THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT DA T A SHEET CRYSTAL CONTROLLED OSCILLATORS SURFACE MOUNT 5.0V OCXO with SINEWAVE OUTPUT ABSOLUTE MAXIMUM RATINGS TABLE 1.0 OFC5DJ3BS PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -40 - 85 °C Supply Voltage (Vcc) -0.5 - 7 Vdc DESCRIPTION OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE The Connor-Winfield 1 Center Frequency (Fo) 10 - 20 MHz OFC5DJ3BS is a 5V Surface Standard Frequencies Available: 10 MHZ, 13 MHz, 15 MHZ, or 20 MHz Mount Oven Controlled Crystal Frequency Calibration -0.2 0.2 ppm 2 Oscillator (OCXO) with a Frequency vs. Temperature Stability -20 - 20 ppb 3 Sinewave output. The Frequency vs. Voltage Stability (+/-5%) -2 - 2 ppb Frequency vs. Load Stability (+/-5%) -2 - 2 ppb OFC5J3BS is designed for Aging: Daily -1 - 1 ppb/day 4 Wireless applications requiring Aging: First Year -50 - 50 ppb low Phase Noise and tight Aging: Long Term (20 Years) -250 - 250 ppb frequency stability. Total Frequency Tolerance (20 years) -500 - 500 ppb 5 Allen Variance: 1 second, 100 average. - 5.00E-11 - RMS Operating Temperature Range -20 - 70 °C Supply Voltage (Vcc) 4.75 5.00 5.25 Vdc Power Consumption: Turn On - - 3.0 W 6 Power Consumption: Steady-State - - 1. 5 W 6 Start-Up Time 500 mS 7 FEATURES Warm Up -100 - 100 ppb 8 SINEWAVE OUTPUT CHARACTERISTICS TABLE 3.0 FIXED FREQUENCY OCXO PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD 45 50 55 Ohms FREQUENCY STABILITY: ±20ppb Output Power 0 3 - dBm Spurious Output -80 dBc TEMERATURE RANGE: -20 to 70°C SSB Phase Noise at 1Hz offset - - -90 dBc/Hz SSB Phase Noise at 10Hz offset - - -110 dBc/Hz 5.0V OPERATION SSB Phase Noise at 100Hz offset - - -135 dBc/Hz SSB Phase Noise at 1KHz offset - - -150 dBc/Hz SINEWAVE OUTPUT SSB Phase Noise at 10KHz offset - - -155 dBc/Hz LOW PHASE NOISE RESTABILIZATION TIME TABLE 4.0 Off Time Restabilization Time NOTE SURFACE MOUNT PACKAGE < 1 Hour < 2 Hours 9 < 6 Hours < 12 Hours 9 TAPE AND REEL PACKAGING < 24 Hours < 48 Hours 9 1 to 16 Days 48 Hours + ¼ Off Time 9 > 16 Days < 6 Days 9 PACKAGE CHARACTERISTICS TABLE 5.0 Package Non-hermetic package consisting of an FR4 substrate with grounded metal cover. ORDERING INFORMATION ENVIRONMNETAL CHARACTERISTICS TABLE 6.0 Shock 100G’s, 6mS, halfsine per MIL-STD-202F, Method 213B, Test Condition C Vibration 0.06” D.A. or 10G peak 10 to 500 Hz, per MIL-STD-202F, Method 204D, Test condition A OFC5DJ3BS - 10.00MHz PROCESS RECOMMENDATIONS TABLE 7.0 Solder Reflow The component solder used internal to this device has a m elting point of OCXO CENTER 221°C. The peak temperature inside the device should be less than or equal SERIES FREQUENCY to 220°C for a maximum of 10 seconds Wash Ultrasonic cleaning is not recommended. Specifications subject to change without notice. Cx067 2/11/04 1 2 00 Copyright 2001 Connor-Winfield all rights reserved. DATA SHEET #: PAGE OF REV: DATE: a CW 0107 OFC5DJ3BS 10.00M THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT DA T A SHEET CRYSTAL CONTROLLED OSCILLATORS TABLE 8.0 Pin Function Notes: 1 N/C 1) Labels will include the calibration frequency at the time of ship. 2 Ground 2) Initial calibration @ 25°C at the time of shipment. 6 N/C 3) Overall frequency stability referenced to measurement at 25°C. 4) After ten days of continuous operation. 7 Ground 5) Inclusive of calibration, frequency stability vs. change in temperature, supply voltage change, load 8 Vcc change, shock and vibration, 20 years aging. 9 Vcc 6) Vcc = 5.0Vdc. 10 Ground 7) From Vcc=90% of final value. No more than 16 transitions at start-up before oscillator has 11 Ground started. 12 N/C 8) Measured @ 0°C, within 5 minutes, referenced one hour after turn-on. 9) For a given off time, the time required to meet daily aging and short-term stability. 13 Ground 14 Output 15 Ground 16 N/C Dimensional Tolerance: ±.005 (.127mm) SUGGESTED PAD LAYOUT 12.7 .270 (6.85mm) .260 (6.60mm) .260 (6.60mm) .270 (6.85mm) .260 .360 (6.60mm) (9.14mm) KEEP OUT AREAS (4 PLACES) Vcc Vcc GND 10 GND 7 GND 11 NC 6 12 NC 13 GND 14 OUT 15 GND GND 2 NC NC 50 Ohm Specifications subject to change without notice. Cx067 00 2/11/04 2 2 Copyright 2001 Connor-Winfield all rights reserved. DATA SHEET #: PAGE OF REV: DATE: a CW DATE CODE ASOV5S3E 10.00M