Manufacturers
CISCO SYSTEMS PWR-400W-DC
Description
Cisco PWR-400W-DC DC Power Supply for ME 600 Series Ethernet Switch
Part Number
PWR-400W-DC
Price
Request Quote
Manufacturer
CISCO SYSTEMS
Lead Time
Request Quote
Category
SYSTEMS
Datasheet
Extracted Text
+ - OUTPUT INPUT FAN OK OK OK APPENDI X A Power Supply Specifications This appendix provides the specifications for the Cisco ME 6500 series Ethernet switch power supplies. Two power supply models are available: • 400 W DC-Input Power Supply, page A-1 400 W AC-Input Power Supply, page A-3 Note The ME6524 switches support mixing AC-input and DC-input power supplies in the same chassis. 400 W DC-Input Power Supply Figure A-1 shows the 400 W DC-input power supply (PWR-400W-DC) with the major features identified. Figure A-1 400 W DC-Input Power Supply (PWR-400W-DC) 2 3 4 1 o 7 8 5 6 1 Captive installation screw 5 Power supply fan 2 Power on/off switch 6 Status LEDs 3 EMI gasket 7 Terminal block 4 Captive installation screw 8 Terminal block cover Cisco ME 6500 Series Ethernet Switch Installation Guide OL-8900-03 A-1 144975 Appendix A Power Supply Specifications 400 W DC-Input Power Supply Table A-1 lists the specifications for the 400 W DC-input power supply (PWR-400W-DC). Table A-1 400 W DC-Input Power Supply Specifications Item Specification DC-input voltage–48 VDC @ 37 A for nominal –48 V battery backup system (operating range: –40.5 VDC to –56 VDC) –60 VDC @ 29 A for nominal –60 V battery backup system (operating range: –55 VDC to –72 VDC) DC-input current11 A @ -48 VDC 9A @ -60 VDC Power supply output capacity 400 W maximum Power supply output 34 A @ +11.75 V Output holdup time 4 ms Heat dissipation 133.33 W per hour (454.92 BTU per hour) Front panel LEDs INPUT OKGreen—The source DC voltage is OK. (-38.25 VDC or greater.) Off—The source DC voltage has dropped below -33 VDC or is not present. Note In dual power supply configurations with the alternate power supply powered up, the INPUT OK LED may be lit red to indicate that the DC input voltage is less than -33 VDC or that the power supply is switched off. FAN OKGreen—The power supply fan is operating properly. Red—A power supply fan failure is detected. OUTPUT OKRed—A problem with the DC-output voltage from the power supply is detected. Green—The DC-output voltage is within acceptable margins. Weight 4.41 lb (2.0 kg) Cisco ME 6500 Series Ethernet Switch Installation Guide A-2 OL-8900-03 + - OUTPUT INPUT FAN OK OK OK Appendix A Power Supply Specifications 400 W AC-Input Power Supply 400 W AC-Input Power Supply Figure A-2 shows the 400 W AC-input power supply (PWR-400W-AC) with the major features identified. Figure A-2 AC-Input Power Supply (PWR-400W-AC) 2 3 4 1 o 7 5 6 1 Captive installation screw 5 Power supply fan 2 Power on/off switch 6 Status LEDs 3 EMI gasket 7 AC in receptacle (IEC60320 C15) 4 Captive installation screw Table A-2 lists the specifications for the 400 W AC-input power supply (PWR-400W-AC). Table A-2 400 W AC-Input Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC) Power factor correction (PFC) reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components. AC-input voltageLow-line (120 VAC nominal)—85 VAC (min) to 132 VAC (max) High-line (230 VAC nominal)—170 VAC (min) to 264 VAC (max) AC-input current 5 A AC-input frequency 50/60 Hz (nominal) (±3% for full range) Cisco ME 6500 Series Ethernet Switch Installation Guide OL-8900-03 A-3 187291 Appendix A Power Supply Specifications 400 W AC-Input Power Supply Table A-2 400 W AC-Input Power Supply Specifications (continued) Specification Description Branch circuit requirement Each chassis power supply should have its own dedicated, fused-branch circuit: For North America—10 A For International—Circuits sized to local and national codes All AC power supply inputs are fully isolated. – Source AC can be out of phase between multiple power supplies in the same chassis, which means that PS1 can be operating from phase A and PS2 can be operating from phase B. – For high-line operation, the power supply operates with the hot conductor wired to a source AC phase and the neutral conductor wired either to ground or to another source AC phase as long as the net input voltage is in the range of 170 to 264 VAC. Power supply output 34.00 A @ +12 VDC Output holdup time 10 ms minimum Front panel LEDs INPUT OKGreen—Source AC voltage is OK. (Input voltage is 82 VAC or greater.) Red—Source AC voltage is less than 73 VAC (±3 VAC) Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. Note In chassis equipped with dual power supplies, if one power supply is powered on and the other power supply is powered off, the INPUT OK LED is lit red rather than unlit on the power supply that is powered off. FAN OKGreen—Power supply fan is operating properly. Red—Power supply fan failure is detected. Off—Power supply is powered off. Note In chassis equipped with dual power supplies, if one power supply is powered on and the other power supply is powered off, the FAN OK LED is lit red rather than unlit on the power supply that is powered off. OUTPUT OK Green—The 12 VDC output is within margins. Red—The 12 VDC output is out of tolerance (less than 11.15 VDC or more than 13.10 VDC). Off—The power supply is off. Note In chassis equipped with dual power supplies, if one power supply is powered on and the other power supply is powered off, the OUTPUT OK LED is lit red rather than unlit on the power supply that is powered off. Weight 4.41 lb (2 kg) Cisco ME 6500 Series Ethernet Switch Installation Guide A-4 OL-8900-03 Appendix A Power Supply Specifications 400 W AC-Input Power Supply 400 W Power Supply AC Power Cords Table A-3 lists the specifications for the AC power cords that are available for the 400 W AC-input power supply. The table includes references to power cord illustrations. Note All 400 W power supply power cords have an IEC60320/C13 appliance plug at one end. Table A-3 400 W AC-input Power Supply Power Cords Locale Power Cord AC Source Plug Type Cordset Rating Power Cord Part Number Reference Illustration Argentina CAB-ACR IRAM 2073 10 A, 250 VAC Figure A-3 Australia, New Zealand CAB-ACA SAA AS 3112 10 A, 250 VAC Figure A-4 People’s Republic of China CP-PWR-CORD-CN GB16C 10 A, 250 VAC Figure A-5 Italy CAB-ACI CEI 23-16/7 10 A, 250 VAC Figure A-6 Continental Europe CAB-ACE CEE 7/7 10 A, 250 VAC Figure A-7 North America CAB-AC-125V/13A NEMA 5-15P 13 A, 125 VAC Figure A-8 North America CAB-AC-250V/13A NEMA 6-20P 13 A, 250 VAC Figure A-9 1 United Kingdom CAB-ACU BS 1363 10 A, 250 VAC Figure A-10 Japan CP-PWR-CORD-JP JIS C8303 12 A, 125 VAC Figure A-11 Switzerland CAB-ACS IEC 60884-1 10 A, 250 VAC Figure A-12 1. Plug contains a 13 A fuse. Figure A-3 CAB-ACR (Argentina) Power Cord Cordset rating: 10 A, 250 V Length: 8 ft. 2 in. (2.5 m) Plug: IRAM 2073 Connector: IEC 60320 C13 Cisco ME 6500 Series Ethernet Switch Installation Guide OL-8900-03 A-5 276816 Appendix A Power Supply Specifications 400 W AC-Input Power Supply Figure A-4 CAB-ACA (Australia and New Zealand) Power Cord Cordset rating: 10A, 250V Length: 8 ft. 2 in. (2.5 m) Plug: SAA AS 3112 Connector: IEC 60320 C13 Figure A-5 CP-PWR-CORD-CN (People’s Republic of China) Power Cord Cordset rating: 10A, 250V Length: 8 ft 2 in. (2.5 m) Plug: GB16C Connector: IEC 60320 C13 Figure A-6 CAB-ACI (Italy) Power Cord Cordset rating: 10A, 250V Length: 8 ft. 2 in. (2.5 m) Plug: CEI 23-16/7 Connector: IEC 60320 C13 Cisco ME 6500 Series Ethernet Switch Installation Guide A-6 OL-8900-03 276817 276818 276819 Appendix A Power Supply Specifications 400 W AC-Input Power Supply Figure A-7 CAB-ACE (Continental Europe) Power Cord Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: CEE 7/7 Connector: IEC 60320 C13 Figure A-8 CAB-AC-125V/13A(North America) Power Cord Cordset rating: 13 A, 125 V Plug: NEMA 5-15 Length: 6 ft. 7 in. (2 m) Connector: IEC 60320 C13 Figure A-9 CAB-AC-250V/13A(North America) Power Cord Cordset rating 13A, 250V (6.6 feet) (79±2m) Connector: Plug: EL 701 EL312MoldedTwistlock (IEC60320/C13) (NEMA L6-20) Cisco ME 6500 Series Ethernet Switch Installation Guide OL-8900-03 A-7 276821 186568 276820 Appendix A Power Supply Specifications 400 W AC-Input Power Supply Figure A-10 CAB-ACU (United Kingdom) Power Cord 13A Cordset rating: 10 A, 250 V fuse Length: 8 ft. 2 in. (2.5 m Connector: IEC 60320 C13 Plug: BS 1363 Figure A-11 CP-PWR-CORD-JP (Japan) Power Cord Cordset rating: 12A, 125V Length: 7 ft. 11 in. (2.4 m) Plug: JIS C8303 Connector: IEC 60320 C13 Figure A-12 CAB-ACS (Switzerland) Power Cord Cordset rating: 10 A, 250 V Length: 8 ft. 2 in. (2.5 m) Plug: SEV 1011 Connector: IEC 60320 C13 Cisco ME 6500 Series Ethernet Switch Installation Guide A-8 OL-8900-03 276825 276823 276824
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PWR-400W-DC have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods