CONTEMPORARY CONTROLS PCX Series
Specifications
Compliance
PCX Series NIMs are fully compatible with all of contemporary Controls' ARCNET products and PC/XT/AT computers
Data Rate
2.5Mbps
Dimensions
3.9" x 4.3" (99mm x 109mm)
Interrupt Lines
Supports strapping of IRQ 2/9, 3, 4, 5 or 7
Operating Temperature
0C to +60C
Storage Temperature
-40C to +85C
Features
- CMOS design for low-power consumption
- Interfaces ARCNET with XT/AT (ISA) bus computers
- Node address switch accessible without removing the PCX from computer
- One-third height PC board
- Provides socket for 8 kB auto-boot ROM
- Supports coaxial, twisted-pair, or glass fiber optic cablingSupports 16 kB memory mapping, minimizing memory addressing conflicts
- Utilizes COM90C65 ARCNET controller
Datasheet
Extracted Text
PCX Series ® ARCNET Network Interface Modules for PC/XT/AT (ISA) Bus Computers Description The PCX series of ARCNET network interface modules (NIMs) links PC/XT/AT (ISA) compatible computers with the ARCNET local area network. ARCNET is classified as a token-bus LAN operating at 2.5 Mbps while supporting 255 nodes. Interfacing ARCNET to a host computer usually requires a NIM which plugs into the host computer’s bus. The PCX incorporates the COM90C65 ARCNET controller chip and the module is compatible with all of the popular network operating systems such as Novell’s NetWare, Microsoft’s Windows for Workgroups and QNX Software Systems’ QNX version 4.2 or greater. Jumpers are used to set the memory and I/O base addresses and the interrupt source. Every PCX module has two LEDs on the board for monitoring Benefits network operation and bus access to the module. The PCX also • Interfaces ARCNET with PC/XT/AT has an external DIP switch so that node addresses can be easily (ISA) bus computers reassigned without removing the module. Interrupt lines are • One-third height PC board jumper selectable. • Fully-compatible with Novell’s NetWare, Microsoft’s Windows for Workgroups, Several cabling types are supported by the PCX—the PCX-CXS QNX Software Systems’ QNX and other supports coaxial cable in a star configuration; the PCX-CXB popular network operating systems supports coaxial cable in a bus configuration; the PCX-TPS • Supports coaxial, twisted-pair, or glass supports twisted-pair in a star configuration; the PCX-TPB supports fiber optic cabling twisted-pair in a bus configuration; and the PCX-FOG supports • Supports 16K memory mapping, duplex glass fiber optic cable with either ST or SMA connectors. avoiding memory addressing conflicts • Provides socket for 8K auto boot ROM • Node address switch accessible without removing PCX from computer • CMOS design for low power consumption Applications • Data Acquisition • SCADA • Communication Gateways • Operator Interface • Process Control 1 www.ccontrols.com ® ARCNET Network Interface Modules for PC/XT/AT (ISA) Bus Computers PCX Series Specifications Environmental Memory Base Addressing* Operating temperature: 0°C to +60°C Packet Buffer ROM Storage temperature: –40°C to +85°C C:0000 C:0800 C:1000 C:1800 C:2000 Data Rate 2.5 Mbps C:4000 C:4800 C:5000 C:5800 C:6000 Dimensions 3.9” x 4.3” C:C000 C:C800 C:D000 C:D800 C:E000 (one-third height PC card) D:0000 D:0800 D:1000 D:1800 D:2000 (99mm x 109mm) D:4000 D:4800 D:5000 D:5800 D:6000 Shipping Weight 1 lb. (0.45kg) D:8000 D:8800 D:9000 D:9800 D:A000 Interrupt Lines Supports strapping of D:C000 D:C800 D:D000 D:D800 D:E000 IRQ2/9, 3, 4, 5 or 7 E:0000 E:0800 E:1000 E:1800 E:2000 Compatibility PCX series NIMs are fully compatible with all of *Packet buffer occupies a 2K page and the ROM an 8K page. Contemporary Controls’ ARCNET products and I/O Base Addressing* PC/XT/AT computers. 260 300 290 350 2E0 380 2F0 3E0 * I/O ports occupy 16 bytes Transceiver Specifications Transceiver Description Cable Connectors Cable Length Max Nodes/ Min Max Bus Segment -CXS coaxial star RG-62/u BNC 0 2000ft/610m N/A -CXS coaxial star RG-59/u BNC 0 1500ft/457m N/A 1 -CXB coaxial bus RG-62/u BNC 6ft/2m 1000ft/305m 8 1 -TPB twisted-pair bus IBM type 3 RJ-11, screw 6ft/2m 400ft/122m 8 -TPS twisted-pair star IBM type 3 RJ-11 0 328ft/100m N/A -FOG duplex fiber optic 50/125 SMA or ST 0 3000ft/915m N/A -FOG duplex fiber optic 62.5/125 SMA or ST 0 6000ft/1825m N/A 2 -FOG duplex fiber optic 100/140 SMA or ST 0 9000ft/2740m N/A 1 This represents the minimum distance between any two nodes or between a node and a hub. 2 This minimum can only be achieved by removing a jumper on the transceiver circuitry. Power Requirements Ordering Information Model +5V – 5V1 Model Description PCX-CXS 150mA 15mA PCX-CXS 9065 PC coax star NIM PCX-CXB 150mA 50mA PCX-CXB 9065 PC coax bus NIM PCX-FOG-SMA 220mA N/A PCX-FOG-SMA 9065 PC SMA fiber optic NIM PCX-FOG-ST 220mA N/A PCX-FOG-ST 9065 PC ST fiber optic NIM PCX-TPB 150mA 50mA PCX-TPB 9065 PC twisted-pair bus NIM PCX-TPS 150mA 15mA PCX-TPS 9065 PC twisted-pair star NIM 1 Contact factory regarding operation from –12 volts. TD872200-0DF 2 www.ccontrols.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PCX Series have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers




What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods