Manufacturers
COEV MAGNETICS/TYCO ELECTRONICS DN4835-8R2M
Description
INDUCTOR 8.2UH 1.26A 20% SMD 483
Part Number
DN4835-8R2M
Price
Request Quote
Manufacturer
COEV MAGNETICS/TYCO ELECTRONICS
Lead Time
Request Quote
Category
PRODUCTS - D
Datasheet
Extracted Text
Series Number DN4835 3003 9th Avenue SW DN6149 PO Box 50 DN8140 Watertown, SD 57201 DN8155 Toll free: 888-978-2638 DN1047 Ph: 605-886-3326 DN1058 Fax: 605-886-8995 SMD Unshielded Inductor Series; Part Numbering Sequence: ( Series Number ) - ( Suffix Code )(Tolerance), example DQ1260-220M Bulk Packaging add (-B) to end of Part Numbering Sequence. example DQ1260-22M-B W Suffix Code C B Y A D H Suggested Land Pattern Series Maximum Dimensions Reference Dimensions Features: Number Units D W H Y A B C High energy storage and low resistance inches 0.189" 0.169" 0.138" 0.047" 0.217" 0.047" 0.169" DN4835 Reliable surface mounting, flat top for pick [ mm ] [ 4.80 ] [ 4.30 ] [ 3.50 ] [ 1.20 ] [ 5.50 ] [ 1.20 ] [ 4.30 ] and place. inches 0.240" 0.217" 0.193" 0.051" 0.268" 0.051" 0.217" DN6149 Smaller real estate than other common [ mm ] [ 6.10 ] [ 5.50 ] [ 4.90 ] [ 1.30 ] [ 6.80 ] [ 1.30 ] [ 5.50 ] inductors. inches 0.319" 0.287" 0.157" 0.083" 0.346" 0.083" 0.287" DN8140 Robust temperature deflection to prevent [ mm ] [ 8.10 ] [ 7.30 ] [ 4.00 ] [ 2.10 ] [ 8.80 ] [ 2.10 ] [ 7.30 ] damage during solder reflow. inches 0.319" 0.287" 0.217" 0.083" 0.346" 0.083" 0.287" DN8155 Tape and Reel mechanical specifications [ mm ] [ 8.10 ] [ 7.30 ] [ 5.50 ] [ 2.10 ] [ 8.80 ] [ 2.10 ] [ 7.30 ] available upon request. inches 0.406" 0.366" 0.185" 0.114" 0.433" 0.114" 0.366" DN1047 Operating Temperature -40°C to +85°C. [ mm ] [ 10.30 ] [ 9.30 ] [ 4.70 ] [ 2.90 ] [ 11.00 ] [ 2.90 ] [ 9.30 ] Highly resistive core for EMI suppression inches 0.409" 0.370" 0.228" 0.114" 0.433" 0.114" 0.370" DN1058 [ mm ] [ 10.40 ] [ 9.40 ] [ 5.80 ] [ 2.90 ] [ 11.00 ] [ 2.90 ] [ 9.40 ] applications. DN4835 DN6149 DN8140 DN8155 DN1047 DN1058 3 3 3 3 3 3 1 2 2 2 2 2 2 Tolerance Tolerance Tolerance Tolerance Tolerance Tolerance DCR I I I I I I L Suffix SAT DCR MAX DCR MAX DCR MAX DCR MAX DCR MAX 4 4 4 4 4 4 µH Codes W A W A W A W A W A W A Suffix Suffix Suffix Suffix Suffix Suffix 1.0 1R0 0.033 3.80 M 1.4 1R4 0.038 3.30 M 1.8 1R8 0.042 2.91 M 2.2 2R2 0.047 2.60 M 2.7 2R7 0.052 2.43 M 3.3 3R3 0.058 2.15 M 3.9 3R9 0.076 1.98 M 4.7 4R7 0.094 1.70 M 5.6 5R6 0.101 1.60 M 6.8 6R8 0.117 1.41 M 0.08 1.6 M 8.2 8R2 0.132 1.26 M 10 100 0.182 1.15 M 0.10 1.44 M 0.08 1.44 M 0.07 2.30 K 0.05 2.38 M 0.06 2.60 M 12 120 0.210 1.05 M 0.12 1.40 M 0.09 1.39 M 0.08 2.00 K 0.06 2.13 M 0.07 2.45 M 15 150 0.235 0.92 M 0.14 1.30 M 0.10 1.24 M 0.09 1.80 K 0.07 1.87 M 0.08 2.27 M 18 180 0.338 0.84 M 0.15 1.23 M 0.11 1.12 M 0.10 1.60 K 0.08 1.73 M 0.09 2.15 M 22 220 0.378 0.76 M 0.18 1.11 M 0.13 1.07 M 0.11 1.50 K 0.09 1.60 M 0.10 1.95 M 27 270 0.522 0.71 M 0.20 0.97 M 0.15 0.94 M 0.12 1.30 K 0.10 1.44 M 0.11 1.76 M 33 330 0.540 0.64 K 0.23 0.88 L 0.17 0.85 M 0.13 1.20 K 0.12 1.26 M 0.12 1.50 M 39 390 0.587 0.59 K 0.32 0.80 L 0.22 0.74 M 0.16 1.10 K 0.15 1.20 M 0.14 1.37 M 47 470 0.844 0.54 K 0.37 0.72 L 0.25 0.68 M 0.18 1.10 K 0.17 1.10 M 0.17 1.28 K 56 560 0.937 0.50 K 0.42 0.68 K 0.28 0.64 K 0.24 0.94 K 0.20 1.01 K 0.19 1.17 K 68 680 1.117 0.46 K 0.46 0.61 K 0.33 0.59 K 0.28 0.85 K 0.22 0.91 K 0.22 1.11 K 82 820 0.60 0.58 K 0.41 0.54 K 0.37 0.78 K 0.25 0.85 K 0.25 1.00 K 100 101 0.70 0.52 K 0.48 0.51 K 0.43 0.72 K 0.34 0.74 K 0.35 0.97 K 120 121 0.93 0.48 K 0.54 0.49 K 0.47 0.66 K 0.40 0.69 K 0.40 0.89 K 150 151 1.10 0.40 K 0.75 0.40 K 0.64 0.58 K 0.54 0.61 K 0.47 0.78 K 180 181 1.38 0.38 K 1.02 0.36 K 0.71 0.51 K 0.62 0.56 K 0.63 0.72 K 220 221 1.57 0.35 K 1.20 0.31 K 0.96 0.49 K 0.72 0.53 K 0.73 0.66 K 270 271 1.31 0.29 K 1.11 0.42 K 0.95 0.45 K 0.97 0.57 K 330 331 1.50 0.28 K 1.26 0.40 K 1.10 0.42 K 1.15 0.52 K 390 391 1.77 0.36 K 1.24 0.38 K 1.30 0.48 K 470 471 1.96 0.34 K 1.53 0.35 K 1.48 0.42 K 560 561 1.90 0.32 K 1.90 0.33 K 680 681 2.25 0.28 K 820 821 2.55 0.24 K 1000 102 11.5 0.11 K 1) Test conditions are 1Vrms and 1.0-8.2µH(7.96MHz), 10-82µH (2.52MHz) 100-1000µH (1kHz). 2) DCRs (DC resistances) are maximums @20°C. 3) DC (Direct Current) current applied to produce a typical 10% drop in inductance or a temperature increase of 40°C whichever is lower. Maximum current is DC + AC. 4) Suffix of J=5%, K=±10%, L=±15%, M=20%, N=+40%-30% Specifications subject to change without notice. Call Toll Free: 888-978-2638 Website: www.coev.net XXX D 0.5 D MAX. 13 0.5 21 0.8 B B MIN. 1 1.0 2 ±0.5 C 1 C MAX. 2 0.5 A 2 Dimensions are in millimeters unless specified. A MAX. Series Reel Packaging Reel dimensions Number Units A B C D Qty Specification in. 12.99" 4.02" 0.87" 0.106" DN4835 2000 90-0049 [mm] [ 330 ] [ 102.0 ] [ 22.2 ] [ 2.70 ] in. 12.99" 4.02" 0.87" 0.106" DN6149 1000 90-0050 [mm] [ 330 ] [ 102.0 ] [ 22.2 ] [ 2.70 ] in. 12.99" 4.02" 0.87" 0.106" DN8140 1000 90-0047 [mm] [ 330 ] [ 102.0 ] [ 22.2 ] [ 2.70 ] in. 12.99" 4.02" 0.87" 0.106" DN8155 1000 90-0048 [mm] [ 330 ] [ 102.0 ] [ 22.2 ] [ 2.70 ] in. 12.99" 4.02" 1.19" 0.106" DN1047 1000 90-0051 [mm] [ 330 ] [ 102.0 ] [ 30.2 ] [ 2.70 ] in. 12.99" 4.02" 1.19" 0.106" DN1058 800 90-0052 [mm] [ 330 ] [ 102.0 ] [ 30.2 ] [ 2.70 ] PACKAGING NOTE: Only pressure sensitive cover tape is to be used. Ko 2.0 ± 0.1 ± 0.05 W ± 0.3 Bo ± 0.1 0.35 ± 0.05 Ao ± 0.1 Primary units in millimeters. Series Ao Bo W P Ko DN4835 4.20 4.60 16.0 8.0 4.00 DN6149 5.40 6.10 16.0 12.0 5.30 DN8140 6.60 7.00 16.0 12.0 4.10 DN8155 7.14 7.94 16.0 12.0 5.68 DN1047 9.40 10.40 24.0 12.0 4.80 DN1058 9.50 10.50 24.0 12.0 5.90 Series Revision Customer Packaging Specifications DN SERIES B For Print Distribution to Customers Sheet 2 of 3 Item Specification Test Method/Condition Environmental After exposure part remains within Static Humidity Expose parts to an environment of +50°C with 90 to 95% R.H. for specified electrical parameters for 100 hours. After exposure, allow parts to dry for 2 hours before L, Q and DCR. measurements are taken. After exposure part remains within Storage Life Subject parts to an environment of +50°C 90 to 100% R.H. for 46 to specified electrical parameters for 50 hours. After exposure, allow parts to dry for 2 hours before L, Q and DCR. measurements are taken. Moisture Resistance After exposure, part shall not Per MIL-STD 202 Method 106, ten 24 hour cycles at +25°C to have a shorted or open winding. +65°C at 80 to 95% R.H. During any of the first 9 cycles, inductors are revolved from the chamber and exposed to -10°C for 3 hours. Allow parts to dry for 2 hours before measurements are taken. Temperature Cycle After exposure part remains 10 cycles (Air to Air) 1 cycle shall consist of: within specified electrical 30 minutes exposure to +85°C parameters for L, Q and DCR. 30 minutes exposure to -40°C Allow 20 minutes transition between extremes. Temperature Shock After exposure part remains 10 cycles (Air to Air) 1 cycle shall consist of: within specified electrical 30 minutes exposure to -45°C parameters for L, Q and DCR. 30 minutes exposure to +125°C 15 seconds maximum transition between temperatures General Storage Temperature -40°C to +85°C Range Operating Temperature -40°C to +85°C Range Flammability IEC 695-2-2 Withstands needle-flame test Other Vibration After exposure part remains Inductors shall be randomly vibrated per NAVMAT P9492 within specified electrical profile. Samples shall be subjected to 0.04G/Hz for a parameters for L, Q and DCR. minimum of 15 minutes per axis, for each of the three axes. Mechanical Shock After exposure part remains Test per MIL-STD 202 method 213 test condition A, test within specified electrical mounted samples 3 axes, 6 times, totaling 18 shocks. parameters for L, Q and DCR. (50Gs, 11ms, half-sine). Solderability Wetting shall cover 90% minimum Dip pads in RMA flux, 63/37 solder (Sn/Pb) at 232°C for 5 seconds of each termination ±2 seconds. Component Adhesion 4 pounds Apply and measure force with a digital force gauge set. (Push Test) Resistance to Solvent No sign of degradation in Withstands 6 minutes of alcohol. appearance or marking detail. Withstands 3 minutes forced spray Freon TMS Load Life After exposure, part shall not Parts to be stored at 110°C for 1000 hours with rated current have a shorted or open winding. applied. Parts to be tested at: start, 500 and 1000 hours. Allow 2 hours at room temperature before testing. Series Revision For Print Distribution to Customers DN SERIES B Sheet 3 of 3
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the DN4835-8R2M have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods