MB-PISA Card earlier Unpacking Pre-Installation Checklist q q q q q Voltage Maximum Power + 12 4 3 WattsVdc- 12 3 WattsVdc 238 WattsVdc+ 5 provided below). operate the complete computer assembly (maximum requirements, including option cards, Make sure your power supply has proper voltage outputs and sufficient available power to Make sure you have the proper cables needed to complete the installation. ordered with the sound option. Make sure you have speakers and the latest Sound drivers if the MB_PISA card was and Option Cards in your system. Make sure you have all hardware components necessary to install the SBC-MaX2, MB-PISA a SBC-MaX2.Make sure your main board is QuickInstall Instructions (this document) Driver Disks (for Sound Option) MB-PISA Board items should be included: shipping damage is noted upon receipt, report it to your shipper. When unpacking, the following Your product was packed at the factory for maximum protection during shipment. If any specification information. SBC-MaX. Refer to your Technical Manual for further design, application and set the sound option up for use. This board will only work with the SBC-MaX2 and not the Use these instructions to install your new MB-PISA Card on your SBC-MaX2 computer and to Instructions QuickInstall Installation 1. 2. 3. 4. 5. 6. 7. External Audio Connections PCI Slot #1 Circuit Board Connection Locations 2 Slot #1 ISA Input Power MB-PISA SBC-MaX2 Floppy Drive Socket DIMM Ethernet IDEPower In Primary the Monitor or Flat Panel Display. Check all connections, then power on both the SBC-MaX2 and MB-PISA Power Supply and to the connector at the far end of the cable. This will be identified as Drive A: Floppy Drive (J2) connector on the SBC-MaX2 board. Make sure to connect the floppy drive Attach a 3 ½” floppy disk drive to your system, at least temporarily. Connect the cable to the Secure option cards to mounting structure. Install option cards in the appropriate ISA or PCI card slot. Secure boards to mounting structure. Connect the MB-PISA board (J13 and J14) to the SBC-MaX2 board (J6 and J9). option cards to the system. check the SBC-MaX2 board for proper operation prior to installing the MB-PISA and any QuickInstall instructions. If possible,Install the SBC-MaX2 board in accordance with its 1. Diskette A:is set to 2. NOTE: Device setup procedures shown here are based on Windows 95™. Setup instructions are similar for other Operating Systems. Sound 1. 2. 3. 4. 5. 6. 7. 8. NOTE: Setup procedures for all possible option cards can not be presented here, follow the instructions provided by the manufacturer. If device drivers are needed, they will need to be obtained from the manufacturer of the card. Congratulations! 3 characteristics for a different installation. You may repeat the setup procedures above whenever it is necessary to change the system You have completed setup of your MB-PISA card on your SBC-MaX2 and it is ready for use. :, and Restart the computer.Remove any Disks from Drive A Enter “A:\sound” | OK | FINISH On ‘Search for driver’ screen, select YES | NEXT | OTHER LOCATIONS Insert ‘Windows 95 Sound/Utilities Disk’ into Drive A: DRIVER | UPDATE DRIVER AudioDrive’ | PROPERTIES |Select ‘Other Devices’ | ‘ESS ES1868 Plug and Play check ‘Disable in this hardware profile’ ‘Gameport Joystick’ | PROPERTIES |Select ‘Sound, Video and Game Controllers’ | Windows will load default drivers during setup, which need to be deleted. | DEVICE MANAGER To set up the sound drivers, select START | SETTINGS | CONTROL PANEL | SYSTEM Select EXIT, then ‘Save Changes and Exit’ to reboot the system with new settings. 1.44 MB, 3 ½” setting changes as needed for your system configuration: On power-up pressing the F2 key will enter the BIOS Setup Menu. Make the following Setup Options 1. 2. Technical Support Applications Computer Dynamics, Inc. 7640 Pelham Rd Greenville, SC 29615 PISA Option Qin Web.DOCRev. 2000-03-27 4 sales@cdynamics.comEmail: (864) 675-0106Fax: (864) 627-8800Phone: email anytime.time, and by fax or pm, Eastern 8:00 am to 6:00 Engineer with the specifics. We are available by phone Monday through Friday, information for implementing your MB-PISA, please contact your Computer Dynamics If you are experiencing problems with your MB-PISA board, or if you require additional Sales Representative. For these and other options, please contact your Computer Dynamics Applications Engineer or quality, digital stereo, audio output. Soundblaster™This unit can be configured during manufacturing with an Optional Digital Audio useable simultaneously).can be ordered (not all slots ISA connectors for addition of standard option cards. Maximum of 3 PCI and 4 ISA slots This unit can be configured during manufacturing with different combinations of PCI and PC Expansion