminated by ordering the product with an interconnection block. This feature, designated by a BX in the seventh and eighth digits, prewires the module for easier installation. The wiring is protected with the plastic case to better prevent access to Shield the terminals and connections. A new feature available on the P series is an RF shield. The metal shield, available on filtered models, provides Wiring can be further simplified by ordering a PA100 shielding from radiated emissions and provides an connector assembly. See page 131 for accessories. additional RF ground for the filter to the case. The dimensions of this alternative are the same as the The shield is available in two versions, a shield of the filter filtered versions. components (designated by A as the ninth digit) and a complete shield (designated by B as the ninth digit). The A shield covers the filter portion of the module and increases performance of the filter by protecting the components from magnetic coupling. This shield improves RF ground connection to the case while still allowing the use of the P Series extender. The B shield covers the entire power entry module with metal, protecting the equipment from all radiated noise. Used with the filter, the shield provides the most secure protection from RFI noise problems. The B shield cannot A Shield B Shield be used with any extender. 124 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0 Power Entry Modules CORCOM Product Guide The CHAMELEON Adaptable Module for General, High Performance or Medical Applications (Continued) P Series Specifications – Unfiltered Models Specifications – Filtered Models Hipot rating (one minute): Maximum leakage current, each line-to-ground: line-to-ground 1500 VAC @ 120 VAC 60 Hz: H Models 2 μA line-to-line 1450 VDC S Models 0.25 mA @ 250 VAC 50 Hz: H Models 5 μA Operating frequency: 50/60 Hz S Models .50 mA Rated voltage (max.): 250 VAC Hipot rating (one minute): line-to-ground 1500 VAC Rated current, all unfiltered models: 10A @ 120 VAC line-to-line 1450 VAC 10A @ 250 VAC Operating voltages: Operating voltages: Selectable or fixed 115/230 VAC Selectable or fixed 115/230 VAC Fuseholder: Accepts one or two fuses Operating frequency: 50/60 Hz 1/4 x 1-1/4 or 5 x 20 mm Rated voltage: 120/250 VAC Conversion clip provided on fuseholder Conversion clip provided on fuseholder for single fuse models. for single fuse models Switch: Double-insulated, rated Switch: Double-insulated rated for 10,000 for 10,000 operations at full load. operations at full load. 51 Amp inrush capability. 51 Amp inrush capability Terminals: .187 x .032 [4.8 x .81] terminal tabs Terminals: .187 x .032 [4.8 x .81] terminal tabs Minimum insertion loss in dB: Recommended use connector - no solder Line-to-ground in 50 ohm circuit Voltage Selection Schemes Current Frequency-MHz Rating .03 .1 .15 .5 1 3 5 10 30 H Models 1) Dual Primary Transformer Type: 03A 7 17 21 27 30 29 26 23 15 06A - 811151719181613 115V 230V Power on/off 10A 3 5 8 10 12 11 11 10 10 Hot G A S Models 115V 03A 7 17 21 27 33 40 44 50 32 Note 1 Note 2 B Ground 06A - 8 12 17 23 32 36 44 30 C Note 1 Note 2 10A - 3 5 10 13 23 27 35 27 115V Neutral H D Transformer Current Frequency-MHz primary Provision for Rating .01 .05 .1 .15 .5 1 5 10 30 single fusing Z Models 06A 8 21 27 30 37 43 49 52 42 2) Jumper Type: 10A 5 17 22 24 27 32 52 47 40 L Models 115V 230V 06A 8 21 27 29 34 35 25 21 16 Power on/off 10A 5 17 22 23 24 25 21 18 14 Power Hot G A input Note 1 Note 1 B Line-to-line in 50 ohm circuit Ground Sel. C Current Frequency-MHz Jumpers Note 1 Note 1 Rating .10 .15 .5 1 3 5 10 30 Neutral H D H Models SMPS Provision for 03A 2 4 12 18 31 40 48 41 single fusing 06A 2 4 12 16 26 35 40 35 10A 2 4 12 16 26 33 40 32 Note 1: Jumpers are required if a filter or interconnection module is not S Models used. 03A 2 4 12 15 30 48 50 45 06A 2 4 12 15 22 42 55 45 Note 2: Location of optional filter. Jumpers are required if a filter or 10A 2 4 12 15 22 42 55 45 interconnection module is not used. Current Frequency-MHz Rating .01 .05 .1 .15 .5 1 5 10 30 Z Models 06A 10 15 34 44 75 75 75 70 60 10A 10 20 20 35 67 75 75 70 60 L Models 06A 10 15 34 44 75 75 75 70 60 10A 10 20 20 35 67 75 75 70 60 125 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0 CORCOM Product Guide The CHAMELEON Adaptable Module for General, High Performance or Medical Applications (Continued) P Series Case Styles Filtered PS/PSL Unfiltered Panel Cutout 0.06 R Max. 1.52 C C E 0.02 R (1) Min. .508 .225 D Max. B1 .225 B2 5.72 (1) For snap-in applications, the D 5.72 A sides of the cutout must have a .02 [.508] radius on the installation side. Note: Snap-in models allow front mounting only. PS not recommended for plastic panels. Filtered PE Unfiltered Panel Cutout .06 R Max 1.52 E C C .020 R Min .508 D .225 .225 D Max. Max. B1 B2 5.72 5.72 F F A Filtered PM Unfiltered Panel Cutout A D D F E F C .06 .225 .225 Max. B2 1.52 Max. B1 5.72 5.72 R Max 126 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com ACTUAL specified. Values in italics Specifications subject 1-508-992-4495 MEASUREMENTS are metric equivalents. to change. Germany: 49-89-6089-0 A = 1.2" B = 2.13" C = 2.9" D = 2.13" E = 2.496" .06 F = 1.050 1.52 Power Entry Modules CORCOM Product Guide The CHAMELEON Adaptable Module for General, High Performance or Medical Applications (Continued) P Series Case Styles Filtered PSC/PSJ Unfiltered Panel Cutout 0.06 R Max. 1.52 C C E 0.02 R (1) Min. .508 D (1) For snap-in applications, the D .225 .225 Max. B1 B2 5.72 sides of the cutout must have a .02 5.72 A [.508] radius on the installation side. Note: Snap-in models allow front mounting only. PS not recommended for plastic panels. Filtered Versions Case Dimensions AB1 B2 C D E F Part No. +.008/-.000 +.008/-.000 "A" Shield (max) (max) (max) (max) +.20/-.00 +.20/-.00 1.24 1.93 2.13 2.31 1.06Δ 2.201* PS — 31.49 49.02 54.1 58.67 26.93 55.91 1.24 1.93 2.13 2.31 1.12 2.201* PSL — 31.49 49.02 54.1 58.67 28.45 55.91 C 1.98 1.93 2.13 2.31 1.122 2.201* 1.575 PE 50.29 49.02 54.1 58.67 28.5 55.91 40.0 1.24 1.93 2.13 2.9 1.06 2.13 2.496 PM 31.49 49.02 54.1 73.66 26.93 54.1 63.4 1.24 1.93 2.13 2.51 1.06 2.52 PSC — 0.225 Max. B 31.49 49.02 54.1 63.75 26.93 64.01 .508 + 1.24 1.93 2.13 2.72 1.06 2.6 PSJ — 31.49 49.02 54.1 69.09 26.93 66.0 "B" Shield * Panel cutout for thickness of .031 - .079 [0.8 - 2.0]. For panel thickness at .083 - .114 [2.1 - 2.9] use 2.213 [56.21]. + Panel cutout for thickness of 0.06 - 0.09 [0.76 - 2.29]. Δ For shielded models use D=1.12 +.008/-.000. Shields can be used only with filtered models. Shields add approximately 0.06" to depth. B shield may not be used with J or C extender. C Rear View Filtered Unfiltered 0.225 Max. B BC A D .508 BC D A LN 127 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0