CORCOM Product Guide Power Entry Module with RFI Power Line Filter for General or Medical Applications L Series UL Recognized CSA Certified VDE Approved EDL4C/EHL4C EDL1S/EHL1S L Series The L series power entry modules are compact units that EDL Models combine a multi-function power entry module and high per- The RFI filter is for general purpose applications where formance RFI filtering capabilities. They are available with line-to-line and line-to-ground noise must be controlled. either a four-voltage selector or a DPST on/off switch. Both The filter is designed to meet the very low leakage variations can be specified with North American or requirements of VDE portable equipment. They are European fusing capabilities and are available in either available in three current ratings. flange or snap-in mounting. EHL Models These filters are UL recognized, CSA certified, and VDE This medical filter provides susceptibility protection approved. The L series modules offer a choice of filters for without the leakage current associated with line-to-ground general or medical applications. capacitors. Designed to allow equipment to meet UL544 for patient care and non-patient care equipment, the EHL filter has a maximum leakage current of 2 µA at 120 VAC 60 Hz. See Appendix C for more information on medical applications and UL standards. UNFILTERED MODELS Current Rating Current Rating Available Voltage DPST Part Mounting Fuseholder @120VAC @250VAC Selection On/Off Number Style Type (Amps) (Amps) Position Switch 6EL1S 6 6 1 • • Flange North American 6EL1SC 6 6 1 • • Snap-In North American 6EL1SM 6 6 1 • • Flange Metric 6EL1SCM 6 6 1 • • Snap-In Metric 6EL4 6 6 4 – Flange North American 6EL4C 6 6 4 – Snap-In North American 6EL4M 6 6 4 – Flange Metric 6EL4CM 6 6 4 – Snap-in Metric • • Includes DPST switch 108 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0 Power Entry Modules CORCOM Product Guide Power Entry Module with RFI Power Line Filter for General or Medical Applications (Continued) L Series FILTERED MODELS RFI Current Rating Current Rating Available Voltage DPST Part Mounting Fuseholder Filter @120VAC @250VAC Selection On/Off Number Style Type Type✝(Amps) (Amps) Position Switch 2EDL1S Linear 2 2 1 • • Flange North American 2EDL1SC Linear 2 2 1 • • Snap-In North American 2EDL1SM Linear 2 2 1 • • Flange Metric 2EDL1SCM Linear 2 2 1 • • Snap-In Metric 2EDL4 Linear 2 2 4 – Flange North American 2EDL4C Linear 2 2 4 – Snap-In North American 2EDL4M Linear 2 2 4 – Flange Metric 2EDL4CM Linear 2 2 4 – Snap-in Metric 4EDL1S Linear 4 4 1 • • Flange North American 4EDL1SC Linear 4 4 1 • • Snap-in North American 4EDL1SM Linear 4 4 1 • • Flange Metric 4EDL1SCM Linear 4 4 1 • • Snap-in Metric 4EDL4 Linear 4 4 4 – Flange North American 4EDL4C Linear 4 4 4 – Snap-in North American 4EDL4M Linear 4 4 4 – Flange Metric 4EDL4CM Linear 4 4 4 – Snap-in Metric 6EDL1S Linear 6 6 1 • • Flange North American 6EDL1SC Linear 6 6 1 • • Flange North American 6EDL1SM Linear 6 6 1 • • Flange Metric 6EDL1SCM Linear 6 6 1 • • Snap-in Metric 6EDL4 Linear 6 6 4 – Flange North American 6EDL4C Linear 6 6 4 – Snap-in North American 6EDL4M Linear 6 6 4 – Flange Metric 6EDL4CM Linear 6 6 4 – Snap-in Metric 6EHL1S Medical 6 6 1 • • Flange North American 6EHL1SC Medical 6 6 1 • • Snap-in North American 6EHL1SM Medical 6 6 1 • • Flange Metric 6EHL1SCM Medical 6 6 1 • • Snap-in Metric 6EHL4 Medical 6 6 4 – Flange North American 6EHL4C Medical 6 6 4 – Snap-in North American 6EHL4M Medical 6 6 4 – Flange Metric 6EHL4CM Medical 6 6 4 – Snap-in Metric ✝ Refer to catalog page 97 for more information on RFI filter types. • • Includes DPST switch Voltage Voltage Selection selection slot 4-Voltage To change selected voltage: disconnect the power cord; selection wheel open cover using a small blade screwdriver or similar tool; Fuseholder insert the tool into the voltage selection slot and remove wheel from unit; select desired voltage; replace wheel into Cover unit and close cover, making sure the selected voltage appears in connector window. Note: All models have North American or dual European fusing capability and are available in either flange or snap-in mounting. 109 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0 CORCOM Product Guide Power Entry Module with RFI Power Line Filter for General or Medical Applications (Continued) L Series Specifications – Unfiltered Models Specifications – Filtered Models Maximum leakage current, each line-to-ground: Rated current: 6A @ 120 VAC @ 120 VAC 60 Hz: EDL Models 0.25 mA 6A @ 250 VAC EHL Models 2 μA Operating voltages: @ 250 VAC 50 Hz: EDL Models 0.50 mA 6EL1S & 6EL1SC Models-Fixed 250 VAC Max. EHL Models 5 μA 6EL4 & 6EL4C Hipot rating (one minute): Models-Selectable 100, 120, 220, 240 VAC line-to-ground EDLModels 1500 VAC EHL Models 1500 VAC Operating frequency: 50/60 Hz line-to-line EDLModels 1450 VDC EHL Models 1450 VDC Rated voltage: 250 VAC Operating voltages: Switch: Double-insulated, rated for 1S_&1SC_Models - Fixed max. 250 VAC 6EL1S & 6EL1SC 10,000 operations at full load. 4_&4C_Models-Selectable 100,120, 220,240 VAC (models only) 51 Amp inrush capability Operating frequency: 50/60 Hz Fuse (not included): Accepts one 1/4" x 1-1/4" fuse, Rated voltage (max.): 250 VAC or two 5 x 20 mm fuses Switch: Double-insulated, rated Terminals: .110 [2.79] terminals except for switch. (1S_&1SC_ models only) for 10,000 operations .187 [4.8] terminals for switch. at full load. 51 Amp inrush capability. Electrical Schematics Fuse (not included): Accepts one 1/4" x 1-1/4" fuse DL Models (with switch) or two 5 x 20 mm fuses Customer Transformer On/Off Primaries Terminals: .110 [2.79] terminals Neutral except for switch Note 1 2 1 (1) (1a) .187 [4.8] terminals for switch. Device Note 2 Minimum insertion loss in dB: (2) (2a) Line-to-ground in 50 ohm circuit 3 4 Hot Current Frequency-MHz Rating .05 .15 1 5 10 30 HL Models (with 4-voltage selection) Customer EDL Transformer 2A 6 14 24 40 45 50 Primaries 4A 2 8 18 32 38 45 6A 1 6 17 31 37 45 G EHL Hot 06A 3 8 15 18 18 18 Line-to-line in 50 ohm circuit Current Frequency-MHz Neutral Note 1 Rating .05 .5 1 3 5 10 30 H EDL DL Models (with 4-voltage selection) 2A 7 16 21 23 37 47 50 Customer 4A 6 14 18 23 26 45 47 Transformer Primaries 6A 6 15 20 25 24 45 50 EHL G 06A 4 14 20 28 32 38 42 Hot HL Models (with switch) Customer Power Transformer On/Off Primaries Neutral Note 1 2 1 Note 1 Neutral (1) (1a) H Note 2 Note 1: Provision for dual European style fusing. (2) (2a) Note 2: On/Off switch present only with "S" suffix. 4 3 Hot Resistor location for reference only. 110 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0 Power Entry Modules CORCOM Product Guide Power Entry Module with RFI Power Line Filter for General Flange mounted version or Medical Applications (Continued) L Series Case Styles — Unfiltered Models Case Styles — Filtered Models Flange Models Flange Models 3 4 1 2 G H C D D C F Side View Side View .221 B E 5.61 .221 A E 5.61 .06 R 1.52 3 4 * 2.201 1 2 55.91 G H 2.213* 56.21 Snap-In Models .020 R .508 * 1.122 28.50 AC E * +.008, -.00 1.575 D F +.203 -.00 B 40.00 Back View Recommended Panel Cutout G H C D Typical dimensions: Mounting Holes: .126 [3.20] Dia. (2) All backplate terminals: .110 [2.79] terminals, except for switch. Switch terminals are .187 [4.765] Note: Snap-in models allow front mounting only. Side View .221 E 5.61 Snap-In Models Note: Metric fuse models have additional jumper from filter-to-module. C D Side View F Case Dimensions .221 A E 5.61 AB C D E F .06 ±.015 R Part No. (max) (max) (max) (max) (max) 1.52 ±.038 AC E Flange 1.98 1.575 2.3 2.14 1.66 1.11 2.201 * B D F (1) 55.91 Unfiltered 50.29 40.0 58.42 54.36 42.16 28.19 G H * 2.213 (2) Snap-in 1.28 2.3 2.14 1.66 1.11 56.21 .020 — R .508 Unfiltered 32.51 58.42 54.36 42.16 28.19 * 1.122 Flange 1.98 1.575 2.3 2.14 2.01 1.11 28.50 * +.008, -.00 Filtered 50.29 40.0 58.42 54.36 51.05 28.19 +.203 -.00 Back View Recommended Panel Cutout Snap-in 1.28 2.3 2.14 2.01 1.11 — Filtered 32.51 58.42 54.36 51.05 28.19 (1) For panel thickness of .031-.079 [0.8-2.0] (2) For panel thickness of .083-.126 [2.1-3.2] (3) For snap-in application, the 1.22 [28.5] sides of the cutout must have a .02 [.508] radius on the installation side. All backplate terminals: .110 [2.79] terminals, except for switch. Switch terminals are .187 [4.75] Note: Snap-in models allow front mounting only. 111 Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.cor.com Revised 03-04 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com specified. Values in italics Specifications subject 1-508-992-4495 are metric equivalents. to change. Germany: 49-89-6089-0