Manufacturers
CLAYPOWER CP-04050
Description
Claypower CP-04050 Power Supply - CP-04050 500W 40.0A 50.0A 32.0A 1.0A 3.0A 2.0A
Part Number
CP-04050
Price
Request Quote
Manufacturer
CLAYPOWER
Lead Time
Request Quote
Category
PS2 POWER SUPPLY
Specifications
Type
CP-04050 500W 40.0A 50.0A 32.0A 1.0A 3.0A 2.0A
Datasheet
Extracted Text
PS2 CP-04050 1.Input Characteristics: 1.1 Input Voltage Range -------------------90To264Vac Full Range, With Active PFC,PF=90%Min 1.2 Input Frequency Range ---------------47Hz To 63Hz. 1.3 Input Ac Current ( Max ) --------------10A Max. @115Vac, 5A Max. @230Vac Full Load. 1.4 Inrush Current ---------------------------At 132Vac / 264Vac, Full Load Condition, No Damage Occur. Input Fuse Shall Not Blow. 1.5 Efficiency ----------------------------------70% Min, At Nominal Line Input Full Load. 1.6 Input Leakage Current ----------------Leakage Current From Line to Ground Will Be Less 3.5mA rms. Measurement Will Be Made At 240Vac/60Hz. 2.Output Characteristics: 2.1 Static Output Characteristics. Output Load Range Regulation Ripple Max Ripple & Noise Voltage Min. Max. Min. Max. mV P-P Max. mV P-P 1. +3.3 V 0.2 A 40.0 A - 5 % + 5 % 50 mV 100 mV 2. +5.0 V 2.5 A 50.0 A - 5 % + 5 % 50 mV 100 mV 3. +12.0 V 0.5 A 32.0 A - 5 % + 5 % 100 mV 150 mV 4. -5.0 V 0.0 A 1.0 A - 10 % + 10 % 150 mV 200 mV 5. -12.0 V 0.0 A 3.0 A - 10 % + 10 % 150 mV 200 mV 6. SB +5.0 V 0.0 A 2.0 A - 5 % + 5 % 100 mV 100 mV Note: 1. Noise Test ----- Noise Bandwidth Is From Dc To 20MHz. 2. Ripple Frequencies Greater Than 1 MHz Shall Be Attenuated By the Measurement System. 3. Add 0.1uF / 10uF Capacitor At Output Connector Terminals For Ripple & Noise Measurements. 4. Combined Total Power From +3.3V And +5V Rails Shall Not Execeed 250W. 5. The Total Output Power Shall Not Exceed 500W. 2.2 Dynamic Output Characteristics: 2.2.1 Initial Delay Time ----- 35mS Max. At Nominal Line Full Load. 2.2.2 Rise Time ---- 100 mS Max. At Nominal Line Full Load. 2.2.3 Turn-on Delay Time ----- 600mS Max. At Nominal Line Full Load. 2.2.4 Hold-up Time ----- 20mS Max. For + 5V Output At Nominal Line Full Load. 2 2.2.5 Transient Overshoot ----- 10% Max. Of Delay State After Load Change Of 25% Within The Range Of 50% To 100% Of Full Load. 2.2.6 Temperature Coefficient ----- 0.03% Per °C Max. 3.Protections: 3.1 Over Voltage Protection --- Standard On +3.3V Output Set At 4.10Vdc At +/-0.40Vdc. +5.0V Output Set At 6.25Vdc At +/-0.75Vdc. +12.0V Output Set At 14.6Vdc At +/-1.0Vdc. 3.2 Short Circuit Protection --- A Short Circuit Placed Between Dc Return And Output Shall Cause No Damage And The Power Supply Shall Shutdown. 3.3 Over Power Protection --- The Power Supply Can Use Electronic Circuit To Limit The Output. Power Against Excessing +150% Of Full Load. Or Protected against Excessive Power Delivery Due To Short Circuit Of Any Output Or Over Total Power. 3.4 No load Operation --- No Parts Damaged On Power Supply. 4.Dielectric Withstand Voltage: 4.1 Primary to Secondary --- 1500Vac For 1 Minute. Or 1800Vac For 1 Sec. 4.2 Primary to Safety Ground --- 1500Vac For 1 Minute. Or 1800Vac For 1 Sec. 4.3 Insulation Resistance --- Primary To Safety Ground - 500Vdc, 50M ohms Min. 5.ELECTROMAGNETIC COMPATIBILITY 5.1 Electromagnetic Interference (EMI) : a.FCC Part 15,subject j, class B. b.EN55022 (CISPR 22), class B. c.VCCI Class “ 2 “. 5.2 Electrostatic Discharge (ESD) / 8KV : Comply with IEC 801-2 (1984). 5.3 Radio-Frequency Electromagnetic Field (RS) : Comply with IEC 801-3 (1984). 5.4 Harmonics Current : Comply with EN61000-3-2. 5.5 Fast Transient Burst (EFT) / 2KV : Comply with IEC 801-4 (1988). 3 6.Product Safety: This Power Supply Is Designed Can Meet The Following Spec. 6.1 UL/CUL ------------------------------------------------ UL60950 6.2 TUV --------------------------------------------- EN 60950 7.Environment: 7.1 Operation Temperature -------------------- Air Temperature 0 °C To 50 °C. 7.2 Operation Relative Humidity ------------- 20% To 90%. 7.3 Storage Temperature ----------------------- Air Temperature -20 °C To 60 °C. 7.4 Storage Relative Humidity ---------------- 5% To 95%. 7.5 Altitude ----------------------------------------- Operate Properly At Any Altitude Between 0 To 100,000 Feet. Storage 40,000 Feet. 7.6 Vibration --------------------------------------- 0.38mm. 5-55-5Hz, 1 Minutes Per Cycle; 30 Minutes For Each Axis ( X,Y,Z ). 8.Burn-In 8.1 Burn-In ------------------------------------------ At 45 C, Max. Load, 4 Hours. ° 9.Mean Time Between Failure --------------------- 50 KHrs Minimum At Full Load For 25 °C Ambient Temperature. 10.Power-Good Signal: +4.75V +4.75V Ts -> +5V Output Power Good Signal <- Tr -> <- Td -> -> T1 <- Note: Tr ≤ 100 ms, T1 ≥ 1 ms, Td = 100 - 500 ms. 11.Dimension 11.1 W x H x D --------------------------------------- 150.0 x 86.0 x 140.0 ( mm ) 4 I O Note: See The Mechanical Drawing. 621001 442100 612110 735240 713200 611300 CLAY POWER COMPANY CP-04050 K,Y BURNIN BURNIN OK Q.C. PASSED
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the CP-04050 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods