CHEMELEX AMC-1B
Specifications
Accuracy
±6°F (±3.3°C)
Connection
Screw terminals accept #10–#14 | AWG wire through 3/4" NPT conduit hub.
Deadband
3°F to 9°F (1.7°C to 5°C) above actuation temperature
Electrical rating
22 A at 125/250/480 Vac
Enclosure
NEMA 4X | Polyurethane-coated cast aluminum housing | Stainless steel hardware
Housing exposure limits
–40°F to 160°F (–40°C to 71°C)
Range
25°F to 325°F (–4°C to 163°C)
Sensor exposure limits
–40°F to 420°F (–40°C to 215°C)
Sensor material
300 series stainless steel
Sensor type
Fluid-filled (silicone) bulb and 9-foot capillary
Set point repeatability
±3°F (±1.7°C)
Switch
SPDT
Features
- Accuracy+6 degrees Farenhiet (+3.3 degrees Celsius)
- Connection terminals:screw terminal, 10-14 AWG (2-5 mm)
- Deadband=2 degrees Farenhiet to 12 degrees Farenheit (1.1 degrees Celsius to 6.7 degrees Celsius) above actuation temperature
- Electrical rating=22 A at 125/250/480 Vac
- Enclosure=NEMA 4X, polyurethane-coated cast-0aluminum housing, stainless steel hardware
- Entries=one 3/4-in NPT conduit hub
- Sensor exposure limits=-40 degrees Farenhiet to 420 degrees Farenheiet(-40 degrees Celsius to 215 degrees Celsius)
- Sensor material=300 series stainless steel
- Sensor type=fluid_filled (silicone) bulb and 9ft (2.7 m) capillary
- Set point repeatability= =3 degrees Farenhiet (=1.7 degrees Celsius)
- Setpoint range= 25 degrees Faranhiet to 325 degrees Farenhiet (-4 degrees Celsius to 163 degrees Celsius)
- Switch=SPDT
Datasheet
Extracted Text
8. Technical Data Sheets AMC-1B Line-sensing thermostat for nonhazardous locations The DigiTrace AMC-1B line-sensing temperatures and can be used to control a indicate low-temperature or high-tempera- thermostat is designed to control heat- single heat-tracing circuit or as a pilot ture alarm conditions. tracing systems in nonhazardous locations. control of a contactor switching multiple The AMC-1B senses pipe or tank wall heat-tracing circuits. It can also be used to 4.5 in (114 mm) 3.0 in (76 mm) 4.0 in (102 mm) 0.3 in (9 mm) Terminal 4.0 in block (102 mm) 4.5 in 8.0 in (114 mm) (202 mm) 5.6 in 1.2 in (142 mm) (30 mm) 3/4 in NPT (19 mm) Adjusting 0.28 in (7 mm) 0.8 in conduit knob mounting holes (2X) (20 mm) Removable entry knob cover Specifications Enclosure NEMA 4X, polyurethane-coated cast-aluminum housing, stainless steel hardware Entries One 3/4-in NPT conduit hub Set point range 25°F to 325°F (–4°C to 163°C) Sensor exposure limits –40°F to 420°F (–40°C to 215°C) Housing exposure limits –40°F to 160°F (–40°C to 71°C) Switch SPDT Electrical rating 22 A at 125 / 250 / 480 Vac Accuracy ±6°F (±3.3°C) Deadband 2°F to 12°F (1.1°C to 6.7°C) above actuation temperature Set point repeatability ±3°F (±1.7°C) Sensor type Fluid-filled (silicone) bulb and 9 ft (2.7 m) capillary Sensor material 300 series stainless steel Connection terminals Screw terminals, 10–14 AWG (2–5 mm2) Approvals H55200 2/12 www.tycothermal.com 1 of 1 R Europe, Middle East, Africa Worldwide Headquarters Canada Tyco Thermal Controls Tyco Thermal Controls Tyco Thermal Controls Romeinse straat 14 7433 Harwin Drive 250 West St. Houston, TX 77036 Trenton, Ontario K8V 5S2 3001 Leuven België / Belgique USA Canada Tel: 800-545-6258 Tel: 800-545-6258 Tel: +32 16 213 511 Fax: +32 16 213 603 Tel: 650-216-1526 Fax: 800-527-5703 Fax: 800-527-5703 Tel: 613-392-6571 Fax: 650-474-7711 Fax: 613-392-3999 info@tycothermal.com www.tycothermal.com Latin America Asia Pacific Tyco Thermal Controls Tyco Thermal Controls Al. Araguaia, 2044 – Sala.1101, 20F, Innovation Building, Bloco B 1009 Yi Shan Rd, Edificio CEA – Alphaville Shanghai 200233, P.R.China Barueri – Sao Paulo – Brasil Tel: +86 21 2412 1688 06455-000 Fax: +86 21 5426 2937 / 5426 3167 Tel: +55 11 2588 1400 Fax: +55 11 2588 1410 Tyco, Alliance Integrated Systems, AMC, AutoMatrix, AutoSol, BTV, CapaciSense, Chemelex, DHSX, DigiTrace, DigiTrace logo, DigiTrace Supervisor, Duoterm, ElectroMelt, EM2XR, FHSM, FHSC, FlexFit, FlexiClic, Flowguard, FreezeTrace, FreezGard, Frostex, Frostex Plus, Frostguard, FroStop, FSE, Gardian, HAK, Handvise, HBTV, HCCL, HotCap, HQTV, HTPG, HTPI, HWAT, HXTV, IceStop, Interlock, JBM, JBS, K-Flex, K-Flex logo, KHE, KHH, KHL, KHP, KTV, Labsafe, LBTV, LHC, LHFV, LHRV, Metabond, Mini WinterGard, Miser WinterGard, MoniTrace, Multi-plus, NGC, PetroTrace, PLI, PolyMatrix, Pyro CiC, PyroFLX, Pyromaster, Pyropak, Pyrosil, PyroSizer, Pyrotenax, Pyrotenax Designer, Pyrotenax logo, QTVR, QuickNet, QuickNet logo, QuickStat, QuickTerm, RayClic, RaySol, RayStat, Retro WinterGard, RHS, RHSC, RHSM, RMM2, SBF, SBV, SC, SHC, Sheathmaster, ShowerGuard, SLBTV, Smart Heat for Comfort and Safety, SnoCalc, SnoCalc logo, STS, System 500, System 1850, System 1850-SE, System 2000, System 2200, T2, T2 logo, T2Blue, T2QuickNet, T2Red, T2Reflecta, TankCalc Plus, TempBus, Thermoheat, ThermoLimit, Thermo- Line, Total Care in Heat-tracing, Touch, Trac-Loc, Trac Calc, TraceCalc Net, TraceCalc Net logo, TraceCalc Pro logo, TraceGuard 277, TraceMaster, Tracer, Tracer logo, TRACERLYNX, TRACERLYNX logo, TraceStat, TraceTek, TraceTek logo, TruckPak, VLBTV, VLKTV, VPL, We manage the heat you need, WinterGard, WinterGard logo, WinterGard Plus, WinterGard Wet, XL-ERATE, XL-ERATE logo, XL-Trace, XTV and Zero EMI are registered and/or unregistered trademarks of Tyco Thermal Controls LLC or its affiliates. All other trademarks are the property of their respective owners. Important: All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their particular application. Tyco Thermal Controls makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Thermal Controls' only obligations are those in the Tyco Thermal Controls Standard Terms and Conditions of Sale for this product, and in no case will Tyco Thermal Controls or its distributors be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In addition, Tyco Thermal Controls reserves the right to make changes—without notification to Buyer—to processing or materials that do not affect compliance with any applicable specification. © 2012 Tyco Thermal Controls LLC
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the AMC-1B have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods