Programmable DC Power Source MODEL 62120 Series Key Features: 10 models available for selection 3 phase, 208VAC input Digital encoder knobs,keypad and function keys Power Factor Correction (PFC) Embedded controller for front panel sequencing 16-bit digital processing LabView drivers Constant Power mode 10 store/recall locations and 99 step sequencing Remote sence, 5V line loss compen- sation Isolated analog programming Optional IEEE-488.2 GPIB control with SCPI and RS-232 standard Programmable DC Power interface OVP, current limit, thermal protection Source 62120 Series-12KW UL, CSA, CE approved Chroma 62120 Series of various output pro- There are 100 user programmable input status grammable DC power supplies are designed on the front panel for automated test applica- for use in ATE, burn-in, plating, and other high tions. In addition a 16-bit digital control with power systems for a broad range of Test & bright vacuum fluorescent display readout, bar Measurement applications. graphs and status indicators is equipped for the real time measurement of voltage and cur- The 62120 Series of constant voltage, con- rent. stant current power supplies are available in power ranges 12KW. All models have 10-turn The 62120 Series DC Power Sources are very voltage and current controls that vary the volt- easy to operate either from the front panel key- age (10V~600V) and current (20A~1200A) pad or from the remote controller via GPIB outputs from zero to the maximum rated val- (optional) and RS-232 & APG (standard). Its ues. The operation of crossover from constant compact size with 10.37" only can be stacked voltage constant current occurs automatically on a bench in a standard rack without any diffi- when the load current exceeds the control set- culty. ting. Also the provided adjustable current limit allows you to set the current limit without short- For quality and safety, the entire series of circuiting the output. Model 62120 Programmable DC Power Sources are CSA, UL, and CE approved with All 62120 Series Programmable DC Power standard over voltage protection (OVP) and Sources have incorporated modern power fac- thermal shutdown functions built-in; conse- tor correction circuitry to increase the input quently make each of them a reliable instru- power factor more than 0.95 to meet the IEC ment for components testing as well as new regulation that not only reduces the input cur- products development. rent requirement but also raises the efficiency over 85%. RS-232C GPIB APG PFC SPECIFICATIONS : Model 62120-1062120-2062120-3062120-4062120-6062120-8062120-10062120-15062120-30062120-600 Output Ratings 1 Output Voltage 0-10V 0-20V 0-30V 0-40V 0-60V 0-80V 0-100V 0-150V 0-300V 0-600V 2 Output Current 0-1200A 0-600A 0-400A 0-300A 0-200A 0-150A 0-120A 0-80A 0-40A 0-20A Output Power 12000W 12000W 12000W 12000W 12000W 12000W 12000W 12000W 12000W 12000W 3 Line Regulation Voltage (0.01% of Vmax) 1 mV 2 mV 3 mV 4 mV 6 mV 8 mV 10 mV 15 mV 30 mV 60 mV Current (0.1% of Imax) 1200 mA 600 mA 400 mA 300 mA 200 mA 150 mA 120 mA 80 mA 40 mA 20 mA 4 Load Regulation Voltage (0.05% of Vmax+5mV) 10 mV 15 mV 20 mV 25 mV 35 mV 45 mV 55 mV 80 mV 155 mV 305 mV Current (0.2% of Imax+40mA) 2440 mA 1240 mA 840 mA 640 mA 440 mA 340 mA 280 mA 200 mA 120 mA 80 mA Meter Accuracy Voltage (0.15% of Vmax) 15 mV 30 mV 45 mV 60 mV 90 mV 120 mV 150 mV 225 mV 450 mV 900 mV Current (0.5% of Imax) 6000 mA 3000 mA 2000 mA 1500 mA 1000 mA 750 mA 600 mA 400 mA 200 mA 100 mA Output Noise & Ripple P-P (20MHz) 75 mV 75 mV 75 mV 75 mV 100 mV 100 mV 100 mV 150 mV 250 mV 350 mV rms (Voltage) 10 mV 10 mV 12 mV 15 mV 15 mV 15 mV 20 mV 20 mV 30 mV 80 mV rms (Current5) 6200 mA 3200 mA 2000 mA 1500 mA 900 mA 640 mA 460 mA 240 mA 100 mA 50 mA OVP Adjustment Range: (5% to 103% of Vmax) 0.5-10.3 V 1-20.6 V 1.5-30.9 V 2-41.2 V 3-61.8 V 4-82.4V 5-103 V 7.5-154.5 V 15-309 V 30-618 V 6 Efficiency 85% 87% 87% 87% 89% 89% 90% 90% 91% 91% 7 Stability (30 minutes) Voltage (0.04% of Vmax) 4 mV 8 mV 12 mV 16 mV 24 mV 32 mV 40 mV 60 mV 120 mV 240 mV Current (0.6% of Imax) 7200 mA 3600 mA 2400 mA 1800 mA 1200 mA 900 mA 720 mA 480 mA 240 mA 120 mA 8 Stability (8 hours) Voltage (0.02% of Vmax) 2 mV 4 mV 6 mV 8 mV 12 mV 16 mV 20 mV 30 mV 60 mV 120 mV Current (0.04% of Imax) 480 mA 240 mA 160 mA 120 mA 80 mA 60 mA 48 mA 32 mA 16 mA 8 mA 9 Temperature Coefficient 0 Voltage (0.04% of Vmax/ C) 4 mV 8 mV 12 mV 16 mV 24 mV 32 mV 40 mV 60 mV 120 mV 240mV 0 Current (0.06% of Imax/ C) 720 mA 360 mA 240 mA 180 mA 120 mA 90 mA 72 mA 48 mA 24 mA 12 mA Program Resolution Voltage (0.002% of Vmax) 0.2 mV 0.4 mV 0.6 mV 0.8 mV 1.2 mV 1.6 mV 2 mV 3 mV 6 mV 12 mV Current (0.002% of Imax) 24 mA 12 mA 8 mA 6 mA 4 mA 3 mA 2.4 mA 1.6 mA 0.8 mA 0.4 mA OVP (0.002% of Vmax) 0.2 mV 0.4 mV 0.6 mV 0.8 mV 1.2 mV 1.6 mV 2 mV 3 mV 6 mV 12 mV Program Accuracy Voltage (0.1% of Vmax) 10 mV 20 mV 30 mV 40 mV 60 mV 80 mV 100 mV 150 mV 300 mV 600 mV Current (0.5% of Imax) 6000 mA 3000 mA 2000 mA 1500 mA 1000 mA 750 mA 600 mA 400 mA 200 mA 100 mA OVP (0.1% of Vmax) 10 mV 20 mV 30 mV 40 mV 60 mV 80 mV 100 mV 150 mV 300 mV 600 mV Readback Resolution Voltage (0.002% of Vmax) 0.2 mV 0.4 mV 0.6 mV 0.8 mV 1.2 mV 1.6 mV 2 mV 3 mV 6 mV 12 mV Current (0.002% of Imax) 24 mA 12 mA 8 mA 6 mA 4 mA 3 mA 2.4 mA 1.6 mA 0.8 mA 0.4 mA Readback Accuracy Voltage (0.15% of Vmax) 15 mV 30 mV 45 mV 60 mV 90 mV 120 mV 150 mV 225 mV 450 mV 900 mV Current (0.5% of Imax) 6000 mA 3000 mA 2000 mA 1500 mA 1000 mA 750 mA 600 mA 400 mA 200 mA 100 mA All specifications are subject to change without notice. Notes: General Specifications : 1. Minimum output voltage is <0.15% of rate voltage at zero output setting. Operational AC Input Voltage : 190-242 Vac 3phase (47-63Hz) (standard) 2. Minimum output current is<0.2% of rate current at zero output setting when measured with rated load resistance. 342-500 Vac 3phase (47-63Hz) (optional) 3. For input voltage variation over the AC input voltage range with constant rated load. Dimension Size (WxHxD) : 482.6x263.4x602.7 mm 4. For 0-100% load variation with constant nominal line voltage. 0 0 Operating Temperature Rage : 0 C ~ 50 C 5. Current mode noise is measured from 10% to 100% of rated output voltage, full current.unit in CC mode 0 0 6. Typical efficiency at nominal input voltage and full output power. Storage Temperature Rage : -40 C ~ +85 C 7. Maximum drift over 30 minutes with constant line,load ,and temperature after power on. Transient Response Time : 20 ms (voltage mode) 8. Maximum drift over 8 hours with constant line,load ,and temperature after 30 minute warm-up. Maximum Remote Sense Line Drop Compensation : 5V/line 0 9. Change in output per C change in ambient temperature with constant line and load. Remote on/off and interlock : 4 to 15V signal or TTL-compatible input Remote Analog Programming : Voltage and current programming inputs 0-5V, Ordering Information: 62120-10 Programmable DC Power Source 10V/1200A/12KW 0-10V(default) voltage sources,Input galvani 62120-20 Programmable DC Power Source 20V/600A/12KW cally isolated from supply output. 62120-30 Programmable DC Power Source 30V/400A/12KW Remote Analog Monitoring : Voltage and current monitor outputs 0-5V, 0- 62120-40 Programmable DC Power Source 40V/300A/12KW 10V(default) ranges for 0 to 100% of output, 62120-60 Programmable DC Power Source 60V/200A/12KW galvanically isolated from supply output. 62120-80 Programmable DC Power Source 80V/150A/12KW 62120-100 Programmable DC Power Source 100V/120A/12KW Remote Programming and Monitoring Accuracy : 0.3% of full scale output 62120-150 Programmable DC Power Source 150V/80A/12KW Front Panel Voltage Control Resolution : 0.002% with keypad 62120-300 Programmable DC Power Source 300V/40A/12KW Time Delay From Output Enable Until Output Stable : 5s maximum 62120-600 Programmable DC Power Source 600V/20A/12KW Isolation : 600Vdc (Output to Chassic) A626001 : GPIB Interface for Model 6260/62120 Series Switching Frequency : typical 31 kHz ; 62 kHz output ripple A626003 : High Voltage 342-500Vac 3 Phase Input Distributed by: Developed and Manufactured by : CHROMA ATE INC. U.S.A. Europe China HEAD OFFICE CHROMA ATE INC.(U. S. A.) CHROMA ATE EUROPE B.V. CHROMA ELECTRONICS (Shen Zhen) Co.,Ltd. No. 43, Wu-Chuan Rd., Wu-Ku lnd. 7 Chrysler Irvine, CA 92618 Max Planckstraat 4, 6716 BE 8F, No.4, Nanyou Tian An Industrial Park, Wu-Ku, Taipei Hsien, Taiwan Tel: +1-949-421-0355 Ede, The Netherlands Estate, Shenzhen,China Tel: +886-2-2298-3855 Fax: +1-949-421-0353 Tel: +31-318-648282 Post Code : 518052 Fax: +886-2-2298-3596 Toll Free: +1-800-478-2026 Fax: +31-318-648288 Tel: +86-755-2664-4598 http: //www.chromaate.com Worldwide Distribution and Service Network Fax: +86-755-2641-9620 E-mail: chroma@chroma.com.tw