Xtreme/104 Applications Xtreme/104 adapters offer four and eight asynchronous RS-232 and/or RS- 485/422 serial ports for data collection devices, barcode readers, time clocks, scales and other industrial automation equipment. Xtreme/104 adapters are ideal industrial strength solutions for control and automation applications requiring single node or multi-drop communications over short or long distances using PC/104 bus compatible computers. Features Four and eight asynchronous RS-232, and/or RS-485/422 serial ports - each port's electrical interface is jumper selectable (Xtreme/104 models) Four and eight asynchronous RS-232 (Xtreme/104 232 models) Supports data communications speeds up to 230.4 KBPS (RS-232) or 460.8 KBPS (RS-485) 16C654 UARTs control each port providing 64 bytes of TxD/RxD FIFO buffers Supports two RS485 modes: Full Duplex Warranty and Service Half Duplex with auto TxD echo cancellation Connect Tech, an ISO 9001 registered company, has provided high performance Each RS-485 transmitter and receiver has a jumper selectable 120 Ohm communication solutions since 1985, building and testing products to meet high termination resistor standards of quality and reliability. Xtreme/104 adapters come with a one year warranty. Eight pre-defined sets of I/O addresses are jumper selectable. IRQ lines are jumper selectable. A choice of IRQ lines 3, 4, 5, 6, 7, 9/2, 10, 11, 12, 14, 15 is available and each Xtreme/104 board can be set to run on one or Specifications two interrupts. Xtreme-4/104 Xtreme-8/104 Independent port configuration with baud rates from 50 BPS to 230.4 KBPS Xtreme-4/104 232 Xtreme-8/104 232 (Xtreme/104 232 models); 50 BPS to 460.8 KBPS (Xtreme/104 models RS- Number of ports 4 8 485); data bits of 5, 6, 7 or 8; stop bits of 1, 1.5, or 2, and odd, even, or stick Electrical Interface Xtreme/104 models: RS-232 and/or RS-485/422 each port is parity jumper selectable Optional DB9 male cables available Xtreme/104 232 models: RS-232 only Includes SeePORT, a full featured Windows 95/98 software data analyzer Connectors 40 pin header connectors (optional DB9 male cables available) Easy installation comes with comprehensive manual and driver software Control Signals RS-232: DTR, DSR, RTS, CTS, RI, TxD, RxD, DCD RS-485: TxD ±, RxD ±, CTS ±, RTS ± Benefits Baud Rates RS-232: 50 BPS - 230.4 KBPS High Speed, High Performance Communications RS-485: 50 BPS - 460.8 KBPS Achieve rapid data transfer rates up to 460.8 KBPS. State of the art 16C654 quad I/O Addresses eight pre-defined sets of I/O addresses are jumper selectable - UARTs with 64 bytes of transmit and receive FIFO buffers offload interrupt requires one set of eight addresses handling and buffering from the main CPU, thus improving overall system Interrupts jumper selectable for IRQs 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15 performance. UART Type 16C654 quad UARTs c/w 64 byte TxD/RxD FIFO buffers Dimensions Height: 9.60 cm Hardware Flexibility Length: 10.41 cm Xtreme/104 offers hardware flexibility and adaptability for your application. You Width: 1.12 cm can configure each port's electrical interface, baud rate, parity, data and stop bits Power Requirements +5 VDC @ 100mA (max) 5% independently and various connector options are offered to suit your needs. Environmental Xtreme/104 supports two RS-485 modes: Full Duplex; and Half Duplex with auto Temperature: (operating) 0 to 70º C Requirements TxD echo cancellation. (storage): -40 to 150º C Humidity: 95% non-condensing Software Compatibility Bus ISA bus compatible 16 bit PC/ 104 connector. Because of its compatibility with standard PC serial ports, the Xtreme/104 boards Software Compatibility DOS, Linux, QNX, and Windows 95/98/NT/2000 (contact support all the most popular operating systems and communication software. For Connect Tech for most current list) applications that do not support multi-port adapters, the Xtreme/104 board comes with a DOS and a Windows 95/98 driver. System Requirements one available PC/104 module stack connector and hardware interrupt (if required) Easy to Use Part Numbers Model The Xtreme/104 comes ready for simple installation. Included are board, DOS and Please contact Connect Tech for more information about Windows 95/98 driver software and a comprehensive manual. Xtreme/104 adapters Diagnostic Tools Xtreme/104 adapters include the Windows 95/98 software data line analyzer, Trademarks SeePORT to help you diagnose communication problems and therefore minimize © 2000, 2001, Connect Tech Inc. All other brands & product names are trademarks or registered trademarks of their respective holders downtime. Quality and Reliability since 1985 Connect Tech Inc. 42 Arrow Road Email: sales@connecttech.com Guelph, Ontario FTP: ftp://ftp.connecttech.com Canada N1K 1S6 URL: http://www.connecttech.com Tel: 519-836-1291 800-426-8979 Fax: 519-836-4878 CTIX-00003,Rev. 0.02 Printed 05/01