CONCURRENT TECHNOLOGIES TP 402/351-RA
Features
- 1.5 GHz Intel® Core™ 2 Duo processor:
- 2 or 4 Gbytes of soldered DDR2-400 registered ECC SDRAM
- 2 serial channel interfaces accessed via J2
- 2 x 10/100/1000Mbps Ethernet interfaces accessed via J2
- 2 x USB 2.0 interfaces accessed via J2
- 5 x Serial ATA150 channels:
- CompactPCI controller:
- Option for graphics on separate PMC card:
- Option to bypass CompactPCI bus (Satellite Mode)
- Ruggedized air-cooled version (RA-Series) also available:
- Ruggedized conduction-cooled version (RC-Series) also
- Support for Linux®, Windows® XP, Windows® XP
- Watchdog and long duration timer
- - -40°C to +75°C
- - -40°C to +85°C
- - 1 x channel for on-board Flash disk
- - 2 x channels accessed via J2
- - 2 x channels routed to optional dual flash disk module
- - 32-bit at 33/66 MHz CompactPCI interface
- - 4 Mbytes L2 cache
- - 64 Kbytes L1 cache
- - analog and digital graphics via front panel and via PMC
- - conduction-cooled to ANSI/VITA 30.1-2002
- - conformally coated
- - conformally coated
- - graphics PMC card mounted on single slot 3U PMC
- - Intel® 64 Technology (64-bit computing support)
- - low power processor
- - operates in the system slot or in a peripheral slot
- - ruggedized or non-ruggedized versions
- - see separate TP 402/351-RA datasheet
- - see separate TP 402/351-RC datasheet
- available:
- carrier
- Embedded, Windows® Server 2003, Windows® 2000,
- QNX®, LynxOS® and VxWorks®
- rear I/O
Datasheet
Extracted Text
CompactPCI TP 402/35x-RA Rug gedized Rx - Se ries Intel® Core™ 2 Duo Pro ces sor, 3U SBC, Rug ged Air-Cooled AP PLI CA TIONS The TP 402/35x-RA is a PC-compatible high operating in temperatures ranging from -40°C to +75°C, performance, high functionality, ruggedized 3U where it is suitable for a range of demanding CompactPCI® board supporting the Intel® Core™ 2 Duo applications within the defense, industrial control, processor, 1.5 GHz or 1.06 GHz. It utilizes the Intel 3100 telecomms, telemetry, transportation, scientific and embedded server chipset to support up to 4 Gbytes of aerospace markets. Ruggedized conduction-cooled or soldered DDR2 ECC SDRAM. This single slot board non-ruggedized air-cooled versions are also available. To features a variety of interfaces including dual Serial simplify the board’s integration many popular industry ATA150, dual Gigabit Ethernet, RS232/422 and USB. The standard operating systems are supported. TP 402/35x-RA is a ruggedized air-cooled board HIGHLIGHTS n Ruggedized 3U single board computer: n Watchdog and long duration timer - -40°C to +75°C operating temperature n Option for graphics on separate PMC card: - ruggedized air-cooled - graphics PMC mounted on single slot 3U PMC carrier - conformally coated - analog and digital graphics via front panel and via PMC rear I/O n 1.06 GHz or 1.5 GHz Intel® Core™ 2 Duo processor: - ruggedized or non-ruggedized versions - 64 Kbytes L1 cache n Optional Built-In Test (BIT) support: - 4 Mbytes L2 cache - Power-on BIT, Initiated BIT, Continuous BIT - Intel® 64 Technology (64-bit computing support) n Ruggedized conduction-cooled version (RC-Series): - low power processor - conduction-cooled to ANSI/VITA 30.1-2002 n 2 or 4 Gbytes of soldered DDR2-400 registered ECC SDRAM - -40°C to +85°C n 2 x 10/100/1000Mbps Ethernet interfaces accessed via J2 - conformally coated n 5 x Serial ATA150 channels: - see separate TP 402/35x-RC datasheet - 2 x channels accessed via J2 n Non-ruggedized air-cooled versions: - 1 x channel for on-board Flash disk - rear plug compatible with the ruggedized version - 2 x channels routed to optional Flash Disk Module - useful for bench development n 2 serial channel interfaces accessed via J2 - use in commercial (non-rugged) applications n 2 x USB 2.0 interfaces accessed via J2 - see separate TP 402/35x datasheet n CompactPCI controller: n Support for Linux®, Windows® XP, Windows® XP - operates in the system slot or in a peripheral slot Embedded, Windows® Server 2003, Windows® 2000, - 32-bit at 33/66 MHz CompactPCI interface QNX®, LynxOS® and VxWorks® n Option to bypass CompactPCI bus (Satellite Mode) Con cur rent Tech nol o gies Plc 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 Con cur rent Tech nol o gies Inc 6 Tower Of fice Park, Woburn, MA 01801, USA TECHNOLOGIES Tel: (781) 933 5900 Fax: (781) 933 5911 email: info@gocct.com http://www.gocct.com Spec i fi ca tion Ruggedized Sin gle Board Computer n ruggedized air-cooled version n conformally coated Dual Flash DDR2 Core 2 Duo n commercial air-cooled version available Flash Disk SDRAM Processor Module n ruggedized conduction-cooled version available Cen tral Pro ces sor n 1.06 GHz Intel® Core™ 2 Duo processor U7500 Intel or 1.5 GHz Intel Core 2 Duo processor L7400: 3100 è using a mFC-BGA 478 (micro Flip-Chip Ball 5 x BIOS Grid Array) package SATA150 Flash Interfaces EPROM è 64 Kbytes of primary (L1) on-die cache è 4 Mbytes of shared secondary (L2) on-die x4 x1 cache è 667 MHz Front Side Bus (FSB) PCI-E to Intel Real-Time 4 x GPIO 2 x Serial 2 x PCI è Intel® 64 Technology (64-bit computing) Clock Signals Interfaces USB 2.0 82571EB Bridge n utilizes 64-bit Intel® 3100 server chipset: è single chip chipset with integrated memory and I/O controllers n provision for ITP debug port DRAM Battery 4 x 2 x 2 x 2 x CompactPCI n 2 or 4 Gbytes soldered DDR2-400 registered GPIO RS232/ USB Ethernet ECC SDRAM using: RS422/ 10/100/ 2 x RS485 1000Mbps SATA è single channel memory = PCI Express è single-bit error correction Other Pe riph eral In ter facesElec tri cal Spec i fi ca tion è peak bandwidth of up to 3.2 Gbytes/s n PC-compatible Real Time Clock (Year 2000 n +5V@3.1A (typical at 1.5 GHz, 1Gbyte DRAM) n accessible from processor or CompactPCI® bus compliant) n +3.3V@3.7A (typical with 1Gbyte DRAM) Hard/Flash Disk In ter faces n long duration timer n voltages +5%/-3% n 5 x Serial ATA150 interfaces: n watchdog timer n +12V and -12V not required è transfer rate up to 150 Mbytes/s n legacy speaker interface Safety n 2 x channels accessible via J2 n 2 x USB 2.0 interfaces: n PCB (PWB) manufactured with flammability n 1 x channel routed to on-board Flash disk è both accessed via J2 rating of 94V-0 n 2 x channels routed to optional Flash disk n external battery supply for RTC and BIOS data Module: n 4 x GPIO signals via J2En vi ron men tal Spec i fi ca tion 2 è one or two Flash disk drives n operating temperatures: n on-board I C bus used for local temperature è uses XMC connectors (see Note 1) and power supply sensors, accessible via J1 è -40°C to +75°C n storage temperature: Ethernet In ter faces CompactPCI In ter face è VITA 47 Class C3, -50°C to +100°C n 2 x channels supporting: n universal signaling support, compliant with n altitude (operating): è 10 Base-T, 100 Base-TX, 1000 Base-T PICMG 2.0 R3.0; 3.3V or 5V signaling levels -1,000 to 33,000 feet (-305 to 10,058 meters) è implemented by Intel® 82571EB via x4 PCI n 33/66 MHz; 32-bit interface accessed via J1 n 5% to 95% Relative Humidity, non condensing Express® port n utilizing a PCI Express-PCI bridge for off-board (operating/storage) è both channels accessed via J2 accesses n commercial air-cooled version: n operates as a System Slot controller Op tional Graphics In ter face è rear plug compatible (supporting up to 7 peripheral slots) or n optional ruggedized PMC card mounted on è see TP 402/35x datasheet operates in a Peripheral Slot: ruggedized 3U CompactPCI PMC carrier: n ruggedized conduction-cooled version: è supports hot-swapping peripheral boards è see separate IO PMC/722-RA and è rear plug compatible è PICMG 2.1 R2.0 Hot Swap Specification TP CRx/PMC-RA datasheets è see TP 402/35x-RC datasheet n option to disable CompactPCI interface n for IO PMC/722-RA: (Satellite Mode): Me chan i cal Spec i fi ca tion è implemented by Silicon Motion SM722 è receives power from CompactPCI bus n 3U form-factor: è analog and digital graphics accessed via è board can be hot swapped 3.9-inches x 6.3-inches (100mm x 160mm) front panel DVI-I connector or PMC rear I/O n single slot è 8 Mbytes video memory Firm ware Sup port è resolutions up to 1280 x 1024; supporting n connectors: IEC-1076-4-101 for J1-J2 n Phoenix™ Trus tedC ore BIOS up to 16M colors n operating mechanical: n comprehensive Power-On Self-Test (POST) è shock - VITA 47 Class OS2, 40g n LAN boot firmware included Se rial In ter faces n random vibration - VITA 47 Class V2, 0.04g²/Hz n 2 serial interfaces accessible via J2 Soft ware Sup port n 1 x RS232 interface supporting Tx and Rx n supports Linux®, Windows® XP, n 1 x RS232 interface supporting Tx, Rx, RI, CTS, Windows® XP Embedded, Windows® 2000, Note 1: The XMC con nec tors are pro vided for the RTS, DSR, DTR and DCD or 1 x RS422/485 Windows® Server 2003, QNX®, LynxOS® and SATA Flash Disk Mod ule only. The CPU heatsink for supporting Tx and Rx VxWorks® air-cooled boards does not al low an XMC mod ule. n 16550 compatible UARTs The con duc tion-cooled board does sup port an Op tional Built-In Test (BIT) Sup port op tional XMC mod ule (see the TP 402/35x-RC Flash EPROM n Power-on BIT (PBIT) datasheet). n 1 Mbyte of BIOS Flash EPROM n Initiated BIT (IBIT) n hardware write protect provided n Continuous BIT (CBIT) OR DER ING IN FOR MA TION Or der Num berProd uct De scrip tion (Hard ware) For the or der num ber suf fix (y) op tion please con tact your lo cal sales of fice: where y = SDRAM size TP 402/350-1yRA 1.06 GHz Core 2 Duo Pro ces sor U7500 y - up to 4 Gbytes SDRAM TP 402/351-1yRA 1.5 GHz Core 2 Duo pro ces sor L7400 For ac ces so ries please con tact your lo cal sales of fice. For air-cooled ver sions: com mer cial, ex tended tem per a ture or ruggedized con duc tion-cooled ver sions please con tact your lo cal sales of fice. All com pa nies and prod uct names are trade marks of their re spec tive or ga ni za tions. Datasheet Code 1569/0612 Spec i fi ca tion sub ject to change; E and OE. RoHS 2002/95/EC com pli ant.© Con cur rent Tech nol o gies 2012
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the TP 402/351-RA have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods