CLAYPOWER CP-08032

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number CP-08032
Manufacturer CLAYPOWER
Category ATX+24V OUTPUT POWER SUPPLY
Price Request Quote
Lead Time Request Quote

Description

Clay Power CP-08032 Power Supply. 320W | 100 ~ 240V Input | Output: +3.3V/20.0A | +5.0V/32.0A | +12.0V/11.0A | +24.0V/4.0A | ATX +24V Outut

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

Elite.Parts is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need a CP-08032? We can help you find it at a competitive price!

Specifications

Dimensions (WxHxD) 5.91" x 3.35" x 5.51"
Output Wattage 320
RoHS Compliance Version Yes

Datasheet

Download "Claypower=CP-08032_datasheet-913682679.pdf" (146 KiB)

Extracted Text

SWITCHING POWER SUPPLY SPECIFICATION CP-08032 Hot-Swapable ATX TEL 626.303.8885 FAX 626.301.0588 727 Phillips Dr. City of Industry, CA 91748 www.claypower company.com 1.Input Characteristics 1.1 Input Voltage Range ----------------90To264Vac Full Range, Active PFC,PF>0.90 1.2 Input Frequency Range ------------47Hz To 63Hz. 1.3 Input Ac Current ( Max ) -----------7A Max. @115Vac, 4A Max. @230Vac Full Load. 1.4 Inrush Current -----------------------At 132Vac / 264Vac, Full Load Condition, No Damage Occur. Input Fuse Shall Not Blow. 1.5 Efficiency ------------------------------63% Min, At Typical Line Input Full Load. 1.6 Input Leakage Current ------------Leakage Current From Line to Ground Will Be Less 3.5mA rms. Measurement Will Be Made At 240Vac/60Hz. 2.Output Characteristics 2.1 Static Output Characteristics. Output Load Range Surge Regulation Ripple Max Ripple & Noise Voltage Min. Max. 10 Sec. Min. Max. mV P-P Max. mV P-P 1. +5.0 V 2.5 A 32.0 A - 5 % + 5 % 50 mV 100 mV 2. +3.3 V 0.2 A 20.0 A - 5 % + 5 % 50 mV 100 mV 3. +12.0 V 0.5 A 11.0 A - 5 % + 5 % 100 mV 150 mV 4. -5.0 V 0.0 A 1.0 A - 10 % + 10 % 150 mV 200 mV 5. -12.0 V 0.0 A 1.0 A - 10 % + 10 % 150 mV 200 mV 6. +24.0 V 0.2 A 4.0 A - 5 % + 5 % 240 mV 240 mV 7. SB +5.0 V 0.0 A 1.0 A - 5 % + 5 % 100 mV 100 mV Note: 1. Noise Test ----- Noise Bandwidth Is From Dc To 20MHz. 2. Ripple Frequencies Greater Than 1 MHz Shall Be Attenuated By the Measurement System. 3. Add 0.1uF / 10uF Capacitor At Output Connector Terminals For Ripple & Noise Measurements. 4. Output Total Power Shall Not Execeed 320W Max. 2.2 Dynamic Output Characteristics: 2.2.1Rise Time ---- 100 ms Max. At Nominal Line Full Load. 2.2.2Turn-on Delay Time ----- 600mS Max. At Nominal Line Full Load. 2.2.3Hold-up Time ----- 16 ms Min. For + 5V Output At Nominal Line Full Load. 2.2.4Transient Overshoot ----- 10% Max. Of Delay State After Load Change Of 25% Within The Range Of 50% To 100% Of Full Load. 2.2.5Temperature Coefficient ----- 0.03% Per �C Max. 3.Protections 3.1 Over Voltage Protection --Standard On +3.3V Ouput Set At 4.10Vdc At +/-0.40Vdc. +5.0V Output Set At 6.25Vdc At +/-0.75Vdc. +12.0V Output Set At 14.6Vdc At +/-1.0Vdc. +24.0V Output Set At 25.6Vdc At +/-1.0Vdc. 3.2 Short Circuit Protection --- A Short Circuit Placed Between Dc Return And Output Shall Cause No Damage And The Power Supply Shall Shutdown. 3.3 Over Power Protection --- The Power Supply Can Use Electronic Circuit To Limit The Output. Power Against Excessing +150% Of Full Load. Or Protected against Excessive Power Delivery Due To Short Circuit Of Any Output Or Over Total Power. 3.4 No load Operation --- No Parts Damaged On Power Supply. 4.Dielectric Withstand Voltage 4.1 Primary to Secondary --- 1500Vac For 1 Minute. Or 1800Vac For 1 Sec. 4.2 Primary to Safety Ground --- 1500Vac For 1 Minute. Or 1800Vac For 1 Sec. 4.3 Insulation Resistance --- Primary To Safety Ground - 500Vdc, 50M ohms Min. 5.ELECTROMAGNETIC COMPATIBILITY 5.1 Electromagnetic Interference (EMI) : a.FCC Part 15,subject j, class B. b.EN55022 (CISPR 22), class B. c.VCCI Class “ 2 “. 5.2 Electrostatic Discharge (ESD) / 8KV : Comply with IEC 801-2 (1984). 5.3 Radio-Frequency Electromagnetic Field (RS) : Comply with IEC 801-3 (1984). 5.4 Harmonics Current : Comply with EN61000-3-2. 5.5 Fast Transient Burst (EFT) / 2KV : Comply with IEC 801-4 (1988). 6.Product Safety This Power Supply Is Designed Can Meet The Following Spec. 6.1 UL/CUL ---------------------------------------- UL60950 6.2 TUV --------------------------------------------- EN 60950 6.3 CB----------------------------------------------- EN 60950 7.Environment 7.1 Operation Temperature -------------------- Air Temperature 0 �C To 50 �C. 7.2 Operation Relative Humidity ------------- 20% To 90%. 7.3 Storage Temperature ----------------------- Air Temperature -20 �C To 60 �C. 7.4 Storage Relative Humidity ---------------- 5% To 95%. 7.5 Altitude ----------------------------------------- Operate Properly At Any Altitude Between 0 To 100,000 Feet. Storage 40,000 Feet. 7.6 Vibration --------------------------------------- 0.38mm. 5-55-5Hz, 1 Minutes Per Cycle; 30 Minutes For Each Axis ( X,Y,Z ). 8.Burn-In 8.1 Burn-In ------------------------------------------ At 45 �C, Max. Load, 4 Hours. 9.Mean Time Between Failure --------------------- 50 KHrs Minimum At Full Load For 25 �C Ambient Temperature. 10.Power-Good Signal +4.75 +4.75 Ts -> +5V Output Power Good Signal <- Tr -> <- Td -> -> T1 <- Note: Tr � 100 ms, T1 � 1 ms, Td = 100 - 500 ms. 11.Dimension 11.1 W x H x D --------------------------------------- 150.0 x 86.0 x 140.0 ( mm ) ! Note: See The Mechanical Drawing. ! !

Related Products

CLAYPOWER
Clay Power CP-05015 150W , 100 ~ 240V Input, Output: +3.3V/15.0A , +5.0V/...
CLAYPOWER
200W , 100 ~ 240V Input, Output: +3.3V/20.0A , +5.0V/20.0A , +12.0V/8.0A ,...
CLAYPOWER
Clay Power CP-05030 300W , 100 ~ 240V Input, Output: +3.3V/22.0A , +5.0V/...
CLAYPOWER
Clay Power CP-05040 400W , 100 ~ 240V Input, Output: +3.3V/27.0A , +5.0V/...
CLAYPOWER
Clay Power CP-08040 Power Supply with 400W, 100 ~ 240V Input, Output: +3.3...

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on Elite.Parts are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

Elite.Parts is a GID Industrial website.
GID Industrial Logo
Copyright © 2021 GID Industrial, All Rights Reserved.
Page generated in 0.062 seconds.