BNC.4 11/27/01 5:29 PM Page 67 BNC COAXIAL CONNECTORS The Connex BNC connectors are made to a high quality level. Medium size coaxial connectors with bayonet lock. 50 ohm impedance for applications up to 4 GHz and 75 ohm impedance up to 2 GHz. 75 OHM SERIES Within the internationally standardized BNC mating face dimensions, a perfect 75 ohm characteristic impedance cannot be realized. However, at frequencies up to 1000 MHz, the small impedance deviation is negligible for practical applications. Connex true 75 ohm connectors with a typical VSWR reading of 1.06:1 at 2000 MHz are identified by an asterisk following the part number. All 75 ohm BNC connectors and 50 ohm BNC connectors are intermateable without restrictions. Note: Silverplated bodies are available by adding “S” to end of part number. Nexcote (white bronze) plating with no nickel under body or center contact is available by adding “NEX” to end of part number. ELECTRICAL SPECIFICATIONS Impedance 50 ohm 75 ohm Frequency Range 0–4 GHz 0–1 GHz Working Voltage 500 Volts rms. 500 Volts rms. Dielectric Withstanding Voltage 1500 Volts rms. 1500 Volts rms. VSWR 1.3 max. 0–4 GHz 1.05+0.1f(GHz) DC to 1 GHz Contact Resistance Center contact 1.5 milliohm Center contact 1.5 milliohm Outer contact 1.0 milliohm Outer contact 1.0 milliohm Insulation Resistance 5000 megohms (min) 5000 megohms (min) MATERIAL SPECIFICATIONS PARTS NAME MATERIAL FINISH Center Male Brass Gold or Silver plated Contact Female Phosphor Bronze (nominal) or Gold or Silver plated Beryllium Copper Metal parts Brass Nickel* Insulators Teflon, Delrin, PBT polyester None Clamp gaskets Silicone rubber, Synthetic rubber None Crimp ferrule Annealed copper Nickel* 67 BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 68 BNC COAXIAL CONNECTORS INTERFACE MATING DIMENSIONS PLUG Letter Millimeters [Inches] Minimum Maximum A 9.78 [.385] 9.91 [.390] B FLARED TO MEET GOOD ELECTRICAL CONTACT C 4.83 [.190] – D 1.32 [.052] 1.37 [.054] E 5.33 [.210] 5.84 [.230] F 0.15 [.006] 0.46 [.018] L 0.08 [.003] 1.02 [.040] N – 0.64 [.025] P 5.28 [.208] 5.79 [.228] Q 1.98 [.078] – R 2.06 [.081] 2.21 [.087] JACK Letter Millimeters [Inches] Minimum Maximum A 10.97 [.432] 11.07 [.436] B 9.60 [.378] 9.70 [.382] C 8.31 [.327] 8.46 [.333] D 8.10 [.319] 8.15 [.321] E – 4.72 [.186] F 5.18 [.204] 5.28 [.208] G 8.31 [.327] 8.51 [.335] H 1.91 [.075] 2.06 [.081] I 4.78 [.188] 5.28 [.208] J 4.72 [.186] 5.23 [.206] K – 0.15 [.006] L 4.95 [.195] – M 2.06 [.081] 2.21 [.087] N 8.79 [.346] 9.04 [.356] P – 6.50 [.256] R 0.38 [.015] 0.76 [.030] S 10.52 [.414] – NOTE 1: I.D. TO MEET VSWR AND CONTACT RESISTANCE WHEN MATED WITH 1.32/1.37 MM DIA. PIN. 68 BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 69 BNC COAXIAL CONNECTORS CABLE GROUP LEGEND All connector bodies, unless otherwise 01 58/ 58A/ 58C/ 141/ 303/ 06A 179/ U DOUBLE BRAIDED 09 B8227/ 89207 noted, are nickel plated. Center contacts ™ LMR195 / B7806A 07 8/ 8A/ 213/ 393 10 .141 SEMI-RIGID/ 402/U are 3µ" gold plated. Insulators are Delrin, 01A 55/ 142/ 223/ 400 07A 214 11 .085 SEMI-RIGID/ 405/U ™ ™ unless otherwise noted. 01B LMR200 / B7807A 07B 8X/ LMR240 / B7808A 12 .250 SEMI-RIGID ™ 02 58 PLENUM/THINNET/ 07C B9913/ LMR400 / 13 .047 SEMI-RIGID/ B1674A Silver plating and Teflon insulators are 122U/ B88240/ B89907 B7810A/ B8214 14 178/ 196 available on virtually all BNC connectors. 03 59/ 62/ 140/ 210 07D B89913 15 B8281/ B9231/ B9141 Please contact Connex for samples and 03A 59/ U-20AWG 07E 11 15A B88281 04 59/ U PLENUM 07F 11/ U-14AWG/ B8213/ 16 180/ 195/ 122/ B8218/ quotes. 04A 59/ U PLENUM-20AWG B9292/ B7731/ B1859A B1865A/ B1855 ™ All dimensions in millimeters and [inches]. 05 174/ 188A/ 316/ B7805A 08 6/ 143/ 212 17 LMR6OO 05A 316/ U DOUBLE BRAIDED 08A B1694A/ B9248 18 AT&T734A/ B1505A 06 179/ 187/ B9221 08B 6 PLENUM/ B1695A 19 AT&T735A/ B735A1 PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE STRAIGHT CRIMP PLUG — SINGLE CRIMP Cable Crimp P.N. Group Finish Insulation Impedance Tool Diecast shell 112108 01 Nickel Delrin 50 E 112110 03 Nickel Delrin 50 E 112112 02 Nickel Delrin 50 E 112114 04 Nickel Delrin 50 E Remark: Only for Solid Center Conductor Cable STRAIGHT CRIMP PLUG — CAPTIVE CONTACT — STANDARD CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112116 01 Nickel Delrin 50 A 112514 01A Nickel Delrin 50 A 112597 01B Nickel Teflon 50 A 112118 03 Nickel Delrin 50 A 112119 03 Nickel Delrin 75 A 112952* 03 Nickel Teflon 75 A 112507 03A Nickel Delrin 75 A 112956* 03A Nickel Teflon 75 A 112650 — Nickel Teflon 75 A COMMSCOPE F59 HEC-2/B1186A CABLE 112562 07 Nickel Teflon 50 D 112589 07A Nickel Teflon 50 D 112533 07B Nickel Delrin 50 A 112563 07C Nickel Teflon 50 L 112627 07D Nickel Teflon 50 L 112576 07E Nickel Teflon 75 D 112669 07E Nickel Teflon 50 D 112606 07F Nickel Teflon 75 D 112508 08 Nickel Delrin 75 E 112565 08A Nickel Delrin 75 E 112957* 08A Nickel Teflon 75 H 112519 08B Nickel Delrin 75 E 112958* 08B Nickel Teflon 75 E 112509 15 Nickel Delrin 75 E 112953* 15 Nickel Teflon 75 E 112625 15A Nickel Delrin 75 E 112951* 18 Nickel Teflon 75 A 112950* 19 Nickel Teflon 75 B ™ 112700 LMR300 Nickel Teflon 50 D/E Diecast Shell 112120 01 Nickel Delrin 50 A 112122 03 Nickel Delrin 50 A 112123 03 Nickel Delrin 75 A *Center contact .053" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 69 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 70 PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 STRAIGHT CRIMP PLUG — CAPTIVE CONTACT — PLENUM CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112124 02 Nickel Delrin 50 A 112127 04 Nickel Delrin 75 A 112544 04A Nickel Delrin 75 A Diecast Shell 112128 02 Nickel Delrin 50 A STRAIGHT CRIMP PLUG — CAPTIVE CONTACT — MINIATURE CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112132 05 Nickel Delrin 50 B 112512 05A Nickel Delrin 50 B 112133 06 Nickel Delrin 75 B 112644 06A Nickel Delrin 75 B 112516 14 Nickel Delrin 50 B 112521 16 Nickel Delrin 75 B 112955* 16 Nickel Teflon 75 B 112975* 04A Nickel Teflon 75 B Diecast Shell 112134 05 Nickel Delrin 50 B 112135 06 Nickel Delrin 75 B Remark: With teflon sleeve/Hex crimp size.178" *Center contact .053" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp STRAIGHT SOLDER PLUG — SEMI-RIGID CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool 112551 10 Nickel/Gold Teflon 50 N/A 112520 10 Nickel/Gold Teflon 75 N/A 112552 11 Nickel/Gold Teflon 50 N/A 112551 112552 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 70 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 71 PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 STRAIGHT CRIMP PLUG — PIN-IN-PIN — MINIATURE CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112136 05 Nickel Delrin 50 B 112137 06 Nickel Delrin 75 B Diecast Shell 112138 05 Nickel Delrin 50 B 112139 06 Nickel Delrin 75 B Remark: Hex. crimp size .128" 4–Way Indent Crimp Ferrule Crimp Tool Crimped Size .128" Tool No. 47001 Tool No. 47-10150 STRAIGHT CRIMP PLUG — MINIATURE CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112140 06 Nickel TPX 75 B Diecast Shell 112142 06 Nickel TPX 75 B Remark: TPX Insulator/75 ohm AVAILABLE ONLY For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 71 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 72 RIGHT ANGLE PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 RIGHT ANGLE CRIMP/SOLDER PLUG — STANDARD CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112162 01 Nickel Delrin 50 A 112526 01A Nickel Delrin 50 A 112599 01B Nickel Teflon 50 A 112164 03 Nickel Delrin 50 A 112165 03 Nickel Delrin 75 A 112960* 03 Nickel Teflon 75 A 112467 01 Nickel Teflon 50 A 112470 03 Nickel Teflon 75 A 112594 07 Nickel Teflon 50 D 112595 07A Nickel Teflon 50 D 112601 07B Nickel Delrin 50 A 112596 07C Nickel Delrin 50 D 112961* 18 Nickel Teflon 75 A 112962* 19 Nickel Teflon 75 B Diecast Shell 112166 01 Nickel Delrin 50 A 112168 03 Nickel Delrin 50 A 112169 03 Nickel Delrin 75 A Remark: Cable Center Conductor Solder to pin directly *Center contact .053" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp RIGHT ANGLE CRIMP/SOLDER PLUG — PLENUM CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112170 02 Nickel Delrin 50 A 112173 04 Nickel Delrin 75 A Diecast Shell 112174 02 Nickel Delrin 50 A 112177 04 Nickel Delrin 75 A Remark: Cable Center Conductor Solder to pin directly RIGHT ANGLE CRIMP/SOLDER PLUG — MINIATURE CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112178 05 Nickel Delrin 50 B 112528 05A Nickel Delrin 50 B 112179 06 Nickel Delrin 75 B 112646 06A Nickel Delrin 75 B 112588 16 Nickel Delrin 75 B Remark: Cable Center Conductor Solder to pin directly For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 72 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 73 RIGHT ANGLE PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 RIGHT ANGLE SOLDER PLUG — SEMI-RIGID CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool 112617 10 Nickel/Gold Teflon 50 N/A 112614 11 Nickel/Gold Teflon 50 N/A RIGHT ANGLE CRIMP/CRIMP PLUG — STANDARD CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112182 01 Nickel Delrin 50 A 112184 03 Nickel Delrin 50 A 112185 03 Nickel Delrin 75 A 112540 08 Nickel Teflon 75 E 112539 15 Nickel Teflon 75 A Diecast Shell 112186 01 Nickel Delrin 50 A 112189 03 Nickel Delrin 75 A Remark: Crimp/Crimp Type RIGHT ANGLE CRIMP/CRIMP PLUG — PLENUM CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112190 02 Nickel Delrin 50 A 112193 04 Nickel Delrin 75 A Diecast Shell 112194 02 Nickel Delrin 50 A 112197 04 Nickel Delrin 75 A Remark: Crimp/Crimp Type RIGHT ANGLE CRIMP/CRIMP PLUG — MINIATURE CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112198 05 Nickel Delrin 50 B 112199 06 Nickel Delrin 75 B Diecast Shell 112200 05 Nickel Delrin 50 B 112201 06 Nickel Delrin 75 B Remark: With teflon sleeve Hex. crimp size .178" Crimp/Crimp Type For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 73 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 74 JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 STRAIGHT CRIMP JACK — STANDARD CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Captured 112144 01 Nickel Teflon 50 A 112148 01 Nickel Delrin 50 A 112513 01A Nickel Delrin 50 A 112598 01B Nickel Teflon 50 A 112146 03 Nickel Teflon 50 A 112147 03 Nickel Teflon 75 A 112150 03 Nickel Delrin 50 A 112649 03A Nickel Teflon 75 A 112605 07B Nickel Teflon 50 A 112603 07C Nickel Teflon 50 D 112965* 08A Nickel Teflon 75 H 112966* 08B Nickel Teflon 75 E 112628 15 Nickel Teflon 75 E 112973* 18 Nickel Teflon 75 A 112974* 19 Nickel Teflon 75 B *Center contact .052" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp STRAIGHT CRIMP JACK — PLENUM CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Teflon/Captured 112152 02 Nickel Teflon 50 A 112155 04 Nickel Teflon 75 A 112645 04A Nickel Teflon 75 A STRAIGHT CRIMP JACK — MINIATURE AND SEMI-RIGID CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool 112160 05 Nickel Delrin 50 B 112529 05A Nickel Teflon 50 B 112161 06 Nickel Delrin 75 B 112647 06A Nickel Delrin 75 B 112618 10 Nickel/Gold Teflon 50 N/A 112615 11 Nickel/Gold Teflon 50 N/A 112631 14 Nickel Delrin 50 B 112559 16 Nickel Delrin 75 B Remark: With teflon sleeve, Hex crimp size .178" BULKHEAD CRIMP JACK — SNAP-IN PANEL Cable Crimp P.N. Group Finish Insulation Impedance Tool 112636 05 Nickel Teflon 50 B For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 74 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 75 BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BULKHEAD CRIMP JACK — STANDARD CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Teflon/Captured 112202 01 Nickel Teflon 50 A 112505 01A Nickel Teflon 50 A 112600 01B Nickel Teflon 50 A 112204 03 Nickel Teflon 50 A 112205 03 Nickel Teflon 75 A 112630 03A Nickel Teflon 75 A 112602 07B Nickel Teflon 50 A 112604 07C Nickel Teflon 50 L 112662 08A Nickel Teflon 75 E 112982• 08A Nickel Teflon 75 E 112593 08B Nickel Teflon 50 E 112629 15 Nickel Teflon 75 E Delrin/Non Captured 112206 01 Nickel Delrin 50 A 112208 03 Nickel Delrin 50 A 112209 03 Nickel Delrin 75 A Remark: 3.5 [.138] Max. panel thickness *Center contact .053" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp BULKHEAD CRIMP JACK — STANDARD CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Teflon/Captured 112210 01 Nickel Teflon 50 A 112213 03 Nickel Teflon 75 A Remark: 6.5 [.256] Max. panel thickness BULKHEAD CRIMP JACK — PLENUM CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Teflon/Captured 112218 02 Nickel Teflon 50 A 112221 04 Nickel Teflon 75 A Remark: 3.5 [.138] Max. panel thickness For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 75 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 76 BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BULKHEAD CRIMP JACK — PLENUM CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Teflon/Captured 112226 02 Nickel Teflon 50 A 112229 04 Nickel Teflon 75 A Remark: 6.5 [.256] Max. panel thickness BULKHEAD CRIMP JACK — MINIATURE CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool 112234 05 Nickel Delrin 50 B 112517 05A Nickel Delrin 50 B 112635 05A Nickel Teflon 50 C FRONT MOUNT 112235 06 Nickel Delrin 75 B 112654 06 Nickel Teflon 75 B FRONT MOUNT 112648 06A Nickel Delrin 75 B 112522 14 Nickel Delrin 50 B 112568 16 Nickel Teflon 75 B 112970* 18 Nickel Teflon 75 A 112969* 19 Nickel Teflon 75 B *Center contact .052" diameter, 30µ" Au, true 75 ohm. Use .044 Hex. crimp or 12-indent crimp. 112587, 112634 112587 05 Nickel Teflon 50 B FRONT MOUNT 112634 05A Nickel Teflon 50 C FRONT MOUNT Remark: With teflon sleeve, Hex. crimp size .178", 3.5 [.138] Max. panel thickness BULKHEAD SOLDER JACK — SEMI-RIGID CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool 112581 10 Nickel/Gold Teflon 50 N/A 112580 11 Nickel/Gold Teflon 50 N/A 112609 11 Nickel/Gold Teflon 50 N/A FRONT MOUNT 112632 11 Nickel/Gold Teflon 75 N/A FRONT MOUNT For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 76 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 77 BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BULKHEAD ISOLATED CRIMP JACK — STANDARD CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Teflon/Captured 112236 01 Nickel Teflon 50 A 112652 01A Nickel Teflon 50 A 112238 03 Nickel Teflon 50 A 112239 03 Nickel Teflon 75 A Remark: 6.0 [.236] Max. panel thickness BULKHEAD ISOLATED CRIMP JACK — PLENUM CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool 112244 02 Nickel Teflon 50 A 112247 04 Nickel Teflon 75 A Remark: 6.0 [.236] Max. panel thickness BULKHEAD ISOLATED CRIMP JACK — MINIATURE CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool 112252 05 Nickel Teflon 50 B 112253 06 Nickel Teflon 75 B Remark: 6.0 [.236] Max. panel thickness For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 77 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 78 PANEL JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE/RECEPTACLE For Cable Group Legend, see page 69 PANEL CRIMP JACK — STANDARD CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Teflon/Captured 112272 01 Nickel Teflon 50 A 112527 01A Nickel Delrin 50 A 112274 03 Nickel Teflon 50 A 112275 03 Nickel Teflon 75 A Remark: 5.0 [.197] Max. panel thickness PANEL CRIMP JACK — PLENUM CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool Teflon/Captured 112280 02 Nickel Teflon 50 A 112283 04 Nickel Teflon 75 A Remark: 5.0 [.197] Max. panel thickness PANEL CRIMP JACK — MINIATURE AND SEMI-RIGID CABLE Cable Crimp P.N. Group Finish Insulation Impedance Tool 112288 05 Nickel Delrin 50 B 112530 05A Nickel Delrin 50 B 112289 06 Nickel Delrin 75 B 112619 10 Nickel/Gold Teflon 50 N/A 112616 11 Nickel/Gold Teflon 50 N/A Remark: 5.0 [.197] Max. panel thickness For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 78 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 79 CLAMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 STRAIGHT CLAMP PLUG — CAPTIVE CONTACT Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass shell 112332 01 Nickel Delrin 50 N/A 112334 03 Nickel Delrin 50 N/A 112335 03 Nickel Delrin 75 N/A 112531 07 Nickel Teflon 50 N/A 112558 07E Nickel Teflon 75 N/A 112657 07F Nickel Teflon 75 N/A Remark: Barrel O.D. = 12.5 mm STRAIGHT CLAMP PLUG — CAPTIVE CONTACT Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112348 01 Nickel Delrin 50 N/A 112350 03 Nickel Delrin 50 N/A 112351 03 Nickel Delrin 75 N/A 112477 06 Nickel Teflon 75 N/A Diecast Shell 112352 01 Nickel Delrin 50 N/A 112354 03 Nickel Delrin 50 N/A Remark: UG-88/U, UG-260/U RIGHT ANGLE CLAMP PLUG Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112356 01 Nickel Delrin 50 N/A 112358 03 Nickel Delrin 50 N/A 112359 03 Nickel Delrin 75 N/A 112360 02 Nickel Delrin 50 N/A 112362 04 Nickel Delrin 50 N/A 112363 04 Nickel Delrin 75 N/A STRAIGHT CLAMP JACK — CAPTIVE CONTACT Cable Crimp P.N. Group Finish Insulation Impedance Tool 112372 01 Nickel Teflon 50 N/A 112374 03 Nickel Teflon 50 N/A 112375 03 Nickel Teflon 75 N/A 112376 02 Nickel Teflon 50 N/A 112378 04 Nickel Teflon 50 N/A 112379 04 Nickel Teflon 75 N/A 112642 07 Nickel Teflon 50 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 79 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 80 CLAMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BULKHEAD CLAMP JACK — CAPTIVE CONTACT Cable Crimp P.N. Group Finish Insulation Impedance Tool 112577 01 Nickel Teflon 50 N/A 112612 05 Nickel Teflon 50 N/A 112613 06 Nickel Teflon 75 N/A TWIST–ON ATTACHMENTS FOR FLEXIBLE CABLE TWIST–ON PLUG Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112292 01 Nickel Delrin 50 N/A 112294 03 Nickel Delrin 50 N/A 112295 03 Nickel Delrin 75 N/A 112296 02 Nickel Delrin 50 N/A 112298 04 Nickel Delrin 50 N/A 112299 04 Nickel Delrin 75 N/A 112485 08 Nickel Delrin 75 N/A Diecast Shell 112300 01 Nickel Delrin 50 N/A 112302 03 Nickel Delrin 50 N/A 112303 03 Nickel Delrin 75 N/A 112486 08 Nickel Delrin 75 N/A Remark: Only for solid center conductor cable TWIST-ON JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112308 01 Nickel Delrin 50 N/A 112310 03 Nickel Delrin 50 N/A 112312 02 Nickel Delrin 50 N/A 112314 04 Nickel Delrin 50 N/A Remark: Only for solid center conductor cable For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 80 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 81 TWIST–ON ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 RIGHT ANGLE TWIST–ON PLUG Cable Crimp P.N. Group Finish Insulation Impedance Tool Diecast Shell 112324 01 Nickel Delrin 50 N/A 112326 03 Nickel Delrin 50 N/A 112327 03 Nickel Delrin 75 N/A 112328 02 Nickel Delrin 50 N/A 112330 04 Nickel Delrin 50 N/A Remark: Only for solid center conductor cable WEDGE COMPRESSION ATTACHMENTS FOR FLEXIBLE CABLE WEDGE COMPRESSION PLUG Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112380 01 Nickel Delrin 50 N/A 112382 03 Nickel Delrin 50 N/A 112383 03 Nickel Delrin 75 N/A 112384 02 Nickel Delrin 50 N/A 112386 04 Nickel Delrin 50 N/A 112387 04 Nickel Delrin 75 N/A Remark: With wedge pin WEDGE COMPRESSION JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112396 01 Nickel Teflon 50 N/A 112398 03 Nickel Teflon 50 N/A 112399 03 Nickel Teflon 75 N/A 112400 02 Nickel Teflon 50 N/A 112402 04 Nickel Teflon 50 N/A 112403 04 Nickel Teflon 75 N/A Remark: With wedge contact For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 81 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 82 BULKHEAD RECEPTACLE/SOLDER POT TERMINALS For Cable Group Legend, see page 69 BULKHEAD RECEPTACLE PLUG Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112420 N/A Nickel Delrin 50 N/A 112421 N/A Nickel Delrin 75 N/A Remark: 4.5 [.177] Max. panel thickness BULKHEAD RECEPTACLE JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool L1 = 3.2 [.126] Max. panel thickness, L = 26.7 [1.05] 112424 N/A Nickel Delrin 50 N/A 112424T N/A Nickel Teflon 50 N/A 112575 N/A Nickel Delrin 50 N/A DIE CAST BODY 112575-75 N/A Nickel Delrin 75 N/A DIE CAST BODY 112425 N/A Nickel Delrin 75 N/A L1 = 6.5 [.256] Max. panel thickness, L = 30.0 [1.18] 112426 N/A Nickel Delrin 50 N/A 112427 N/A Nickel Delrin 75 N/A L1 = 9.5 [.374] Max. panel thickness, L = 33.0 [1.30] 112428 N/A Nickel Delrin 50 N/A 112429 N/A Nickel Delrin 75 N/A BULKHEAD RECEPTACLE ISOLATED JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112431 N/A Nickel ABS 50 N/A 112432 N/A Nickel ABS 75 N/A Remark: Isolated from ground, 3.2 [.126] Max. panel thickness For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 82 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 83 BULKHEAD RECEPTACLE/SOLDER POT TERMINALS For Cable Group Legend, see page 69 BULKHEAD RECEPTACLE ISOLATED JACK — REAR MOUNT Cable Crimp P.N. Group Finish Insulation Impedance Tool 112624 N/A Nickel Teflon 50 N/A BULKHEAD RECEPTACLE — PRESS FIT Cable Crimp P.N. Group Finish Insulation Impedance Tool 112579 N/A Nickel Teflon 50 N/A BULKHEAD RECEPTACLE — PRESS FIT Cable Crimp P.N. Group Finish Insulation Impedance Tool 112607 N/A Nickel Teflon 50 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 83 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 84 PANEL RECEPTACLES For Cable Group Legend, see page 69 PANEL RECEPTACLE JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112290 N/A Nickel Teflon 50 N/A 112291 N/A Nickel Teflon 75 N/A 112492N/ANickel Teflon 50 N/A FLUSH REAR 112511 N/A Nickel Teflon 50 N/A FLUSH REAR 4-40 SCREWS PANEL RECEPTACLE PLUG Cable Crimp P.N. Group Finish Insulation Impedance Tool 112653 N/A Nickel Teflon 50 A PANEL RECEPTACLE JACK — EXPOSED TFE TYPE Cable Crimp P.N. Group Finish Insulation Impedance Tool 112524N N/A Nickel Teflon 50 N/A 112524S N/A Silver Teflon 50 N/A NOTE: Consult factory for other lengths available PANEL RECEPTACLE — EXPOSED TEFLON — GASKET SEAL Cable Crimp P.N. Group Finish Insulation Impedance Tool 112639 N/A Nickel Teflon 50 N/A Note: Consult factory for other lengths available. For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 84 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 85 PRINTED CIRCUIT BOARD/RECEPTACLES For Cable Group Legend, see page 69 STRAIGHT PCB MOUNT JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112404 N/A Nickel Teflon 50 N/A 112405 N/A Nickel Teflon 75 N/A Mounting Hole Dia. see “TYPE C” page 185 STRAIGHT PCB MOUNT JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112538 N/A Nickel Teflon 50 N/A 112543 N/A Nickel Teflon 75 N/A STRAIGHT PCB MOUNT JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112515 N/A Nickel Teflon 50 N/A 112591 N/A Nickel Teflon 50 N/A WATERPROOF STRAIGHT PCB MOUNT JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112553 N/A Nickel Teflon 50 N/A 112553-10 N/A Nickel Teflon 75 N/A WATERPROOF 112554 N/A Nickel Teflon 75 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 85 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:30 PM Page 86 PRINTED CIRCUIT BOARD/RECEPTACLES For Cable Group Legend, see page 69 STRAIGHT PCB MOUNT JACK — THREE LEGS Cable Crimp P.N. Group Finish Insulation Impedance Tool 112483 N/A Nickel Teflon 50 N/A 3 LEGS STRAIGHT PCB MOUNT JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112586 N/A Nickel Teflon 75 N/A STRAIGHT PCB MOUNT JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112406 N/A Nickel Teflon 50 N/A 112407 N/A Nickel Teflon 75 N/A Mounting Hole Dia. see “TYPE F” page 185 STRAIGHT PCB MOUNT JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112536 N/A Nickel Teflon 50 N/A 112578 N/A Nickel Teflon 75 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 86 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:30 PM Page 87 PRINTED CIRCUIT BOARD/RECEPTACLES For Cable Group Legend, see page 69 STRAIGHT PCB EDGE MOUNT JACK — END LAUNCH Cable Crimp 112608 P.N. Group Finish Insulation Impedance Tool 112608 N/A Nickel Teflon 50 N/A 112622 N/A Nickel Teflon 75 N/A SQUARE FLANGE 112640 112640 N/A Nickel Teflon 50 N/A 112641 N/A Nickel Teflon 75 N/A ROUND FLANGE BULKHEAD VERTICAL PCB RECEPTACLE — END LAUNCH Cable Crimp P.N. Group Finish Insulation Impedance Tool 112633 N/A Nickel Teflon 50 N/A COMMERCIAL STRAIGHT PCB MOUNT JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool White Housing 112408 N/A Nickel Polypropylene 50 N/A 112409 N/A Nickel Polypropylene 75 N/A Black Housing 112410 N/A Nickel Polypropylene 50 N/A 112411 N/A Nickel Polypropylene 75 N/A Remark: Add L to part number for Locking Legs Mounting Hole Dia. see “TYPE G” page 185 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 87 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:30 PM Page 88 PRINTED CIRCUIT BOARD/RECEPTACLES For Cable Group Legend, see page 69 COMMERCIAL STRAIGHT PCB MOUNT JACK — METAL BODY Cable Crimp P.N. Group Finish Insulation Impedance Tool Diecast 112488 N/A Nickel Polypropylene 50 N/A 112495 N/A Nickel Polypropylene 75 N/A Note: Connectors are shipped with lock nut and washer Mounting Hole Dia. see “TYPE G” page 185 COMMERCIAL RIGHT ANGLE PCB MOUNT JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool High Profile, 15.88 [.625] White 112412 N/A Nickel Polypropylene 50 N/A 112413 N/A Nickel Polypropylene 75 N/A High profile, 15.88 [.625] Black 112414 N/A Nickel Polypropylene 50 N/A 112415 N/A Nickel Polypropylene 75 N/A Low Profile, 13.1 [.516] White 112416 N/A Nickel Polypropylene 50 N/A 112417 N/A Nickel Polypropylene 75 N/A Low Profile, 13.1 [.516] Black 112418 N/A Nickel Polypropylene 50 N/A 112419 N/A Nickel Polypropylene 75 N/A Mounting Hole Dia. see “TYPE H” page 185 Remark: Add L to part number for Locking Legs Note: Connectors are shipped with lock nut and washer COMMERCIAL RIGHT ANGLE PCB MOUNT JACK — METAL BODY Cable Crimp P.N. Group Finish Insulation Impedance Tool Diecast High Profile, 15.88 [.625] 112502 N/A Nickel Polypropylene 50 N/A 112503 N/A Nickel Polypropylene 75 N/A Low Profile, 13.1 [.516] 112487 N/A Nickel Polypropylene 50 N/A 112494 N/A Nickel Polypropylene 75 N/A Note: Connectors are shipped with lock nut and washer Mounting Hole Dia. see “TYPE H” page 185 RIGHT ANGLE PCB MOUNT RECEPTACLE — METAL BODY Cable Crimp P.N. Group Finish Insulation Impedance Tool 112659 N/A Nickel Teflon 50 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 88 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:30 PM Page 89 BULKHEAD FEEDTHROUGH ADAPTERS For Cable Group Legend, see page 69 JACK-TO-JACK BULKHEAD ADAPTER Cable Crimp P.N. Group Finish Insulation Impedance Tool 112433 N/A Nickel Delrin 50 N/A 112434 N/A Nickel Delrin 75 N/A Remark: 8.0 mm [.315] Max. panel thickness, M55339/13–00492 JACK-TO-JACK BULKHEAD ADAPTER Cable Crimp P.N. Group Finish Insulation Impedance Tool 112435 N/A Nickel Delrin 50 N/A 112436 N/A Nickel Delrin 75 N/A Remark: 7.0 mm [.276] Max. panel thickness, UG–492A JACK-TO-JACK BULKHEAD ADAPTER Cable Crimp P.N. Group Finish Insulation Impedance Tool 112437 N/A Nickel Delrin 50 N/A 112438 N/A Nickel Delrin 75 N/A Remark: Without gasket, 5.5 mm [.217] Max. panel thickness JACK-TO-PLUG BULKHEAD ADAPTER — PUSH-ON Cable Crimp P.N. Group Finish Insulation Impedance Tool 112532 N/A Nickel Teflon 75 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 89 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:30 PM Page 90 BULKHEAD ISOLATED GROUND ADAPTERS For Cable Group Legend, see page 69 JACK-TO-JACK BULKHEAD — ISOLATED ADAPTER Cable Crimp P.N. Group Finish Insulation Impedance Tool 112439 N/A Nickel Delrin 50 N/A 112440 N/A Nickel Delrin 75 N/A Remark: With Isolated Bushing, 4.5 mm [.177] Max. panel thickness JACK-TO-JACK BULKHEAD — ISOLATED ADAPTER Cable Crimp P.N. Group Finish Insulation Impedance Tool 112443 N/A Nickel Delrin 50 N/A 112444 N/A Nickel Delrin 75 N/A Remark: Isolated from ground, 5.5 mm [.217] Max. panel thickness DUAL PORT RIGHT ANGLE PCB MOUNT RECEPTACLE Cable Crimp P.N. Group Finish Insulation Impedance Tool WHITE HOUSING 112660 N/A Nickel Polypropylene 50 N/A BLACK HOUSING 112661 N/A Nickel Polypropylene 50 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 90 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:30 PM Page 91 ADAPTERS For Cable Group Legend, see page 69 JACK-TO-JACK ADAPTER Cable Crimp P.N. Group Finish Insulation Impedance Tool 112445 N/A Nickel Delrin 50 N/A 112446 N/A Nickel Delrin 75 N/A PLUG-TO-PLUG ADAPTER Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112447 N/A Nickel Delrin 50 N/A 112448 N/A Nickel Delrin 75 N/A Diecast Shell 112449 N/A Nickel Delrin 50 N/A 112450 N/A Nickel Delrin 75 N/A RIGHT ANGLE ADAPTER — PLUG-TO-JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool Brass Shell 112451 N/A Nickel Delrin 50 N/A 112452 N/A Nickel Delrin 75 N/A Diecast Shell 112453 N/A Nickel Delrin 50 N/A 112454 N/A Nickel Delrin 75 N/A RIGHT ANGLE ADAPTER — PLUG-TO-PLUG Cable Crimp P.N. Group Finish Insulation Impedance Tool 112655 N/A Nickel Delrin 50 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 91 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:30 PM Page 92 TEE ADAPTERS For Cable Group Legend, see page 69 TEE ADAPTER — JACK-TO-JACK-TO-JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112455 N/A Nickel Delrin 50 N/A 112456 N/A Nickel Delrin 75 N/A TEE ADAPTER — JACK-TO-PLUG-TO-JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 112461 N/A Nickel Delrin 50 N/A 112462 N/A Nickel Delrin 75 N/A Remark: Diecast Version Remark: TEE contact pin isolated completely TEE ADAPTER — JACK-TO-JACK-TO-PLUG Cable Crimp P.N. Group Finish Insulation Impedance Tool 112567 N/A Nickel Delrin 50 N/A 112590 N/A Nickel Teflon 50 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 92 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:30 PM Page 93 TERMINATORS For Cable Group Legend, see page 69 BNC TERMINATOR PLUG Cable Crimp P.N. Group Finish Insulation Impedance Tool 202103 N/A Nickel Delrin 50 N/A 202104 N/A Nickel Teflon 50 N/A 202105 N/A Nickel Delrin 75 N/A 202106 N/A Nickel Teflon 75 N/A 202107 N/A Nickel Delrin 93 N/A 202108 N/A Nickel Teflon 93 N/A 202113N/ANickel Teflon 50 N/A HIGH PERFORMANCE 202119N/ANickel Teflon 75 N/A HIGH PERFORMANCE BNC TERMINATOR JACK Cable Crimp P.N. Group Finish Insulation Impedance Tool 202120 N/A Nickel Delrin 50 N/A 202111 N/A Nickel Delrin 75 N/A 112504 N/A Nickel Delrin 500 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 93 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:30 PM Page 94 ACCESSORIES For Cable Group Legend, see page 69 BNC MALE CAP & CHAIN Cable Crimp P.N. Group Finish Insulation Impedance Tool 202100 N/A Nickel N/A N/A N/A WITH CHAIN Remark: Chain Length 100 mm 202100-10 N/A Nickel N/A N/A N/A LESS CHAIN BNC MALE SHORTING CAP Cable Crimp P.N. Group Finish Insulation Impedance Tool 202114 N/A Nickel Teflon N/A N/A LESS CHAIN 202115 N/A Nickel Teflon N/A N/A WITH CHAIN For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. 94 For Crimp Tool information, see page 183. BNC COAXIAL CONNECTORS