CMP/DMP 400 400 Watt Compact PCI Switching Power Supplies With Universal AC or 48 VDC Input Product Features  PICMG 2.11 R1.0 Compliant Products  Universal AC Input Models (90-264 VAC with Active PFC)  48 VDC Input Models (36 ~ 72 VDC Input Range)  UL, CUL & TUV Safety Certifications  Active Current share for Parallel Operation  Operation up to 70°C  Hot-Swap / N+1 Redundant Operation FEATURES BENEFITS KEY MARKET SEGMENTS & APPLICATIONS No Minimum Load Required Eliminates the need for preload on system backplane  Communications  Industrial Applications Active Current Share Increased M.T.B.F, Offers system scaleability  Servers and Hubs  Test Equipment Compact PCI 3U x 8 HP Compatible with Industry Standard PICMG 2.11 Systems Package  Broadband Switches  Medical Instrumentation Available in AC or DC Input Single source for both versions  Computer Peripherals Models SPECIFICATIONS 400 Watt Compact PCI Switching Power Supplies With Universal AC or 48 VDC Input Output Configuration CMP400 DMP400 Input Range Universal AC Input (90-264) with Active PFC 48 VDC Input (Ranging from 36~72 VDC) Power Factor 0.99 Typical @ 230 VAC Operation - Inrush Current 30A @ 120 VAC / 60A @ 240 VAC Cold Start, max. 40A max @ 48 VDC Efficiency 70% typical at 110VAC, 74% typical at 220VAC (Full Load) 70% typical at 48VDC (Full Load) V1 Output +5V @ 50A +5V @ 50A V2 Output +3.3V @ 50A +3.3V @ 50A V3 Output +12V @ 12A +12V @ 12A V4 Output -12V @ 4A -12V @ 4A Input Transient Protection IEC 1000-4-5 level 3, IEC10004-44 level 2, IEEE-578 EMI CISPR 22 class A / FCC part 15 class A Line Regulation ±2% All Outputs (maximum) Load Regulation ±2% All Outputs (maximum) Output Ripple & Noise 50mV or 1% pk-pk maximum, whichever is greater Overload Protection Outputs are protected against overload and short circuit. Reset by cycling input power Over Voltage Protection All outputs are set at 115-130% of nominal. Reset by cycling input power Operating Temperature 0°C to 50°C at rated output power, derate 2.5% per °C up to 70°C Cooling Requires 400 linear feet/minute for full power operation Output Power Derating Signal TTL Low signal when power supply temperature is out of specified limit Remote Sense On V1 & V2, Compensates for voltage drop of up to 0.5V Remote Enable TTL High or Open = Power supply OFF, DRIVE Low to Enable Remote Inhibit TTL High or Open = Power supply ON, DRIVE Low to Disable Current Share V1 / V2 / V3 Outputs only, +/-10% accuracy Power Fail Signal Signal goes low after input / output failure LED Indicators Green LED indicates Power Good. Amber LED indicates Power Fail Shock & Vibration MIL STD-810D Weight 4.0 pounds Dimensions 6U x 6.762” x 8HP (10.311H x 6.762L x 1.584W”) Safety Approvals UL/cUL60950, CE Mark (LVD) TUV Specifications listed assume 25°C Ambient Operating Temperature and Full Load Operation unlesss otherwise specfified. This product is qualified for use in OEM equipment and is not appropriate for stand-alone operatiuon. The infor- mation contained within this specification is believed to be true and correct at the time of publication, however, Cherokee International accepts no responsiblity for consequences arising from printing errors or inaccuracies. The informa- tion and specifications contained herein are subject to change without notice. Document Title: CMP/DMP 400 Datasheet Revision: 04/07/A www.cherokeepwr.com CMP/DMP 400 400 Watt Compact PCI Switching Power Supplies With Universal AC or 48 VDC Input OUTLINE DRAWING All Dimensions in Inches (mm) Tolerance: .XX = ± .02 in (.50 mm) .XXX = ± .010 in (.254 mm) PART NUMBER DEFINITION PIN OUT INFORMATION PIN PIN LENGTH FUNCTION DESCRIPTION PIN PIN LENGTH FUNCTION DESCRIPTION 1-4 MEDIUM V1 V1 Output 32 MEDIUM V2 ADJ V2 Margining x MP 400 xx -1A 5-12 MEDIUM RTN V1 & V2 Return 33 MEDIUM V2 SENSE Remote Sense (V2) C=AC Input Rev. 13-18 MEDIUM V2 V2 Output 34 MEDIUM S RTN Sense Return D=DC Input Blank=Non-compliant Input YO=5 of 6 Compliant 19 MEDIUM RTN V3 Return 35 MEDIUM V1 SHARE Current Share (V1) Series ZO=6 of 6 Compliant 20 MEDIUM V3 V3 Output 36 MEDIUM V3 SENSE Remote Sense (V3) 400=400W RoHS Output Current 21 MEDIUM V4 V4 Output 37 MEDIUM RESERVED Not Used 22 MEDIUM RTN Signal Return 38 MEDIUM DEG Temp. Derate Signal 23 MEDIUM RESERVED Not Used 39 MEDIUM INH Inhibit Examples: 24 MEDIUM RTN V4 Return 40 MEDIUM RESERVED Not Used CMP400YO-1A AC Input, 400 Watts, 5 of 6 RoHS 25 MEDIUM RESERVED Not Used 41 MEDIUM V2 SHARE Current Share (V2) DMP400ZO-1A 26 MEDIUM RESERVED Not Used 42 MEDIUM FAIL Power Fail DC Input, 400 Watts, 6 of 6 RoHS DMP400-1A 27 SHORT EN Enable 43 MEDIUM RESERVED Not Used DC Input, 400 Watts 28 MEDIUM RESERVED Not Used 44 MEDIUM V3 SHARE Current Share (V3) 29 MEDIUM V1 ADJ V1 Margining 45 LONG CGND Chassis Ground 30 MEDIUM V1 SENSE Remote Sense (V1) 46 MEDIUM ACN/+DC AC Neutral or +DC Input 31 MEDIUM RESERVED Not Used 47 MEDIUM ACL/-DC AC Line or -DC Input Cherokee International reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Cherokee Headquarters Cherokee Europe Cherokee International China Powertel India Pvt. Cherokee India Pvt. Ltd 2841 Dow Avenue P: 714.544.6665 Boulevard de l’Europe, 131 P: +32.10.438.211 1353 Chenqiao Road, Shanghai Fengpu Industrial Park Unit #166, S.D.F.VI (Phase1) Unit No. 95 SDF 111 Building Tustin, CA 92780, USA F: 714.838.4742 B-1301 Wavre, Belgium F: +32.10.438.212 Shanghai 201401, China P: 8621.6710.8910 Seepz, Andheri (East) Seepz, Andheri (East) sales@cherokeepwr.com sales@cherokeepwr.be sales.china@cherokeepwr.com F: 8621.6710.8908 Mumbai, India 400096 Mumbai, India 400096 Document Title: CMP/DMP 400 Datasheet Revision: 04/07/A www.cherokeepwr.com