Xtreme/104 Opto Serial Communications Xtreme/104 Opto Features Two or four asynchronous serial ports in various electrical interface configurations (jumper selectable) 3kV optical isolation Supports full duplex (4 wire), half duplex (2 wire) with auto TxD echo cancellation and multi-drop (4 wire) communication modes in RS-422/485 Maximum data rates of 460.8 Kbps Jumper selectable 120 Ohm termination resistor included on each RS-422/485 transmitter and receiver Each port is configurable for baud rate, parity, data and stop bits. Industrial temperature models available (-40˚C to 85˚C) Specifications Number of Ports 2 or 4 ports Electrical Interface RS-232 or RS-422/485 (electrical interface is jumper selectable) Compact yet powerful, the Xtreme/104 Connectors 10-pin header connectors Opto performs where others fail. Durable custom connectors and optional DB-9 male cables available) and stackable, Xtreme/104 Opto’s small RS-232: TxD, RxD, RTS, CTS Control Signals form factor makes it the ideal serial RS-422/485: TxD+/-, RxD+/-, CTS+/-, RTS+/- communications link in today’s demanding Baud Rate RS-232: 50 bps to 230.4 Kbps embedded systems. RS-422/485: 50 bps to 460.8 Kbps (Custom baud rates available) Xtreme/104 Opto offers 3 kV optical Interrupts Jumper selectable for IRQs 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 15 isolation on all signals and ports to ensure Eight pre-defined sets of I/O addresses are jumper selectable I/O Addresses smooth, error-free transmission of data UART Type 16C2850 dual UARTs with 128 byte transmit and receive FIFO even in the noisiest environments. buffers Dimensions Width: 9.60 cm/3.77" With the added feature of industrial Length: 10.41 cm/4.09” (includes 10 pin headers) Height: 1.12 cm/0.44” temperature range operation, Xtreme/104 Opto is well suited to any embedded Operating Temperature: 0º C to 70º C (32º F to 158º F) Environmental Industrial Temperature models: -40º C to 85º C (-40º F to 185º F) computer system that is exposed to harsh Storage Temperature: -40º C to 150º C (-40º F to 302º F) conditions. Humidity: 95% non-condensing Bus ISA bus compatible with 16 bit PC/104 connector Based on the 16C2850 UART with 128 byte Software Windows 95/98/Me/CE/CE.NET/NT/2000/XP, transmit and receive FIFO buffers, Compatibility Linux, QNX, SCO Unix, VxWorks, DOS and Solaris Xtreme/104 Opto provides rapid data Optical Isolation Each port is isolated up to 3 kV AC peak, 3.0 kV DC and 2.1 kV AC communications for your military, RMS on all signals aerospace, medical, transportation and System One available PC/104 module stack connector and hardware industrial automation applications. Requirements interrupt (if required) Power +5 V DC @ 260mA (typ) +/-5% Requirements All Xtreme/104 Opto cards include lifetime warranty and free technical support. 42 Arrow Road Phone: 1-519-836-1291 Connect Tech Inc. Guelph, ON, Canada Toll free (in North America): 1-800-426-8979 Industrial Strength Communications N1K 1S6 Fax: 1-519-836-4878 www.connecttech.com Email: sales@connecttech.com ©2010, Connect Tech Inc. All other brands & product names are trademarks or registered trademarks of their respective holder CTIX-00005 Rev. 0.07 February 2, 2010