SMD175-24 - CONVERSION DEVICES

Description

Conversion Devices SMD175-24 Eagle Series SMD175-24 Medical Grade Power Supply - 24 Volt, 175 watts, Single Output

Part Number

SMD175-24

Price

Request Quote

Manufacturer

CONVERSION DEVICES

Lead Time

Request Quote

Category

PRODUCTS - S

Specifications

DC OK

Efficiency

75% typical at full load

EMI filter

CISPR 11 Class “B”, FCC Class “B”, EN55011 Class B

External/off

A logic low shuts down the power converter

Frequency

47 to 63Hz

Hold-up time

20 ms @ 200 W load, nominal line (115VAC)

Input range

85 to264VAC

Inrush current

37A maximum @ 240VAC under cold start @ 25 °C

Leakage current

Less than 135µA @132VAC and maximum 270µA @264VAC. Lower leakage models optional. Contact factory for option code

Maximum power

175 watts with 150 LFM min. of customer provided cooling. 200 watts max. with optional fan cover (suffix “-C”).

TTL active high @ 90% of output regulation.

Overload protection

Fully protected against short circuit and output overload. Automatic recovery

Overvoltage protection

10% to 25% above nominal output

Power factor

0.99 typical

Power failure

TTL active high, goes low 5msec before loss of regulation

Remote sense

Compensates for 0.5 V lead drop min. Will operate without remote sense connected.

Features

12 volt Vdc, 250 mA fan output
Compact size 4.5"W x 7.0"L x 1.7"H
CSA 22.2 No. 601.1
Medical Approved to UL2601, IEC601-1 and
Over voltage, over current & over temperature protection
Power factor corrected to IEC 1000-3-2

Datasheet

SMD175-2-3369188434.pdf

928 KiB

Download

Extracted Text

Medical 150 to 175 Watts EAGLE SERIES Model SMD175 Max. Output Power 175 watts Output Channels Single Output Input Mains Voltage 85 to 264VAC STANDARD FEATURES ELECTRICAL SPECIFICATIONS Input • Over voltage, over current & over temperature Input range .................................85 to264VAC protection Frequency ..................................47 to 63Hz Leakage current ………………...Less than 135µA @132VAC • Compact size 4.5"W x 7.0"L x 1.7"H and maximum 270µA @264VAC. Lower leakage models optional. Contact factory for option code • Power factor corrected to IEC 1000-3-2 Inrush current ...........................37A maximum @ 240VAC under cold start @ 25°C • 12 volt Vdc, 250 mA fan output Efficiency ..................................75% typical at full load EMI filter ....................................CISPR 11 Class “B”, FCC • Medical Approved to UL2601, IEC601-1 and Class “B”, EN55011 Class B CSA 22.2 No. 601.1 Power factor ..............................0.99 typical Output Maximum power.........................175 watts with 150 LFM min. ENVIRONMENTAL of customer provided cooling. 200 watts max. with optional fan cover (suffix “-C”). Hold-up time...............................20 ms @ 200 W load, nomi- Operating temperature: 0°C to 50°C derate output nal line (115VAC) power at 2.5% per degree from 50° to 70°C Overload protection ...................Fully protected against short circuit and output overload. Automatic recovery Storage temperature: -40°C to 85°C Overvoltage protection ..............10% to 25% above nominal output Logic Control Temperature coefficient: ± 0.03% per °C Power failure .............................TTL active high, goes low 5 msec before loss of regulation EMI compliance to CISPR 11 Class B External/off ............................... A logic low shuts down the power converter DC OK .......................................DC Humidity: Operating; non-condensing 0% to 95% OK .............................................TTL active high @ 90%of output regulation. MTBF calculated >296,000 hours at full load 25°C Remote sense ...........................Compensates for 0.5 V lead ambient conditions per MIL-HDBK-217F, Notice 2 drop min. Will operate without remote sense connected. 15481 Electronic Lane Huntington Beach, CA 92649 (714) 898-6551 Fax: (714) 894-9248 e-mail: sales@cdipower.com www.cdipower.com AIRFLOW DIRECTION TOP 6-32 MOUNTING HOLES IN 2 PLACES EA. SIDE Conversion Devices, Inc. Medical Power Supplies since 1981 EAGLE SERIES ORDERING INFORMATION Model Output Maximum Maximum Minimum Typical Ripple Voltage 1 2 3 Number Voltage Current Current Load Regulation P/P (PARD) Adjust SMD175-12 12V 16.50A 12.5A 0A ± 1% 120 mV ± 5% SMD175-15 15V 13.3A 10A 0A ± 1% 150 mV ± 5% SMD175-24 24V 8.3A 6.2A 0A ± 1% 240 mV ± 5% SMD175-28 28V 7.2A 5.3A 0A ± 1% 280 mV ± 5% SMD175-30 30V 6.6A 5.0A 0A ± 1% 300 mV ± 5% SMD175-36 36V 5.5A 4.2A 0A ± 1% 360 mV ± 5% SMD175-48 48V 4.2A 3.2A 0A ± 1% 480 mV ± 5% 1. Maximum continuous rating with 150LFM of directed airflow or with optional fan cover (suffix “-C”) 2. Unrestricted convection cooling 3. Measured with 20MHz bandwith at nominal line full load I/O CONNECTORS MECHANICAL AC INPUT (J1) MOLEX PCB HEADER p/n 39-30-2056 PIN # REFERENCE 1.7O" 4.50" [114.30] OUTPUT [43.18] 1 AC GROUND V. ADJ. 0.250" 2 N/C [6.35] 3 AC NEUTRAL FAN J2 SIGNALS OUTPUT J3 OUTPUT 4 N/C 5 AC LINE MATING CONNECTOR MOLEX P/N HOUSING 39-01-4051 CONTACTS 39-00-0164 OUTPUT (J3) MOLEX PCB HEADER p/n 39-29-9085 PINS REFERENCE 6-32 MOUNTING HOLES IN 4 LOCATIONS 3,4,7,8 VOUT + 7.0" 6.50" .606" [15.4] 1,2,5,6 RETURN [177.80] [165.10] MATING CONNECTOR MOLEX P/N HOUSING 39-01-2080 CONTACTS 39-00-0163 SIGNALS INTERFACE (J2) AMP 641215-6 PIN REFERENCE 2.79" [7.09] 1 INHIBIT 2 + SENSE F2 F1 3 POWER GOOD 0.550" .250" J1 [13.97] [6.35] INPUT 4 - SENSE 1.278" 5 COMMON [32.46] 1.944" Optional 1.278" Fan Cover [32.46] [49.38] 6 POWER FAIL MATING CONNECTOR AMP P/N HOUSING 770602-6 CONTACTS 770666-6 NOTES FAN CONNECTOR (J4) AMP 641215-2 a. Other output voltages available upon request. Contact CDI Sales PIN REFERENCE b. Specifications subject to change without notice 1 FAN OUTPUT - c. All dimensions in inches, tolerance is ±.02” 2 FAN OUTPUT +(12V) d. Specifications are at factory settings MATING CONNECTOR AMP P/N e. Mounting maximum insertion depth is 0.12” HOUSING 770602-2 CONTACTS 770666-02 f. Warranty: 1 year 15481 Electronic Lane Huntington Beach, CA 92649 (714) 898-6551 Fax: (714) 894-9248 e-mail: sales@cdipower.com www.cdipower.com Rev. F

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products