Datasheet MVME5500 Series VME Single-Board Computer Motorola’s highest performance VMEbus single-board computer The MVME5500 is the latest flagship of the Motorola VME product line, enabling even higher levels of performance in a single VMEbus slot. The MVME5500 utilizes the latest MPC7455 processor running at speeds of 1 GHz and beyond, which is ideal for data intensive applications. The MVME5500 provides more than just faster processor performance; it provides balanced performance from the processor, memory, local buses, and I/O subsystems. The powerful Marvell Discovery system controller, with support for a 133 MHz host bus and a 133 MHz SDRAM memory bus, is well matched to the high-speed processor. To match the system I/O to the outstanding processor performance, the MVME5500 provides dual 64-bit, 33/66 MHz PCI buses. Each PCI bus has a PMC site supporting cards running at 33 or 66 MHz. The Universe II VME interface and PMCspan connector are isolated from the PMC sites on a dedicated 33 MHz PCI bus segment, so that both PMC sites are capable of 66 MHz operation. The MVME5500 also offers a Gigabit Ethernet interface, a 10/100BaseTX Ethernet interface, and two serial ports. All of this adds up to a set of well-balanced, high-performance subsystems for unparalleled performance. The MVME5500 series is designed to meet the needs of OEMs servicing the defense and aerospace, industrial automation, and medical imaging market segments. ■MPC7455 processor at speeds of 1 GHz and beyond Customers looking for a "technology refresh" for their application while maintaining ■256KB of on-chip L2 cache and 2MB of L3 cache backward compatibility with their existing VMEbus infrastructure can upgrade to the ■AltiVec coprocessor for high-performance MVME5500 series and take advantage of the enhanced performance features. computational applications COM1 COM2 ■512MB of on-board SDRAM ECC memory and 512MB SDRAM FP I/O Header L3 Cache Mezzanine 2MB additional memory via a memory mezzanine card for Battery Flash 512MB EIA232 EIA232 32MB a total of 1GB of memory (soldered) NVRAM SDRAM 8MB RTC 133 MHz UART UART■40MB Flash memory (32MB soldered and 8MB in (sockets) MPC7455 512MB 1+ GHz sockets) PCI Bridge & 66 MHz PCI Local Bus — A32/D64-bit A32/D64-bit, 133 MHz■Dual PCI buses and dual PMC sites with a bus speed Memory Controller of up to 66 MHz Discovery PCI Gigabit Bridge ■Gigabit Ethernet interface and a 10/100BaseTX 66 MHz PCI Local Bus Ethernet — A32/D64-bit 33 MHz PCI Local Bus Controller — A32/D64-bit Ethernet interface PMCspan ■64-bit PCI expansion mezzanine connector allowing PMC IPMC Connector Ethernet Port 1 Slot 2 Slot 1 up to four more PMCs 10/100/1000BaseTX 10/100BaseTX FP I/O PHY Universe II ■I/O compatibility with MVME51xx family PMC FP I/O PMC FP I/O ■Single VME slot even when fully configured with two PMC modules or one PMC module and an add-on Port 2 P2 P1 10/100BaseTX FP I/O memory mezzanine M VM E55 00 Se ries Deta ils MVME 550 0 SERIES DE TAILS Backward Compatibility The MVME5500 continues the direction that Motorola started with the MVME5100 series of providing a migration path from Motorola’s embedded controllers and single-board computers (SBCs) to a single platform. This migration path enables OEMs to support varying I/O requirements with the same base platform, simplifying part number maintenance, technical expertise requirements, and sparing. The MVME5500 series offers customers a migration path from the MVME2300, MVME2400, MVME2600, MVME2700, and MVME5100 boards to allow them to take advantage of features such as the MPC7455 processor, Gigabit Ethernet, and 33/66 MHz PMC sites. P2 I/O Modes Like the MVME5100 series, the MVME5500 series supports two, jumper-configurable P2 I/O modes: PMC mode and IPMC mode. PMC mode is backward compatible with the MVME2300/MVME2400 and MVME5100 in PMC mode. In PMC mode, 64 pins from PMC Slot 1 and 46 pins from PMC Slot 2 are available on P2 for PMC rear I/O. In IPMC mode, the MVME5500 series supports legacy MVME761 or MVME712M I/O modules (with limited PMC I/O) when an IPMC761 or IPMC712 PMC card is populated in PMC Slot 1. In this configuration, PMC Slot 2 contains some signals that are reserved for extended SCSI. IPMC Modules The IPMC761 and IPMC712 are optional add-on PMC modules that provide backward compatibility with previous generation Motorola products (such as MVME2600, MVME2700, and MVME5100 in IPMC mode) using the MVME761 or MVME712M transition module. IPMC modules provide rear I/O support for the following: • One single-ended Ultra Wide SCSI port • One parallel port • Four serial ports (two or three async and one or two sync/async, depending on module) With this PMC card configuration, one PMC slot is still available, providing support for OEM product customization. Transition Modules MVME761 The MVME761 transition module provides industry-standard connector access to the IEEE 1284 parallel port, a 10BaseT or 100BaseT port via an RJ-45 connector, two DB-9 connectors providing access to the asynchronous serial ports configured as EIA-574 DTE, and two HD-26 connectors providing access to the sync/async serial ports. These serial ports, labeled as Serial 3 and Serial 4 on the faceplate of the MVME761, are individually user-configurable as EIA-232, EIA-530, V.35, or X.21 DCE or DTE via the installation of Motorola serial interface modules (SIMs). A P2 adapter provides interface module signals to the MVME761 transition module. The 3-row P2 adapter can be used for 8-bit SCSI. A 5-row P2 adapter supports 16-bit SCSI and PMC I/O. MVME712M The MVME712M transition module provides industry-standard connector access to the Centronics parallel port, a narrow SCSI port, and four DB-25 connectors providing access to the asynchronous/synchronous serial ports jumper configurable as EIA-232 DCE or DTE. A P2 adapter provides interface signals to the MVME712M transition module. The 3-row P2 adapter can be used for 8-bit SCSI. To gain access to the additional user-definable I/O pins provided via the 5-row VME64 extension connector, a special P2 adapter board is available. This adapter panel replaces the traditional 3-row P2 adapter and extends its capability by providing access to the PMC I/O pins. 2 MVME5500 Series Software Support Firmware Monitor Firmware must fulfill the traditional functions of power-on self-test (POST), initialization, and operating system booting. Motorola’s innovative firmware (known as MotLoad) that is resident on the MVME5500 exceeds these requirements with expanded features such as interrupt driven I/O, more comprehensive power-up tests, and extensive diagnostics with new scripting capability. And of course, MotLoad provides a debugger interface similar to the time proven "BUG" interface on previous VMEbus boards from Motorola. Operating Systems and Kernels WindRiver Systems VxWorks and MontaVista Linux Professional Edition will be available for the MVME5500. Libraries VSI/Pro VSIPL libraries from MPI Software Technology will be available on the MVME5500. Built-In Test Software Motorola Built-In Test (MBIT) software is available for use on the MVME5500 series. MBIT is an off-the-shelf software infrastructure designed to verify correct operation of Motorola hardware and enable the incorporation of system-level diagnostics. Two versions of MBIT, board-level and system-level, are available and are compatible with WindRiver Systems Tornado 2.1. The board-level MBIT is a comprehensive diagnostic software package designed to verify the performance of board- mounted logic devices. All tests can execute at boot-up, while selected tests can run continuously in the background of user applications. An application programming interface (API) is included to provide access to test results and to modify and control the operation of device tests. A comprehensive user’s manual is available. The system-level MBIT includes all functionality and API function calls of the board-level version and enables system-wide testing. The system-level MBIT provides a framework and additional API function calls to support the inclusion of software designed to test custom hardware and/or system components. A comprehensive user’s manual with software development guidelines is available. Sp ec ific atio ns SPECIFICATIONS Processor Flash Memory Microprocessor: MPC7455 Type: EEPROM, on-board programmable Clock Frequency: 1 GHz Capacity: 8MB via two 56-pin TSOP sockets; 32MB soldered Flash On-chip L1 Cache (I/D): 32KB/32KB Write Protection: 32MB of surface-mount Flash is write- On-chip L2 Cache (I/D): 256KB/256KB protectable via jumper L3 Cache: 2MB NVRAM System Controller Capacity: 32KB (4KB available for users) Marvell Discovery GT-64260A Cell Storage Life: 50 years at 55° C Main Memory Cell Capacity Life: 5 years at 100% duty cycle, 25° C Removable Battery: Yes Type: PC133 ECC SDRAM Speed: 133 MHz Counters/Timers Capacity: 512MB on-board, expandable to 1GB with add-on memory mezzanine card. If a PMC TOD Clock Device: M48T37V module is plugged into PMC Slot 1, the Real-Time Eight, 32-bit programmable memory mezzanine card cannot be used Timers/Counters: because the PMC module covers the Watchdog Timer: Time-out generates reset memory mezzanine connector. Configurations: 512MB in two banks MVME5500 Series 3 VMEbus Interface: ANSI/VITA 1-1994 VME64 (IEEE STD Dual IEEE P1386.1 PCI Mezzanine Card Slots 1014) Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors Controller: Tundra Universe II PCI Bus Clock: 33/66 MHz DTB Master: A16-A32; D08-D64, SCT, BLT Signaling: 3.3V or 5V, configurable with keying pin DTB Slave: A24-A32; D08-D64, BLT, UAT Power: +3.3V, +5V, ±12V Arbiter: RR/PRI Module Types: Two single-wide or one double-wide, front Interrupt IRQ 1-7/Any one of seven IRQs panel or P2 I/O, PMC and PrPMC support Handler/Generator: Note: If a PMC module is plugged in PMC Slot 1, the memory System Controller: Yes, jumperable or auto detect mezzanine card cannot be used because the PMC module covers the Location Monitor: Two, LMA32 memory mezzanine connector. Ethernet Interfaces PCI Expansion Connector Port 1 Address/Data: A32/D32/D64 Controller: Intel 82544EI Gigabit Ethernet controller PCI Bus Clock: 33 MHz Interface Speed: 10/100/1000Mb/s Signaling: 5V Connector: Routed to front panel RJ-45 Power: +3.3V, +5V, ±12V Port 2 Connector: 114-pin connector located on MVME5500 Controller: Controller integrated into GT-64260A planar, same location as on MVME5100 system controller planar Interface Speed: 10/100Mb/s Power Requirements Connector: Routed to front panel RJ-45 or optionally routed to P2, RJ-45 on MVME761 (Not including power required by PMC or IMPC modules) +5V ± 5% +12V ± 10% –12V ± 10% Asynchronous Serial Ports MVME5500: TBD TBD TBD MVME5500 TBD TBD TBD Controller: Two TL16C550C UARTs with MVME761: Number of Ports: Two, 16550 compatible Async Baud Rate, bps 38.4K EIA-232, 115Kb/s raw Board Size max.: Connector: Routed to front panel RJ-45; one on planar Height: 233.4 mm (9.2 in.) for development use Depth: 160.0 mm (6.3 in.) Front Panel Height: 261.8 mm (10.3 in.) Width: 19.8 mm (0.8 in.) Max. Component 14.8 mm (0.58 in.) Height: IPMC Modules PMC Interface Synchronous Serial Ports Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 Controller: 85230/8536 connectors Number of Ports: Two (IPMC761); one (IPMC712) PCI Bus Clock: 33 MHz Configuration: IPMC761: TTL to P2 (both ports), SIM Signaling: 5V configurable on MVME761; IPMC712: EIA-232 to P2 Module Type: Basic single-wide; P2 I/O Baud Rate, bps max.: 2.5M sync, 38.4K async SCSI Bus Oscillator Clock Rate 10 MHz/5 MHz (PCLK): Controller: Symbios 53C895A Asynchronous Serial Ports PCI Local Bus DMA: Yes, with PCI local bus burst Asynchronous (8-bit 5.0MB/s Controller: 16C550 UART; 85230/8536 mode): Number of Ports: Two (IPMC761); three (IPMC712) Ultra SCSI: 20.0MB/s (8-bit mode), 40.0MB/s (16-bit Configuration: mode) EIA-574 DTE (IPMC761); EIA-232 (IPMC712) Note: 16-bit SCSI operation precludes the use of some PMC Slot 2 signals. Async Baud Rate, bps 38.4K EIA-232, 115Kb/s raw max.: 4 MVME5500 Series Parallel Port Power Requirements (Additional power load placed on MVME5500 with IPMC installed) Controller: PC97307 IPMC761 IPMC712 Configuration: 8-bit bi-directional, full IEEE 1284 support; +5V: 0.5 A max. 0.5 A max. Centronics compatible (minus EPP and ECP on MVME712M) +3.3V: 0.75 A max. 0.75 A max. Modes: Master only Transition Modules I/O Connectors MVME761 MVME712M Asynchronous Serial Ports: Two, DB-9 labeled as COM1 and COM2 Three, DB-25 labeled as Serial 1, Serial 2, and Serial 3 Synchronous Serial Ports: Two HD-26 labeled as Serial 3 and Serial 4 (user- One, DB-25 labeled as Serial 4 configurable via installation of SIMs), Two 60-pin connectors on MVME761 planar for installation of two SIMs Parallel Port: HD-36, Centronics compatible D-36, Centronics compatible Ethernet: 10BaseT or 100BaseT, RJ-45 NA SCSI: 8- or 16-bit, 50- or 68-pin connector via P2 adapter 8-bit, standard SCSI D-50 Board Size Height: 233.4 mm (9.2 in.) Depth: 80.0 mm (3.1 in.) Front Panel Height: 261.8 mm (10.3 in.) Front Panel Width: MVME761: 19.8 mm (0.8 in.) MVME712M: 39.6 mm (1.6 in.) All Modules Environmental Electromagnetic Compatibility (EMC) Intended for use in systems meeting the following regulations: Operating Non-operating U.S.: FCC Part 15, Subpart B, Class A (non-residential) Temperature: 0° C to +55° C –40° C to +85° C Canada: ICES-003, Class A (non-residential) (inlet air temp. w/forced air cooling) Motorola Computer Group board products are tested in a representative system to the following standards, results pending for Vibration: 2 Gs RMS, 1 G sinusoidal, configurations with IPMC712: 20-2000 Hz random 5–100 Hz CE Mark per European EMC Directive 89/336/EEC with 2 axes Amendments; Emissions: EN55022 Class A; Immunity: EN55024 Safety All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. MVME5500 Series 5 Ord erin g In formatio n ORDERING INFORMATION Part Number Description MVME5500-0161 1 GHz MPC7455 processor, 512MB SDRAM, Scanbe handles MVME5500-0163 1 GHz MPC7455 processor, 512MB SDRAM, IEEE handles Memory RAM5500-007 512MB memory mezzanine expansion card Once released, documentation is available for online viewing and ordering at http://www.motorola.com/computer/literature General availability of the MVME5500 series is scheduled for March 2003. Motorola Computer Group NORTH AMERICA: Tempe, AZ 800-759-1107 or 602-438-5720 ASIA: Shanghai, China +86 21 5292 5693 Regional Offices EUROPE: Loughborough, UK +44 1509 634300 PACIFIC RIM: Tokyo, Japan +81 3 5424 3101 EAST MEDITERRANEAN: Tel Aviv, Israel +972 3 568 4388 ASIA/PACIFIC: Hong Kong +852 2966 3210 www.motorola.com/computer MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. © Motorola Inc. 2002 This datasheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola's licensee, licensee's transferees, and licensee's customers and users. Availability of some of the products and services described herein may be restricted in some locations. M5500-D1 9/02