SOLDERING STATIONS WSD81/WSD161 Digital Silver Series Soldering Stations WSD81PU WPH81 The Weller Advantage • You experience immediate heat from the combination of a unique silver heating element and tip configuration - allows faster, more efficient, soldering • High output pencil allows you to work with lead-free WSP80 solder while keeping tip costs low WSD81 includes: WSD81PU power unit, WSP80 soldering • The WSD161 operates on two independently controlled pencil, and WPH81 stand and sponge. channels.You can operate two 80-watt tools simutaneously Additional Product Features and Benefits: • IMPROVED - Software has been upgraded to allow the power unit to cycle faster, giving you improved response time • IMPROVED - A standard setback feature has been added to save tip life and power. If the soldering pencil is not used for 20 minutes, the temperature is reduced to 300°F (150°C). After 60 minutes of inactivity, the unit is switched off • 80-watts of controlled power allows you to work on high-mass components and boards • Fast recovery and minimal temperature loss when making fast connections, makes this station perfect for continuous production soldering • Programmable using the optional WCB1 control module - allows for temperature lock-out (process control), temperature set-back (extended tip life) and °F to °C conversion • Irons fitted with a non-burnable silicone rubber cord for safety WSD161 includes the power unit only. Soldering • UL and cUL listed pencils and stands are sold separately. • ESD safe to protect sensitive components • Uses economical LT series tips (page 9), which are now tinned using LEAD-FREE SOLDER to comply with changing demands • Stations also support the WTA50 Thermal Tweezer, WHP80 Hot Plate, and WST20 Thermal Wire Stripper Station WSD81 WSD161 Pencil WSP80 Voltage 120V (input); 24V (output) 120V (input); 24V (output) Power Consumption 80W Power Consumption 95W 150W Heating Element Type Silver Spool Temperature Range 150°F - 850°F (66°C - 454°C) 300°F - 850°F (150°C - 454°C) Iron Cord Length 4 ft. (1.22 m) Footprint 6 1/2 X 4 1/2 X 4 IN (165 X 114 X 102 CM) 6 1/2 X 4 1/2 X 4 IN (165 X 114 X 102 MM) Supplied Tip LTB Weight 7.0 lb. (3.18 kg) 7.0 lb. (3.18 kg) Iron Stand WPH81 Temperature Accuracy +/- 9°F (+/-5°C) +/- 9°F (+/-5°C) Temperature Stability +/-10°F (6°C) +/-10°F (6°C) ESD Safe? Yes Yes Applications: • Production, rework, and repair of through hole and SMT boards. Contact removal of IC’s and QFP’s using specialty SMT tips. Lead-free solder applications. Heavy ground planes and multi-layered boards. A SMT quad tip is used to desolder a The WSP80 in use on a surface The WCB1 control module is used to mount PCB. quad flat pack. set temperature lockout, set back, and °F to °C conversion. 8