PCI-1553 Interface for PCI MIL-STD-1553 Features ■ Simultaneous Bus Controller, 31 Remote Terminals and Bus Monitor ■ Easy-to-use BusTools/1553 Windows-based GUI bus analyzer is available ■ Advanced, high-level software API libraries ■ 1 or 2 independent MIL-STD-1553 dual-redundant busses (channels) ■ Multi-function and Single-function Interfaces The PCI-1553 provides the highest level single-function versions The PCI-1553 can provide one or two of performance and flexibility for single-function interfaces with all the MIL-STD-1553A/B or MacAir protocols on ■ Conditional BC branching features and functionality of the on real-time message data the PCI bus. The PCI-1553 is integrated or status multi-function versions, but only one with powerful software that reduces major operational mode is enabled at a development time. All databus ■ Aperiodic message insertion time - emulating either a Bus Controller functionality is supported from our ■ or 31 Remote Terminals or Bus Monitor. Real-time bus playback with advanced API (Application Programming RT edit mode Interface). Standard features include Software real-time bus playback (with ability to edit ■ I/O triggering and error Included with the PCI-1553 is Condor’s out RTs), aperiodic message insertion, error injection/detection flexible, high-level API which supports up injection/detection, conditional BC ■ 1 Mbyte shared RAM per to 10 independent 1553 channels. Windows branching, 45-bit timetags and “Oneshot” channel XP, 2000, Me, NT, 98, 95, Red Hat Linux, BC operation. Provides host software VxWorks, LabWindows/CVI, Visual Basic and ■ Supports MIL-STD-1553A synchronization to pulses from external and B Notice II source code support is provided. LabVIEW timing sources (IRIG, GPS, etc). The Bus and Solaris support are optionally available. Monitor mode provides 100% bus ■ MacAir support available BusTools/1553, Condor’s GUI bus analysis, monitoring of fully loaded 1553 or MacAir simulation and data logging solution for ■ Variable output voltage buses. 1553, is available. Condor’s high performance and intuitive software Multi-function Interfaces solutions provide complete and simplified One or two multi-function interfaces are access to MIL-STD-1553 functionality for available on a single PCI board. They can development, integration, test, embedded operate simultaneously as a BC, up to 31 and maintenance applications. RTs and as a BM. It can emulate an entire dual-redundant channel internally, eliminating the need for external hardware to simulate missing nodes. 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630  www.condoreng.com PCI-1553 Interface for PCI MIL-STD-1553 Specifications Description Physical Bus Controller  3/4 length desktop PCI card (8.4" x 4.2")  Programmable control over: - Major and minor frame content and timing - Intermessage gap times Environmental - Response time-out and late response  Operating temperature range: 0°C to +70°C  Modify messages, data or setup while card is running  Insert aperiodic messages into a running BC list Software Support  “Oneshot” mode for simplified BC operation  API - Includes high-level API libraries for  Conditional message sequencing based on real-time Windows XP, 2000, Me, NT, 98, 95, Red message data or status Hat Linux, VxWorks, LabWindows/CVI  Selectable interrupt generation and status messages and Visual Basic - Full range of system conditions - Source code API library provided - All detected errors  GUI - Optional BusTools/1553 GUI bus analyzer  Full error detection  LabVIEW - Support optional - Invalid word - Late response  Solaris - Support optional - Bit count error - Early response - High word - No response On-board Shared RAM - Low word - Incorrect RT address  1 Mbyte (per dual-redundant channel) - Inverted sync - Parity error - Manchester Connections  Extensive programmable error injection (on a per word basis)  Programmable direct or transformer coupling  Synchronize BC operation to external time source  Input and output triggers  Transition cabling to 1553 cable jacks included Remote Terminal  Multiple RT simulation (up to 31 RTs) Multi-function Operational Modes  Programmable error injection (on a per word basis)  Simultaneous BC, 31 RTs and BM  Modify data, status words or setup while card is running  Programmable message content (linked message buffers) Single-function Operational Modes  Interrupts can be generated on a per message basis upon End of Message and error conditions  BC or 31 RTs or BM Bus Monitor Power (two channels, 50% duty cycle)  + 5 VDC:1.5 A  Capture 100% fully loaded bus traffic with: - Time-tagging - Error status  + 12 VDC: 222 mA - Word status - Message status  - 12 VDC: 50 mA - RT response time  Interrupts can be selected by RT/SA/WC PCI Signal Compatibility  Extensive filtering and triggering options  5V Signaling - By individual RT/subaddress - Transmit, receive or broadcast mode codes Warranty: 3 year limited hardware warranty - Internal or external triggering - Trigger output on user specified data  Real-time bus playback with RT edit mode See our on-line Configuration Guide for a  45-bit, microsecond resolution timetagging complete list of available configurations  Host software synchronization to external timing sources Available Configurations PCI-1553-M MIL-STD-1553B multi-function, single channel PCI interface board PCI-1553-MM MIL-STD-1553B multi-function, two channel PCI interface board PCI-1553-S MIL-STD-1553B single-function, single channel PCI interface board PCI-1553-SS MIL-STD-1553B single-function, two channel PCI interface board A channel is a dual-redundant A/B pair Optional Software BusTools/1553 MIL-STD-1553 Bus Analysis, Simulation & Data Logging software for Windows (multi-function boards only) LV-1553 LabVIEW support for PCI-1553 SL-1553 Solaris support for PCI-1553 ©2004 Condor Engineering Inc. All rights reserved. Printed in the USA. 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000  Fax 805.963.9630  www.condoreng.com Specifications may change without notice. PCI-1553 6/04