Manufacturers
CORCOM 6VS1
Description
FILTER LINE 6A FASTONS
Part Number
6VS1
Price
Request Quote
Manufacturer
CORCOM
Lead Time
Request Quote
Category
PRODUCTS - 6
Datasheet
Extracted Text
CORCOM Product Guide Multipurpose Power Line RFI Filter for Emission Control and High-Noise Industrial Environments S Series UL Recognized CSA Certified 20VS1 VDE Approved 3A, 6A, 10A S Series Specifications Maximum leakage current,each line-to-ground The S series filters combine Tyco Electronics successful @ 120 VAC 60 Hz: .4 mA line-to-ground interference rejection filters with additional @ 250 VAC 50 Hz: .7 mA circuitry designed to reduce line-to-line noise and transients. Hipot rating (one minute): line-to-ground 2250 VDC These filters feature an N = 2 ( “L” ) line-to-ground impedance to common mode noise and an N = 3 ( “Pi” ) line-to-line 1450 VDC differential mode impedance line-to-line. This series is Operating frequency: 50/60 Hz designed for use when equipment impedance at RF Rated voltage (max.): 250 VAC frequencies is high. These filters will better protect equipment from Rated current: malfunctions due to conducted interference coming into 3VS 3A the equipment from the line, especially line-to-line noise 6VS 6A and transients. They will also provide needed noise 10VS 10A suppression to allow most equipment (including switch- 20VS 20A mode power supplies) to meet FCC specifications for Minimum insertion loss in dB: conducted emissions. Line-to-ground in 50 ohm circuit The S series is also effective to control emissions in 2 equipment using SCR and T L circuits, for compliance Current Frequency–MHz with FCC Part 15, Subpart J, and EN55022, Level A, Rating .15 .5 1 2 5 10 20 30 down to 150kHz. 3A 15 27 35 40 32 44 47 47 6A 15 27 35 40 32 44 47 47 Electrical Schematics 10A 15 27 35 40 32 44 47 47 3A, 6A, 10A 20A 15 30 38 38 32 43 42 40 Line-to-line in 50 ohm circuit LINE LOAD Current Frequency–MHz Rating .15 .3 .5 1 2 5 10 20 30 3A 35 50 65 65 65 60 50 40 45 6A 35 50 65 65 65 60 45 48 48 10A 35 50 65 65 65 60 50 40 45 20A 20A 35 50 65 65 65 60 45 48 48 LINE LOAD Resistor location for reference only. 80 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0 RFI Power Line Filters CORCOM Product Guide Multipurpose Power Line RFI Filter for Emission Control and High-Noise Industrial Environments (Continued) S Series Case Styles Case Dimensions AB C D E 3A, 6A, 10A Part No. ± .015 (max) (max) (max) (max) ±.38 3.36 1.82 1.16 2.375 2.78 3VS1 85.3 46.2 29.5 60.33 70.6 3.86 2.08 1.53 2.938 3.34 B 6VS1 98.0 52.8 38.9 74.63 84.8 3.86 2.08 1.53 2.938 3.34 10VS1 98.0 52.8 38.9 74.63 84.8 D 5.23 3.38 1.53 3.75 4.20 20VS1 E 132.8 85.9 38.9 95.25 106.7 C A 5.34 3.38 1.53 3.75 4.20 20VS6 135.6 85.9 38.9 95.25 106.7 Typical dimensions: Terminals: .250 [6.35] (5) Holes: .07 [1.8] Dia.(4) Slot: .07 x .16 [1.8 x 3.8] Mounting holes: .188 [4.78] Dia. (2) 20VS1 Part Numbers .250 x .156 Slots: (4) 6.35 x 3.96 3VS1 10VS1 6VS1 20VS1 20VS6 E D B 2.00 50.8 A C Typical dimensions: Terminals: .250 [6.35] (5) Holes: .07 [1.8] Dia.(4) Slot: .07 x .16 [1.8 x 4.1] Mounting holes: .25 x .156 [6.35 x 3.96] Dia. (4) 20VS6 Terminals: No. 8-32 (5) E D B 2.00 50.8 C A Typical dimensions: Mounting holes: .25 x .156 [6.35 x 3.96] Dia. (4) Torque 18 ± 2 in.lb 81 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 6VS1 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods