P R O D U C T D ATA S H E E T STANDARD RACK K E Y F E AT U R E S • Supports 19” EIA rack-mount equipment designed for two-post panel mounting like patch panels and network switches. • Easy positioning of equipment with marked and numbered rack-mount spaces. • Quick attachment of equipment with threaded equipment mounting holes and included equipment- mounting screws. • Delivers unassembled in a single carton — quick and easy bolt-together assembly takes less than 10 minutes. Easy Equipment Installation Marked and numbered • Lightweight aluminum construction for easy rack-mount spaces (U). transport and positioning during installation. • Quickly attach any CPI vertical cable manager to the side of the rack through pre-punched web channel holes. • Floor-mount holes on the base angles make it easy to secure the rack to the floor with a concrete, wood or raised floor installation kit. A P P L I C AT I O N S • Use Standard Rack with vertical and horizontal cable managers to support interconnect and network equipment in telecommunications rooms, equipment rooms and data centers. The Standard Rack is a high quality, cost-effective storage solution for patch panels and network switches that uses less floor space than a cabinet or a four-post rack. The small 20.3”W x 15”D (516.1 mm x 381 • Use with shelves to support other equipment. mm) footprint makes Standard Rack the best choice in many telecommunications and equipment rooms, especially where floor space is limited. U S E W I T H The Standard Rack meets project specifications, will hold 1,000 lb (453.1 kg) of equipment and is UL ® • Velocity Cable Management Listed as a communications circuit accessory. Support 19” EIA wide rack-mount equipment or shelves with • Rack and Frame Installation Kit the Standard Rack which is available in three heights. Equipment attaches to the front or rear of the 3” • Raised Floor Rack Support For 3” (80 mm) Channel deep (80 mm) vertical mounting channels with screws. Mounting positions are marked and numbered making it easy to position and install equipment or shelves. Racks deliver unassembled in a compact carton, and are easy to assemble. Components bolt together with R E L AT E D A C C E S S O R I E S included hardware; assembly takes approximately 10 minutes. Two-post racks must be secured to building • 3” (80 mm) Channel Rack-To-Runway Mounting structure. The Standard Rack has pre-punched base angles making it easy to attach the rack to the floor Plate • Vertical PDUs for Racks using a CPI installation kit for wood, slab or raised floors. • Rack Shelves Because most Standard Rack applications require cable management, CPI’s vertical cable managers attach directly to the side of the Standard Rack. Vertical cable managers organize cables by rack-mount space simplifying future moves, adds and changes to the network. The best solution includes horizontal managers in between patch panels and network switches to fan patch cords into individual port connections. See reverse for product selection. Contact CPI Technical Support for configuration assistance. +1-800-834-4969 techsupport@chatsworth.com www.chatsworth.com P R O D U C T D ATA S H E E T S TA N D A R D R A C K S P E C I F I C AT I O N S D I M E N S I O N S • Open floor-mount two-post rack supports 19” EIA wide rack-mount equipment • For indoor use only, in environmentally controlled areas; may not be used outdoors, in industrial or harsh environments, or in plenum spaces • Available sizes: Heights: 84” (2.1 m), 96”(2.4 m), 108”, (2.7 m) Width: 20.3” (516.1 mm) Depth: 15” (381 mm) • Equipment space: Heights: 45U, 51U, 58U Width: 19” EIA (17-3/4” clearance) Depth: 20”D (508 mm) Note: Double-sided shelves for 26”D (660.4 mm) ™ equipment are available. Use QuadraRack 4-Post Frame when rack-mount equipment exceeds 20”D. (508 mm) • Equipment Support: - 1 pair C-shaped equipment mounting channels fixed in place - 19”W, EIA-310-D compliant - Universal hole pattern, 5/8”-5/8”-1/2” (15.9 mm x 15.9 mm x 12.7 mm) vertical hole spacing - Threaded #12-24 equipment mounting holes Includes 50 each #12-24 equipment mounting screws • Cable Management Use vertical and horizontal cable managers, sold as accessories • Load capacity: 1,000 lb (453.6 kg) of equipment 7’ ( 2.1 m) Rack Shown • Certifications: - EIA-310-D compliant O R D E R I N G I N F O R M AT I O N - UL and cUL Listed as a communications circuit accessory Part Number Description Shipping Weight 55053-X03 7’H (2.1 m) x 19”W, 45U 31 lb (14.1 kg) • Material: Aluminum extrusion 55053-X15 8’H (2.4 m) x 19”W, 51U 37 lb (16.8 kg) • Construction: 55053-X08 9’H (2.7 m) x 19”W, 58U 40 lb (18.1 kg) - Bolted assembly X=color: 1=Gray, 2=Computer White, 5=Clear, 7=Black - Ships unassembled • Finish: - Clear grained aluminum or Epoxy-polyester hybrid powder coat paint - Available in black, gray or computer white ©2011 Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, MegaFrame, Saf-T-Grip, Seismic Frame, SlimFrame, TeraFrame, GlobalFrame, Cube-iT Plus, Evolution, OnTrac, QuadraRack and Velocity are federally registered trademarks of Chatsworth Products, Inc. Simply Efficient is a trademark of Chatsworth Products, Inc. All other trademarks belong to their respective companies.. Rev.5 11/5 MKT-60020-317