TS117 Multifunction Telecom Switch Description TS117 Units TS117 is a 350V, 120mA, 35Ω 1-Form-A relay with an Load Voltage 350 V optocoupler in a single package. It provides high sensitiv- Load Current 120 mA ity and is an ideal solution for many telecom applications. Max R 35 Ω ON Current limiting version is available ("L" suffix). Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability Approvals • Arc-Free With No Snubbing Circuits • UL Recognized: File Number E76270 • 3750V Input/Output Isolation • CSA Certified: File Number LR 43639-10 RMS • FCC Compatible • BSI Certified: • VDE Compatible • BS EN 60950:1992 (BS7002:1992) • No EMI/RFI Generation Certificate #:7344 • Machine Insertable, Wave Solderable • BS EN 41003:1993 • Surface Mount and Tape & Reel Versions Available Certificate #:7344 Applications Ordering Information • Telecommunications Part # Description • Telecom Switching TS117 8 Pin DIP (50/Tube) • Tip/Ring Circuits TS117P 8 Pin Flatpack (50/Tube) • Modem Switching (Laptop, Notebook, Pocket Size) TS117PTR 8 Pin Flatpack T&R (1000/Reel) • Hookswitch TS117S 8 Pin Surface Mount (50/Tube) • Dial Pulsing TS117STR 8 Pin Surface Mount T&R (1000/Reel) • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition Pin Configuration • Electronic Switching TS117/TS117L Pinout • I/O Subsystems 1 8 • Meters (Watt-Hour, Water, Gas) + LED - Relay Load - Relay (MOSFET Output) • Medical Equipment-Patient/Equipment Isolation 2 7 – LED - Relay Load - Relay (MOSFET Output) • Security 3 6 Collector - Phototransistor LED - Phototransistor –/+ • Aerospace 4 5 Emitter - Phototransistor LED - Phototransistor +/– • Industrial Controls DS-TS117-R9 1 www.clare.com TS117 Absolute Maximum Ratings (@ 25˚ C) Absolute Maximum Ratings are stress ratings. Stresses Parameter Min Typ Max Units in excess of these ratings can cause permanent damage 1 Input Power Dissipation - - 150 mW to the device. Functional operation of the device at these Input Control Current - - 50 mA or any other conditions beyond those indicated in the Peak (10ms) - - 1 A operational sections of this data sheet is not implied. Reverse Input Voltage - - 5 V Exposure of the device to the absolute maximum ratings 2 Total Power Dissipation - - 800 mW for an extended period may degrade the device and effect Isolation Voltage its reliability. Input to Output 3750 - - V RMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C Soldering Temperature DIP Package - - +260 °C Flatpack/Surface Mount Package - - +220 °C (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units Relay Portion (Pins 7, 8) Output Characteristics @ 25°C Load Voltage (Peak) - V - - 350 V L Load Current (Continuous) - I - - 120 mA L Peak Load Current 10ms I - - 350 mA LPK On-Resistance I=120mA R -23 35 Ω L ON Off-State Leakage Current V =350V I -- 1 µA L LEAK Switching Speeds Turn-On I =5mA, V =10V T - - 3.0 ms F L ON Turn-Off I =5mA, V =10V T - - 3.0 ms F L OFF Output Capacitance 50V; f=1MHz C -25 - pF OUT Load Current Limit I -- - mA CL Relay Portion (Pins 1, 2) Input Characteristics @ 25°C Input Control Current I =120mA I 2- 50 mA L F Input Dropout Current - I 0.4 0.7 - mA F Input Voltage Drop I =5mA V 0.9 1.2 1.4 V F F Reverse Input Voltage - V -- 5 V R Reverse Input Current V =5V I - - 10 µA R R Rev. 9 2 www.clare.com TS117 Electrical Characteristics (Continued) Parameter Conditions Symbol Min Typ Max Units Detector Portion (Pins 3,4) Output Characteristics @ 25°C Phototransistor Blocking Voltage I =10µA BV 20 50 - V C CEO Phototransistor Output Current V =5V, I =0mA I - 50 500 nA CE F CEO Saturation Voltage IC=2mA, I =16mA V - 0.3 0.5 V F SAT Current Transfer Ratio I =6mA, V =0.5V CTR 33 100 - % F CE Detector Portion (Pins 5,6) Input Characteristics @ 25°C Input Control Current I =2mA, V =0.5V I 6 2 100 mA C CE F Input Voltage Drop IF=5mA V 0.9 1.2 1.4 V F Input Current I =1µA, V =5V I 525 - µA C CE F (Detector must be off) Input to Output Capacitance (Relay Only) - C -3 - pF I/O Capacitance Input to Output - - - - - pF Input to Output Isolation - V 3750 - - V I/O RMS Rev. 9 www.clare.com 3 TS117 PERFORMANCE DATA* TS117 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) TS117 TS117 (Load: Voltage = 350VDC; Current = 120mADC; Typical LED Forward Voltage Drop Typical Blocking Voltage Distribution I = 2mADC) (N=50 Ambient Temperature = 25°C; I = 5mADC) (N=50 Ambient Temperature = 25°C) F F 35 35 35 30 30 30 25 25 25 20 20 20 15 15 15 10 10 10 5 5 5 0 0 0 1.17 1.19 1.21 1.23 1.25 18.75 19.85 20.95 22.05 23.15 24.25 25.35 377.5 388.5 399.5 410.5 421.5 432.5 443.5 LED Forward Voltage Drop (V) On-Resistance (Ω) Blocking Voltage (V) TS117 TS117 TS117 Typical I for Switch Operation Typical I for Switch Dropout Typical Turn-On Time F F (N=50 Ambient Temperature = 25°C) (N=50 Ambient Temperature = 25°C) (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC) (Load Current = 120mADC) (Load Current = 120mADC; I = 2mADC) F 25 25 25 20 20 20 15 15 15 10 10 10 5 5 5 0 0 0 0.39 0.65 0.91 1.17 1.43 1.69 1.95 0.15 0.45 0.75 1.05 1.35 1.65 1.95 0.39 0.65 0.91 1.17 1.43 1.69 1.95 LED Current (mA) LED Current (mA) Turn-On (ms) TS117 Typical Turn-Off Time TS117 (N=50 Ambient Temperature = 25°C) TS117 Typical Leakage vs. Temperature (Load Current = 120mADC; I = 2mADC) Typical Load Current vs. Temperature (Measured across Pins 7 & 8) F 25 180 0.016 160 0.014 20 140 0.012 120 0.010 15 100 0.008 80 10 0.006 60 0.004 40 5 0.002 20 0 0 0 0.035 0.105 0.175 0.245 0.315 0.385 0.455 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 Turn-Off (ms) Temperature (°C) Temperature (°C) TS117 TS117 TS117 Typical Blocking Voltage Typical Turn-On vs. Temperature Typical Turn-Off vs. Temperature vs. Temperature (Load Current = 120mADC) (Load Current = 120mADC) 5.000 1.000 430 4.500 0.900 425 2mA 4.000 0.800 420 3.500 0.700 3.000 0.600 415 2mA 0.500 2.500 410 0.400 2.000 5mA 0.300 1.500 405 10mA 0.200 1.000 400 0.500 0.100 20mA 5mA 0 0 395 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 9 4 www.clare.com 20mA 10mA 5mA Blocking Voltage (V ) RMS Device Count (N) Device Count (N) Device Count (N) Turn-On (ms) Load Current (mA) Device Count (N) Device Count (N) Turn-Off (ms) Leakage (μA) Device Count (N) Device Count (N) TS117 PERFORMANCE DATA* TS117 TS117 TS117 Typical Turn-Off vs. LED Forward Current Typical LED Forward Voltage Drop Typical Turn-On vs. LED Forward Current (Load Current = 120mADC) vs. Temperature (Load Current = 120mADC) 1.8 2.0 0.7 1.8 0.6 1.6 1.6 0.5 1.4 1.4 1.2 0.4 1.0 0.3 0.8 1.2 0.6 0.2 1.0 0.4 0.1 0.2 0.8 0 0 -40 -20 0 20 40 60 80 100 120 0 5 1015202530354045 50 0 5 1015202530354045 50 Temperature (°C) LED Forward Current (mA) LED Forward Current (mA) TS117 TS117 TS117 Typical I for Switch Dropout Typical I for Switch Operation F F Typical On-Resistance vs. Temperature vs. Temperature vs. Temperature (Load Current = 120mADC; I = 2mADC) (Load Current = 120mADC) (Load Current = 120mADC) F 60 3.000 3.000 50 2.500 2.500 40 2.000 2.000 30 1.500 1.500 20 1.000 1.000 10 0.500 0.500 0 0 0 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) Temperature (°C) TS117 TS117 Typical Load Current vs. Load Voltage TS117 Typical Normalized CTR vs Forward Current (Ambient Temperature = 25°C; I = 2mA) Energy Rating Curve (V = 0.5V) CE F 150 1.0 4.5 0.9 4.0 100 0.8 3.5 0.7 50 3.0 0.6 2.5 0 0.5 2.0 0.4 -50 1.5 0.3 0.2 1.0 -100 0.1 0.5 0 -150 0 10μs 100μs 1ms 10ms 100ms 10s 100s -3 -2 -1 0 1 2 3 1s 0 2 4 6 8 10 12 14 16 18 20 Load Voltage (V) Time I (mA) F TS117 TS117 Typical Normalized CTR vs. Temperature Typical Collector Current vs. Forward Current (V = 0.5V) CE (V = 0.5V) CE 8 12 7 10 6 8 5 4 6 3 4 2 2 1 0 0 -40 -20 0 20 40 60 80 100 120 0 2468 10 12 14 16 18 20 Temperature (°C) I (mA) F *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 9 www.clare.com 5 50mA 30mA 20mA 10mA 5mA 1mA 2mA 5mA 10mA 15mA 20mA Load Current (mA) LED Forward Voltage Drop (V) On-Resistance (Ω) Normalized CTR (%) LED Current (mA) I (mA) C Turn-On (ms) Load Current (A) LED Current (mA) Turn-Off (ms) Normalized CTR (%) TS117 Mechanical Dimensions 8 Pin DIP Through Hole (Standard) 9.652 ± .381 PC Board Pattern (.380 ± .015) (Top View) 2.540 ± .127 2.540 ± .127 8-.800 DIA. (.100 ± .005) (.100 ± .005) 7.620 ± .254 (8-.031 DIA.) (.300 ± .010) 7.620 ± .127 3.302 9.144 ± .508 6.350 ± .127 6.350 ± .127 (.300 ± .005) (.130) (.360 ± .020) (.250 ± .005) (.250 ± .005) 7.239 TYP. (.285) 9.144 TYP. (.360) .457 ± .076 7.620 ± .127 (.018 ± .003) (.300 ± .005) 8.077 ± .127 (.318 ± .005 ) 9.652 ± .381 8 Pin DIP Surface Mount (“S” Suffix) PC Board Pattern (.380 ± .015) (Top View) 2.540 ± .127 2.540 ± .127 (.100 ± .005) (.100 ± .005) 7.620 ± .254 (.300 ± .010) 9.525 ± .254 4.445 ± .127 3.302 6.350 ± .127 8.305 ± .127 (.130) (.375 ± .010) (.175 ± .005) (.250 ± .005) (.327 ± .005) 1.905 ± .127 .635 TYP. (.075 ± .005) (.025) .254 TYP. (.010) .457 ± .076 1.498 ± .127 (.018 ± .003) (.059 ± .005) 8.077 ± .127 (.318 ± .005) 8 Pin Flatpack (“P” Suffix) 9.652 ± .381 PC Board Pattern (.380 ± .015) (Top View) 2.540 ± .127 (.100 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 2.159 TYP. (.300 ± .010) (.085) 6.350 ± .127 9.398 ± .127 (.250 ± .005) (.370 ± .005) 2.286 MAX. .203 8.763 ± .127 (.008) (.090) .635 ± .127 (.345 ± .005) (.025) 1.193 .457 ± .076 (.047) (.018 ± .003) 8.077 ± .127 .787 (.318 ± .005) (.031) Dimensions mm (inches) Rev. 9 6 www.clare.com TS117 Mechanical Dimensions Tape and Reel Packaging for 8 Pin Surface Mount Package 2.007 ± .102 1.498 ± .102 3.987 ± .102 330.2 DIA. 6.731 MAX. (.079 ± .004) (.059 ± .004) (.157 ± .004) (13.00) 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) Top Cover Tape Thickness .102 MAX. 7.493 ± .102 16.002 ± .305 (.004) (.295 ± .004) 18 (.630 ± .012) 12.090 10.300 (.476) (.405) 4.877 (.192) Top Cover .050R TYP. 11.989 ± .102 10.300 ± .102 1.549 ± .102 Embossed Carrier Tape (.472 ± .004) (.405 ± .004) (.061 ± .004) User Direction of Feed Embossment Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. 2.007 ± .102 1.498 ± .102 3.987 ± .102 (13.00) 6.731 MAX. (.079 ± .004) (.059 ± .004) (.157 ± .004) 1.753 ± 0.102 (.265) (.069 ± .004) .406 MAX. (.016) Top Cover Tape Thickness 7.493 ± .102 16.002 ± .305 .102 MAX. (.295 ± .004) 18 (.004) (.630 ± .012) 12.090 10.287 (.476) (.405) 4.877 (.192) Top Cover Embossed Carrier .050R TYP. 11.988 ± .102 10.287 ± .102 1.549 ± .102 Tape (.472 ± .004) (.405 ± .004) (.061 ± .004) Embossment User Direction of Feed Dimensions mm (inches) Rev. 9 www.clare.com 7 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup- port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-TS117-R9.0 ©Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 6/25/02