QT24I1 - CHEROKEE INTERNATIONAL

Description

Cherokee International QT24I1 150W Series U-Frame Power Supply; 115/230VAC, Single Phase Jumper Selectable, Optional Auto Range 90-264VAC, 47-63Hz Input with +24 V / 7 A Single DC Output

Part Number

QT24I1

Price

Request Quote

Manufacturer

CHEROKEE INTERNATIONAL

Lead Time

Request Quote

Category

PRODUCTS - Q

Specifications

AC Input

115/230VAC, Single phase jumper selectable.

DC Output

V1 ±5%, all other outputs tack V1

Efficiency

75% typical @ full rated load, nominal line.

EMI

FCC and VDE Level “B”.

FUSING (F-1)

4A, 250VAC 5MF type.

Hipot

Input to Output & Input to Chassis rated for 2600VDC for one (1) second.

Hold-up time

16 ms after loss of nominal AC input

Inrush Current

35 Amps maximum

MECHANICAL OUTLINE

L: 6.8” (172.72mm); W: 3.8” (96.52mm); H: 1.5” (38.1mm).

Minimum Current

A 20% minimum load is required on multi-output models. Single output models do not require a minimum load.

Overload Protection

Total primary power limit set at 200 Watts.

Overvoltage

Set at 120% (±5%) V1 only.

POWER FAIL (Good)

Power applied: Output “LOW” until all outputs are in regulation. Power lost: After 1 cycle ridethrough (16 ms min.) output goes “LOW” 2.0 ms min. before loss of regulation.

REGULATION

Combination of line, load, and cross. V1, V3, & V4

Ripple/noise

Less than 1% Pk-Pk (BW 20 MHz)

Shock/Vibration

Per MIL-STD-810C; Vibration: Method 514.2 Proc. X.X1; Shock: Method 512.2, Proc. L, lll; Shock (Transit): Method 516.2 Proc. Ll.

Temperature Coefficient

±2% / °C for all outputs

Temperature Range

Operation 0°C at rated output power of 150 Watts with 25CFM air provided. (100 Watts Convection) Storage: -55 to +85°C.

Transient response

Deviation on all output is ±2% with a 25% load step at 5A/msec slew rate.

Weight

1.3 lbs. (0.61 Kg.)

Features

Auto range 85-264VAC
Brown out protected
CSA Certified to C22.2 No. 234-950
Fully compliant with FCC and VDD (Level B) Standards for EMI
Input surge current limit
Isolated output
Low output noise
Meets IEEE 578 for input transients
Overload Protection
Overvoltage protected
UL Recognized to UL 1950

Datasheet

QT24I1.pdf

297 KiB

Download

Extracted Text

QT24 S Series 150 Watt Switching Power Supply with 1-4 Outputs Product F Features: 150 W Watt M Modular P Power S Supply Low P Profile ffor 1 1U H High A Applications Meets V VDE/FCC C Class “ “B” E EMI Total P Power O Overload L Limit P Protection Over-C Current P Protection Power F Fail S Signal International S Safety C Certifications - U UL, C CSA, T TUV & & C CE M Mark ( (LVD) FEATURES BENEFITS KEY M MARKET S SEGMENTS & & A APPLICATIONS PFC Compliant to EN61000-3-2 Supports global use of power supply Automation Equipment Industrial Applications Low Profile Reduced Height for 1U High Applications Gaming Application Computer Peripherals Economical Lowered system costs Point of Sale Equipment Test Equipment Flexibility with options Custom capability without NRE & long lead-times Networking / Datacom SPECIFICATIONS QT24 S Series o of 1 150 W Watt S Switching P Power S Supply w with 1 1-4 4 O Outputs Input Voltage Range Jumper Selectable Input (85-264VAC; 47-63Hz) Inrush Current (Cold Start) 35A @ 115VAC typical Input Current 2.25A max. at 90 VAC Input Protection Single fuse (4.0A / 250VAC / 5MF Type) EMI FCC and VDE Level “B” (Conducted) Efficiency 75% typical @ 115 VAC (measured at full load) Maximum Output Power 150 Watts Continuous Total Power Over-Load Limit Set at 200W typical of multiple output models Voltage Adjustment Range +/-5% of V1 only, all others track V1 adjustment Regulation Single Output models +/-2%, Multiple output models are +/5% of V1 / V3 / V4, V2 is +/-10% max Transient Repsonse Peak Deviation of +/-2% with 25% step load change at 5A/ms slew rate Output Ripple & Noise 1% pk-pk maximum @ 20MHz Over Voltage Protection Trip point set at 115 - 125% of V1 only. To reset, cycle input power Over Current Limit Single Output Models only, 160-260% of Iout nominal, Hiccup Mode (see Over Power Limit for multiple output models) Hold-Up Time 16ms min at 115 VAC / 60Hz Input and 150 Watt Output Operation Operating Temperature Full load from 0 to 50ºC. Derates linearly from 50ºC to 70ºC at 2.5% per ºC, 25 CFM Required for Full Power, 100W Convection Cooled Power Fail Signal TTL Compatible, Output LOW until outputs are in regulation. Set at 85-90VAC at 150W. Open Collector. Shock & Vivration Per MIL STD-810E per 516.4 Part IV Dimensions 6.80 x 3.80 x 1.50 / 172.7 x 96.5 x 38.1mm Safety Approvals UL 1950, CSA 22.2 No. 950 & 234, TUV (EN60950), CE Mark & CB Report OUTPUT C CONFIGURATIONS V1 O OUTPUT V2 O Output V3 O Output V4 O Output MODEL N NUMBER Vout Amps Vout Amps Vout Amps Vout Amps QT24A1 +5 15 -5 1 -12 1 +12 5 QT24C1 +5 15 -5 1 -15 1 +15 4 QT24D1 +5 15 12 1 +12 6 QT24E1 +5 15 +12 6 QT24F1 530 QT24G1 12 12 QT24H1 15 10 QT24I1 24 7 Specifications listed assume 25°C Ambient Operating Temperature and Full Load Operation unlesss otherwise specfified. This product is qualified for use in OEM equipment and is not appropriate for stand-alone operatiuon. The information contained within this specification is believed to be true and correct at the time of publication, however, Cherokee International accepts no responsiblity for consequences arising from printing errors or inaccuracies. The information and specifications contained herein are subject to change without notice. Cherokee International (North America) Cherokee International (Europe) Cherokee International (China) Power Supply Ltd. 2841 Dow Avenue P: (714) 544-6665 Boulevard de l’Europe, 131 P: +32.10.438.510 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Tustin, CA 92780 USA F: (714) 838-4742 B-1301 Wavre, Belgium F: +32.10.438.213 Shanghai, 201401 China P: 021 6710 8910 sales@cherokeepwr.com sales.europe@cherokeepwr.com sales.china@cherokeepwr.com cherokeepwr.com QT24 S Series 150 Watt Switching Power Supply with 1-4 Outputs OUTLINE D DRAWING PIN A ASSIGNMENTS PART N NUMBER D DEFINITION G GUIDE: PIN FUNCTION PIN FUNCTION PIN FUNCTION CCx xx xx x -1A J1-1 AC LINE J2-5 RTN J2-12 -V3 RoHS: Blank = Non-Compliant J1-3 AC NEUTRAL J2-6 RTN J2-13 +V4 Y = 5 of 6 Compliant J1-5 GROUND J2-7 RTN J2-14 +V4 Z = 6 of 6 Compliant J2-1 +V1 J2-8 RTN J2-15 +V4 Output Combination (See Output Table) J2-2 +V1 J2-9 RTN J3-1 PFAIL RTN Output Power J2-3 +V1 J2-10 RTN J3-2 PFAIL 74 : 75 Watts 75 : 75 Watts J2-4 +V1 J2-11 -V2 Series Name: J1 Connector is AMP Part # 640445-5 or Panduit Part # HLSS-156-5 CCC : Non PFC Input Models Mates with AMP Part # 640426-5 or Panduit Part # CE 156F20-5 CCH : Active PFC Input Models Example: J2 Connector is AMP Part # 1-640445-5 or Molex Part # 09-74-1151 or Panduit HLSS-156-15 Mates with Amp Part # 1-640426-5 or Molex Part # 09-50-3151 or Panduit CE 156F20-15 CCH75F1-1A: 12V Single Output with Active PFC, Non-Compliant RoHS CCC74D3Y-1A: +3.3/+5.1/12V Triple Output (No PFC), 5 of 6 RoHS CCH75K3Z-1A: +5.1/+12/-12V Triple Output with Acvtive PFC, 6 of 6 RoHS J3 Connector is AMP Part #640456-2 or Panduit Part # HLSS-100-2 Mates with AMP Part # 640440-2 or Panduit Part # CE 100F22-2-D Cherokee International (North America) Cherokee International (Europe) Cherokee International (China) Power Supply Ltd. 2841 Dow Avenue P: (714) 544-6665 Boulevard de l’Europe, 131 P: +32.10.438.510 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Tustin, CA 92780 USA F: (714) 838-4742 B-1301 Wavre, Belgium F: +32.10.438.213 Shanghai, 201401 China P: 021 6710 8910 sales@cherokeepwr.com sales.europe@cherokeepwr.com sales.china@cherokeepwr.com cherokeepwr.com

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products