CONTEMPORARY CONTROLS EISM5-100T
Features
- 10Base-T/100BASE-TX compliant
- Auto-negotiated data rate, duplex, and flow control
- Full-or half duplex operation
- Industrial temperatures (0C to+ 60C)
Datasheet
Extracted Text
® EISM CTRLink Switch — UL 1604 Compliant Plug-and-Play Functionality Standards Compliant 10BASE-T/100BASE-TX compliant Industrial environment EMC compatible Auto-negotiated data rate, duplex, and UL 508 Listed, Industrial Control Equipment flow control C-UL Listed, CSA 22.2 No. 14-M91, Industrial Full- or half-duplex operation Control Equipment Industrial temperatures (0°C to +60°C) UL 1604 Listed, CSA Standard C22.2 No. 213-M1987, Non-Incentive Electrical Equipment for use in Class I, Division 2, Hazardous Locations (Groups A, B, C, D) Simple Installation CE Mark Miniature size (3.1" H x 3.4" D x 1.6" W; RoHS compliant 79mmx85mmx40mm) Easy DIN-rail installation Input power range is 10–36 VDC or 8–24 VAC, 47–63 Hz. Power is provided through a quick-disconnect terminal strip. Built-in uplink provision Provisions for redundant power connections LEDs for link/activity, data rate, and power April 2009 www.ccontrols.com TD011201-0DH 1 ® EISM CTRLink Switch — UL 1604 Compliant Product Overview The EISM5-100T, miniature 5-port switch, is The EISM5-100T learns the port locations of designed for small space requirements. This device Ethernet devices by reading complete Ethernet brings together the benefits of flexibility and frames and observing source addresses. increased network performance in a cost- The switch then creates and maintains a table effective approach. of source addresses and corresponding port assignments. Throughput is improved by restricting It meets UL 1604 compliance. It qualifies for use traffic to ports involved in a data exchange — allowing in Class 1, Division 2, hazardous locations simultaneous packet transfers. Address table (Groups A, B, C, D). Class 1 hazardous locations aging allows changes to field wiring. Messages to are those where fire or explosion hazards may unknown destinations are flooded to all ports — exist due to the presence of flammable gases, as are broadcast and multicast frames. vapours, or flammable liquids. Link integrity assures a working device is on the This unit is similar in capabilities to its EIS8-100T distant end of a segment. Each port LED glows counterpart. It divides the Ethernet network solid if a link exists, flashes to show activity and into as many as five separate collision domains, shows data rate by colour: green for 100 Mbps terminating the collision domain at each port. and yellow for 10 Mbps. One green power LED The switch functions as a “bridge” between is provided. these various data links to create a larger network diameter than can be achieved with Each unit accepts wide-range, low-voltage AC or repeating hubs. DC power and redundant power can be connected. Each port automatically negotiates data rate, The EISM5-100T mounts on TS-32 or TS-35 DIN- duplex, and flow control. One port has an extra rail for simple installation in control panels. RJ-45 jack for use as an uplink port — eliminating the need for a crossover cable. www.ccontrols.com April 2009 TD011201-0DH 2 ® EISM CTRLink Switch — UL 1604 Compliant Mechanical 2.9” 0.11” 74 mm 2.8 mm ® www.CTRLink.com Input Ratings DC AC Voltage 10-36 8-24 Power 4W 4VA Frequency N/A 47-63Hz INDUSTRIALCONTROL EQUIPMENTFOR HAZARDOUS LOCATIONS 9BA2 4EA4 For Use In Class 2 Circuits 3.3” 84 mm Power Diagrams * * 10Vdc36 + * 10Vdc36 10Vdc36 8Vac24 ~ ~ 8Vac24 ~ ~ * 8Vac24 ~ ~ * * AC Powered AC Powered AC Powered with (grounded secondary) (ungrounded secondary) Battery Backup * * + + + 10Vdc36 10Vdc36 8Vac24 ~ ~ 8Vac24 ~ ~ * * * Connecting either or both chassis connections to earth is DC Powered Redundant DC Powered optional in all applications. www.ccontrols.com April 2009 TD011201-0DH 3 TS-35 DIN-Rail ® EISM CTRLink Switch — UL 1604 Compliant Specifications Electrical DC AC Input voltage 10–36 Volts 8–24 Volts Input power (max) 4 W 4 VA Input frequency N/A 47–63 Hz Environmental Operating temperature 0°C to 60°C Storage temperature –40°C to +85°C Relative humidity 10–95%, noncondensing Protection IP30 Functional Standards IEEE 802.3 Process type Store-and-forward Data rate 10/100 Mbps Signalling 10BASE-T/100BASE-TX Connectors Shielded RJ-45 Segment length 100 m (max) LED indicators Port Link: Yellow — 10 Mbps, Green — 100 Mbps Flashing — Activity Power — Green Flow control Half-duplex (Backpressure) Full-duplex (IEEE 802.3x — PAUSE) Aging 200 to 300 seconds www.ccontrols.com April 2009 TD011201-0DH 4 ® EISM CTRLink Switch — UL 1604 Compliant RJ-45 Pin Assignments 1 MDI-X 10BASE-T/100BASE-TX RJ-45 Usage 1 TD+ 2 TD– 3 RD+ 4 Not Used 5 Not Used 6 RD– 7 Not Used 8 Not Used 1 The EISM implements the crossover function internally allowing straight-through cables to connect to network interface modules. Socket “5X” allows Port 5 to connect to another hub or switch without requiring a crossover cable, in which case the regular Port 5 socket cannot be used. Electromagnetic Compatibility Standard TestMethod Description TestLevels EN 55024 EN 61000-4-2 Electrostatic Discharge 6 kV contact & 8 kV air EN 55024 EN 61000-4-3 Radiated Immunity 10 V/m, 80 MHz to 1 GHz EN 55024 EN 61000-4-4 Fast Transient Burst 1 kV clamp & 2 kV direct EN 55024 EN 61000-4-5 Voltage Surge 1 kV L-L & 2 kV L-Earth EN 55024 EN 61000-4-6 Conducted Immunity 10 Volts (rms) EN 55024 EN 61000-4-11 Voltage Dips & Interruptions 1 Line Cycle, 1 to 5 s @ 100% dip EN 55022 CISPR 22 Radiated Emissions Class A EN 55022 CISPR 22 Conducted Emissions Class B CFR 47, Part 15 ANSI C63.4 Radiated Emissions Class A www.ccontrols.com April 2009 TD011201-0DH 5 ® EISM CTRLink Switch — UL 1604 Compliant Ordering Information Model Description EISM5-100T Five-port 10BASE-T/100BASE-TX miniature switch Accessories Model Description AI-XFMR Wall-mount plug-in transformer, 120 VAC input/24 VAC output (nominal values) AI-XFMR-E Wall-mount plug-in transformer, 230 VAC input/24 VAC output (nominal values) United States China United Kingdom Germany Contemporary Control Contemporary Controls Contemporary Controls Ltd Contemporary Controls GmbH Systems, Inc. (Suzhou) Co. Ltd Sovereign Court Two Fuggerstraße 1 B 2431 Curtiss Street 11 Huoju Road University of Warwick 04158 Leipzig Downers Grove, IL 60515 Science & Technology Park Science Park Germany USA New District, Suzhou Sir William Lyons Road PR China 215009 Coventry, CV4 7EZ United Kingdom Phone: +1 (630) 963-7070 Phone: +86-512-68095866 Phone: +44-24 7641 3786 Phone: +49-341-520359-0 Fax: +44-24 7641 3923 Fax: +1 (630) 963-0109 Fax: +86-512-68093760 Fax: +49-341-520359-16 info@ccontrols.com info@ccontrols.com.cn info@ccontrols.co.uk info@ccontrols.de www.ccontrols.com www.ccontrols.asia www.ccontrols.eu www.ccontrols.eu www.ccontrols.com April 2009 TD011201-0DH 6
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the EISM5-100T have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods