Network Physical Infrastructure Products 4 Section 4 Network Physical Infrastructure Products Product or Vendor Name Racks, Cabinets and Cable Management Surface Raceway Product or Vendor Name......................................................................................................................................000–000 Choosing Racks and Cabinets . . . . . . . . . . . . . 4.2 PANDUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.129–4.144 Chatsworth Products, Inc. (CPI). . . . . . . . . . . . 4.3–4.22 Wiremold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.145–4.150 Product or Vendor Name......................................................................................................................................000–000 APC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.23–4.26 Cable Routing and Wiring Duct Product or Vendor Name......................................................................................................................................000–000 Belden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.27–4.29 TE Connectivity . . . . . . . . . . . . . . . . . . . . . . . . 4.151 Product or V Comm endor Name Scope Solu...................................................................................................................................... tions . . . . . . . . . . . . . . . . . . . 4.30–4.36 000–000 PANDUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.152–4.156 Cooper B-Line . . . . . . . . . . . . . . . . . . . . . . . . . 4.37–4.42 Product or Vendor Name......................................................................................................................................000–000 J-hooks and Fasteners Great Lakes Case & Cabinets Co., Inc. . . . . . . . 4.43–4.50 Cooper B-Line . . . . . . . . . . . . . . . . . . . . . . . . . 4.157 Product or Vendor Name......................................................................................................................................000–000 Hoffman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.51–4.54 ERICO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.158–4.164 Knurr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.55 Product or Vendor Name......................................................................................................................................000–000 PANDUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.165–4.166 Ortronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.56–4.71 Product or Vendor Name......................................................................................................................................000–000 PANDUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.72–4.80 Indoor-rated Innerduct Rittal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.81–4.86 Innerduct . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.167–4.168 Product or Vendor Name......................................................................................................................................000–000 Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.169–4.170 Cabinet Locking Systems Product or Vendor Name......................................................................................................................................000–000 D Textile Innerduct . . . . . . . . . . . . . . . . . . . . . . . 4.171–4.173 TZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.87–4.92 Product or Vendor Name......................................................................................................................................000–000 Grounding and Bonding Zone Cabling Enclosures Why Ground? . . . . . . . . . . . . . . . . . . . . . . . . . . 4.174 Product or Vendor Name......................................................................................................................................000–000 Chatsworth Products, Inc. (CPI). . . . . . . . . . . . 4.93 Chatsworth Products, Inc. (CPI) . . . . . . . . . . . . 4.175 PANDUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.94–4.96 Product or Vendor Name......................................................................................................................................000–000 ERICO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.176–4.177 Wiremold . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.97 Ortronics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.178–4.179 Product or Vendor Name......................................................................................................................................000–000 Security and Commercial Enclosures PANDUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.180–4.184 Product or Vendor Name......................................................................................................................................000–000 Chatsworth Products, Inc. (CPI). . . . . . . . . . . . 4.98 LAN Furniture Great Lakes Case & Cabinets Co., Inc. . . . . . . . 4.99 Product or Vendor Name......................................................................................................................................000–000 Great Lakes Case & Cabinets Co., Inc. . . . . . . . 4.185 Hoffman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.100–4.102 Product or Vendor Name......................................................................................................................................000–000 Floor Boxes Ladder Rack Cable Runway Wiremold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.186–4.187 Product or Vendor Name......................................................................................................................................000–000 Chatsworth Products, Inc. (CPI). . . . . . . . . . . . 4.103–4.107 Cablofil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.108 Cross-connect Backboards and Mounting Brackets Product or Vendor Name......................................................................................................................................000–000 CommScope Solutions . . . . . . . . . . . . . . . . . . . 4.109 Backboards. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.188 Product or Vendor Name......................................................................................................................................000–000 Cooper B-Line . . . . . . . . . . . . . . . . . . . . . . . . . 4.110–4.111 TE Connectivity . . . . . . . . . . . . . . . . . . . . . . . . 4.189–4.190 Product or Vendor Name......................................................................................................................................000–000 Wire Basket Cable Runway Cablofil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.112–4.117 Product or Vendor Name......................................................................................................................................000–000 Chatsworth Products, Inc. (CPI). . . . . . . . . . . . 4.118–4.123 Product or Vendor Name......................................................................................................................................000–000 Cooper B-Line . . . . . . . . . . . . . . . . . . . . . . . . . 4.124–4.128 Network Physical Infrastructure Products The Continues with ... AIRFLOW MANAGEMENT There’s nothing passive about energy savings. ® The new Mighty Mo Air Control containment ™ solutions elevate the Layer Zero solution, bringing targeted airflow management to the data center. Together, Mighty Mo racks, cabinets and containment products provide completely passive thermal management solutions to improve cooling, optimize network performance and significantly increase energy savings. Visit www.legrand.us/ortronics/layer-zero-white-paper to download our white paper, Layer Zero for the Data Center. Racks, Cabinets and Cable Management Choosing Racks and Cabinets ./Tech Tips;Choosing Rack and Cabinet Systems/14532 Index1.Support and Supplies//Physical Support Structure//Cabinets Tech Tips Choosing Rack and Cabinet Systems W Wh ha at t a ar re e t th he e m ma aiin n di dif ff fer ere en nc ce es s b bet etw we een en " "r ra ac ck ks s" " a an nd d " "c ca ab biin net ets s" "? ? W Wh ha at t a ar re e t th he e m ma aiin n di dif ff fer ere en nc ce es s b bet etw we een en " "r ra ac ck ks s" " a an nd d " "c ca ab biin net ets s" "? ? The term "rack" is often used in the industry to describe both open-frame or relay racks as well as cabinet or rack enclosures. While these products provide the same basic function, there are a number of factors to consider when deciding which is appropriate for your specific application. E Eq qu uiip pm men ent t:: A cabinet is more appropriate for heavy servers, while a rack provides easy access to all sides of the mounted equipment. E Eq qu uiip pm men ent t:: A Aiir rf fllo ow w a an nd d c co oo olliin ng g:: A rack is completely open while a cabinet needs to be able to provide sufficient airflow when ventilation is needed. Cabinets allow A Aiir rf fllo ow w a an nd d c co oo olliin ng g:: for appropriate cooling management and heat removal, whereas open racks may dissipate heat uncontrollably. E En nv viir ro on nm me en nt t:: If your equipment requires a dust-free environment, the extra protection that a cabinet provides is very suitable. If you have a very clean E En nv viir ro on nm me en nt t:: and well-kept telecom center then the open convenience of a rack will fit your needs. A Aes est th het etiic cs s:: If your telecom closet will be visible to the public, cabinets look neater than an open rack; however, there are various cable management A Aes est th het etiic cs s:: products that will give a rack a very neat and professional appearance. Sec Secu ur riit ty y:: Cabinets have locking mechanisms available on their doors for added security. An open rack does not have that feature. Sec Secu ur riit ty y:: Qu Que es st tiio on ns s t to o c co on ns siide der r w wh hen en u us siin ng g c ca abi bin net ets s.. Qu Que es st tiio on ns s t to o c co on ns siide der r w wh hen en u us siin ng g c ca abi bin net ets s.. Whenever you need to mount network equipment (hubs, switches, bridges, routers, terminal servers, print servers, repeaters, monitors and keyboards), and environmental protection, aesthetics and security are concerns, here are some of the basic questions you may want to be asking: D Do o II a allr re ea ady dy h ha av ve e ex exiis st tiin ng g c ca ab biin net ets s iin n y yo ou ur r d da at ta a c ce en nt te er r o or r n ne et tw wo or rk k en env viir ro on nm me en nt t? ? D Do o II a allr re ea ady dy h ha av ve e ex exiis st tiin ng g c ca ab biin net ets s iin n y yo ou ur r d da at ta a c ce en nt te er r o or r n ne et tw wo or rk k en env viir ro on nm me en nt t? ? If so, for aesthetic and logistical reasons you might want to select a cabinet from the same manufacturer. W Wh ha at t t ty yp pe e o of f en env viir ro on nm me en nt t iis s t th he e c ca ab biin net et g go oiin ng g iin nt to o? ? W Wh ha at t t ty yp pe e o of f en env viir ro on nm me en nt t iis s t th he e c ca ab biin net et g go oiin ng g iin nt to o? ? St Sta an nda dar rd d e eq qu uiip pm me en nt t r ro oo om m - Free-standing, network and server cabinets are common. St Sta an nda dar rd d e eq qu uiip pm me en nt t r ro oo om m D Da at ta a c cen ent ter er - Colocation cabinets allow compartmental access. D Da at ta a c cen ent ter er D Li Lim miit ted ed f fllo oo or r s sp pa ac ce e - Wall-mount cabinets often make sense. Li Lim miit ted ed f fllo oo or r s sp pa ac ce e E Ea ar rt th hq qu ua ak ke e z zo on ne e - Seismic cabinets are typically used where additional support and bracing are necessary. Standards ratings, like Bellcore Zone 4 and E Ea ar rt th hq qu ua ak ke e z zo on ne e NEMA are important. Z Zo on ne e a ac cc ce es ss s - The ZCAC places the consolidation point for wiring patch panels, punch-down blocks, hubs or routers closer to the work area. This allows Z Zo on ne e a ac cc ce es ss s for easy access for moves, adds and changes. F Fa ac ct to or ry y f fllo oo or r - Some cabinets are designed and tested to withstand different industrial environments. F Fa ac ct to or ry y f fllo oo or r W Wh ha at t iis s g go oiin ng g iin nt to o t th he e c ca ab biin net et? ? W Wh ha at t iis s g go oiin ng g iin nt to o t th he e c ca ab biin net et? ? The dimensions of the network equipment, cable management, climate control and power protection will dictate the cabinet, door and shelf sizes, as well as the number of shelves. Ho How w iis s t th he e n net etw wo or rk k eq equ uiip pm men ent t v ve en nt tiilla at ted? ed? Ho How w iis s t th he e n net etw wo or rk k eq equ uiip pm men ent t v ve en nt tiilla at ted? ed? All network equipment generates heat, and too much heat can impact network performance. There are many climate control cabinet options, from perforated doors to ceiling fans that ensure proper temperatures are maintained. Self-contained cooling cabinets are also highly recommended for high-density environments that exceed 15 kW. Request the latest literature and guides from Anixter. 4.2 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) ./Cabinets;Free-standing, Network and Server/13408 Index1.Support and Supplies//Physical Support Structure//Cabinets Anixter No. Vendor No. Description F-Series TeraFrame Cabinet System 400141 FF1L-113C-C42 F-Series TeraFrame Cabinet, 45U x 23.6 in. W x 45.1 in. D, perforated front door, CHATSWORTH PRODUCTS INC (CPI) PR12030V2-21859.eps double perforated rear door, top panel with two cable openings, and two solid side panels, black 400142 FF2L-113C-C42 F-Series TeraFrame Cabinet, 45U x 27.6 in. W x 45.1 in. D, perforated front door, double perforated rear door, top panel with two cable openings, and two solid side panels, black F-SERIES TERAFRAME SOLUTIONS FOR NETWORK APPLICATIONS Anixter No. Vendor No. Description The F-Series TeraFrame is a highly configurable equipment storage cabinet that 400143 FF2L-113C-C22 F-Series TeraFrame Cabinet, 45U x 27.6 in. organizes, stores and secures computer, data storage and network equipment in the W x 45.1 in. D, perforated front door, data center, computer room or network environment. Whether you need a server double perforated rear door, top panel cabinet for high-density applications, a networking cabinet to manage fiber and/or with four cable openings and two solid Cat 6A UTP cables, or a combination of both, the F-Series TeraFrame gives you the sides, black ability to configure cabinets suited for your present and future needs. 400144 FF3L-113C-C22 F-Series TeraFrame Cabinet, 45U x 31.5 in. FEATURES W x 45.1 in. D, perforated front door, • Available in three widths: 23.6 in., 27.6 in. and 31.5 in. (600 mm, 700 mm, double perforated rear door, top panel 800 mm) with four cable openings and two solid • Available in 12 heights; 24U, 36U and 42U to 51U in 1U increments sides, black • Available in 17 depths ranging from 35.3 in. to 51 in. F-SERIES TERAFRAME THERMAL MANAGEMENT OPTIONS AND ACCESSORIES • Welded steel and bolted aluminum frame Anixter No. Vendor No. Description • Includes two pair of 19 in. wide EIA-310-E mounting rails with Universal 324470 34538-000 2U snap-in filler panel, 19 in. W, plastic, hole spacing black, one each • Load ratings: 23.6 in. W 2,500 lb.; 27.6 in. W 2,000 lb.; 31.5 in. W 2,000 lb. • Top panels have large brushed-covered cable openings 324473 13571-002 Integral Raised Floor Grommet, 8 in. x • Front door features hidden tamper-resistant hinges and swing-handle latches 4 in. cable opening, 10 pack • The part numbers listed below are just some of the available configurations 324474 13576-002 Surface Mount Floor Grommet, 8 in. x 4 in. • Contact sales for the F-Series TeraFrame configuration that best fits cable opening, 10 pack your applications F-SERIES TERAFRAME CABLE MANAGEMENT OPTIONS AND ACCESSORIES F-SERIES TERAFRAME SOLUTIONS FOR SERVER APPLICATIONS Anixter No. Vendor No. Description Anixter No. Vendor No. Description 324472 13517-701 Rack-mount cable shelf with brush 400138 FF1U-111B-C52 F-Series TeraFrame Cabinet, 45U x 23.6 in. opening along front, 1U, black W x 51.0 in. D, perforated front door, solid rear door, includes top panel with two cable openings and a 20 in. H to 34 in. H Vertical Exhaust Duct and two solid sides, black 400140 FF2U-111B-C62 F-Series TeraFrame Cabinet, 45U x 27.6 in. W x 51.0 in. D, perforated front door, solid rear door, top panel with two cable openings and a 34 in. H to 60 in. H Vertical Exhaust Duct and two solid sides, black Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.3 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Cabinets;Free-standing, Network/17875 Index1.Support and Supplies//Physical Support Structure//Accessories ACCESSORIES GF-Series GlobalFrame Cabinet System Anixter No. Vendor No. Description 431944 25190-001 Cable Port Brush Kit, 3.9 in. W x 8.8 in. D, CHATSWORTH PRODUCTS INC (CPI) PR34422V2-254402.eps pack of two, black 431948 25104-001 Cable Ring Kit, for 23.6 in. W cabinets, 1.7 in. W x 5.0 in. D, pack of eight, black 444290 25105-001 Cable Ring Kit, for 29.5 in. W cabinets, 4.5 in. W x 9.8 in. D, pack of eight, black 431956 25221-701 Cable Lashing Bracket, for 42U cabinets, 5 in. W, black 444288 25221-705 Cable Lashing Bracket, for 48U cabinets, 5 in. W, black 435290 25141-700 Full Height PDU Bracket, for 42U cabinets, The GF-Series GlobalFrame Cabinet System is an easy-to-use, cost-effective, computer 5.2 in. W, black and network equipment storage cabinet for data center, computer and equipment 441740 25141-702 Full Height PDU Bracket, for 48U cabinets, room use. Select models are also available for quick shipment. 5.2 in. W, black FEATURES Cabinets;Free-standing, Network/14620 Index1.Support and Supplies//Physical Support Structure//Cabinets • Available in three widths: 23.6 in., 29.5 in. or 31.5 in. N-Series TeraFrame Network Cabinet • Available in three heights: 42U, 45U, 48U CHATSWORTH PRODUCTS INC (CPI) PR20308V2-71442.eps • Available in four depths: 32.7 in., 40.3 in., 42.3 in. or 48.4 in. • Welded and bolted steel frame • Includes two pair of 19 in. wide EIA-310-E mounting rails with Universal hole spacing • Load ratings: 3,000 lb. on leveling feet, 2,250 lb. on casters • Top panels have four large cable knockouts; Cable Port Brush Kits are ordered separately D • Doors are perforated with locking swing-handle latches • Locking two-piece side panels for easier handling • Includes casters, leveling feet, baying kit and PDU mounting bracket • The part numbers listed below are just some of the available configurations; The N-Series TeraFrame Network Cabinet is designed specifically to store network also available with Vertical Exhaust Duct equipment and cabling in a hot aisle/cold aisle data center, computer room or • Contact sales for the GF-Series GlobalFrame configuration that best fits network environment. The N-Series TeraFrame has offset doors and side panels that your applications provide additional interior space around the front, rear and sides of equipment for 42U cable management and enhanced airflow. Order with a Network Switch Exhaust Duct Perforated front door, double perforated rear door, includes top panel with four cable to guide hot exhaust air from the side of network switch equipment to the rear door. knockouts and two solid sides, black FEATURES Anixter No. Vendor No. Description • 31.5 in. W (800 mm) or 40 in. W (1,016 mm) exterior with 24 in. W (600 mm) 434277 GF-1A320 79.3 in. H x 23.6 in. W x 42.3 in. D internal recessed frame 431938 GF-1A420 79.3 in. H x 23.6 in. W x 48.4 in. D • Available in various heights: 42 to 51U in 1U increments 437300 GF-1B320 79.3 in. H x 29.5 in. W x 42.3 in. D • Available in various depths ranging from 41.2 in. to 51.1 in. 438710 GF-1B420 79.3 in. H x 29.5 in. W x 48.4 in. D • Welded steel frame • Includes two pair of 19 in. wide EIA-310-E mounting rails with Universal 48U hole spacing Perforated front door, double perforated rear door, includes top panel with four cable • Load rating: 2,500 lb. knockouts and two solid sides, black • Top panels have large cable openings Anixter No. Vendor No. Description • Doors have perforated panels and swing-handles with two-point latches 444299 GF-3A320 89.8 in. H x 23.6 in. W x 42.3 in. D • Part numbers listed below are just some of the available configurations 444305 GF-3A420 89.8 in. H x 23.6 in. W x 48.4 in. D 444308 GF-3B320 89.8 in. H x 29.5 in. W x 42.3 in. D 444310 GF-3B420 89.8 in. H x 29.5 in. W x 48.4 in. D Request the latest literature and guides from Anixter. 4.4 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) N-SERIES TERAFRAME NETWORK CABINETS N-SERIES TERAFRAME NETWORK CABINETS, RECOMMENDED SOLUTIONS Anixter No. Vendor No. Description Anixter No. Vendor No. Description 353006 NF0J-213C-C42 N-Series TeraFrame Network Cabinet, 45U 419225 NF0U-113C-C42 Recommended solution for the Cisco x 31.5 in. W x 43.2 in. D, perforated front Nexus 7010 switch: N-Series TeraFrame door, perforated rear double door, Network Cabinet, 45U x 31.5 in. W x includes top panel and two solid side 51.1 in. D, perforated front door, panels, black perforated rear double door, includes top panel and two solid side panels, black 353007 NF0P-213C-C42 N-Series TeraFrame Network Cabinet, 45U x 31.5 in. W x 48.1 in. D, perforated front 378312 NF2K-113C-C42 Recommended solution for the Cisco door, perforated rear double door, Catalyst 6506, 6509 and 6513 switches includes top panel and two solid side and MDS 9509 director: N-Series panels, black TeraFrame Network Cabinet, 45U x 31.5 in. W x 44.2 in. D, perforated front 353008 NF0J-213C-C40 N-Series TeraFrame Network Cabinet, 45U door, perforated rear double door, x 31.5 in. W x 43.2 in. D, perforated front includes Network Switch Exhaust Duct, door, perforated rear double door, two power supply exhaust ducts, top includes top panel, no side panels, black panel and two solid side panels, black 353009 NF0P-213C-C40 N-Series TeraFrame Network Cabinet, 45U 383905 NF3K-113C-C42 Recommended solution for the Cisco MDS x 31.5 in. W x 48.1 in. D, perforated front 9513 director: N-Series TeraFrame door, perforated rear double door, Network Cabinet, 45U x 31.5 in. W x includes top panel, no side panels, black 44.2 in. D, perforated front door, N-SERIES TERAFRAME NETWORK CABINETS WITH NETWORK SWITCH EXHAUST DUCT perforated rear double door, includes Anixter No. Vendor No. Description Network Switch Exhaust Duct, two power 353010 NF1J-213C-C42 N-Series TeraFrame Network Cabinet, 45U supply exhaust ducts, top panel and two x 31.5 in. W x 43.2 in. D, perforated front solid side panels, black door, perforated rear double door, 425307 NF4M-113C-C42 Recommended solution for the Juniper includes Network Switch Exhaust Duct, Networks EX8208 and EX8216 switches: top panel and two solid side panels, black N-Series TeraFrame Network Cabinet, 45U 353011 NF1P-213C-C42 N-Series TeraFrame Network Cabinet, 45U x 31.5 in. W x 46.1 in. D, perforated front x 31.5 in. W x 48.1 in. D, perforated front door, perforated rear double door, door, perforated rear double door, includes Network Switch Exhaust Duct, includes Network Switch Exhaust Duct, top panel, two solid side panels, black top panel and two solid side panels, black 419228 NF5U-143C-C42 Recommended solution for the Cisco 353012 NF1J-213C-C40 N-Series TeraFrame Network Cabinet, 45U Nexus 7018 switch: N-Series TeraFrame x 31.5 in. W x 43.2 in. D, perforated front Network Cabinet, 45U x 40.0 in. W x door, perforated rear double door, 51.5 in. D, perforated front double door, includes Network Switch Exhaust Duct, perforated rear double door, inlcudes top panel, no side panels, black Network Switch Exhaust Duct, with visor 353013 NF1P-213C-C40 N-Series TeraFrame Network Cabinet, 45U and diffuser, top panel and two solid side x 31.5 in. W x 48.1 in. D, perforated front panel kits, black door, perforated rear double door, N-SERIES TERAFRAME NETWORK CABINET ACCESSORIES includes Network Switch Exhaust Duct, Anixter No. Vendor No. Description top panel, no side panels, black 324470 34538-000 2U snap-in filler panel, 19 in. W, plastic, black, one each 353015 34628-C01 N-Series caster kit, black 353016 34680-005 Cable management fingers kit, 45U Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.5 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Cabinets;Accessories/17902 Index1.Support and Supplies//Physical Support Structure//Cabinets MEGAFRAME CABINETS Power and Cooling Solutions for CPI Racks and Cabinets Anixter No. Vendor No. Description 220435 M1033-731 84 in. H (45U) x 27.3 in. W x 33.6 in. D, CHATSWORTH PRODUCTS INC (CPI) PR6792V2-142734.eps square-punched rails, vented plexiglass front/perforated metal rear door, black 371084 M1043-741 84 in. H (45U) x 27.3 in. W x 42.6 in. D, square-punched rails, perforated metal front/perforated metal rear door, black 283410 M1051-711 84 in. H (45U) x 27.3 in. W x 39.6 in. D, tapped rails, plexiglass front/metal rear door 220439 M1034-701 84 in. H (45U) x 27.6 in. W x 32.1 in. D, square-punched rails, without side panels, no doors, black CPI offers a large variety of power and thermal management products to complete your rack or cabinet system. MEGAFRAME ACCESSORIES Please see the Power, Cooling and Environmental Monitoring section Anixter No. Vendor No. Description for more information. 191527 12480-701 Cooling fan kit, 400 cfm, 115 V AC, black 283414 13203-001 M-Series caster set of four Cabinets;Free-standing, Network and Server/2523 Index1.Support and Supplies//Physical Support Structure//Cabinets Cabinets;Free-standing, Network and Server/2715 Index1.Support and Supplies//Physical Support Structure//Cabinets M-Series MegaFrame Cabinet System C-Series SlimFrame Cabinet System CHATSWORTH PRODUCTS INC (CPI) PR6814V2-143895.eps CHATSWORTH PRODUCTS INC (CPI) PR6805V2-143889.eps D FEATURES The C-Series SlimFrame Cabinet System is similar in design and style to the M-Series • Available in two widths: 27.3 in. or 31.3 in. MegaFrame Cabinet System but is only 24 in. wide to match standard raised access • Available in three heights: 38U, 42U, 45U floor tiles. The C-Series SlimFrame Cabinet System can also be delivered • Available in four depths: 27.6 in., 33.6 in., 39.6 in. or 42.6 in. partially assembled. • Specialized support and integrated cable management to match data/network FEATURES equipment requirements • Available in one width: 24 in. W • Bolted construction allows partially assembled delivery for easy staging and • Available in three heights: 37U, 40U, 43U prebuild movement on the job site • Available in three depths: 25.5 in., 33.6 in. or 39.6 in. • All-aluminum construction weighs less than similar steel cabinets • Stylish two-tone finish with raised panel doors • Includes two pair of 19 in. wide EIA-310-E or 23 in. wide mounting rails with • Fits over a single 2 ft. floor tile for maximum use of floor space Universal hole spacing • Specialized support and integrated cable management to match • Static load rating of 2,000 lb. (also on casters) server requirements • Stylish two-tone finish with raised panel doors • Bolted construction allows partially assembled delivery for easy staging and • The part numbers listed below are just some of the available configurations prebuild movement on the job site • Contact sales for the M-Series MegaFrame configuration that best fits • All-aluminum construction - weighs less than similar steel cabinets your applications • Includes two pair of 19 in. wide EIA-310-E mounting rails with Universal hole spacing • Static load rating of 2,000 lb. on casters • The part numbers listed below are just some of the available configurations • Contact sales for the C-Series SlimFrame configuration that best fits your applications Request the latest literature and guides from Anixter. 4.6 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) SLIMFRAME CABINETS • Ships fully assembled • Other options available; contact sales Anixter No. Vendor No. Description Anixter No. Vendor No. Description 444263 C1033-731 84 in. H (43U) x 24 in. W x 33.6 in. D, square-punched rails, vented plexiglass 249584 11972-712 84 in. H (43U) x 27.3 in. W x 39.6 in. D, front/perforated metal rear door, black plexiglass front, metal rear, black 237089 C1053-741 84 in. H (43U) x 24 in. W x 39.6 in. D, 249585 11973-712 84 in. H (43U) x 27.3 in. W x 39.6 in. D, no square-punched rails, perforated metal sides, plexiglass front, metal rear, black front/perforated metal rear door, black 249586 11974-702 84 in. H (43U) x 27.6 in. W x 38.1 in. D, 444268 C1050-711 84 in. H (43U) x 24 in. W x 39.6 in. D, frame only tapped rails, plexiglass front/metal rear Cabinets;Wall-mount/2497 Index1.Support and Supplies//Physical Support Structure//Cabinets door, black CUBE-iT PLUS Cabinet System 444269 C1034-701 84 in. H (43U) x 24 in. W x 32.1 in. D, square-punched rails, without side CHATSWORTH PRODUCTS INC (CPI) PR23428V2-164887.eps panels, no doors, black SLIMFRAME ACCESSORIES Anixter No. Vendor No. Description 191527 12480-701 Cooling fan kit, 400 cfm, 115 V AC, black 283468 13204-001 C-Series caster, set of four Cabinets;Free-standing, Seismic/3825 Index1.Support and Supplies//Physical Support Structure//Cabinets Seismic Frame Cabinet System CHATSWORTH PRODUCTS INC (CPI) pr5197V2-143862.eps The CUBE-iT PLUS Cabinet System is a series of wall-mounted and floor-supported telecommunications enclosures designed to secure communications equipment for a cross connect. Available in five heights, 18 sizes. There are two basic cabinet styles: wall-mounted and wall-mounted/floor-supported. The 24 in., 36 in. and 48 in. H cabinets are wall-mounted and support 200 lb. The 60 in. and 72 in. H cabinets are wall-mounted and floor-supported by a wheeled base under the main body of the cabinet and support 1,000 lb. Provides a secure wall-mounted enclosure for small amounts of network and security equipment when storage space is limited and equipment security is required. FEATURES The seismic-rated MegaFrame Cabinet System is for use in public network facilities or • UL Listed (24 in., 36 in., 48 in. H wall-mount cabinets only) on the customer premises to support mission-critical equipment. • Locking solid panel front door, locking 5 in. deep subpanel, keyed alike FEATURES • Includes one pair of adjustable depth threaded equipment mounting rails • Compliant to Bellcore GR-63-CORE Standard for Zone 4 Earthquake requirements • 19 in. wide, EIA-310-E compliant Universal hole pattern (5/8 in.-5/8 in.-1/2 in.) • Certified to an 800 lb. distributed equipment load • Vented side panels, add fan kits to increase air changes • Aluminum outer frame with steel inner frame delivers maximum strength with • Multiple conduit knockouts on the rear subpanel minimum weight • Contact your local sales representative for accessories not shown below • Seismic bracing kits and a full line of structural enhancement products are CUBE-IT PLUS WALL-MOUNTED CABINETS, SOLID FRONT DOORS available to support a wide range of site-specific structural requirements Anixter No. Vendor No. Description • Internal cable management, which includes two vertical cabling ring sections, 249587 11890-724 24 in. H x 18 in. D, 12U, black provides flexibility for wire routing and fits on-site customization • Adjustable front-to-rear vertical mounting rails allow use as a standard 249588 11840-724 24 in. H x 24 in. D, 12U, black four-post cabinet or two-channel rack 249589 11996-724 24 in. H x 30 in. D, 12U, black • Square-punched vertical mounting rails provide greater rack-mounting flexibility 249590 11890-736 36 in. H x 18 in. D, 18U, black • Aluminum top panel with four edge-protected punch-out ports accommodate 249591 11840-736 36 in. H x 24 in. D, 18U, black built-in cable management 249592 11996-736 36 in. H x 30 in. D, 18U, black • Includes two pair of 19 in. wide EIA-310-E mounting rails with Universal 249593 11890-748 48 in. H x 18 in. D, 26U, black hole spacing 249594 11840-748 48 in. H x 24 in. D, 26U, black 249595 11996-748 48 in. H x 30 in. D, 26U, black Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.7 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) • Ships fully assembled with mounting hardware (continued) CUBE-iT PLUS Cabinet System • Static load rating is 100 lb. CUBE-IT PLUS WALL-MOUNTED, FLOOR-SUPPORTED CABINETS, SOLID FRONT DOORS • Color options are gray, white or black (change part no. suffix to -1xx for gray or Anixter No. Vendor No. Description -2xx for white or -7xx for black) 371828 13491-760 60 in. H x 18 in. D, 33U, black Anixter No. Vendor No. Description 371833 13492-760 60 in. H x 24 in. D, 33U, black 283473 13050-713 26 in. H x 26 in. W x 12 in. D, 6U, black 371834 13493-760 60 in. H x 30 in. D, 33U, black 283474 13050-721 36 in. H x 26 in. W x 5 in. D, 2U, black 371836 13491-772 72 in. H x 18 in. D, 40U, black 283476 13050-722 36 in. H x 26 in. W x 8.5 D, 4U, black 371837 13492-772 72 in. H x 24 in. D, 40U, black 283477 13050-723 36 in. H x 26 in. W x 12 in. D, 6U, black 371838 13493-772 72 in. H x 30 in. D, 40U, black Racks;Two-post/2498 Index1.Support and Supplies//Physical Support Structure//Racks CUBE-IT PLUS ACCESSORIES Standard Rack Anixter No. Vendor No. Description CHATSWORTH PRODUCTS INC (CPI) PR23426V2-164878.eps 262780 12804-701 Fan kit, 115 V AC, 100 cfm, black 267380 12805-701 Fan filter kit, black 267382 12806-001 Fan replacement filters, pack of six 267384 12796-501 19 in. W x 3U mounting bracket for rear subpanel 263836 12820-703 Power strip, eight outlet (NEMA 5-15R), 115 V AC, 15 amp, surge-protected, 10 ft. L cord, NEMA 5-15P plug Contact your local sales representative for information about plexiglass front doors. Provides direct support for panel-mount equipment, such as patch panels and network switches and may be adapted with rack shelves to support computer/data Cabinets;Wall-mount/11379 Index1.Support and Supplies//Physical Support Structure//Cabinets storage equipment. ThinLine II Wall-mount Cabinet D FEATURES CHATSWORTH PRODUCTS INC (CPI) PR23419V2-164907.eps • EIA-310-E compliant Universal hole pattern (5/8 in.-5/8 in.-1/2 in.) • #12-24 tapped equipment mounting holes • Rack-mount spaces (U) are marked and numbered to simplify equipment installation • 3 in. deep equipment mounting channels • 1,000 pound equipment load bearing capacity (must be evenly distributed) • Includes assembly hardware and 50 each #12-24 mounting screws • Must be secured to building structure; order installation hardware separately • UL Listed • Other sizes available 19 IN. W X 45U RACKS The space-saving ThinLine II safely secures 19 in. rack-mount network equipment with minimal intrusion into the room. Individual rails can be easily rotated for Anixter No. Vendor No. Description horizontal or vertical mounting and then bolted into place, making patch panel 179805 55053-103 7 ft. H x 19 in. W x 3 in. D, 45U, gray punch-down easier. The cabinet can hold a server, switch, horizontal cable manager, 170171 55053-203 7 ft. H x 19 in. W x 3 in. D, 45U, white patch panel, fiber service loop and fiber optic patch panel with room to RACK ACCESSORIES accommodate additional mounting needs. Anixter No. Vendor No. Description In addition, the 26 in. H cabinet can be mounted so that the removable "top" panel 125458 40604-001 Installation kit, concrete slab floor, becomes a side panel. A 4 in. x 6 in. opening in the rear of the cabinet and 3/4 in. and 3/8 in. hardware, zinc 1 1/2 in. diameter knockouts allow cable entry and exit. 178458 40607-001 Installation kit, wood floor, zinc FEATURES 173601 30026-703 3U filler panel • Door features rounded edges and corners and can be mounted to open from 173599 30026-702 2U filler panel either right or left 317881 40604-003 Concrete floor installation kit, 1/2 in. • Removable top panel provides direct access to equipment without disturbing hardware, zinc other devices • Louvers and optional fan accessory provide ventilation • Cabinet includes a 2 in. x 4 in. junction box to hold an optional surge-suppressed duplex outlet, eliminating the need for a power strip Request the latest literature and guides from Anixter. 4.8 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Racks;Two-post/2641 Index1.Support and Supplies//Physical Support Structure//Racks ACCESSORIES Universal Rack Anixter No. Vendor No. Description 125458 40604-001 Installation kit, concrete slab floor, CHATSWORTH PRODUCTS INC (CPI) pr5227V2-143879.eps 3/8 in. hardware, zinc 178458 40607-001 Installation kit, wood floor, zinc 173599 30026-702 2U filler panel 173601 30026-703 3U filler panel Racks;Two-post, Seismic/15563 Index1.Support and Supplies//Physical Support Structure//Racks Seismic Frame Two-post Rack CHATSWORTH PRODUCTS INC (CPI) PR23422V2-164906.eps Provides direct support for panel-mount equipment, such as patch panels and network switches and may be adapted with rack shelves to support computer/data storage equipment. FEATURES • EIA-310-E compliant Universal hole pattern (5/8 in.-5/8 in.-1/2 in.) • #12-24 tapped equipment mounting holes • Rack-mount spaces (U) are marked and numbered to simplify equipment installation The Seismic Frame Two-post Rack is designed specifically to support network • 3 in. D equipment mounting channels equipment in areas with seismic activity. The welded steel frame of the Seismic Frame • 1,500 pound equipment load bearing capacity Two-post Rack resists the swaying motion caused by earthquakes to reduce the • Includes assembly hardware and 50 each #12-24 mounting screws amount of vibration transferred through the rack to equipment and is less likely to be • Must be secured to building structure; order installation hardware separately damaged during a seismic event than non-seismic racks, which means quicker • Other sizes and colors available network recovery times. SEVEN FOOT RACKS, 45U FEATURES Anixter No. Vendor No. Description • 19 in. or 23 in. equipment support on threaded or square-punched 184202 46383-703 84 in. H x 23 in. W, black mounting rails 164164 46353-703 84 in. H x 19 in. W, black • Equipped with two pairs of adjustable depth mounting rails 147836 46353-203 84 in. H x 19 in. W, white • Rack-mount spaces (U) are marked and numbered on rails and rails 125448 46383-103 84 in. H x 23 in. W, gray are reversible • Fully bonded frame construction with two masked grounding locations 102060 46353-103 84 in. H x 19 in. W, gray • Includes one two-mounting hole ground terminal block 086047 46353-503 84 in. H x 19 in. W, clear • Convenient power and cable distribution to equipment with unique built-in 162466 48353-503 84 in. H x 19 in. W, UL Listed, clear mounting locations for attaching T-shaped cable management fingers and SEVEN AND 1/2 FOOT RACKS, 48U vertical power strips Anixter No. Vendor No. Description • Independently seismic tested and certified; meets Telcordia Technologies, Inc. GR-63-CORE Network Equipment Building Systems (NEBS) Zone 4 requirements 193489 46353-705 90 in. H x 19 in. W, black • High strength steel body, welded construction 155766 46353-505 90 in. H x 19 in. W, clear • 1,000 lb. load rating 160238 46353-105 90 in. H x 19 in. W, gray • Ships fully assembled EIGHT FOOT RACKS, 51U SEISMIC FRAME TWO-POST RACK Anixter No. Vendor No. Description Anixter No. Vendor No. Description 095976 46353-515 96 in. H x 19 in. W, clear 377873 13853-703 7 ft. H x 19 in. W, 44U, #12-24 threaded, 164557 46353-215 96 in. H x 19 in. W, white zinc rails, black 198924 46353-715 96 in. H x 19 in. W, black 377874 13854-703 7 ft. H x 19 in. W, 44U, square-punched, 164780 46383-215 96 in. H x 23 in. W, white zinc rails, black SIX FOOT RACKS, 38U 377875 13855-703 7 ft. H x 19 in. W, 44U, #12-24 threaded, painted rails, black Anixter No. Vendor No. Description 377876 13856-703 7 ft. H x 19 in. W, 44U, square-punched, 128266 46353-501 72 in. H x 19 in. W, clear painted rails, black Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.9 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Racks;Four-post/15564 Index1.Support and Supplies//Physical Support Structure//Racks (continued) Seismic Frame Two-post Rack Adjustable Rail QuadraRack (ARQR) and Adjustable Rail ACCESSORIES ServerRack (AQSR) Anixter No. Vendor No. Description CHATSWORTH PRODUCTS INC (CPI) PR23423V2-164884.eps 377886 13704-703 Seismic frame two-post rack vertical cabling section, black 377887 13699-701 VCS Vertical Cabling Section offset mounting bracket kit, black 377889 13969-001 Cable management fingers kit, single-sided, black 377890 13969-002 Cable management fingers kit, double-sided, black 377891 12575-701 Top-Mount Cable Waterfall Tray, black 377893 13697-001 Vertical power strip mounting hardware kit, clear The Adjustable Rail QuadraRack (ARQR) and the Adjustable Rail ServerRack (ARSR) 377894 13698-001 Duplex electrical outlet box, zinc provide sturdy, versatile solutions for supporting rack-mount security, network, 377895 13702-001 Seismic frame two-post rack concrete computer server and data storage equipment in data centers, computer equipment floor anchor kit, zinc rooms and other IT facilities. Both racks offer the strength and stability of an enclosure in an open four-post mounting system that provides easy access to Racks;Two-post/2451 Index1.Support and Supplies//Physical Support Structure//Racks equipment and cabling. Available in 23.62 in. or 35.43 in. fixed depth four-post 6 in. Deep Standard Racks frames with adjustable rear mounting rails, the front-to-rear mounting depths of the CHATSWORTH PRODUCTS INC (CPI) PR20307V2-71433.eps ARQR and ARSR are adjustable, helping to match equipment mounting requirements. The ARQR contains #12-24 threaded mounting rails for data communications applications and the ARSR has square-punched mounting rails for server and data storage applications. Each rack includes a Top-Mount Cable Waterfall Tray with an adjustable radius drop to provide easy side-to-side routing of patch cords and D enhanced cable management. The ARQR and ARSR can be used with any CPI cabling section or Cable Guide Kit and allows for the attachment of CPI Cable Runway to the top of the rack with J-bolts, a Cable Runway Elevation Kit or a Cable Runway Mounting Bracket. FEATURES • Available in three heights and two depths Provides direct support for panel-mount equipment, such as patch panels and • 19 in. equipment support on threaded or square-punched EIA-310-E mounting network switches. May be adapted with brackets to support block termination rails with Universal hole spacing hardware, such as 66-style and 110-style blocks. Features six inch deep upright • Rack-mount spaces (U) are marked and numbered on front mounting rails mounting channels for MDF, IDF or other high-capacity distribution frame • Front mount rails can be flipped so that rack-mount space (U) numbering can applications. The additional depth provides extra room for high-density equipment start at the top or the bottom and cable needs. • Rear mounting rails adjust in depth to match equipment requirements FEATURES • Includes one Top-Mount Cable Waterfall Tray with adjustable radius drops • Strong, lightweight aluminum construction, bolted assembly • Includes one Two Mounting Hole Ground Terminal Block and • Available in 19 in., 23 in. or 35 in. rack widths antioxidant compound • Mounting channels are threaded #12-24 • Steel construction • 45U of rack-mount space • Static load rating of 2,200 lb. • Rack-mount spaces (U) are marked and numbered to simplify • UL Listed 60950 equipment installation ADJUSTABLE RAIL QUADRARACK AND SERVERRACK • Supports up to 1,000 pounds of equipment Anixter No. Vendor No. Description • Includes assembly hardware and 50 each #12-24 mounting screws 377902 15251-703 84 in. H (45U) x 23.6 in. W x 23.62 in. D, • Use accessory rack installation kit (40604-001) to mount securely to floor #12-24 threaded rails, black Anixter No. Vendor No. Description 375571 15252-703 84 in. H (45U) x 23.6 in. W x 35.43 in. D, 181820 66383-503 7 ft. H x 23 in. W, clear #12-24 threaded rails, black 167245 66353-503 7 ft. H x 19 in. W, clear 377903 15253-703 84 in. H (45U) x 23.6 in. W x 23.62 in. D, 174140 66353-703 7 ft. H x 19 in. W, black square-punched rails, black 377904 15254-703 84 in. H (45U) x 23.6 in. W x 35.43 in. D, square-punched rails, black Request the latest literature and guides from Anixter. 4.10 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Racks;Four-post/3819 ACCESSORIES Index1.Support and Supplies//Physical Support Structure//Racks Anixter No. Vendor No. Description QuadraRack 4-Post Frame 377905 15285-701 Equipment support rail, 23.62 in. D, CHATSWORTH PRODUCTS INC (CPI) pr5814V2-9681.eps 200 lb. capacity, black 377906 15285-702 Equipment support rail, 35.43 in. D, 200 lb. capacity, black 377907 15275-701 Top-Mount Cable Waterfall Tray, 6 in. W x 5.2 in. D, black 377908 15286-003 Cable Guide Kit, 45U rack, snaps to one mounting rail, aligns to U locations, black Racks;Four-post/14622 Index1.Support and Supplies//Physical Support Structure//Racks Adjustable ServerRack and Adjustable QuadraRack The QuadraRack 4-Post Frame provides direct support for data/network equipment CHATSWORTH PRODUCTS INC (CPI) PR20302V2-71440.eps with two pairs of fixed-position threaded equipment mounting channels. FEATURES • 19 in. wide x 29 in. deep threaded equipment mounting channels with EIA-310-E Universal hole spacing • Supports up to 2,000 pounds of equipment • Includes assembly hardware and 100 each #12-24 mounting screws • Must be secured to building structure; order installation hardware separately • Other sizes and colors available • Two-post racks can be converted into four-post racks with the CPI ExpandaRack - call your local sales representative for details Anixter No. Vendor No. Description The Adjustable ServerRack and Adjustable QuadraRack are four-post frames that can 249553 50120-703 7 ft. H x 19 in. W x 29 in. D, 45U, black be adjusted in depth in 1 in. increments during assembly. Each rack has seven depth 249554 50120-715 8 ft. H x 19 in. W x 29 in. D, 51U, black settings. The Adjustable ServerRack has square-punched mounting rails that allow the thread to be changed to match server equipment requirements, and the Racks;Four-post/10320 Index1.Support and Supplies//Physical Support Structure//Racks Adjustable QuadraRack has threaded #12-24 equipment mounting holes for quick QuadraRack ServerFrame installation of patch panels and switches. CHATSWORTH PRODUCTS INC (CPI) PR6798V2-36184.eps FEATURES • 19 in. W, adjustable depth four-post frame • Threaded or square-punched equipment mounting channels with EIA-310-E Universal hole spacing • Supports up to 2,000 lb. of equipment • Includes assembly and rack-mount hardware • Must be secured to building structure; order installation hardware separately • Other sizes and colors available ADJUSTABLE SERVERRACK (SQUARE-PUNCHED) The QuadraRack ServerFrame provides direct support for server equipment with two Anixter No. Vendor No. Description pairs of fixed-position square-punched equipment mounting channels. 353022 15211-703 7 ft. H x 19 in. W x 15.7 in. to 21.6 in. D, 45U, black FEATURES • 19 in. wide x 29 in. deep square-punched equipment mounting channels with ADJUSTABLE QUADRARACK (THREADED #12-24) EIA-310-E Universal hole spacing Anixter No. Vendor No. Description • Supports up to 1,000 pounds of equipment 353024 15215-703 7 ft. H x 19 in. W x 15.7 in. to 21.6 in. D, • Includes assembly hardware, order mounting hardware separately 45U, black • Must be secured to building structure; order installation hardware separately ADJUSTABLE QUADRARACK ACCESSORIES QUADRARACK SERVERFRAME Anixter No. Vendor No. Description Anixter No. Vendor No. Description 353026 15255-701 Vented shelf, 19 in. W x 1U x 13.8 in. D, 267550 15053-103 7 ft. H x 19 in. W x 29 in. D, 45U, gray for 15.7 in. to 21.6 in. D rack, 200 lb. 267549 15053-203 7 ft. H x 19 in. W x 29 in. D, 45U, white capacity, black 251149 15053-703 7 ft. H x 19 in. W x 29 in. D, 45U, black Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.11 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) 73.5 IN. H X 19 IN. W, 41U (continued) QuadraRack ServerFrame Anixter No. Vendor No. Description QUADRARACK SERVERFRAME ACCESSORIES 267493 11792-725 25 in. D, black Anixter No. Vendor No. Description 249532 11792-718 18 in. D, black 226487 12637-001 M6 cage nuts and mounting screws, 249533 11792-712 12 in. D, black 25 pkg., gold CABLE MANAGEMENT RINGS 246971 12638-001 #10-32 cage nuts and mounting screws, 25 pkg., zinc Anixter No. Vendor No. Description 246967 12639-001 #12-24 cage nuts and mounting screws, 249534 11799-001 Set of six, black 25 pkg., black Racks;Wall-mount/13410 Index1.Support and Supplies//Physical Support Structure//Racks Racks;Wall-mount/2503 Index1.Support and Supplies//Physical Support Structure//Racks EasySwing Wall-mount Rack Standard Swing Gate Wall Rack CHATSWORTH PRODUCTS INC (CPI) PR12031V2-21862.eps CHATSWORTH PRODUCTS INC (CPI) pr5204V2-143867.eps A cost-effective 19 in. EIA swing-gate wall rack for mounting network, Provides easy access to the rear of wall-mounted equipment. communications and security equipment. FEATURES FEATURES D • 19 in. wide EIA-310-E threaded equipment mounting channnels with Universal • Supports up to 85 lb. hole spacing • Ships fully assembled and flat; simply unfold and mount to wall • 100 lb. equipment load capacity, open or closed position • Includes (12) #12-24 equipment mounting screws • Pivots open to the right or left, latches in the closed position • 19 in. wide EIA-310-E threaded equipment mounting rails with Universal • UL Listed hole spacing • Includes assembly and installation hardware • Opens 180° to the right or left • Includes 50 each #12 to 24 equipment mounting screws • Keyhole wall-mounting holes with mounting template included on carton • Other sizes and colors available • Includes reusable cable management straps • Order 1/4 in. installation hardware separately 24.5 IN. H X 19 IN. W, 13U Anixter No. Vendor No. Description Anixter No. Vendor No. Description 318650 13602-708 24.5 in. H x 8 in. D, 11U, black 267488 11790-725 25 in. D, black 318651 13602-712 24.5 in. H x 12 in. D, 11U, black 239729 11790-718 18 in. D, black 318652 13602-718 24.5 in. H x 18 in. D, 11U, black 249526 11790-712 12 in. D, black 318655 13604-712 38.5 in. H x 12 in. D, 19U, black 38.5 IN. H X 19 IN. W, 21U 318656 13604-718 38.5 in. H x 18 in. D, 19U, black Anixter No. Vendor No. Description 318658 13608-712 51.5 in. H x 12 in. D, 26U, black 267489 11791-725 25 in. D, black 239731 11791-718 18 in. D, black 240470 11791-712 12 in. D, black 49.0 IN. H X 19 IN. W, 27U Anixter No. Vendor No. Description 267491 11807-725 25 in. D, black 249531 11807-718 18 in. D, black 249527 11807-712 12 in. D, black Request the latest literature and guides from Anixter. 4.12 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Racks;Wall-mount/2499 Index1.Support and Supplies//Physical Support Structure//Racks existing racks to accommodate one or more servers instead of reverting to a four-post rack or cabinet system. Fixed Wall-mount Equipment Rack FEATURES CHATSWORTH PRODUCTS INC (CPI) pr5801V2-9660.eps • Adjustable mounting arms extend between 9 in. and 13 in. in 0.5 in. increments to adapt to your server's depth • Square holes at the front of adjustable mounting arms fit any server's cage nuts • Supplementary arms (purchased separately) provide extra support • Load rating: 1U bracket is 80 lb., 2U bracket is 120 lb. Anixter No. Vendor No. Description 267246 12751-719 19 in. W x 1U, black 267555 12752-719 19 in. W x 2U, black 267247 12759-701 Supplementary support arms, black Shelves;Rack Shelves/2506 Index1.Support and Supplies//Physical Support Structure//Accessories Provides fixed wall-mounted support for rack-mount telecommunications equipment where storage space is limited. Single-sided Rack Shelves FEATURES CHATSWORTH PRODUCTS INC (CPI) pr5222V2-143875.eps • 19 in. wide EIA-310-E threaded equipment mounting channels with Universal hole spacing • Three height options: 13U, 21U, 41U • Three depth options: 6 in., 12 in., 18 in. • Supports up to 200 lb. of equipment • Includes assembly and installation hardware • Attach to a plywood backer board • Other sizes and colors available 19 IN. W X 24.5 IN. H (13U) WALL-MOUNT EQUIPMENT RACKS Anixter No. Vendor No. Description Use on CPI Universal or Standard Racks to support equipment up to 15 inches deep 239705 11960-718 18 in. D, black and weighing up to 50 pounds. 239703 11960-712 12 in. D, black FEATURES 239701 11960-706 6 in. D, black • 19 in. shelf supports equipment up to 17.25 in. W 19 IN. W X 38.5 IN. H (21U) WALL-MOUNT EQUIPMENT RACKS • 23 in. shelf supports equipment up to 21.25 in. W • Usable depth is 14.82 in. Anixter No. Vendor No. Description • Requires 3U of rack-mount space 239722 11961-718 18 in. D, black • Supports up to 50 lb. of equipment 239720 11961-706 6 in. D, black • Mounting hardware is not included, use Part No. 128493 19 IN. W X 73.5 IN. H (41U) WALL-MOUNT EQUIPMENT RACKS • Also available with a vented support surface Anixter No. Vendor No. Description SINGLE-SIDED SHELVES FOR 19 IN. RACKS 239725 11962-706 6 in. D, black Anixter No. Vendor No. Description Racks;Accessories/10334 Index1.Support and Supplies//Physical Support Structure//Accessories 080570 40074-100 Single-sided shelf, 3U x 19 in. W x 15 in. D, 50 lb. capacity, gray AnyServer Bracket 106290 40074-500 Single-sided shelf, 3U x 19 in. W x 15 in. CHATSWORTH PRODUCTS INC (CPI) PR6801V2-143886.eps D, 50 lb. capacity, clear 171339 40074-700 Single-sided shelf, 3U x 19 in. W x 15 in. D, 50 lb. capacity, black SINGLE-SIDED SHELVES FOR 23 IN. RACKS Anixter No. Vendor No. Description 127008 40075-100 Single-sided shelf, 3U x 23 in. W x 15 in. D, 50 lb. capacity, gray 133461 40075-500 Single-sided shelf, 3U x 23 in. W x 15 in. D, 50 lb. capacity, clear 184204 40075-700 Single-sided shelf, 3U x 23 in. W x 15 in. The AnyServer Bracket is a simple, yet sturdy, solution to secure virtually any server to D, 50 lb. capacity, black a 19 in. wide, two-post open rack. It is the ideal, cost-effective system for retrofitting Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.13 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Shelves;Rack Shelves/2507 Shelves;Rack Shelves/3820 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Double-sided Rack Shelves QuadraRack Shelves CHATSWORTH PRODUCTS INC (CPI) pr5223V2-143876.eps CHATSWORTH PRODUCTS INC (CPI) pr5811V2-9675.eps Use on CPI Universal or Standard Rack to support equipment up to 21 3/4 in. deep Use to support equipment up to 29 in. deep and weighing up to 200 lb. on and weighing less than 100 pounds that is not designed for direct rack mounting. QuadraRack 4-post Frame and QuadraRack ServerFrame. FEATURES FEATURES • 19 in. rack shelf supports equipment up to 17.75 in. wide • 19 in. shelf provides 17.25 in. W x 29 in. D surface • 23 in. rack shelf supports equipment up to 21.75 in. wide • Uses 1U of rack-mount space • Usable depth is 21.75 in. • Supports up to 200 lb. • Requires 4U of rack-mount space • Available in other colors • Supports up to 100 lb. of equipment Anixter No. Vendor No. Description • Mounting hardware not included, use Part No. 128493 249555 16351-719 Heavy-duty fixed shelf, solid, 1U x 19 in. W • Also available as vented and in other colors x 29 in. D, 200 lb. capacity, black 249556 16350-719 Heavy-duty fixed shelf, vented, 1U x 19 in. DOUBLE-SIDED SHELVES FOR 19 IN. RACKS W x 29 in. D, 200 lb. capacity, black Anixter No. Vendor No. Description D 133459 40108-119 Double-sided shelf, 4U x 19 in. W x Shelves;Rack and Cabinet Shelves/10326 Index1.Support and Supplies//Physical Support Structure//Accessories 21.5 in. D, 100 lb. capacity, gray Extra-heavy-duty Four-point Sliding Shelf 156072 40108-219 Double-sided shelf, 4U x 19 in. W x CHATSWORTH PRODUCTS INC (CPI) PR6799V2-143885.eps 21.5 in. D, 100 lb. capacity, white 132493 40108-519 Double-sided shelf, 4U x 19 in. W x 21.5 in. D, 100 lb. capacity, clear 171338 40108-719 Double-sided shelf, 4U x 19 in. W x 21.5 in. D, 100 lb. capacity, black DOUBLE-SIDED SHELVES FOR 23 IN. RACKS Anixter No. Vendor No. Description 133450 40108-123 Double-sided shelf, 4U x 23 in. W x 21.5 in. D, 100 lb. capacity, gray FEATURES 133449 40108-523 Double-sided shelf, 4U x 23 in. W x • Flexible cable management belt eliminates kinking, bending or cutting of cable 21.5 in. D, 100 lb. capacity, clear • Adjustable mounting depth of 20 in. to 34 in. 184201 40108-723 Double-sided shelf, 4U x 23 in. W x • Provides 17.5 in. W x 26 in. D surface 21.5 in. D, 100 lb. capacity, black • Expands 24 in.; locks in fully closed or open position • Other widths available Anixter No. Vendor No. Description 267554 12700-119 Extra-heavy-duty four-point sliding shelf, 2U x 19 in. W x 26 in. D, 300 lb. capacity, gray 267553 12700-219 Extra-heavy-duty four-point sliding shelf, 2U x 19 in. W x 26 in. D, 300 lb. capacity, white 265966 12700-719 Extra-heavy-duty four-point sliding shelf, 2U x 19 in. W x 26 in. D, 300 lb. capacity, black Request the latest literature and guides from Anixter. 4.14 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Shelves;Cabinet Shelves/2493 Drawers;Rack and Cabinet Storage Drawers/11414 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Cabinet System Shelves Lockable Storage Drawers CHATSWORTH PRODUCTS INC (CPI) pr5198V2-143863.eps CHATSWORTH PRODUCTS INC (CPI) PR9859V2-9749.eps Use to support equipment that is not designed for direct rack mounting in any CPI CPI's Lockable Storage Drawer keeps backup media, software, manuals, laptops, test Cabinet System (M-Series MegaFrame, C-Series SlimFrame, Seismic Frame, E-Series equipment and extra patch cords in close proximity to where they are typically used. ISP Co-Location, GF-Series GlobalFrame, F-Series TeraFrame or N-Series TeraFrame They are available for 19 in. or 23 in. wide racks and cabinets. Includes attachment Cabinets). 32 inch deep vented sliding shelf (Part No. 227315) is shown. Styles vary brackets that allow center mounting on two-post racks with 3 in. or 6 in. deep slightly model to model. equipment channels or front and rear attachment to four-post racks and cabinet systems with mounting rails that are adjusted between 24 in. and 39 in. in depth. FEATURES FEATURES • 19 in. wide x 2U shelves • Fixed or sliding (includes cable management arm) • Attaches to any CPI free-standing 19 in. wide or 23 in. wide rack or • Vented or solid shelf surface cabinet system • Use 24 in. deep versions in 30 in. deep cabinets • Available in three heights: 2U, 3U and 4U • Use 29 in. and 32 in. deep versions in 36 in. and 39 in. deep cabinets • Supports a 100 pound load (drawer and top surface combined) • Other sizes and colors available • Features 20 in. deep lockable drawer that extends full depth for easy access to stored equipment SOLID SHELVES FOR 19 IN. CABINETS 19 IN. RACK-MOUNT Anixter No. Vendor No. Description Anixter No. Vendor No. Description 531731 12334-119 Fixed shelf, solid, 24 in. D, 200 lb. capacity, gray 277373 13082-719 2U, black 219575 12334-519 Fixed shelf, solid, 24 in. D, 200 lb. 277374 13083-719 3U, black capacity, clear 277375 13084-719 4U, black 191515 12334-719 Fixed shelf, solid, 24 in. D, 200 lb. 23 IN. RACK-MOUNT capacity, black Anixter No. Vendor No. Description 546228 14070-719 Fixed shelf, solid, 29 in. D, 200 lb. 283697 13082-723 2U, black capacity, black 283698 13083-723 3U, black 191519 12345-719 Sliding shelf, solid, 24 in. D, 140 lb. 283700 13084-723 4U, black capacity, black DRAWER DIVIDERS 5 IN. WIDE SECTIONS VENTED SHELVES FOR 19 IN. CABINETS Anixter No. Vendor No. Description Anixter No. Vendor No. Description 283701 13185-701 Drawer divider for 3U and 4U only 191516 12335-719 Fixed shelf, vented, 24 in. D, 200 lb. capacity, black 545575 14072-719 Fixed shelf, vented, 29 in. D, 200 lb. capacity, black 191520 12346-719 Sliding shelf, vented, 24 in. D, 140 lb. capacity, black 227315 11913-719 Sliding shelf, vented, 32 in. D, 160 lb. capacity, black Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.15 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Cable Management;Vertical/15565 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description Evolution Vertical Cable Management 368556 35523-703 7 ft. H x 10 in. W x 24.5 in. D, Evolution g2 double-sided vertical cable CHATSWORTH PRODUCTS INC (CPI) PR34421V2-254400.eps manager, black 368555 35524-703 7 ft. H x 12 in. W x 24.5 in. D, Evolution g2 double-sided vertical cable manager, black 377910 35525-703 7 ft. H x 15 in. W x 24.5 in. D, Evolution g2 double-sided vertical cable manager, black 375567 35511-703 7 ft. H x 6 in. W x 13.2 in. D, Evolution g1 single-sided vertical cable manager, black 377911 35512-703 7 ft. H x 8 in. W x 13.2 in. D, Evolution Evolution Vertical Cable Management provides a solution for managing high-density g1 single-sided vertical cable cabling applications on open two-post and four-post CPI rack systems, delivering manager, black increased performance to match the demands of data center applications. Featuring easy-to-use doors with styling that complements the CPI TeraFrame family of 377912 35513-703 7 ft. H x 10 in. W x 13.2 in. D, Evolution cabinets, Evolution Cable Management provides innovative interior features to help g1 single-sided vertical cable maximize the capacity and utility of vertical and horizontal cable management. manager, black 375568 35514-703 7 ft. H x 12 in. W x 13.2 in. D, Evolution Evolution Vertical Cable Managers attach to the sides of racks to manage premise g1 single-sided vertical cable cables, patch cords and jumper cords. Double-sided g2 Evolution Vertical Cable manager, black Managers feature movable mid-sections that can be positioned for a 50/50, 40/60 or 60/40 front/rear split of the internal cable management space to match cabling 377913 35515-703 7 ft. H x 15 in. W x 13.2 in. D, Evolution requirements. The front door is secured by a spring-loaded two-point latch controlled g1 single-sided vertical cable by a single knob; simply turn the knob on the right or left side of the door and pull to manager, black swing the door open or turn both knobs to remove the door. 444289 35571-703 7 ft. H x 6 in. W x 20.2 in. D, Evolution D g3 combination vertical cable OPTIONS manager, black -Choose from combination, single- or double-sided vertical managers 444292 35572-703 7 ft. H x 8 in. W x 20.2 in. D, Evolution -Choose the two-post or four-post rack that best fits your equipment g3 combination vertical cable -Unique Cable Lashing Bar Kit for bundle control manager, black -Unique Fiber Segregation Kit to control fiber within the cabling section trough 444293 35573-703 7 ft. H x 10 in. W x 20.2 in. D, Evolution -Unique movable mid-section allows for adjustable front-to-back trough volume ratio g3 combination vertical cable manager, black FEATURES 444295 35574-703 7 ft. H x 12 in. W x 20.2 in. D, Evolution • 6 in., 8 in., 10 in., 12 in. and 15 in. wide models available to match your g3 combination vertical cable cable densities manager, black • 6 ft., 7 ft. and 8 ft. height models available to match your room design 444297 35575-703 7 ft. H x 15 in. W x 20.2 in. D, Evolution • T-shaped cable management cable guides align with rack-mount spaces (U) g3 combination vertical cable with decreased deflection for heavier Cat 6A cabling manager, balck • Rigid vertical manager trough supports heavy bundles of cable • Movable mid-section inside g2 double-sided managers for allocation of ACCESSORIES front-to-back volume/capacity Anixter No. Vendor No. Description • Rear cable rings with spin-open latches on the back of the g3 combination 377914 35475-701 Fiber segregation kit, black managers organize large cable bundles 377915 35473-001 Cable lashing bar kit • Rounded cable guide edges at the top to protect cable entrance and exit EVOLUTION VERTICAL CABLE MANAGEMENT Anixter No. Vendor No. Description 368557 35521-703 7 ft. H x 6 in. W x 24.5 in. D, Evolution g2 double-sided vertical cable manager, black 377909 35522-703 7 ft. H x 8 in. W x 24.5 in. D, Evolution g2 double-sided vertical cable manager, black Request the latest literature and guides from Anixter. 4.16 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Cable Management;Vertical/2505 Index1.Support and Supplies//Physical Support Structure//Accessories FEATURES VCS Vertical Cabling Sections • Front- and rear-facing troughs have 1U high openings on both sides for organizing patch cords/premise cable CHATSWORTH PRODUCTS INC (CPI) pr5217V2-143871.eps • Front- and rear-facing troughs have an integrated latch-closure door/cover that swings open to the right or left and may be removed • All cable openings front and rear are edge-protected • Available in three widths, match to height of supporting rack • Includes installation hardware, finish is black or clear, doors and cable guides are black • Other sizes are available DOUBLE-SIDED Anixter No. Vendor No. Description 236176 30094-503 MCS Master Cabling Section, Open vertical cable trough for use with Universal, Standard, and 6 in. deep Standard double-sided, 7 ft. H x 4.4 in. W x Racks and QuadraRacks. Use with racks that support patch panels when customers 16.15 in. D, clear want premise cable and patch cords in open view. Select to match the height of the 236177 30094-703 MCS Master Cabling Section, supporting rack. double-sided, 7 ft. H x 4.4 in. W x FEATURES 16.15 in. D, black • Front- and rear-facing troughs are completely open 236180 30095-503 MCS Master Cabling Section, • Rotating latches on 12 in. vertical intervals secure cables double-sided, 7 ft. H x 6 in. W x • Cable front-to-rear pass-through ports in-between each latch 16.15 in. D, clear • All cable openings are edge-protected 236182 30096-503 MCS Master Cabling Section, • Includes installation hardware double-sided, 7 ft. H x 10 in. W x • Other heights and colors available 16.15 in. D, clear 236183 30096-703 MCS Master Cabling Section, DOUBLE-SIDED double-sided, 7 ft. H x 10 in. W x Anixter No. Vendor No. Description 16.15 in. D, black 174145 12096-503 7 ft. H x 3.65 in. W x 12.75 in. D, clear SINGLE-SIDED 174146 12096-703 7 ft. H x 3.65 in. W x 12.75 in. D, black 166031 11729-503 7 ft. H x 6 in. W x 12.75 in. D, clear Anixter No. Vendor No. Description 174142 11729-703 7 ft. H x 6 in. W x 12.75 in. D, black 236170 30091-503 MCS Master Cabling Section, single-sided, 7 ft. H x 4.4 in. W x 8.08 in. D, clear SINGLE-SIDED 236171 30091-703 MCS Master Cabling Section, single-sided, Anixter No. Vendor No. Description 7 ft. H x 4.4 in. W x 8.08 in. D, black 164160 11374-703 7 ft. H x 6 in. W x 6.38 in. D, black 236172 30092-503 MCS Master Cabling Section, single-sided, 176096 11730-703 7 ft. H x 3.65 in. W x 6.38 in. D, black 7 ft. H x 6 in. W x 8.08 in. D, clear Cable Management;Vertical/2710 236173 30092-703 MCS Master Cabling Section, single-sided, Index1.Support and Supplies//Physical Support Structure//Accessories 7 ft. H x 6 in. W x 8.08 in. D, black MCS Master Cabling Section 236174 30093-503 MCS Master Cabling Section, single-sided, CHATSWORTH PRODUCTS INC (CPI) PR6815V2-36185.eps 7 ft. H x 10 in. W x 8.08 in. D, clear 236175 30093-703 MCS Master Cabling Section, single-sided, 7 ft. H x 10 in. W x 8.08 in. D, black Front-facing (single-sided) or combination front- and rear-facing (double-sided) vertical cable trough for use with Universal, Standard and 6 in. deep Standard Racks and QuadraRacks. Use with racks that support patch panels when customers want premise cable and patch cords hidden from view. Select to match the height of the supporting rack. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.17 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Cable Management;Vertical/11492 Cable Management;Vertical/17535 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories MCS-EFX Master Cabling Section with Extended Fingers Velocity Vertical Cable Management CHATSWORTH PRODUCTS INC (CPI) PR9867V2-143930.eps CHATSWORTH PRODUCTS INC (CPI) PR29084V2-215261.eps Velocity Vertical Cable Management is an ecomonical vertical cable management solution with a unique snap-together design that reduces shipping size and cost. The The MCS-EFX Master Cabling Section with Extended Fingers is a large capacity vertical components can be quickly assembled and then bolted to a CPI rack or QuadraRack. cable management solution for two-post and four-post racks. The MCS-EFX is Ships unassembled with patented cable guide fingers at 1U intervals. available as a single-sided or double-sided cable management trough in several sizes. FEATURES The MCS-EFX is manufactured from a combination of strong, lightweight aluminum • 1U high finger openings for patch cords along both sides of the trough, similar sheet and plenum-rated composite materials for maximum strength at minimal to MCS and CCS weight. The MCS-EFX is packaged in a single carton for easy handling and includes • Snap-on cover similar to Universal Horizontal Cable Manager installation hardware. • All cable openings are edge-protected • Single-sided and double-sided models in various widths and heights FEATURES • Includes assembly and installation hardware • Cable openings on the side of the MCS-EFX are sized to accommodate 48 patch cords, twice the capacity of the standard MCS. Openings have rounded edges to SINGLE-SIDED, FOR 7 FT. H (45U) RACKS protect cable and will not deform or break Anixter No. Vendor No. Description • Patented cable openings on the sides of the MCS-EFX align with RMU spaces on 420004 13901-703 80.5 in. H x 3.6 in. W x 9.7 in. D, black D the rack allowing cables to exit by RMU increments 415456 13902-703 80.5 in. H x 6.0 in. W x 9.8 in. D, black • The door hinges open to the right or left for easy access to cables during moves, 415457 13904-703 80.5 in. H x 10 in. W x 10.3 in. D, black adds or changes, and locks in the closed position to protect cables 420013 13905-703 80.5 in. H x 12 in. W x 10.4 in. D, black from damage • MCS-EFX also available in 7.5 ft. and 8 ft. H DOUBLE-SIDED, FOR 7 FT. H (45U) RACKS Anixter No. Vendor No. Description SINGLE-SIDED 420016 13911-703 80.5 in. H x 3.6 in. W x 16.4 in. D, black Anixter No. Vendor No. Description 415458 13912-703 80.5 in. H x 6.0 in. W x 16.6 in. D, black 284596 40092-703 7 ft. H x 6 in. W x 10.62 in. D, black 415459 13914-703 80.5 in. H x 10 in. W x 17.5 in. D, black 284597 40093-703 7 ft. H x 10 in. W x 10.62 in. D, black 420025 13915-703 80.5 in. H x 12 in. W x 17.8 in. D, black 284598 40094-703 7 ft. H x 12 in. W x 10.62 in. D, black Cable Management;Vertical/3818 Index1.Support and Supplies//Physical Support Structure//Accessories DOUBLE-SIDED CCS Combination Cabling Section Anixter No. Vendor No. Description 284599 40095-703 7 ft. H x 6 in. W x 21.23 in. D, black CHATSWORTH PRODUCTS INC (CPI) PR6806V2-143890.eps 284600 40096-703 7 ft. H x 10 in. W x 21.23 in. D, black 284601 40097-703 7 ft. H x 12 in. W x 21.23 in. D, black Combination front- and rear-facing (double-sided) vertical cable trough for use with the Universal, Standard, and 6 in. deep Standard Racks and QuadraRacks. Use with racks that support patch panels when customers want patch cords to be hidden from view. Request the latest literature and guides from Anixter. 4.18 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) FEATURES • CCS-EFX also available in 7.5 ft. and 8 ft. H • Front-facing trough has 1U high openings on both sides for organizing Anixter No. Vendor No. Description patch cords 284604 40098-703 7 ft. H x 6 in. W x 14.94 in. D, black • Front-facing trough has an integrated latch-closure door/cover that swings open 284605 40099-703 7 ft. H x 10 in. W x 14.94 in. D, black to the right or left and may be removed 284606 40100-703 7 ft. H x 12 in. W x 14.94 in. D, black • Rear-facing trough is completely open with spin-latch closures at 12 in. Cable Management;Vertical/17877 Index1.Support and Supplies//Physical Support Structure//Cabinets vertical intervals • All cable openings front and rear are edge-protected Vertical Cable Managers for F-Series TeraFrame Cabinet System • Available in three widths, match with style and height of supporting rack CHATSWORTH PRODUCTS INC (CPI) PR34417V2-254410.eps • Includes installation hardware, finish is black CCS COMBINATION CABLING SECTION FOR USE WITH UNIVERSAL OR STANDARD RACK Anixter No. Vendor No. Description 249545 30161-703 7 ft. H x 3.65 in. W x 12.24 in. D, black 249547 30162-703 7 ft. H x 6 in. W x 12.24 in. D, black 249549 30163-703 7 ft. H x 10 in. W x 12.24 in. D, black CCS COMBINATION CABLING SECTION FOR USE WITH 6 IN. DEEP STANDARD RACK Anixter No. Vendor No. Description Vertical Cable Managers for CPI's F-Series TeraFrame Cabinet System creates an 249550 30164-703 7 ft. H x 3.65 in. W x 14.61 in. D, black internal pathway that guides and protects network and signal cables and organizes 249551 30165-703 7 ft. H x 6 in. W x 14.61 in. D, black patch and equipiment cords as they enter and exit the manager to make 249552 30166-703 7 ft. H x 10 in. W x 14.61 in. D, black equipment connections. Cable Management;Vertical/11494 Index1.Support and Supplies//Physical Support Structure//Accessories FEATURES CCS-EFX Combination Cabling Section With Extended Fingers • Plastic T-shaped cable guides (fingers) organize cables by rack-mount space • Two sizes with standard and extended fingers for different cable capacities; CHATSWORTH PRODUCTS INC (CPI) PR9868V2-143931.eps match to cabinet width and height • Managers attach to the side of the equipment mounting rail or with the Slide Adapter Kit, ordered separately, directly to the cabinet frame • Edge-protected cable pass-through ports allow cables to exit the rear side of the manager, behind the equipment mounting rails • Managers include a snap-on cover to protect cables • Front-to-Back cable managers are available, order separately • Available in black finish only VERTICAL CABLE MANAGERS WITH STANDARD FINGERS Anixter No. Vendor No. Description The CCS-EFX Combination Cabling Section with Extended Fingers is a double-sided 366376 34421-C01 For 45U x 23.6 in. W cabinet, 1.9 in. W x vertical cable management trough designed for use with CPI's Universal and Standard 10.5 in. D, black Racks to manage cable at the cross-connect, especially when using angled-face 436521 35090-C05 For 45U x 27.6 in. W cabinet, 3.1 in. W x copper patch panels. 11.6 in. D, black The CCS-EFX is manufactured from a combination of strong, lightweight aluminum 444314 35095-C05 For 45U x 31.5 in. W cabinet, 5.0 in. W x sheet and plenum-rated composite materials for maximum strength at minimal 11.6 in. D, black weight. The CCS-EFX is packaged in a single carton for easy handling and includes installation hardware. VERTICAL CABLE MANAGERS WITH EXTENDED FINGERS FEATURES Anixter No. Vendor No. Description • Cable openings on the front of the CCS-EFX are sized to accommodate 48 patch 444317 35102-C05 For 45U x 27.6 in. W cabinet, 3.1 in. W x cords, twice the capacity of the standard CCS. Openings have rounded edges to 14.1 in. D, black protect cable and will not deform or break 444318 35103-C05 For 45U x 31.5 in. W cabinet, 5.0 in. W x • Cable openings on the front of the CCS-EFX align with rack-mount spaces on the 14.1 in. D, black rack allowing cables to exit in U increments SLIDE ADAPTER KIT • The front door hinges open to the right or left for easy access to cables during Anixter No. Vendor No. Description moves, adds and changes (MACs) and locks in the closed position to protect cables from damage 408183 35092-C01 For 27.6 in. W cabinets, black • Open rear of the CCS-EFX allows large premise cable bundles to exit the manager 444319 35092-C02 For 31.5 in. W cabinets, black into the rack-mount space. Spin closure latches secure cables Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.19 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Cable Management;Horizontal/17536 Index1.Support and Supplies//Physical Support Structure//Accessories (continued) Vertical Cable Managers for F-Series TeraFrame Velocity Horizontal Cable Management Cabinet System CHATSWORTH PRODUCTS INC (CPI) PR29085V2-215252.eps FRONT-TO-BACK CABLE MANAGERS Anixter No. Vendor No. Description 444320 35106-C01 For 27.6 in. W cabinets, use with rails spaced 26 in. to 33 in. apart, black 444321 35106-C02 For 27.6 in. W cabinets, use with rails spaced 22 in. to 26 in. apart, black 444322 35108-C01 For 31.5 in. W cabinets, use with rails spaced 26 in. to 33 in. apart, black 444323 35108-C02 For 31.5 in. W cabinets, use with rails spaced 22 in. to 26 in. apart, black Provides a rack-mounted horizontal pathway for patch cords. Use with CPI's Velocity Cable Management;Horizontal/15566 Index1.Support and Supplies//Physical Support Structure//Accessories Vertical Cable Management above and below patch panels and network switches. CPI Evolution Horizontal Cable Management recommends 1U of cable management for every 2U of connectivity. CHATSWORTH PRODUCTS INC (CPI) PR23429V2-164874.eps FEATURES • Snap-on cover, pivots open up or down • Pass cables front-to-rear through openings in rear of panel • T-shaped fingers organize patch cords entering/exiting rack-mount equipment • Made of plastic, all cable openings are edge-protected • Includes installation hardware Anixter No. Vendor No. Description 420027 13930-701 1U x 19 in. W x 5.9 in. D, black 415483 13930-702 2U x 19 in. W x 5.9 in. D, black 420029 13930-703 3U x 19 in. W x 5.9 in. D, black D CPI Evolution Horizontal Cable Management provides a solution for managing Cable Management;Horizontal/3817 Index1.Support and Supplies//Physical Support Structure//Accessories high-density cabling applications on open two-post and four-post CPI rack systems, Universal Horizontal Cable Manager delivering increased performance to match the demands of data center applications. Featuring easy-to-use doors with styling that complements the CPI TeraFrame family CHATSWORTH PRODUCTS INC (CPI) PR6821V2-143900.eps of cabinets, Evolution Cable Management provides innovative interior features to help maximize the capacity and utility of vertical and horizontal cable management. Evolution Horizontal Cable Managers are ideal for use above and below patch panels and network switches to organize and store cables. The included plastic T-shaped cable guides help to organize patch cords and jumper cords as they enter and exit the horizontal manager to make individual equipment connections. OPTIONS -Choose from three heights to match your cabling density -Use with any CPI two-post or four-post rack system FEATURES Provides a rack-mounted horizontal pathway for patch cords. Use above patch panels and network switches. CPI recommends 1U of cable management for every 2U of • Horizontal manager for use above and below patch panels and network switches connectivity. The Universal Horizontal Cable Manager complements CPI's CCS • Superior strength T-shaped cable guides for cable routing and control Combination Cabling Section and MCS Master Cabling Section. • Rounded edge cable guides protect cables from cuts and scrapes • Contoured front door with snap-on hinges FEATURES • Front door swings up or down and stays in the open position while cabling • Snap-on cover, pivots open up or down • Available in 1U, 2U and 3U configurations for 19 in. EIA-310-E compliant racks • Pass cables front-to-rear through opening in rear of panel or cabinets • T-shaped fingers organize patch cords entering/exiting rack-mount equipment Anixter No. Vendor No. Description • Use 6.5 in. D panels when double-sided MCS are attached to Standard or 375569 35441-701 1U x 19 in. W x 8.2 in. D, black Universal Racks 368558 35441-702 2U x 19 in. W x 8.2 in. D, black 375570 35441-703 3U x 19 in. W x 8.2 in. D, black Request the latest literature and guides from Anixter. 4.20 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Cable Management;Horizontal/2517 SINGLE-SIDED Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description 19 in. Horizontal Wire Management Panels 256551 30139-719 Universal Horizontal Cable Manager, 1U x CHATSWORTH PRODUCTS INC (CPI) pr5220V2-143873.eps 19 in. W x 5.2 in. D, black 247659 30130-719 Universal Horizontal Cable Manager, 2U x 19 in. W x 5.2 in. D, black 247661 30131-719 Universal Horizontal Cable Manager, 3U x 19 in. W x 5.2 in. D, black 267509 30139-723 Universal Horizontal Cable Manager, 1U x 23 in. W x 5.2 in. D, black 247660 30130-723 Universal Horizontal Cable Manager, 2U x 23 in. W x 5.2 in. D, black 247662 30131-723 Universal Horizontal Cable Manager, 3U x 19 in. Horizontal Wire Management Panels for use on CPI racks or QuadraRacks when 23 in. W x 5.2 in. D, black equipped with the VCS Vertical Cabling Section or for use within any CPI Cabinet 267511 30339-719 Universal Horizontal Cable Manager, 1U x System. CPI recommends planning 1U of cable management for every 2U 19 in. W x 6.5 in. D, black of connectivity. 247664 30330-719 Universal Horizontal Cable Manager, 2U x 19 in. W x 6.5 in. D, black FEATURES 247667 30331-719 Universal Horizontal Cable Manager, 3U x • 19 in. W x 4 in. D panels 19 in. W x 6.5 in. D, black • 1.5 in. D standoff from rack 267512 30339-723 Universal Horizontal Cable Manager, 1U x • 1U panel, rings are 1.5 in. H x 2.5 in. D 23 in. W x 6.5 in. D, black • 2U panel, rings are 3.25 in. H x 2.5 in. D • Includes mounting hardware and cable distribution spools 247665 30330-723 Universal Horizontal Cable Manager, 2U x • Other colors available 23 in. W x 6.5 in. D, black 247666 30331-723 Universal Horizontal Cable Manager, 3U x Anixter No. Vendor No. Description 23 in. W x 6.5 in. D, black 174172 13070-719 1U x 19 in. W x 4 in. D, black 174173 13075-719 2U x 19 in. W x 4 in. D, black DOUBLE-SIDED (ALSO AVAILABLE IN 23 IN.) Cable Management;Horizontal/2519 Anixter No. Vendor No. Description Index1.Support and Supplies//Physical Support Structure//Accessories 271867 30529-719 Universal Horizontal Cable Manager, 1U x Large Horizontal Ring Panels 19 in. W x 11.73 in. D, black CHATSWORTH PRODUCTS INC (CPI) pr5219V2-143872.eps 271868 30530-719 Universal Horizontal Cable Manager, 2U x 19 in. W x 11.73 in. D, black 271869 30531-719 Universal Horizontal Cable Manager, 3U x 19 in. W x 11.73 in. D, black Use above large network switches with vertical module cards when power supplies are at the base of the switch chassis. FEATURES • 2U panel, 2.8 in. H x 6 in. D-Rings • Other colors available Anixter No. Vendor No. Description 158553 11564-519 2U x 19 in. W x 6 in. D, clear 183717 11564-719 2U x 19 in. W x 6 in. D, black 184190 11564-723 2U x 23 in. W x 6 in. D, black Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.21 Racks, Cabinets and Cable Management Chatsworth Products, Inc. (CPI) Cable Management;Horizontal/2516 Cable Management;Vertical/12244 Index1.Support and Supplies//Physical Support Structure//Raceway Index1.Support and Supplies//Physical Support Structure//Cabinets Jumper Trays Enhanced Cable Managers CHATSWORTH PRODUCTS INC (CPI) pr5203V2-143866.eps CHATSWORTH PRODUCTS INC (CPI) PR10994V2-17956.eps Provide strain relief for patch cord slack and for patch cords transitioning between Enhanced Vertical Cable Managers for CPI's MegaFrame Cabinet System allow cables adjacent racks. to be organized by rack-mount space, making it easier to trace individual cables during moves, adds and changes. Additionally, two Enhanced Vertical Managers can FEATURES be connected with Front-to-Back Managers (as shown) to create a complete pathway • Patch cords enter/exit trays over controlled radii for patch cords that connect network switches and computers within the same or • Upper jumper trays are open on top and cable enters from below adjacent cabinets. • Lower jumper trays are closed on top and cable enters from above FEATURES • Installation hardware not included, use Part No. 128493 • Other sizes and colors available • Enhanced Vertical Managers are available in two sizes for large and extra-large cable capacities. The narrow version can be added to any MegaFrame Cabinet. UPPER JUMPER TRAYS The wide version is used in any 23 in. wide MegaFrame Cabinet that has been Anixter No. Vendor No. Description converted into a 19 in. rack solution with CPI's 23 in. to 19 in. Rail Adapter Kit 174148 12183-519 2U x 19 in. W x 3.5 in. D, clear (Part No. 10587). Both models include a snap-on door to protect cables. The 174150 12183-719 2U x 19 in. W x 3.5 in. D, black matching Front-to-Back Managers (sold in pairs) snap onto the vertical D 174153 12183-723 2U x 23 in. W x 3.5 in. D, black managers and adjust to match the depth of the cable managers • Cable openings in the Enhanced Vertical Manager allow cables to exit by U. 283579 13183-719 2U x 19 in. W x 6 in. D, black Openings have rounded edges to protect cable and will not deform or break LOWER JUMPER TRAYS • The back side of the Enhanced Vertical Manager has four edge-protected cable Anixter No. Vendor No. Description pass-through ports for front-to-back cabling 174159 12185-719 2U x 19 in. W x 3.5 in. D, black • Cover snaps on and opens to the right or left 174165 12187-719 3U x 19 in. W x 3.5 in. D, black • Front-to-Back Managers adjust in depth to connect the front and rear Enhanced Vertical Manager 249524 12185-723 2U x 23 in. W x 3.5 in. D, black • Available in black finish only 249525 12187-723 3U x 23 in. W x 3.5 in. D, black Cable Management;Horizontal/2514 NARROW ENHANCED VERTICAL CABLE MANAGERS Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description Patch Panel Wire Management Bar 313461 13171-702 6 ft. H x 3.50 in. W x 5.23 in. D CHATSWORTH PRODUCTS INC (CPI) pr5221V2-143874.eps 313452 13171-701 6 ft. 6 in. H x 3.50 in. W x 5.23 in. D 313454 13171-700 7 ft. H x 3.50 in. W x 5.23 in. D WIDE ENHANCED VERTICAL CABLE MANAGERS Anixter No. Vendor No. Description 313456 13170-702 6 ft. H x 4.75 in. W x 8.77 in. D 313459 13170-701 6 ft. 6 in. H x 4.75 in. W x 8.77 in. D 268426 13170-700 7 ft. H x 4.75 in. W x 8.77 in. D Provides a rack-mounted support for cables in-between CPI Cabling Sections and the rear of patch panels. Anixter No. Vendor No. Description 219941 12176-501 Clear 174174 12176-701 Black Request the latest literature and guides from Anixter. 4.22 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management APC ./Cabinets;Free-standing, Network and Server/3847 Index1.Support and Supplies//Physical Support Structure//Cabinets Anixter No. Vendor No. Description NetShelter SX Enclosures 425087 AR3140 NetShelter SX Networking 42U 30 in. W x 42 in. D, color: black APC BY SCHNEIDER ELECTRIC PR34473V2-255201.eps 324348 AR3150 NetShelter SX 42U 30 in. W x 42 in. D, color: black 443183 AR3155 NetShelter SX 45U 30 in. W x 42 in. D, color: black 325939 AR3157 NetShelter SX 48U 30 in. W x 42 in. D, color: black 353152 AR3300 NetShelter SX 42U 24 in. W x 47.5 in. D, color: black 443198 AR3305 NetShelter SX 45U 24 in. W x 47.5 in. D, color: black 353153 AR3307 NetShelter SX 48U 24 in. W x 47.5 in. D, color: black 435379 AR3340 NetShelter SX Networking 42U 30 in. W x 47.5 in. D, color: black 435381 AR3347 NetShelter SX Networking 48U 30 in W x 47.5 in D, color: black The APC NetShelter SX is an integral part of APC's InfraStruxure solution. Designed 353154 AR3350 NetShelter SX 42U 30 in. W x 47.5 in. D, color: black specifically for IT and data center applications, the NetShelter SX is ideal for 443199 AR3355 NetShelter SX 45U 30 in W x 47.5 in D, color: black high-density data centers when the delivery of a high amount of power and cable 370676 AR3357 NetShelter SX 48U 30 in. W x 47.5 in. D, color: black management options to servers and networking equipment is required. The 374028 AR3104 NetShelter SX 24U 24 in. W x 42 in. D, color: black enclosures provide a complete IT support system that seamlessly integrates with 443246 AR3200 NetShelter SX Colocation 2 x 20U 24 in. W x 42 in. D, APC's cooling, rack power distribution and cable management products. color: black FEATURES 443247 AR3810 NetShelter AV 42U 24 in. W x 32.5 in. D, • Several combinations of width, height, and depth make it easy to select the right 10-32 threaded rails color: black cabinet for high-density server applications and networking environments 443248 AR3812 NetShelter AV 42U 24 in. W x 32.5 in. D, • Vendor-neutral mounting for guaranteed compatibility with all 10-32 threaded rails, no sides/roof/doors EIA-310 compliant 19 in. equipment color: black • A proven frame design, heavy-gauge mounting rails and heavy-duty casters 443249 AR3814 NetShelter AV 24U 24 in. W x 32.5 in. D, provide for 3,000 lb. (1,364 kg) static and 2,250 lb. (1,023 kg) dynamic 10-32 threaded rails color: black load ratings Cabinets;Accessories/17903 • Rear channel provides integrated tool-less mounting of APC Rack Power Index1.Support and Supplies//Physical Support Structure//Cabinets Distribution Units and vertical cable managers Power and Cooling Solutions for APC Racks and Cabinets • The vertical mounting rails can be adjusted in 1/4 in. increments from a APC BY SCHNEIDER ELECTRIC PR33669V2-248515.eps maximum depth of 31 in. to a minimum depth of 15 in., covering virtually any mounting requirement for IT equipment • Large cable access slots in the roof provides 150 sq. in. (982 sq. cm) of access for overhead cable egress and the open-bottom design allows for unobstructed cable access through raised floor • Perforated front and rear doors provide ample ventilation for servers and networking equipment. Front door can be moved to opposite side or interchanged with rear doors APC offers a large variety of power and thermal management products to complete • Doors are easily removed with simple lift-off design your rack or cabinet system. Please see the Power, Cooling and Environmental • Half-height quick-release side panels reduce size and weight for easy handling Monitoring section for more information. and access to equipment • Side panels are lockable utilizing a single key with the doors • Split rear doors improve access and serviceability to rear of rack-mounted equipment • Enclosures are shipped standard with both leveling feet and casters • Overhead cable troughs and data cable partitions install tool-lessly on the roof of the enclosure, eliminating the need for ceiling-mounted or under floor-mounted cable trays • The roof, side panels, front and rear doors are grounded to the frame of the enclosure Anixter No. Vendor No. Description 324347 AR3100 NetShelter SX 42U 24 in. W x 42 in. D, color: black 443182 AR3105 NetShelter SX 45U 24 in. W x 42 in. D, color: black 324398 AR3107 NetShelter SX 48U 24 in. W x 42 in. D, color: black Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.23 Racks, Cabinets and Cable Management APC Cabinets;Wall-mount/17491 Index1.Support and Supplies//Physical Support Structure//Cabinets • Integrated power distribution with a rack power distribution unit provided, servers and other equipment are ready for deployment NetShelter WX Enclosures • Integrated heat removal with high-efficiency fan modules remove heat and APC BY SCHNEIDER ELECTRIC PR33673V2-248522.eps eliminate the need to purchase a costly cooling unit for your IT equipment Anixter No. Vendor No. Description 425092 AR4018 NetShelter CX, 18U, 30 in. W x 44.5 in. D, oak/grey finish 425094 AR4024 NetShelter CX, 24U, 30 in. W x 44.5 in. D, oak/grey finish 425097 AR4038 NetShelter CX, 38U, 30 in. W x 44.5 in. D, oak/grey finish Racks;Two-post/14638 Index1.Support and Supplies//Physical Support Structure//Racks NetShelter 2-Post Open Frame Rack Support remote patching and networking applications in a convenient wall-mount rack with an easy install rear-hinged section and reversible doors. APC BY SCHNEIDER ELECTRIC PR20805V2-98538.eps Anixter No. Vendor No. Description 312934 AR100 NetShelter WX, 13U, with threaded hole vertical mounting rail, glass front door, black 312935 AR100HD NetShelter WX, 13U, with threaded hole vertical mounting rail, vented front door, black 316608 AR8206ABLK Roof Fan Tray for NetShelter WX Enclosure Cabinets;Free-standing, Network and Server/17494 Index1.Support and Supplies//Physical Support Structure//Cabinets The NetShelter 2-Post Open Frame Rack offers a quality solution for the economical NetShelter CX Office Enclosures D installation of rack-mountable networking equipment. The NetShelter 2-Post Open APC BY SCHNEIDER ELECTRIC PR29144V2-215379.eps Frame Rack offers cost-conscious customers a simple solution for rack mounting network equipment in a secure managed environment including data centers, wiring closets and colocation facilities. FEATURES • Made with high-grade aluminum extrusions • 45U (78.75 in. or 200 cm) of equipment mounting space in a 7 ft. high design • Self-squaring design makes assembly quick and easy Anixter No. Vendor No. Description 353150 AR201 NetShelter 2-Post Open Frame Rack, 45U, #12-24 threaded holes, color: black Conveniently support servers and networking equipment in a cool, quiet, secure and Racks;Four-post/14640 Index1.Support and Supplies//Physical Support Structure//Racks attractive cabinet. The NetShelter CX Office Enclosures deliver an appealing and NetShelter 4-Post Open Frame Racks cost-effective alternative to building out a new computer room or deploying a loud metal enclosure in the open office. APC BY SCHNEIDER ELECTRIC PR29205V2-216080.eps FEATURES • Lockable front doors protect IT equipment from unwanted access • Light oak veneer finish blends the enclosure discretely into almost any office environment • Acoustic foam lining provides noise dampening of installed IT equipment allowing the enclosure to be placed in a quiet environment • Six vertical 0U accessory channels provide multiple mounting locations for cable management accessories and rack PDUs without using critical equipment space The NetShelter 4-Post Open Frame Rack provides simple, low-cost mounting means for rack-mount equipment in IT environments. Ideal for rack-mount servers, networking and telecom equipment where security at the individual rack level is not required, open frame racks provide unobstructed airflow and fast, easy access to installed equipment. Request the latest literature and guides from Anixter. 4.24 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management APC FEATURES HORIZONTAL CABLE MANAGERS • New design for easier assembly Anixter No. Vendor No. Description • Steel construction 374037 AR8602 Horizontal cable manager, 1U single-sided • 44U mounting spaces (84 in. tall) with cover - finger type • Black finish 374038 AR8600 Horizontal cable manager, 2U single-sided • Multiple tool-less mounting points for hook-and-loop fasteners (AR8621) with cover - finger type • Multi-position rack PDU mounting bracket 374039 AR8601 Horizontal cable manager, 2U • Reversible stabilization plates double-sided with cover - finger type • Grounding inserts 425173 AR8603 Horizontal cable manager, 2U x 6 in. deep • Weight capacity (static load) 2,000 lb. (909 kg) single-sided with cover - finger type Anixter No. Vendor No. Description 350020 AR8425A Horizontal cable organizer, 1U 407843 AR203A NetShelter 4-Post Open Frame Rack, 350016 AR8426A Horizontal cable organizer, 2U square holes, color: black 350019 AR8428 Horizontal cable organizer, 2U, with 414514 AR204A NetShelter 4-Post Open Frame Rack, pass-through holes threaded holes, color: black 325042 AR8429 Horizontal cable organizer, 1U, with Cabinets;Accessories/17501 brush strip Index1.Support and Supplies//Physical Support Structure//Accessories 353166 AR8008BLK Horizontal cable organizer side channel, NetShelter Cable Management, Support and Mounting Hardware 18 to 30 in. adjustment APC BY SCHNEIDER ELECTRIC PR34474V2-255194.eps 353167 AR8016ABLK Horizontal cable organizer side channel, 10 to 18 in. adjustment DATA CABLE PARTITIONS Anixter No. Vendor No. Description 353173 AR8162ABLK Data cable partition, NetShelter, 24 in. W 353174 AR8163ABLK Data cable partition, NetShelter, 24 in. W, pass-through 353179 AR8172BLK Data cable partition, NetShelter, 30 in. W 353180 AR8173BLK Data cable partition, NetShelter, 30 in. W, VERTICAL CABLE ORGANIZERS pass-through Anixter No. Vendor No. Description 348564 AR7502 Replacement vertical 0U accessory POWER CABLE TROUGHS channel for supporting rack PDUs and Anixter No. Vendor No. Description vertical cable organizers, NetShelter SX 425165 AR8561 Cable trough for 24 in. wide enclosures 307540 AR8442 Vertical cable organizer, side rear-mount, 425169 AR8571 Cable trough for 30 in. wide enclosures zero U (qty. two) MOUNTING RAILS 374029 AR8443A Vertical fiber organizer 374030 AR7711 NetShelter SX zero U Accessory Mounting Anixter No. Vendor No. Description Bracket for 1U and 2U patching 353156 AR7503 42U 24 in. W recessed rail kit 374031 AR7580 Vertical Cable Organizer for use with 353157 AR7504 48U 24 in. W recessed rail kit NetShelter SX 750 mm (AR3150 and 353159 AR7508 42U 30 in. W recessed rail kit AR3350) wide Enclosures – finger type 353160 AR7578 48U 30 in. W recessed rail kit 374035 AR7581 Hinged covers for NetShelter SX 750 mm 429697 AR7510 42U 23 in. EIA mounting rails, square wide vertical cable manager holes (qty. four) 374036 AR7582 Cable retainer for NetShelter SX 750 mm 353165 AR8006A Equipment support rails for 24 in. wide vertical cable manager wide enclosure 370677 AR7710 Cable containment brackets with 443679 AR8150BLK Adapter kit 23 in. to 19 in. mounting PDU mounting GROUNDING BUSBAR 353164 AR7707 Cable management rings, 8 in. D, 750 mm Anixter No. Vendor No. Description wide cabinet, NetShelter SX (qty. eight) 443677 AR8395 20U tool-less copper busbar kit for 425182 AR7717 Additional Vertical Cable Manager Fingers NetShelter SX Enclosures for NetShelter SX Networking Enclosure Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.25 Racks, Cabinets and Cable Management APC RACK LCD CONSOLES (continued) NetShelter Cable Management, Support and Anixter No. Vendor No. Description Mounting Hardware 425211 AP5808 17 in. Rack LCD Console with integrated BOLT-DOWN BRACKET 8-port analog KVM switch Anixter No. Vendor No. Description 425212 AP5816 17 in. Rack LCD Console with integrated 353162 AR7701 Bolt-down brackets for NetShelter 16-port analog KVM switch SX enclosures 425213 AP5717 17 in. Rack LCD Console 353161 AR7700 Stabilizer plate 24/30 in. 425214 AP5719 19 in. Rack LCD Console Cable Management;Vertical and Horizontal/17521 MOUNTING SHELVES Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description Open Frame Rack Cable Management 256505 AR8105BLK Fixed shelf 50 lb./22.7 kg black APC BY SCHNEIDER ELECTRIC PR29178V2-215414.eps 252710 AR8122BLK Fixed shelf 250 lb./114 kg black 256507 AR8123BLK Sliding shelf 100 lb./45.5 kg black 418494 AR8128BLK Sliding shelf 200 lb./91 kg black 425197 AR8422 Double-sided fixed shelf for NetShelter 2-Post Open Frame Rack 250 lb. black 443682 AR8125 Adjustable shelf 250 lb. 16 in. - 24 in. deep black NETSHELTER SX RACK SECURITY DEVICES Anixter No. Vendor No. Description 324907 AP9513 Door switch kit FEATURES 353171 AR8132A Combination lock handles (qty. two) • Fits two- and four-post open frame racks 353148 AP9361 APC NetBotz Rack Access PX - HID • Double-sided cable channels 373087 NBES0302 NetBotz door switch sensor for rooms or • Dual-hinge, snap-on covers D third-party racks - 50 ft. • Smooth radius fingers at 1U increments for superior cable protection 373099 NBES0303 NetBotz Door Switch Sensor (two) for an • Tool-less mounting provided on back panel for new fiber spools (AR8444) and APC rack - 12 ft. hook-and-loop fasteners (AR8621) 443064 NBPD0171 Integrated Rack Access for APC • Cable capacity: NetShelter SX -AR8650 (front) - 370 Cat 6, 270 Cat 6A -AR8650 (rear) - 510 Cat 6, 380 Cat 6A NETSHELTER SX AIRFLOW MANAGEMENT BLANKING PANELS AND KOLDLOK RAISED -AR8651 (front) - 740 Cat 6, 550 Cat 6A FLOOR GROMMETS -AR8651 (rear) - 1030 Cat 6, 760 Cat 6A Anixter No. Vendor No. Description Anixter No. Vendor No. Description 332646 AR8136BLK 1U 19 in. modular tool-less airflow 425235 AR8650 Vertical cable management for two- and management blanking panel (qty. 10) four-post racks, with cover 6 in. W 324759 AR8136BLK200 1U 19 in. modular tool-less airflow 425236 AR8651 Vertical cable management for two- and management blanking panel (qty. 200) four-post racks, with cover 12 in. W 266864 AR8101BLK Airflow management blanking panel kit 426313 AR8652 Spacer and rack PDU bracket for four-post (1U, 2U, 4U, 8U) racks, 6 in. wide (qty. two) 353168 AR8108BLK 1U airflow management blanking panel kit 443684 AR8621 Tool-less hook and loop cable managers (qty. two) (qty. 10) 370683 AR7720 KoldLok integral raised-floor grommet 381724 AR8444 Tool-less fiber spools (qty. four) (qty. 10) 374145 AR7730 KoldLok surface-mount raised-floor grommet (qty. 10) 374146 AR7740 KoldLok extended raised-floor grommet (qty. 10) Request the latest literature and guides from Anixter. 4.26 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Belden ./Cabinets;Free-standing, Server/14536 Index1.Support and Supplies//Physical Support Structure//Cabinets REAR DOOR Ultra Deep Server Anixter No. Vendor No. Description 349979 8424-DSSR-3 Split (French style) perforated rear door BELDEN PR19986V2-62803.eps with 63% opening and swing handle latch and lock, black 349982 8424-DSPR-3 Rigid perforated rear door with 63% opening and swing handle latch and lock, black 349984 8424-DSVR-3 Tempered glass vented rear door with swing handle latch and lock, black SIDE PANELS Anixter No. Vendor No. Description 349985 8436-01-SP-3 One lift-off solid side panel with The Ultra Deep Server (XUSD) is the most popular and flexible of Belden's cabinet lock, black offerings. Combining multiple top and bottom entrance points in a 45U rack space 349988 8436-02-SP-3 Two solid side panels with locks, black makes configurations simple and saves space. This system offers multiple front and rear door options to create a professional look and is available in custom colors. TOPS/COOLING DEVICES SPECIFICATIONS Anixter No. Vendor No. Description 1. Dimensions: 24 in. W x 42 in. D x 84 in. H (45RU); 48 in. D version available 349994 9315-7200 19 in. fan tray (nine 4 in. fans = on request 720 cfm) 2. Three pair 19 in. (EIA-310) mounting rails (10-32, 12-24 or cage nut type rails) 349998 2430-TP-4-3 Top-mount fan 4 in. diameter (four 4 in. with mounting hardware fans = 320 cfm), black 3. Other Belden cabinet footprints and heights are available upon request 350002 2430-TP-3-3 Top-mount fan 10 in. diameter FEATURES (550 cfm), black • Reversible doors 350003 2430-TP-6-3 Perforated top, black • Lift-off side panels 350004 2430-TP-1-3 Solid top, black • Locking doors and side panels ACCESSORIES - SHELVES • Rubber gland access top to prevent dust Anixter No. Vendor No. Description • Adjustable 19 in. mounting uprights • Casters and levelers 337749 9910-0100 1U 19 in. solid filler panel, black • Optional antitip device 337750 9911-0200 2U 19 in. solid filler panel, black 337751 9912-0300 3U 19 in. solid filler panel, black ULTRA DEEP SERVER FRAME 337752 9913-0400 4U 19 in. solid filler panel, black Anixter No. Vendor No. Description 337747 9010-1924 19 in. heavy-duty adjustable shelf 349965 XUSD84-3-100000 84 in. H x 24 in. W x 42 in. D, 45U, black, (vented) four-point mounting 24 in. depth, frame only no doors, sides or top panel 150 lb. 377289 XUSD84-3-142320 84 in. H x 24 in. W x 42 in. D, 45U, black, 377522 9010-1930 19 in. heavy-duty adjustable shelf solid top panel, rigid perforated swing (vented) four-point mounting 30 in. depth, front door, perforated swing rear door, two 150 lb. solid side panels 377523 9010-1936 19 in. heavy-duty adjustable shelf 377518 XUSD84-3-142300 84 in. H x 24 in. W x 42 in. D, 45U, black, (vented) four-point mounting 36 in. depth, solid top panel, rigid perforated swing 150 lb. front door, perforated swing rear door 362137 9011-1918-16 19 in. flush-mount cantilevered shelf 377519 XUSD84-3-142720 84 in. H x 24 in. W x 42 in. D, 45U, black, (vented) 18 in. depth, 25 lb. solid top panel, rigid perforated swing 362142 9012-1918-16 19 in. flush-mount cantilevered shelf front door, solid with eight 4 in. fan rear (solid) 18 in. depth, 25 lb. door, two solid side panels 366547 9015-1909 19 in. retractable keyboard swivel shelf FRONT DOOR for maximum cabinet space efficiency Anixter No. Vendor No. Description HORIZONTAL MANAGER WITH COVER 349970 8424-DSPF-3 Rigid perforated front door with 63% Anixter No. Vendor No. Description opening and swing handle latch and 406687 BHH191UC Horizontal manager, 19 in. W x 1U, black lock, black 349298 BHH192UC Horizontal manager, 19 in. W x 2U, black 349973 8424-DSVF-3 Tempered glass vented front door with 349299 BHH193UC Horizontal manager, 19 in. W x 3U, black swing handle latch and lock, black Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.27 Racks, Cabinets and Cable Management Belden Racks;Two- and Four-post/15557 Index1.Support and Supplies//Physical Support Structure//Racks SINGLE-SIDED HIGH-DENSITY VERTICAL MANAGER High Density Racking System Anixter No. Vendor No. Description 349202 BHVH003 High-density with doors, 3 5/8 in. W x BELDEN PR34406V2-253248.eps 84 in. H, black 349203 BHVH006 High-density with doors, 6 in. W x 84 in. H, black 349204 BHVH010 High-density with doors, 10 in. W x 84 in. H, black 349206 BHVH012 High-density with doors, 12 in. W x 84 in. H, black SINGLE-SIDED LOW-DENSITY VERTICAL MANAGER Anixter No. Vendor No. Description 349209 BHVL003 Low-density without doors, 3 5/8 in. W x Belden's High Density Racking System (HDRS) allows for optimal density and ease of 84 in. H, black moves, adds and changes (MACs). Specifically designed for use in cross-connect and 349211 BHVL006 Low-density without doors, 6 in. W x switches/servers hosting applications. Belden's fully integrated family of networking 84 in. H, black products reliably deliver the bandwidth you need and help you make the best use of 349213 BHVL010 Low-density without doors, 10 in. W x valuable real estate. 84 in. H, black SPECIFICATIONS 349215 BHVL012 Low-density without doors, 12 in. W x 1. High level of modularity; combination of high- and low-density managers allows 84 in. H, black for configuration to your specific needs 2. 1RU spaced radius control fingers (on high-density managers) eliminate needs for DOUBLE-SIDED HIGH-DENSITY VERTICAL MANAGER horizontal managers. Patch cords can be routed directly to the vertical manager Anixter No. Vendor No. Description 3. Any-point-to-any-point routing capability, make MACs work easily and enables 349219 BHVHH03 High-density with doors, 3 5/8 in. W x configuration flexibility 84 in. H, black 4. Mixed media application, designed to handle both copper and fiber structured 349221 BHVHH06 High-density with doors, 6 in. W x D cable networks 84 in. H, black 5. Ease of install and great aesthetics 349222 BHVHH10 High-density with doors, 10 in. W x TWO-POST RELAY RACKS 84 in. H, black Anixter No. Vendor No. Description 349223 BHVHH12 High-density with doors, 12 in. W x 349199 BHRR194 Aluminum, 19 in. W x 84 in. H, 84 in. H, black #12-24 tapped hole, 3 in. HIGH-/LOW-DENSITY VERTICAL MANAGER channel, black Anixter No. Vendor No. Description 349200 BHRR234 Aluminum, 23 in. W x 84 in. H, 349227 BHVHL03 High-/low-density combination with front #12-24 tapped hole, 3 in. doors 3 5/8 in. W x 84 in. H, black channel, black 349229 BHVHL06 High-/low-density combination with front 377930 BHRR6194 Aluminum, 19 in. W x 84 in. H, doors 6 in. W x 84 in. H, black #12-24 tapped hole, 6 in. 349231 BHVHL10 High-/low-density combination with front channel, black doors 10 in. W x 84 in. H, black 377935 XDR8419-312 Steel, 19 in. W x 84 in. H, #12-24 tapped 349233 BHVHL12 High-/low-density combination with front hole, 3 in. channel with angle base, black doors 12 in. W x 84 in. H, black 377940 XDR8419-312W Welded steel, 19 in. W x 84 in. H, #12-24 tapped hole, 3 in. channel with VERTICAL MANAGER BACK COVER angle base, black Anixter No. Vendor No. Description FOUR-POST SERVER RACKS (STEEL) 349282 BHBC03X Back-cover, 3 5/8 in. W, black 349287 BHBC06X Back-cover, 6 in. W, black Anixter No. Vendor No. Description 349288 BHBC10X Back-cover, 10 in. W, black 377941 XDR8419-31224 Steel, 19 in. W x 84 in. H, #12-24 tapped hole, 3 in. channel, black, 24 in. depth 349289 BHBC12X Back-cover, 12 in. W, black 377942 XDR8419-31228 Steel, 19 in. W x 84 in. H, #12-24 tapped HORIZONTAL MANAGER WITH COVER hole, 3 in. channel, black, 28 in. depth Anixter No. Vendor No. Description 377944 XDR8419-31232 Steel, 19 in. W x 84 in. H, #12-24 tapped 349297 BHH191UR Horizontal manager, 19 in. W x 1U, black hole, 3 in. channel, black, 32 in. depth 405037 BHH192UR Horizontal manager, 19 in. W x 2U, black 377945 XDR8419-31236 Steel, 19 in. W x 84 in. H, #12-24 tapped 408378 BHH193UR Horizontal manager, 19 in. W x 3U, black hole, 3 in. channel, black, 36 in. depth Request the latest literature and guides from Anixter. 4.28 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Belden ACCESSORIES 18U MOUNTING 125 lb. load capacity Anixter No. Vendor No. Description Anixter No. Vendor No. Description 349304 BHTT196 Top transition channel, 19 in. W x 6 in. D, black 444562 XWM-3620-GD-3 36 in. H x 20 in. D, glass door with lock 349305 BHTL196 Lower transition channel, 19 in. W x 444535 XWM-3620-SD-3 36 in. H x 20 in. D, solid steel door 6 in. D, black with lock 349306 BHTD196 Lower transition channel double, 19 in. W 362133 XWM-3624-GD-3 36 in. H x 24 in. D, glass door with lock x 6 in. D, black 444560 XWM-3624-SD-3 36 in. H x 24 in. D, solid steel door 349345 BHSK020 Slack management spool kit, black with lock 349349 BHSP020 Slack management spools, two, black 25U MOUNTING 349358 BHFS11U Finger section, 11U, black 200 lb. load capacity 349364 BHPF100 Fastener for vertical manager (100) Anixter No. Vendor No. Description 349365 BHSM100 Tie mount for vertical manager (100) 444569 XWM-4820-GD-3 48 in. H x 20 in. D, glass door with lock Cabinets;Wall-mount/17885 Index1.Support and Supplies//Physical Support Structure//Cabinets 444572 XWM-4820-SD-3 48 in. H x 20 in. D, solid steel door with lock Wall Mount Enclosure 362132 XWM-4824-GD-3 48 in. H x 24 in. D, glass door with lock BELDEN PR34407V2-253251.eps 444573 XWM-4824-SD-3 48 in. H x 24 in. D, solid steel door with lock BACKBOARD MOUNTING Anixter No. Vendor No. Description 444534 XWM-2406-GD-3 24 in. H x 6 in. D, glass door with lock 364746 XWM-2406-SD-3 24 in. H x 6 in. D, solid steel door with lock 444561 XWM-3606-GD-3 36 in. H x 6 in. D, glass door with lock 419685 XWM-3606-SD-3 36 in. H x 6 in. D, solid steel door with lock Wall Mount Enclosures, with their great aesthetic, rugged construction and cable 444565 XWM-4806-GD-3 48 in. H x 6 in. D, glass door with lock management features, are perfectly suited for retail, office, telecom closets or any 444571 XWM-4806-SD-3 48 in. H x 6 in. D, solid steel door hosting applications where space utilization is critical. with lock SPECIFICATIONS 1. Available with either a glass door with lock, or a steel door with lock, and 1 pair of ACCESSORIES 10-32 tapped rails Anixter No. Vendor No. Description 2. Heights: 24 in., 36 in. and 48 in. 444578 XWM-2401 24 in. plywood backboard, black 3. Width: 21.25 in. 444579 XWM-3601 36 in. plywood backboard, black 4. Depths: 6 in., 20 in. and 24 in. 444580 XWM-4801 48 in. plywood backboard, black FEATURES 362135 XWM-9312-1600 Fan assembly, 2-4 in. diameter fans, • Sturdy welded steel construction 160 cfm with guard • Most units feature 19 in. mounting rails 444575 XWM-2419 19 in. mounting uprights, 10-32 tapped, • Direction of door swing is reversible in the field 24 in. • Top and bottom fan knockouts each accommodate two 4 in. fans 400038 XWM-3619 19 in. mounting uprights, 10-32 tapped, • Two laser-cut conduit knockouts 0.885 in. and 1.110 in. diameter 36 in. • Convenient laser-cut cable entry located on the top (3 x 3 in. dia.) and bottom 444576 XWM-4819 19 in. mounting uprights, 10-32 tapped, (3 x 3 in. dia.) rear section of the enclosure 48 in. 12U MOUNTING 362146 8911-0100 Mounting hardware, 10-32 tapped, 125 lb. load capacity mounting screws (50) 400039 9712-0103 Vertical cable ring, 1U cable manager, Anixter No. Vendor No. Description 1 in. W x 2 in. D 444533 XWM-2420-GD-3 24 in. H x 20 in. D, glass door with lock 362131 XWM-2420-SD-3 24 in. H x 20 in. D, solid steel door with lock 362130 XWM-2424-GD-3 24 in. H x 24 in. D, glass door with lock 444532 XWM-2424-SD-3 24 in. H x 24 in. D, solid steel door with lock Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.29 Racks, Cabinets and Cable Management CommScope Solutions ./Cabinets;Free-standing, Network/16496 Index1.Support and Supplies//Physical Support Structure//Cabinets physical impact on the network infrastructure and, ultimately, on the network's performance. Network Cabinets FEATURES COMMSCOPE PR24117V2-174780.eps • Supplied fully assembled • Load rated to 1,450 kg/3,200 lb. • Accommodates all major servers on the market • Cable management room is superior for 10 Gbps cable • Future-proofed; can accommodate 19 in. • Door vent pattern provides excellent thermal management • Split rear door • Application specific accessories • Two depth options: 1,000 mm and 1,200 mm • Two width options: 600 mm and 800 mm • Two height options: 42U and 47U More than "just a box," CommScope Network Cabinets are a solution. CommScope cabinets are designed to be the right size, the right weight and have the right level of 42U SERVER CABINETS durability to support the entire line of CommScope solutions, including its Doors: vented steel front, double vented steel rear industry-leading 10 Gbps solutions. Anixter No. Vendor No. Description Material ID FEATURES 426476 SC42U600X1000NS Server bay cabinet, 42U, 760143016 • Supplied fully assembled 600 mm x 1,000 mm • Cable management room is superior for 10 Gbps cable 426477 SC42U800X1000NS Server bay cabinet, 42U, 760143032 • Multiple cable entry 800 mm x 1,000 mm • Split rear door 426478 SC42U600X1200NS Server bay cabinet, 42U, 760143024 • Load rated to 1450 kg/3,200 lb. 600 mm x 1,200 mm • Future-proofed; can accommodate 19 in. 426479 SC42U800X1200NS Server bay cabinet, 42U, 760143040 • Accessories can be easily added or changed 800 mm x 1,200 mm • Depth options: 800 mm D • Width options: 600 mm or 800 mm with or without perforated doors 47U SERVER CABINETS Doors: vented steel front, double vented steel rear Anixter No. Vendor No. Description Material ID 426473 NC42U800X800NS Network bay cabinet, 42U, 760142927 Anixter No. Vendor No. Description Material ID 800 mm x 800 mm 426482 SC47U600X1000NS Server bay cabinet 47U 760143057 432794 NC 42U 600X800 NS PF Network Bay Cabinet 760149708 600 mm x 1,000 mm Perforated, 42U, 600 mm x 426483 SC47U800X1000NS Server bay cabinet, 47U, 760143073 800 mm 800 mm x 1,000 mm 432795 NC 42U 800X800 NS PF Network Bay Cabinet 760150664 426485 SC47U600X1200NS Server bay cabinet 47U 760143065 Perforated, 42U, 800 mm x 600 mm x 1,200 mm 800 mm 426486 SC47U800X1200NS Server bay cabinet, 47U, 760143081 800 mm x 1,200 mm Cabinets;Free-standing, Server/16497 Index1.Support and Supplies//Physical Support Structure//Cabinets SIDE PANELS Server Cabinets Anixter No. Vendor No. Description Material ID COMMSCOPE PR24118V2-174778.eps 426474 42U800MMSIDEPNL Side panel, 42U x 760143941 32 in./800 mm, qty. (2) 426480 42U1000MMSIDEPNL Side panel, 42U x 760143958 40 in./1,000 mm (2) 426481 42U1200MMSIDEPNL Side panel 42U x 760143966 48 in./1,200 mm (2) 426487 47U1000MMSIDEPNL Side panel 47U x 760143974 40 in./1,000 mm (2) 426488 47U1200MMSIDEPNL Side panel, 47U x 760143982 48 in./1,200 mm (2) CommScope Server Cabinets are the right cabinet to protect the right solution. CommScope Server Cabinets are designed to be the right size, the right weight and have the right level of durability to support the entire line of CommScope solutions, including its industry-leading 10 Gbps solutions. The right cabinet means less Request the latest literature and guides from Anixter. 4.30 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management CommScope Solutions CABLE MANAGEMENT AND ROUTING MISCELLANEOUS ACCESSORIES Anixter No. Vendor No. Description Material ID Anixter No. Vendor No. Description Material ID 432799 CCM 3.5IN X 9U Cabinet cable mgmt, 760144626 432810 BAY KIT Baying kit 760144063 3.5 in. W x 9U 432824 M6 GRND CAGE NUT 50 M6 caged nut with contact 760144097 432797 CCM 10IN X 9U Cabinet cable mgmt, 760144600 (50 pk) 10 in. W x 9U 432811 M6 CAGE NUT 50 M6 caged nut without 760144089 432802 CCM VLR Cabinet cable mgmt velcro 760144659 contact (50 pk) 432798 CCM 3 CVR Cabinet cable mgmt cover, 760144618 432844 M6 X 12MM TORX 300 Screw kit - M6 x 12 mm Torx 760144105 3.5 in. W (300 pk) 432796 CCM 10 COVER Cabinet cable mgmt cover, 760144592 432813 M6 X 16MM Screw kit - M6 x 760144113 10 in. W 16 mm Phillips 432800 CCM CLW Cabinet cable mgmt 760144634 432814 SC CTR KIT Server cabinet caster kit 760144030 cable claw 432809 ADJ LEV FEET Adjustable leveling feet 760144048 432801 CCM SPL Cabinet cable mgmt 760144642 432818 BOLTCLAMP Bolt down clamps (set 760144055 slack spool of four) 432819 GROUND KIT Complete grounding kit 760144071 Cabinets;Free-standing, Server/17849 Index1.Connecting Hardware//Cross-connect Systems//Copper/Fiber-Dual Applications InstaPATCH ZERO Preterminated Server Cabinet Solution COMMSCOPE SYSTIMAX PR34244V2-251941.eps The InstaPATCH ZERO server cabinet solution is comprised of a 600 mm wide server cabinet, factory configured cord cassettes with pre-managed slack loops, and a mini rack mounted above the cabinet. InstaPATCH ZERO provides U/UTP and fiber connectivity in an integrated, modular system that enables rapid, plug-and-play server cabinet deployment and facilities best practices in intra-cabinet cable management. Deployment of InstaPATCH ZERO is a two-step process. Simply roll in a pre-configured cabinet and plug the cord bundles into the overhead patch panel. Once the servers are installed in the cabinet, they can be connected instantly by pulling the patch cord out of the cassette to complete the patch. When your server needs change, InstaPATCH ZERO's preterminated modularity enables you to slide in additional cassettes, or quickly decommission and replace an entire cabinet. LEFT-MOUNT SERVER CABINET WITH CORD CASSETTES Built on a unique modular 600 mm wide server cabinet equipped with preterminated cord cassettes that require zero space in the vertical racks, InstaPATCH ZERO is a preterminated server cabinet solution optimized for rapid server deployment and change management. Each InstaPATCH ZERO cabinet can accept up to six InstaPATCH ZERO cord cassettes with built-in U/UTP and fiber patch cords. Cord cassettes are pre-installed and configured in the zero U space of a 42U 600 mm wide and 1,200 mm deep server cabinet before shipping to end user sites, which provide up to 72 U/UTP ports, or up to 72 U/UTP ports and 72 optical fiber duplex LC ports. Anixter No. Vendor No. Description Material ID 443725 PS42U600W1200D L2-A2110000 Two cord cassettes, A and B positions, Category 6A, light blue 760157917 443726 PS42U600W1200D L2-A2001100 Two cord cassettes, C and D positions, Category 6A, light blue 760157925 443727 PS42U600W1200D L4-A2111100 Four cord cassettes, A through D positions, Category 6A, light blue 760157933 443728 PS42U600W1200D L6-A2111111 Six cord cassettes, A through F positions, Category 6A, light blue 760157941 443729 PS42U600W1200D L2-A3110000 Two cord cassettes, A and B positions, Category 6A, dark gray 760158071 443730 PS42U600W1200D L2-A3001100 Two cord cassettes, C and D positions, Category 6A, dark gray 760158089 443731 PS42U600W1200D L4-A3111100 Four cord cassettes, A through D positions, Category 6A, dark gray 760158097 443732 PS42U600W1200D L6-A3111111 Six cord cassettes, A through F positions, Category 6A, dark gray 760158105 443733 PS42U600W1200D L2-B2110000 Two cord cassettes, A and B positions, Category 6, light blue 760158113 443734 PS42U600W1200D L2-B2001100 Two cord cassettes, C and D positions, Category 6, light blue 760158121 443735 PS42U600W1200D L4-B2111100 Four cord cassettes, A through D positions, Category 6, light blue 760158139 443736 PS42U600W1200D L6-B2111111 Six cord cassettes, A through F positions, Category 6, light blue 760158147 443737 PS42U600W1200D L2-B3110000 Two cord cassettes, A and B positions, Category 6, dark gray 760157958 443738 PS42U600W1200D L2-B3001100 Two cord cassettes, C and D positions, Category 6, dark gray 760157966 443739 PS42U600W1200D L4-B3111100 Four cord cassettes, A through D positions, Category 6, dark gray 760157974 443740 PS42U600W1200D L6-B3111111 Six cord cassettes, A through F positions, Category 6, dark gray 760157982 Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.31 Racks, Cabinets and Cable Management CommScope Solutions (continued) InstaPATCH ZERO Preterminated Server Cabinet Solution Anixter No. Vendor No. Description Material ID 443741 PS42U600W1200D L2-A2330000 Two cord cassettes, A and B positions, Category 6A, light blue, 24 OM4 fiber 760158238 443742 PS42U600W1200D L2-A2003300 Two cord cassettes, C and D positions, Category 6A, light blue, 24 OM4 fiber 760158246 443743 PS42U600W1200D L4-A2333300 Four cord cassettes, A through D positions, Category 6A, light blue, 24 OM4 fiber 760158253 443744 PS42U600W1200D L6-A2333333 Six cord cassettes, A through F positions, Category 6A, light blue, 24 OM4 fiber 760158261 443745 PS42U600W1200D L2-A3330000 Two cord cassettes, A and B positions, Category 6A, dark gray, 24 OM4 fiber 760158394 443746 PS42U600W1200D L2-A3003300 Two cord cassettes, C and D positions, Category 6A, dark gray, 24 OM4 fiber 760158402 443747 PS42U600W1200D L4-A3333300 Four cord cassettes, A through D positions, Category 6A, dark gray, 24 OM4 fiber 760158410 443748 PS42U600W1200D L6-A3333333 Six cord cassettes, A through F positions, Category 6A, dark gray, 24 OM4 fiber 760158428 443749 PS42U600W1200D L2-B2330000 Two cord cassettes, A and B positions, Category 6, light blue, 24 OM4 fiber 760158436 443750 PS42U600W1200D L2-B2003300 Two cord cassettes, C and D positions, Category 6, light blue, 24 OM4 fiber 760158444 443751 PS42U600W1200D L4-B2333300 Four cord cassettes, A through D positions, Category 6, light blue, 24 OM4 fiber 760158451 443752 PS42U600W1200D L6-B2333333 Six cord cassettes, A through F positions, Category 6, light blue, 24 OM4 fiber 760158469 443753 PS42U600W1200D L2-B3330000 Two cord cassettes, A and B positions, Category 6, dark gray, 24 OM4 fiber 760158279 443754 PS42U600W1200D L2-B3003300 Two cord cassettes, C and D positions, Category 6, dark gray, 24 OM4 fiber 760158287 443755 PS42U600W1200D L4-B3333300 Six cord cassettes, A through F positions, Category 6, dark gray, 24 OM4 fiber 760158295 443756 PS42U600W1200D L6-B3333333 Six cord cassettes, A through F postions, Category 6, dark gray, 24 OM4 fiber 760158303 RIGHT-MOUNT SERVER CABINET WITH CORD CASSETTES Anixter No. Vendor No. Description Material ID 443757 PS42U600W1200D R2-A2110000 Two cord cassettes, A and B positions, Category 6A, light blue 760157990 443758 PS42U600W1200D R2-A2001100 Two cord cassettes, C and D positions, Category 6A, light blue 760158006 443759 PS42U600W1200D R4-A2111100 Four cord cassettes, A through D positions, Category 6A, light blue 760158014 443760 PS42U600W1200D R6-A2111111 Six cord cassettes, A through F positions, Category 6A, light blue 760158022 D 443761 PS42U600W1200D R2-A3110000 Two cord cassettes, A and B positions, Category 6A, dark gray 760158154 443762 PS42U600W1200D R2-A3001100 Two cord cassettes, C and D positions, Category 6A, dark gray 760158162 443763 PS42U600W1200D R4-A3111100 Four cord cassettes, A through D positions, Category 6A, dark gray 760158170 443764 PS42U600W1200D R6-A3111111 Six cord cassettes, A through F positions, Category 6A, dark gray 760158188 443765 PS42U600W1200D R2-B2110000 Two cord cassettes, A and B positions, Category 6, light blue 760158196 443766 PS42U600W1200D R2-B2001100 Two cord cassettes, C and D positions, Category 6, light blue 760158204 443767 PS42U600W1200D R4-B2111100 Four cord cassettes, A through D postions, Category 6, light blue 760158212 443768 PS42U600W1200D R6-B2111111 Six cord cassettes, A through F positions, Category 6, light blue 760158220 443769 PS42U600W1200D R2-B3110000 Two cord cassettes, A and B positions, Category 6, dark gray 760158030 443770 PS42U600W1200D R2-B3001100 Two cord cassettes, C and D positions, Category 6, dark gray 760158048 443771 PS42U600W1200D R4-B3111100 Four cord cassettes, A through D positions, Category 6, dark gray 760158055 443772 PS42U600W1200D R6-B3111111 Six cord cassettes, A through F positions, Category 6, dark gray 760158063 443773 PS42U600W1200D R2-A2330000 Two cord cassettes, A and B positions, Category 6A, light blue, 24 OM4 fiber 760158311 443774 PS42U600W1200D R2-A2003300 Two cord cassettes, C and D positions, Category 6A, light blue, 24 OM4 fiber 760158329 443775 PS42U600W1200D R4-A2333300 Four cord cassettes, A through D positions, Category 6A, light blue, 24 OM4 fiber 760158337 443776 PS42U600W1200D R6-A2333333 Six cord cassettes, A through F positions, Category 6A, light blue, 24 OM4 fiber 760158345 443777 PS42U600W1200D R2-A3330000 Two cord cassettes, A and B positions, Category 6A, dark gray, 24 OM4 fiber 760158477 443778 PS42U600W1200D R2-A3003300 Two cord cassettes, C and D positions, Category 6A, dark gray, 24 OM4 fiber 760158485 443779 PS42U600W1200D R4-A3333300 Four cord cassettes, A through D positions, Category 6A, dark gray, 24 OM4 fiber 760158493 443780 PS42U600W1200D R6-A3333333 Six cord cassettes, A through F positions, Category 6A, dark gray, 24 OM4 fiber 760158501 443781 PS42U600W1200D R2-B2330000 Two cord cassettes, A and B positions, Category 6, light blue, 24 OM4 fiber 760158519 443782 PS42U600W1200D R2-B2003300 Two cord cassettes, C and D positions, Category 6, light blue, 24 OM4 fiber 760158527 443783 PS42U600W1200D R4-B2333300 Four cord cassettes, A through D positions, Category 6, light blue, 24 OM4 fiber 760158535 443784 PS42U600W1200D R6-B2333333 Six cord cassettes, A through F positions, Category 6, light blue, 24 OM4 fiber 760158543 443785 PS42U600W1200D R2-B3330000 Two cord cassettes, A and B Positions, Category 6, dark gray, 24 OM4 fiber 760158352 443786 PS42U600W1200D R2-B3003300 Two cord cassettes, C and D positions, Category 6, dark gray, 24 OM4 fiber 760158360 443787 PS42U600W1200D R4-B3333300 Four cord cassettes, A through D positions, Category 6, dark gray, 24 OM4 fiber 760158378 Request the latest literature and guides from Anixter. 4.32 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management CommScope Solutions CORD CASSETTES PR34245V2-251944.eps Cord cassettes are available in two configurations. Powered by either SYSTIMAX GigaSPEED X10D or GigaSPEED XL, the copper cord cassettes come with 12 U/UTP patch cords. The mixed media cassettes contain 12 U/UTP (GigaSPEED X10D or GigaSPEED XL) and 24 OM4 fiber ruggedized fanout (for 12 LazrSPEED 550 Duplex LC connections). For initial deployment, cord cassettes are pre-installed and configured in the zero U space of a 600 mm wide server cabinet. Anixter No. Vendor No. Description Material ID 443809 ZC12A2B0000-F006 Cord cassette, Category 6A, copper only, light blue, 6 feet ZC12A2B0000-F006 443810 ZC12A2B0000-F008 Cord cassette, Category 6A, copper only, light blue, 10 feet ZC12A2B0000-F008 443811 ZC12A2B0000-F010 Cord cassette, Category 6A, copper only, light blue, 10 feet ZC12A2B0000-F010 443812 ZC12A3B0000-F006 Cord cassette, Category 6A, copper only, dark gray, 6 feet ZC12A3B0000-F006 443813 ZC12B2B0000-F006 Cord cassette, Category 6, copper only, light blue, 6 feet ZC12B2B0000-F006 443814 ZC12B2B0000-F008 Cord cassette, Category 6, copper only, light blue, 8 feet ZC12B2B0000-F008 443815 ZC12B2B0000-F010 Cord cassette, Category 6, copper only, light blue, 10 feet ZC12B2B0000-F010 443816 ZC12A2B24LP-F006 Cord cassette, Category 6A, mixed media, light blue, 6 feet ZC12A2B24LP-F006 443817 ZC12A2B24LP-F008 Cord cassette, Category 6A, mixed media, light blue, 8 feet ZC12A2B24LP-F008 443818 ZC12A2B24LP-F010 Cord cassette, Category 6A, mixed media, light blue, 10 feet ZC12A2B24LP-F010 443819 ZC12A3B24LP-F006 Cord cassette, Category 6A, mixed media, dark gray, 6 feet ZC12A3B24LP-F006 443820 ZC12A3B24LP-F008 Cord cassette, Category 6A, mixed media, dark gray, 8 feet ZC12A3B24LP-F008 443821 ZC12A3B24LP-F010 Cord cassette, Category 6A, mixed media, dark gray, 10 feet ZC12A3B24LP-F010 443822 ZC12B2B24LP-F006 Cord cassette, Category 6, mixed media, light blue, 6 feet ZC12B2B24LP-F006 443823 ZC12B2B24LP-F008 Cord cassette, Category 6, mixed media, light blue, 8 feet ZC12B2B24LP-F008 443824 ZC12B2B24LP-F010 Cord cassette, Category 6, mixed media, light blue, 10 feet ZC12B2B24LP-F010 443825 ZC12B3B24LP-F006 Cord cassette, Category 6, mixed media, dark gray, 6 feet ZC12B3B24LP-F006 OVERHEAD MINI-RACKS Patch cords are bundled into a trunk assembly that feeds out of the cabinet's top and connects to a 4U equipment rack that mounts to the overhead pathway. It accepts standard 19 in. patch panels and electronics and provides the transition between the permanent overhead cabling and the server cabinet. Anixter No. Vendor No. Description Material ID 443844 OVRHDRACK 19 in., 4U 760157800 443846 OVRHDRACKVCM 19 in., 4U with Vertical Cable Manager 760158592 Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.33 Racks, Cabinets and Cable Management CommScope Solutions Racks;Two- and Four-post/16433 Index1.Support and Supplies//Physical Support Structure//Racks Anixter No. Vendor No. Description Material ID Racks and Accessories 443501 RK6-58S 6 in. D channel x 9 ft. H x 19 in. W, 58U, 760139121 3/8 in. square-punched rails, black COMMSCOPE 372119 RK12-45S 12 in. D channel x 7 ft. H x 19 in. W, 760090159 While a necessity for managing, distributing and controlling structured cabling, all 45U, 3/8 in. square-punched racks and cable management devices are not created equal. CommScope rails, black understands the potential negative impact on network performance and company 372120 RK12-52S 12 in. D channel x 8 ft. H x 19 in. W, 760090167 productivity when installation and accessibility are challenging. CommScope designs 52U, 3/8 in. square-punched its racks and cable management devices with the same level of detail and importance rails, black as its infrastructure solutions, ensuring that customers get the best product to FOUR-POST RACKS: ALUMINUM PR29305V2-216932.eps protect and manage their investment. Available in two-post and four-post options. TWO-POST RACKS: ALUMINUM PR29304V2-216929.eps Anixter No. Vendor No. Description Material ID 372124 RK4P45-29A 29 in. D x 7 ft. H x 19 in. W, 45U, 760082529 #12-24 tapped rails, black Anixter No. Vendor No. Description Material ID 372125 RK4P52-29A 29 in. D x 8 ft. H x 19 in. W, 52U, 760082537 387783 RK3-17A 3 in. D channel x 3 ft H x 19 in. W, 17U, 760103010 #12-24 tapped rails, black #12 - 24 tapped rails, black 372128 RK4P45-36A 36 in. D x 7 ft. H x 19 in. W, 45U, 760082560 365799 RD K3-45A 3 in. D channel x 7 ft. H x 19 in. W, 45U, 760082479 #12-24 tapped rails, black #12-24 tapped rails, black 372129 RK4P52-36A 36 in. D x 8 ft. H x 19 in. W, 52U, 760082578 372111 RK3-52A 3 in. D channel x 8 ft. H x 19 in. W, 52U, 760082487 #12-24 tapped rails, black #12-24 tapped rails, black 443509 RK4P58-36A 36 in. D x 9 ft. H x 19 in. W, 58U, 760139709 443492 RK3-52A-23 3 in. D channel x 8 ft. H x 23 in. W, 52U, 760159749 #12-24 tapped rails, black #12-24 tapped rails, black FOUR-POST RACKS: STEEL 443495 RK3-58A 3 in. D channel, 9 ft H x 19 in. W, 58U, 760139113 #12 - 24 tapped rails, black Anixter No. Vendor No. Description Material ID 443496 RK3-23-58A 3 in. D channel, 9 ft H x 23 in. W, 58U, 760142364 372126 RK4P45-29S 29 in. D x 7 ft. H x 19 in. W, 45U, 760082545 #12 - 24 tapped rails, black 3/8 in. square-punched rails, black 366103 RK6-45A 6 in. D channel x 7 ft. H x 19 in. W, 45U, 760082495 372127 RK4P52-29S 29 in. D x 8 ft. H x 19 in. W, 52U, 760082552 #12-24 tapped rails, black 3/8 in. square-punched rails, black 372112 RK6-52A 6 in. D channel x 8 ft. H x 19 in. W, 52U, 760082503 372130 RK4P45-36S 36 in. D x 7 ft. H x 19 in. W, 45U, 760082586 #12-24 tapped rails, black 3/8 in. square-punched rails, black 372113 RK12-45A 12 in. D channel x 7 ft. H x 19 in. W, 760082511 372131 RK4P52-36S 36 in. D x 8 ft. H x 19 in. W, 52U, 760082594 45U, #12-24 tapped rails, black 3/8 in. square-punched rails, black 372114 RK12-52A 12 in. D channel x 8 ft. H x 19 in. W, 760090100 FILLER PANELS 52U, #12-24 tapped rails, black Anixter No. Vendor No. Description Material ID TWO-POST RACKS: STEEL 372140 RKFP1U-B Filler panel, 1U x 19 in. W, black 760085712 Anixter No. Vendor No. Description Material ID 372141 RKFP2U-B Filler panel, 2U x 19 in. W, black 760085720 372115 RK3-45S 3 in. D channel x 7 ft. H x 19 in. W, 45U, 760090118 372142 RKFP3U-B Filler panel, 3U x 19 in. W, black 760085738 3/8 in. square-punched rails, black 372116 RK3-52S 3 in. D channel x 8 ft. H x 19 in. W, 52U, 760090126 3/8 in. square-punched rails, black 372117 RK6-45S 6 in. D channel x 7 ft. H x 19 in. W, 45U, 760090134 3/8 in. square-punched rails, black 372118 RK6-52S 6 in. D channel x 8 ft. H x 19 in. W, 52U, 760090142 3/8 in. square-punched rails, black Request the latest literature and guides from Anixter. 4.34 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management CommScope Solutions Cabinets;Accessories/17848 Cable Management;Horizontal/16437 Index1.Support and Supplies//Physical Support Structure//Racks Index1.Support and Supplies//Physical Support Structure//Accessories Integrated Camera Panel Kit Horizontal Cable Management COMMSCOPE-SYSTIMAX SOLUTIONS PR34031V2-251679.eps COMMSCOPE PR24021V2-174007.eps The new black 2U adjustable integrated security panel kit is compatible with the AXIS The horizontal cable management portfolio includes cable management troughs and M10 Network Camera Series. The camera panel kit, with the incorporation of a covers in a variety of heights with both single- and double-sided solutions available. compatible AXIS Communications M10 Network Camera will aid in the recording and The horizontal cover hinges up or down and easily snaps into position. The open back monitoring of all activity within an assigned rack or cabinet. on the 2RU and 3RU version allow for easy pass-through of cables. This unique black 2U security panel kit will be powered with a single UTP connection, FEATURES which makes this panel ideal for large scale roll-outs where infrastructure already • Horizontal cover hinges up or down and locks into position with cylindrical exists or where limited space may make installations difficult. Given the panel is fully finger ends for easy snap-on installation adjustable and made to tilt in order to capture desired image, it is also ideal for • Open back on 2U and 3U horizontal troughs for easy pass-through of cables environments where an additional layer of security is necessary. 19 IN. SINGLE-SIDED HORIZONTAL TROUGH KIT The panel can be angled and aligned with the appropriate camera settings that allow Anixter No. Vendor No. Description Material ID end-users complete surveillance of their rack or cabinet entry ways. 365172 HTK-19-SS-1U 1RU 760072942 FEATURES 365173 HTK-19-SS-2U 2RU 760072959 • Patent pending design 365174 HTK-19-SS-3U 3RU 760072967 • Compatible with AXIS Communications M10 Series • Adjustable pivot 19 IN. DOUBLE-SIDED HORIZONTAL TROUGH KIT • Security within and inside cabinet Anixter No. Vendor No. Description Material ID • Audio optional 425806 HTK-19-DS-1U 1RU 760128843 • PIR optional 425809 HTK-19-DS-2U 2RU 760128850 • White light LED optional 425812 HTK-19-DS-3U 3RU 760128868 • I/O contact port optional • Motion detection • Event notification via e-mail • Remotely accessible • Remotely managed • HDTV-compliant video optional Anixter No. Vendor No. Material ID 438822 ICP-19-2U KIT 760152512 This product is suggested to be used with the SecureMAX Locking Patch Cord System and/or the iPatch Intelligent Solution for maximum security, knowledge and control over networks at all times. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.35 Racks, Cabinets and Cable Management CommScope Solutions Cable Management;Vertical/15358 Index1.Support and Supplies//Physical Support Structure//Racks VERTICAL CABLE MANAGEMENT, SINGLE-SIDED WITH DOORS PR24020V2-174003.eps Vertical Cable Management COMMSCOPE CommScope's vertical cable management portfolio is flexible, functional, and has a sleek design consistent with SYSTIMAX 360 products. Vertical cable managers come in a variety of vertical trough widths with several door options. Door options include the sturdy but lightweight patented Slam Latch doors. Slam Latch doors come with a patented latching mechanism for easy close, recessed handles, and doors are hinged to open both to the left and to the right. These doors are removable and come in either black or silver. The other option is the Snap-on Twin Door available in black. Slam Latch and Snap-on doors come in single- or double-sided versions. Contoured Anixter No. Vendor No. Description Material ID cable fingers separate, organize and maintain patch cords in the desired position. 365260 VCM-SS-84-6 VCM kit, 6 in. x 84 in., 760072868 These flexible "x-style" fingers allow cables easily in or out for quick cable routing stainless steel and are spaced at 1RU increments allowing for exact alignment with EIA standard 372099 VCM-SS-84-6B VCM kit, 6 in. x 84 in., black 760089425 rack spacing. Spools and spooling kits are also available. 365261 VCM-SS-84-8 VCM kit, 8 in. x 84 in., 760072876 FEATURES stainless steel 372100 VCM-SS-84-8B VCM kit 8 in. x 84 in., black 760089433 • Ergonomically designed and aesthetically pleasing • Lightweight, but sturdy, door available in four widths 365258 VCM-SS-84-10 VCM kit, 10 in. x 84 in., 760072884 • Dual hinge latching door can be opened right or left stainless steel • Patent pending door latching mechanism with easy closing feature 372101 VCM-SS-84-10B VCM kit, 10 in. x 84 in., black 760089441 • Cable fingers spaced at 1 RMU increments for exact alignment with EIA standard 365259 VCM-SS-84-12 VCM kit, 12 in. x 84 in., 760072892 rack spacing stainless steel • Cable fingers support up to 48 cables per RMU 372102 VCM-SS-84-12B VCM kit, 12 in. x 84 in., black 760089458 • Easy one point removal and installation process for door 443514 VCM-SS-102-12B VCM kit, 12 in. x 108 in., black 760142356 • Recessed handle eliminates snag potential for clothes and arms VERTICAL CABLE MANAGEMENT, TWIN COVER PR33997V2-251680.eps • Doors standard on all cable management both single- and double-sided D • C Channel bracket allows for easy access to the cable trough • Tool-less installation of Cable Spool VERTICAL CABLE MANAGEMENT, DOUBLE-SIDED WITH DOORS PR24019V2-174005.eps Anixter No. Vendor No. Description Material ID 432840 VCM-SS-84-6-TD Twin Cover VCM, single-sided, 760124693 84 in. H x 6 in. W 432842 VCM-SS-84-8-TD Twin Cover VCM, single-sided, 760124701 Anixter No. Vendor No. Description Material ID 84 in. H x 8 in. W 365256 VCM-DS-84-6 VCM kit, 6 in. x 84 in., 760072785 432841 VCM-DS-84-6-TD Twin Cover VCM, double-sided, 760124719 stainless steel 84 in. H x 6 in. W 372087 VCM-DS-84-6B VCM kit, 6 in. x 84 in., black 760089342 432843 VCM-DS-84-8-TD Twin Cover VCM, double-sided, 760124727 365257 VCM-DS-84-8 VCM kit, 8 in. x 84 in., 760072793 84 in. H x 8 in. W stainless steel 372088 VCM-DS-84-8B VCM kit, 8 in. x 84 in., black 760089359 365254 VCM-DS-84-10 VCM kit, 10 in. x 84 in., 760072801 stainless steel 372089 VCM-DS-84-10B VCM kit, 10 in. x 84 in., black 760089367 365255 VCM-DS-84-12 VCM kit, 12 in. x 84 in., 760072819 stainless steel 372090 VCM-DS-84-12B VCM kit, 12 in. x 84 in., black 760089375 443513 VCM-DS-108-12B VCM kit, 12 in. x 108 in., black 760142398 Request the latest literature and guides from Anixter. 4.36 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Cooper B-Line ./Cabinets;Free-standing, Network/15445 Index1.Support and Supplies//Physical Support Structure//Cabinets V-Line Cabinets COOPER B-LINE PR24157V2-175177.eps PR22461V2-132814.eps Cooper B-Line developed the V-Line enclosure platform, a 19 in. system designed to be versatile enough to exceed performance expectations in today's dynamic networking environments yet be a competitively priced solution. Many innovative features are designed into the V-Line platform, offering valuable benefits for users. The heart of the system, the V-Line frame, has standard features such as fully adjustable 19 in. mounting angles with permanent RMU markings, removable and replaceable cable entry plates and leveling feet. The frame can be fitted with a range of options including solid or vented side panels, a variety of door styles and top or bottom panels - all designed to offer the flexibility to meet all application requirements for modern data communications systems. The V-Line features excellent aesthetic characteristics and is built to the high quality standard that customers have come to expect. All of these features, benefits, good looks and high quality are offered at a very competitive price point, which makes the V-Line an excellent choice for anyone needing to house data communications equipment while watching the bottom line! FEATURES • Versatile system design with innovative designs and features • Economical enclosure solution • Constructed of high-quality materials • Fully welded steel construction • EIA-310-D compliant • UL Listed platform, rated for 1,500 lb. (680 kg) load rating • Multiple options for doors, locks, sides and tops • Excellent availability and quick shipment Ordering the V-Line enclosure solution can be done by ordering individual components or ordering a configured enclosure solution with a single part number. Use the matrix above to build the part number for your desired V-Line configuration. Contact your local sales representative for further information. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.37 Racks, Cabinets and Cable Management Cooper B-Line Cabinets;Free-standing, Network/3808 Cabinets;Free-standing, Seismic/10502 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets Access Electronic Cabinets E2 Seismic Zone 4 Cabinet COOPER B-LINE PR10066V2-143849.eps COOPER B-LINE PR10073V2-143850.eps Cooper B-Line's Access cabinet systems provide a unique patented design allowing The E2 Seismic Zone 4 Cabinet offers certified protection in seismic locations. 360° accessibility around interior components and technology hardware systems. Designed to withstand maximum vibration with minimal deflection as a standalone This enclosure is ideal for all networking and data processing equipment and comes cabinet. When ganged in suites it becomes a data network fortress. The E2 Seismic with a multitude of accessories including shelving, wire management, thermal Zone 4 is recommended for any application where the threat of damage from physical management and power distribution and exterior features. shock could hinder vital data and communications equipment. FEATURES FEATURES • Available in three widths (600 mm and 700 mm for 19 in. EIA mounting and • Tested in accordance with NEBS GR-63-CORE and ANSI T1.329 800 mm for both 19 in. and 23 in. EIA mounting) • Tested to 900 lb. standalone system weight per NEBS GR-63-CORE and • Available in five heights that have open mounting U's of 47, 42, 39, 32 and 27 ANSI T1.329 • Available in four depths in the 42 and 47 U heights: 675 mm (26 1/2 in.), • Includes seismic anchor kits 915 mm (36 in.), 1,000 mm (39 3/8 in.) and 1,200 mm (47 1/4 in.). All other • Reinforced cabinet frame for added rigidity heights are available in all depths except for 1,200 mm • Heavy-duty welded base frame • Five door options: glass, acrylic, standard vented (53 percent open), high flow • Specially designed locking side panel latches D vented (80 percent open) and solid steel • Smoked plexiglass removable front-locking door • Two side panel options include vented and solid • Louvered top/bottom removable rear-locking door • Top options that include fan units, vented panels, solid panels and cable entries • Two pairs of adjustable mounting rails • Fixed, sliding and keyboard shelf options • Standard colors: black and light gray powder coat finish • Caster kits, lower beauty skirts and antitip bases Anixter No. Vendor No. Description • Horizontal and vertical multi-outlet power cords 268288 E2Z484243619BL E2 Zone 4, 84 in. H x 24 in. W x • Horizontal and vertical cable management 36 in. D, black • Universal Product Code for customer-driven configurations 268289 E2Z484244019BL E2 Zone 4, 84 in. H x 24 in. W x • UL Listed 40 in. D, black Anixter No. Vendor No. Description 268290 E2Z484293619BL E2 Zone 4, 84 in. H x 29 in. W x 249373 A4269A1NGSP3NVB 42 rack units H x 24 in. W x 36 in. D, glass 36 in. D, black front door, vented rear, 315 cfm top 268291 E2Z484294019BL E2 Zone 4, 84 in. H x 29 in. W x panel, plain side panels black 40 in. D, black 249375 A4769A1NGSP3NVB 47 rack units H x 24 in. W x 36 in. D, glass front door, vented rear, 315 cfm top panel, plain side panels black There are many available configurations of the Access Cabinet. Contact your local sales representative for further information. Request the latest literature and guides from Anixter. 4.38 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Cooper B-Line Cabinets;Wall-mount/10488 networking gear safely and securely, holding up to 150 lb. of equipment. Main Index1.Support and Supplies//Physical Support Structure//Cabinets features include: welded steel construction, removable locking side panels, Hinge and Fixed-frame Wall-mount Cabinets reversible locking glass front door, cutouts for fans and adequate openings for venting. UL Listed. COOPER B-LINE Anixter No. Vendor No. Description Cooper B-Line offers an innovative selection of wall-mounted products with designs 354548 VWM242412 24 in. H x 24 in. W x 12 in. D, black and features to fit most applications. All B-Line wall-mount products conform to EIA 310-D Universal hole spacing and are manufactured from high-quality steel. B-Line 354549 VWM242418 24 in. H x 24 in. W x 18 in. D, black wall-mount cabinets are designed to provide solid support, protection and the 366406 VWM242424 24 in. H x 24 in. W x 24 in. D, black required flexibility for present and future technology. 354546 VWM362412 36 in. H x 24 in. W x 12 in. D, black 354547 VWM362418 36 in. H x 24 in. W x 18 in. D, black V-LINE DUAL-HINGE WALL CABINETS PR24156V2-175174.eps 366409 VWM362424 36 in. H x 24 in. W x 24 in. D, black Racks;Two- and Four-post/3796 Index1.Support and Supplies//Physical Support Structure//Racks Two-post and Four-post Racks COOPER B-LINE RELAY RACKS PR22450V2-132830.eps V-Line Dual-Hinge Wall Cabinets feature welded steel construction, a field-reversible, heavy-duty hinge and lock system, provisions for 16 in. on-center mounting and multiple wire management lances for cable tie points or accessory mounting. Removable plate allows for knockout or gland plate entry into the cabinets. UL Listed with an equipment load rating of 150 to 175 lb. depending on size. Anixter No. Vendor No. Description 380269 VLWM2420PB 24 in. H x 24.7 in. W x 20 in. D, 12U, plexiglass door, black Cooper B-Line offers a comprehensive line of aluminum relay racks in 3 in. and 6 in. 380275 VLWM3620PB 36 in. H x 24.7 in. W x 20 in. D, 19U, frame rail depths. These relay racks are designed to support switches, patch panels, cable management and other networking equipment. Double-sided EIA Universal plexiglass door, black hole pattern rails with #12-24 tapped holes are standard. These racks ship 380281 VLWM4820PB 48 in. H x 24.7 in. W x 20 in. D, 26U, unassembled and individually packaged in a protective carton. RMU markings are plexiglass door, black permanently stamped into the rack rails. UL Listed. Load rating 1,200 lb. 380271 VLWM2425PB 24 in. H x 24.7 in. W x 25 in. D, 12U, (evenly distributed). plexiglass door, black Anixter No. Vendor No. Description 380277 VLWM3625PB 36 in. H x 24.7 in. W x 25 in. D, 19U, 245387 SB556084XUAL 7 ft. H with 19 in. mounting, 3 in. D, plexiglass door, black RMU marks, brushed finish 380283 VLWM4825PB 48 in. H x 24.7 in. W x 25 in. D, 26U, 245388 SB556084XUFB 7 ft. H with 19 in. mounting, 3 in. D, plexiglass door, black RMU marks, flat black 380273 VLWM2430PB 24 in. H x 24.7 in. W x 30 in. D, 12U, 268204 SB556084XUTG 7 ft. H with 19 in. mounting, 3 in. D, plexiglass door, black RMU marks, telco gray 380279 VLWM3630PB 36 in. H x 24.7 in. W x 30 in. D, 19U, 280810 SB55608419U6FB 7 ft. H with 19 in. mounting, 6 in. D, plexiglass door, black RMU marks, flat black 380285 VLWM4830PB 48 in. H x 24.7 in. W x 30 in. D, 26U, 184096 SB558084XUAL 7 ft. H with 23 in. mounting, 3 in. D, plexiglass door, black RMU marks, brushed finish 380292 VLWMFKB Fan kit, one 105 cfm fan with filter, 245157 SB558084XUFB 7 ft. H with 23 in. mounting, 3 in. D, blanking plates and power cord RMU marks, flat black 268207 SB558084XUTG 7 ft. H with 23 in. mounting, 3 in. D, VWM SINGLE-SECTION WALL CABINETS PR20710V2-83474.eps RMU marks, telco gray Cooper B-Line VWM Series single-section wall-mount enclosures are a fully featured yet cost-effective product. The EIA-310-D-compliant design accepts standard Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.39 Racks, Cabinets and Cable Management Cooper B-Line (continued) Two-post and Four-post Racks Anixter No. Vendor No. Description 425031 SB81008 84 in. H rack with two 8 in. cable FOUR-POST STANDARD AND SERVER RACKS PR22451V2-132834.eps managers, black 425032 SB81010 84 in. H rack with two 10 in. cable managers, black Racks;Wall-mount/3797 Index1.Support and Supplies//Physical Support Structure//Racks Wall-mount Racks COOPER B-LINE HEAVY-DUTY FIXED RACKS PR24158V2-175173.eps Cooper B-Line offers a range of depth adjustable four-post standard and server racks. These racks are depth adjustable in 1 in. increments from 18 in. to 24 in., 24 in. to 30 in., 30 in. to 36 in. or 36 in. to 42 in. Available with #12-24 pre-tapped mounting rails (SB837 series) or EIA square hole rails (SB838 series). These racks ship unassembled and individually packed in a protective carton. Load rating: 2,000 lb. UL Listed. Anixter No. Vendor No. Description 376128 SB837084AFB 84 in. H with 19 in. mounting, 18 in. to 24 in. D, #12-24 tapped rails, flat black 376129 SB837084BFB 84 in. H with 19 in. mounting, 24 in. to These heavy-duty fixed wall-mount racks are designed for use in applications where 30 in. D, #12-24 tapped rails, flat black limited space is available. Load capacity: 350 lb. 376130 SB837084CFB 84 in. H with 19 in. mounting, 30 in. to Anixter No. Vendor No. Description 36 in. D, #12-24 tapped rails, flat black 324284 SB704192518FB 25 in. H x 19 in. W x 18 in. D, flat black 376131 SB837084DFB 84 in. H with 19 in. mounting, 36 in. to 324285 SB704192524FB 25 in. H x 19 in. W x 24 in. D, flat black 42 in. D, #12-24 tapped rails, flat black 331929 SB704192518AL 25 in. H x 19 in. W x 18 in. D, 376132 SB838084AFB 84 in. H with 19 in. mounting, 18 in. to D brushed finish 24 in. D, EIA square hole rails, flat black 331930 SB704192524AL 25 in. H x 19 in. W x 24 in. D, 376133 SB838084BFB 84 in. H with 19 in. mounting, 24 in. to brushed finish 30 in. D, EIA square hole rails, flat black 376135 SB838084CFB 84 in. H with 19 in. mounting, 30 in. to SWING GATE WALL-MOUNT EQUIPMENT RACKS PR20496V2-77425.eps 36 in. D, EIA square hole rails, flat black 376136 SB838084DFB 84 in. H with 19 in. mounting, 36 in. to 42 in. D, EIA square hole rails, flat black Racks;Two-post/17480 Index1.Support and Supplies//Physical Support Structure//Racks RCM Rack and Cable Management Value Pack COOPER B-LINE PR28980V2-214348.eps The SB708 series wall-mounted rack hinges on both sides and provide easy access to the back of the equipment. Packaged unassembled in protective carton suitable for parcel shipment. Easily installed by one person. Load capacity 150 lb. UL Listed. Other sizes and finishes available. Anixter No. Vendor No. Description 354172 SB708193018FB Swing gate 30 in. H x 19 in. W x 18 in. D, flat black 354173 SB708193025FB Swing gate 30 in. H x 19 in. W x 25 in. D, RCM Value Packs contain one standard 7 ft. equipment rack and two high-density, flat black single-sided cable managers. Parts ship in one convenient package and are designed with captive mounting nuts for easy, one person assembly. 354174 SB708194418FB Swing gate 44 in. H x 19 in. W x 18 in. D, flat black Anixter No. Vendor No. Description 354175 SB708194425FB Swing gate 44 in. H x 19 in. W x 25 in. D, 425030 SB81006 84 in. H rack with two 6 in. cable flat black managers, black Request the latest literature and guides from Anixter. 4.40 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Cooper B-Line Shelves;Rack Shelves/3800 Index1.Support and Supplies//Physical Support Structure//Accessories FRONT-MOUNTING CANTILEVER SHELF This 2U high wide shelf is ideal for supporting networking equipment that can not be Rack Shelves rack-mounted. Fits 19 in. rail spacing. Load rating: 60 lb. COOPER B-LINE pr5429V2-143881.eps Anixter No. Vendor No. Description 285068 E2SHCLSLP1915PB 15 in. deep, flat black Racks;Accessories/2196 Index1.Support and Supplies//Physical Support Structure//Accessories Anchor Kits COOPER B-LINE PR12044V2-21894.eps Cooper B-Line steel aluminum shelves are designed for supporting equipment that cannot be rack-mounted. Available with a solid or vented support surface for 19 in. rack (23 in. also available). UL Listed. SOLID SINGLE-SIDED SHELVES FOR 19 IN. RACKS Supports loads up to 100 lb. Use to securely anchor equipment racks to concrete. Finish: clear zinc Anixter No. Vendor No. Description Anixter No. Vendor No. Description 198363 SB747S1910AAL 17.5 in. W x 10 in. D, aluminum brushed finish 212190 SB588AZN Self-supporting rack anchor kit, includes four 3/8 in.-16 x 2 3/4 in. (70 mm) wedge 354176 SB747S1910SSL 17.5 in. W x 10 in. D, steel silver finish anchors and hardware 217114 SB747S1915AAL 17.5 in. W x 15 in. D, aluminum brushed finish Cable Management;Vertical and Horizontal/3799 Index1.Support and Supplies//Physical Support Structure//Accessories 354177 SB747S1915SSL 17.5 in. W x 15 in. D, steel silver finish Wire Management 268224 SB747S1910AFB 17.5 in. W x 10 in. D, aluminum flat black COOPER B-LINE 354178 SB747S1910SFB 17.5 in. W x 10 in. D, steel flat black 268226 SB747S1915AFB 17.5 in. W x 15 in. D, aluminum flat black Cooper B-Line's vertical and horizontal wire managers are designed to attach to standard EIA 19 in. and 23 in. racks and to provide economical and versatile cable 354179 SB747S1915SFB 17.5 in. W x 15 in. D, steel flat black management solutions. Double-sided versions are also available. RCM+ SINGLE- AND DOUBLE-SIDED HIGH-DENSITY VERTICAL CABLE MANAGERS PR11217V2-25368.eps Shelves;Cabinet Shelves/3937 Index1.Support and Supplies//Physical Support Structure//Accessories Cabinet Shelves COOPER B-LINE PR11074V2-18098.eps SLIDING SHELVES High-density vertical cable managers with 1 RMU spacing and open back are designed for use in applications with higher cable density and more demanding Telescopic slide mounted, 19-in. wide, ventilated, black, steel shelves are designed cable routing. Available in extended depths for high-performance media or for use in four-post racks, Access and V-Line cabinets. Load rating: 150 lb. high-density installations. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 250925 E2SHSS1920FB 20 in. deep 313642 SB86083S084FB Vertical cabling section 7 ft. H x 9 3/8 in. 250926 E2SHSS1924BLP 24 in. deep D x 3 5/8 in. W, flat black, single-sided 250927 E2SHSS1930BLP 30 in. deep 313643 SB86086S084FB Vertical cabling section 7 ft. H x 9 3/8 in. FIXED SHELVES D x 6 in. W, flat black, single-sided Black, ventilated, steel fixed shelves are designed for use in four-post racks, Access 313644 SB860810S084FB Vertical cabling section 7 ft. H x 9 3/8 in. and V-Line cabinets. Shelf-mounting brackets permit attachment to the mounting D x 10 in. W, flat black, single-sided rail from the front or side. Load rating: 150 lb. 313645 SB860812S084FB Vertical cabling section 7 ft. H x 9 3/8 in. Anixter No. Vendor No. Description D x 12 in. W, flat black, single-sided 250937 E2SH4P1920BLP 20 in. deep 313646 SB86083D084FB Vertical cabling section 7 ft. H x 250938 E2SH4P1924BLP 24 in. deep 18 5/8 in. D x 3 5/8 in. W, flat 250940 E2SH4P1930BLP 30 in. deep black, double-sided Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.41 Racks, Cabinets and Cable Management Cooper B-Line (continued) Wire Management Anixter No. Vendor No. Description 376152 SB8641010D084FB Deep vertical combination cabling Anixter No. Vendor No. Description section 7 ft. H x 20 3/8 in. D x 10 in. W, 313647 SB86086D084FB Vertical cabling section 7 ft. H x flat black, double-sided 18 5/8 in. D x 6 in. W, flat 376153 SB8641012D084FB Deep vertical combination cabling black, double-sided section 7 ft. H x 20 3/8 in. D x 12 in. W, 313648 SB860810D084FB Vertical cabling section 7 ft. H x flat black, double-sided 18 5/8 in. D x 10 in. W, flat black, double-sided RCM+ HORIZONTAL CABLE MANAGERS SINGLE-SIDED PR11219V2-25365.eps 313649 SB860812D084FB Vertical cabling section 7 ft. H x 18 5/8 in. D x 12 in. W, flat black, double-sided 376154 SB860106D084FB Deep vertical cabling section 7 ft. H x 23 5/8 in. D x 6 in. W, flat black, double-sided 376155 SB8601010D084FB Deep vertical cabling section 7 ft. H x Cooper B-Line offers single-sided horizontal cable managers with closely spaced 23 5/8 in. D x 10 in. W, flat fingers and an open design to provide a horizontal pathway for patch cords. The black, double-sided removable, "snap-on" hinged doors opens up or down past 180° and will remain 376156 SB8601012D084FB Deep vertical cabling section 7 ft. H x open in up position. 23 5/8 in. D x 12 in. W, flat Anixter No. Vendor No. Description black, double-sided 313662 SB87019S1FB Horizontal cable manager 19 in. W - 1U, RCM+ DOUBLE-SIDED COMBINATION VERTICAL CABLE MANAGERS flat black, single-sided PR11218V2-25371.eps 313663 SB87019S2FB Horizontal cable manager 19 in. W - 2U, flat black, single-sided 313664 SB87019S3FB Horizontal cable manager 19 in. W - 3U, flat black, single-sided D RCM+ HORIZONTAL CABLE MANAGERS DOUBLE-SIDED PR22457V2-133154.eps Combination back-to-back vertical cable managers are designed for use in applications with differing cable management requirements on the front and back of the rack. Front section featuring 1 RMU spaced fingers with snap-on removable hinged doors for high-density cabling. Rear section featuring widely spaced fingers with snap-on hinged gates for low-density cabling. Available in extended depths for high-performance media or high-density installations. Cooper B-Line offers double-sided horizontal cable managers with closely spaced Anixter No. Vendor No. Description fingers and an open design to provide a horizontal pathway for patch cords. The 313650 SB86483D084FB Vertical combination cabling section removable, "snap-on" hinged doors opens up or down past 180° and will remain 7 ft. H x 17 7/8 in. D x 3 5/8 in. W, flat open in up position. black, double-sided Anixter No. Vendor No. Description 313651 SB86486D084FB Vertical combination cabling section 376148 SB87019D1FB Horizontal cable manager 19 in. W - 1U, 7 ft. H x 17 7/8 in. D x 6 in. W, flat flat black, double-sided black, double-sided 376149 SB87019D2FB Horizontal cable manager 19 in. W - 2U, 313652 SB864810D084FB Vertical combination cabling section flat black, double-sided 7 ft. H x 17 7/8 in. D x 10 in. W, flat 376150 SB87019D3FB Horizontal cable manager 19 in. W - 3U, black, double-sided flat black, double-sided 313653 SB864812D084FB Vertical combination cabling section RCM+ VERTICAL CABLE MANAGER ACCESSORIES 7 ft. H x 17 7/8 in. D x 12 in. W, flat Cable strap mounts attach to the 1/4 in. holes in vertical cable managers with black, double-sided push-in fasteners (SB862PIF). Push-in fasteners are used to quickly attach 376151 SB864106D084FB Deep vertical combination cabling accessories to 1/4 in. mounting holes in cable vertical manager. section 7 ft. H x 20 3/8 in. D x 6 in. W, Anixter No. Vendor No. Description flat black, double-sided 313667 SB862CSM Cable strap mount 1/4 in. mounting hole, cable straps up to 3/4 in. wide, black 313668 SB862PIF 1/4 in. push-in fastener, white Request the latest literature and guides from Anixter. 4.42 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Great Lakes Case & Cabinets Co., Inc. ./Cabinets;Free-standing, Network and Server/2584 Cabinets;Free-standing, Server/2257 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets E Series Enclosures ES Server Enclosures GREAT LAKES CASE & CABINET PR23685V2-168271.eps GREAT LAKES CASE & CABINET PR23686V2-168286.eps The E Series of enclosures provide a feature-rich cabinet for housing The ES Server line of cabinets are designed specifically to create an ideal environment telecommunications equipment, computer control room hardware, LAN equipment for server equipment; several built-in features enhance the cable management and and other sensitive electronic equipment. Each cabinet includes: two 19 in. universal power necessary for a data center. The 30 in. width of the cabinet provides additional cage nut rails, adjustable levelers and pack of mounting screws, removable vented cable space between mounting rails and side panels while extra depth of rear corner top panel with two 4 in. horseshoe knockouts, plexiglass door with locking swing posts also provide room for cabling and power accessories. Cable access originating handle, perimeter vented steel rear door with locking swing handle, pair of solid from the top of the cabinet is independent of the removable top panel while lift-off side panels with lock and finger release latches and a compatible power strip accessories for overhead management help expedite the flow of cable from the with circuit breaker and 15 ft. cord. Available in Advantage Gray, Nitro Blue or cabinet. Recessed plate casters create a more durable cabinet offering a high Black color. 2,000 lb. weight capacity. New contour mesh doors, standard with every cabinet, feature a reinforced frame for security, an easy latching door handle and provisions FEATURES to mount fans (to eliminate hot spots). • Rails have infinite front to rear adjustability FEATURES • Frame formed five times for strength • Strong 12 gauge, powder coated "universal cage nut rails" • Frame with two pairs of black powder coated, universal 19 in. M6 mounting rails • Tops can be removed without interfering with cable entry (with RMU markings) and package of M6 hardware; includes two pairs of • Grounding studs on doors, side panels and base unit universal PDU mounting brackets • Provisions for power outlet strips in all four corners • Adjustable levelers, 2.5 in. H, set of four • Listed to UL 60950-1 • One solid top panel • Flexible modular concept • Front and rear mesh contour door with locking easy latch • Easily adapts to equipment upgrades • Pair of solid lift-off side panels with lock and finger release latches • Preassembled to your equipment configuration • Listed to UL 60950-1 Anixter No. Vendor No. Description Anixter No. Vendor No. Description 248804 GL840E-2936P 84 in. H x 29 in. W x 36 in. D, 44 RMU 397914 GL840ES-3048MS 84 in. H x 30 in. W x 48 in. D, 44 RMU, weight capacity 2,000 lb. 248805 GL840E-2932P 84 in. H x 29 in. W x 32 in. D, 44 RMU 397915 GL840ES-2448MS 84 in. H x 24 in. W x 48 in. D, 44 RMU, 248803 GL840E-2436P 84 in. H x 24 in. W x 36 in. D, 44 RMU weight capacity 2,000 lb. 221658 GL840E-2432P 84 in. H x 24 in. W x 32 in. D, 44 RMU 251385 GL840ES-3042MS 84 in. H x 30 in. W x 42 in. D, 44 RMU 248806 GL720E-2936P 72 in. H x 29 in. W x 36 in. D, 37 RMU 267197 GL840ES-2442MS 84 in. H x 24 in. W x 42 in. D, 44 RMU 248807 GL720E-2932P 72 in. H x 29 in. W x 32 in. D, 37 RMU 353420 GL780ES-3042MS 78 in. H x 30 in. W x 42 in. D, 41 RMU, 220562 GL720E-2436P 72 in. H x 24 in. W x 36 in. D, 37 RMU weight capacity 2,000 lb. 248808 GL720E-2432P 72 in. H x 24 in. W x 32 in. D, 37 RMU 375822 GL780ES-2442 78 in. H x 24 in. W x 42 in. D, 41 RMU, 281416 GL600E-2432P 60 in. H x 24 in. W x 32 in. D, 31 RMU weight capacity 2,000 lb. 281415 GL480E-2432P 48 in. H x 24 in. W x 32 in. D, 24 RMU 375821 GL480ES-2442MS 48 in. H x 24 in. W x 42 in. D, 24 RMU, 273179 GL300E-2432P 30 in. H x 24 in. W x 32 in. D, 13 RMU weight capacity 2,000 lb. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.43 Racks, Cabinets and Cable Management Great Lakes Case & Cabinets Co., Inc. Cabinets;Free-standing, Network and Server/17890 Index1.Support and Supplies//Physical Support Structure//Cabinets SIDE AIR BAFFLE KITS EN Enhanced Networking Enclosures Anixter No. Vendor No. Description 444590 ENSAB25 For EN4048 enclosure; for use with GREAT LAKES CASE & CABINET PR34465V2-255180.eps 7018 Cisco switch 444591 ENSAB19 For EN3242 enclosure; for use with 19 RMU Cisco and other side-to-side airflow equipment 444592 ENSAB14 For EN3242 enclosure; for use with 14 RMU Cisco and other side-to-side airflow equipment 444593 ENSAB11 For EN3242 enclosure; for use with 11 RMU Cisco and other side-to-side airflow equipment The Enhanced Networking Enclosures provide cable management and cooling support Cabinets;Accessories/17907 Index1.Support and Supplies//Physical Support Structure//Cabinets for networking and switch applications. A 2,000 lb. weight capacity, large amounts of Power Solutions for Great Lakes Racks and Cabinets open area outside of the rails, repositionable cable fingers and cable knockouts easily accommodate the high-density cable management needs of switches and GREAT LAKES CASE & CABINET PR1764V2-11080.eps patch panels. Standard and optional baffle kits aid in the cooling requirements of side-to-side airflow equipment; kits direct cool air in and exhaust air out. Available in two sizes, the enclosure meets all minimum requirements specified by Cisco. FEATURES • Two sets of 45 RMU, tapped #12-24 rails (M6 also available) • Front rails are fixed and recessed from front of enclosure; rear rails are fully adjustable • Maximum rail spacing of 32 in.; 29 in. on 840ENT3242 • Flexible Mounting Profile (FMP) allows mounting of accessories that do not D interfere with the EIA pattern; three sets of holes on each rail (front, side and Great Lakes offers a large variety of power management products to complete your rear of rail) rack or cabinet system. Please see the Power, Cooling and Environmental Monitoring • Cable management fingers come in 7 RMU sections; six sections (total of section for more information. 42 RMU) are standard on each front and rear rail • Additional cable management finger sections available • Large top and bottom cable knockouts easily accommodate large cable bundles • Solid lift off side panels lock at top • Split mesh doors on front and rear of enclosure (front mesh rear door and split mesh rear door on 840ENT3242); swing handle with keyed lock • Ships completely assembled; no complicated extension kits needed 84 IN. H X 32 IN. W X 42 IN. D, 45 RMU Anixter No. Vendor No. Description 444582 840ENT3242MSS Perforated front door and split perforated rear door, solid sides 444583 840ENT3242MSS-NS Perforated front door and split perforated rear door, sides not included 444584 840ENT3242-FK Doors and sides not included 84 IN. H X 40 IN. W X 48 IN. D, 45 RMU Anixter No. Vendor No. Description 444586 840ENT4048SSS Split perforated front and rear doors, solid sides, includes baffle kit for Cisco 7018 switch 444587 840ENT4048SSS-NS Split perforated front and rear doors, sides not included, includes baffle kit for Cisco 7018 switch 444589 840ENT4048-FK Doors and sides not included, includes baffle kit for Cisco 7018 switch Request the latest literature and guides from Anixter. 4.44 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Great Lakes Case & Cabinets Co., Inc. Cabinets;Wall-mount/2585 Index1.Support and Supplies//Physical Support Structure//Cabinets ACCESSORIES For 19 in. rack mounting. Shelves are black WM Series Wall-mount/Swing-out Cabinets Anixter No. Vendor No. Description GREAT LAKES CASE & CABINET PR1587V2-143853.eps 164872 7206-FM Front-mount shelf: 18 in. deep, 60 lb. weight capacity 131892 7206-EIA EIA spacing shelf: 18 in. deep, 80 lb. weight capacity 131898 7206-SL Sliding shelf: 17.5 in. deep, 40 lb. weight capacity 353430 7206-FR-A18 Four-point shelf: 18 in. deep, 150 lb. weight capacity 300122 7206-14 Stationary shelf: 14 in. deep, 80 lb. weight capacity (recommended The WM Wall-mount/Swing-out cabinets provide 19 in. rack mounting in a distribution for GL2418WM) enclosure. A simple snap latch located inside the cabinet opens the 18 in. deep Cabinets;Wall-mount/10166 Index1.Support and Supplies//Physical Support Structure//Cabinets center swing section for front and rear access. There are also 1 in., 2 in. and 3 in. Wall-mount/Swing-out Enclosures knockouts located on the top, bottom and rear for easy wiring, installation and maintenance. Front and rear sections lock independently for added security. Ships GREAT LAKES CASE & CABINET completely assembled with all accessories installed. WS SERIES PR23699V2-168275.eps FEATURES • Vented side walls • Two pairs of adjustable rails • Full piano hinge • Plexiglass front door (except where noted) • Left- or right-hand swing out • Dust-resistant kit available • Listed to UL 60950-1 WM WALL-MOUNT/SWING-OUT CABINETS Color: black The WS Series of Wall-mount/Swing-out Enclosures provide 19 in. rack mounting in a Anixter No. Vendor No. Description heavy-duty distribution enclosure. With removable sides, interchangeable doors, 248809 GL2418WM 24 in. H x 21.25 in. W x 18 in. D, 12 RMU, optional casters and heavy-duty construction, the WS is the choice for increased weight capacity 150 lb. weight capacities. The WS offers all of the features of a full size enclosure built into a convenient wall-mount. This durable enclosure features a center swing-out section 300121 GL2418WMS 24 in. H x 21.25 in. W x 18 in. D, 12 RMU, for outstanding front and rear access to cable and equipment. A simple finger solid door, weight capacity 150 lb. pull/latch mechanism located inside the enclosure opens the 18.375 in. deep center 200609 GL24WM 24 in. H x 21.25 in. W x 24.5 in. D, swing section. Available in black color. Listed to UL 60950-1. 12 RMU, weight capacity 150 lb. Anixter No. Vendor No. Description 281474 GL24WMS 24 in. H x 21.25 in. W x 24.5 in. D, 267169 GL24WS-SS Solid front door, solid sides, 12 RMU, solid door, weight capacity 24 in. H x 24 in. W x 24 in. D, 11 RMU, 150 lb. weight capacity 250 lb. 200610 GL36WM 36 in. H x 21.25 in. W x 24.5 in. D, 267170 GL24WS-SV Solid front door, vented sides, 2 19 RMU, weight capacity 250 lb. 4 in. H x 24 in. W x 24 in. D, 11 RMU, 216980 GL36WMS 36 in. H x 21.25 in. W x 24.5 in. D, weight capacity 250 lb. 19 RMU, solid door, weight capacity 267171 GL24WS-PS Plexiglass front door, solid sides, 250 lb. 24 in. H x 24 in. W x 24 in. D, 11 RMU, 200611 GL48WM 48 in. H x 21.25 in. W x 24.5 in. D, weight capacity 250 lb. 25 RMU, weight capacity 300 lb. 267172 GL24WS-PV Plexiglass front door, vented sides, 281476 GL48WMS 48 in. H x 21.25 in. W x 24.5 in. D, 24 in. H x 24 in. W x 24 in. D, 11 RMU, 25 RMU, solid door, weight capacity weight capacity 250 lb. 300 lb. 267173 GL36WS-SS Solid front door, solid sides, 36 in. H x 24 in. W x 24 in. D, 18 RMU, weight capacity 300 lb. 267174 GL36WS-SV Solid front door, vented sides, 36 in. H x 24 in. W x 24 in. D, 18 RMU, weight capacity 300 lb. Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.45 Racks, Cabinets and Cable Management Great Lakes Case & Cabinets Co., Inc. WE SERVER SERIES PR20350V2-72959.eps (continued) Wall-mount/Swing-out Enclosures Anixter No. Vendor No. Description 267175 GL36WS-PS Plexiglass front door, solid sides, 36 in. H x 24 in. W x 24 in. D, 18 RMU, weight capacity 300 lb. 267176 GL36WS-PV Plexiglass front door, vented sides, 36 in. H x 24 in. W x 24 in. D, 18 RMU, weight capacity 300 lb. 267177 GL48WS-SS Solid front door, solid sides, 4 8 in. H x 24 in. W x 24 in. D, 25 RMU, weight capacity 350 lb. The WE Server Side Wall Mount is great for applications where a server is required 267179 GL48WS-SV Solid front door, vented sides, and limited space is available. In addition, the side-mount design allows for 48 in. H x 24 in. W x 24 in. D, 25 RMU, ventilation of equipment. Available in black color. Features: Mesh side doors for optimum air flow. Lockable front panel and doors. Optional exhaust fan mounting. weight capacity 350 lb. Three concentric knock-outs on the top, bottom and rear. At 29 in. rail spacing, there 267180 GL48WS-PS Plexiglass front door, solid sides, is 2 in. of space in front and 3 in. in the rear 48 in. H x 24 in. W x 24 in. D, 25 RMU, Anixter No. Vendor No. Description weight capacity 350 lb. 353423 GL24WE 24 in. H x 36.1 in. W x 20.5 in. D, 10 RMU, 267182 GL48WS-PV Plexiglass front door, vented sides, weight capacity 350 lb. 48 in. H x 24 in. W x 24 in. D, 25 RMU, 191088 7217WS Fan assembly with fan guards and two weight capacity 350 lb. 75 cfm fans WD SERIES PR23696V2-168264.eps 131905 7219 Six position power strip for 19 in. mounting; 5-15R receptacle and 5-15P plug 353424 7219-20AR Six position power strip for 19 in. mounting; 5-20R receptacle and D 5-20P plug 331739 7219-SR14 Fourteen (six front/eight back) position power strip for 19 in. mounting; 5-15R receptacle and 5-15P plug 15WM WALL-MOUNT PR23674V2-167916.eps The WD series offers a number of 32 in. deep configurations ranging from 24 in. to 36 in. in height, offering 11, 18 or 25 rack mounted units (RMU) of space. Each enclosure is 24 in. wide and each comes configured with a plexiglass door. A simple finger pull/latch mechanism located inside the enclosure opens the 25.75 in. deep center swing section. The two pairs of #12-24 mounting rails are fully adjustable. The unique hinge system allows for removal of the rear section for easy installation. Casters are also available to make the WD free-standing as well as to be able to hold extra weight. Anixter No. Vendor No. Description 332125 GL24WD 24 in. H x 24 in. W x 32.13 in. D, 11 RMU, plexiglass door, weight capacity 250 lb. The 15WM is a 15 in. H wall-mount with a pair of tapped, #10-32, 7 RMU rails. This 332127 GL24WDS 24 in. H x 24 in. W x 32.13 in. D, 11 RMU, unique enclosure is designed to be ideal for housing smaller intercom, paging and solid door, weight capacity 250 lb. security systems. The plexiglass option allows for visual verification of equipment 332128 GL36WD 36 in. H x 24 in. W x 32.13 in. D, 18 RMU, and one-person installation makes the 15WM a convenient solution for any customer, from the owner of a local retail store, to a general or electrical contractor, plexiglass door, weight capacity 300 lb. to the office manager at a school. A reversible main body, conduit knock-outs of 332129 GL36WDS 36 in. H x 24 in. W x 32.13 in. D, 18 RMU, various sizes and space for mounting a PDU are just some of the features which solid door, weight capacity 300 lb. create convenience for the user. Tamper-resistant screws and bits externally secure 332130 GL48WD 48 in. H x 24 in. W x 32.13 in. D, 25 RMU, sections together. plexiglass door, weight capacity 350 lb. Anixter No. Vendor No. Description 332131 GL48WDS 48 in. H x 24 in. W x 32.13 in. D, 18 RMU, 397926 BS2-15WM 15.38 in. H x 22.25 in. W x 17.66 in. D, solid door, weight capacity 350 lb. 7 RMU, plexiglass door, weight capacity 332132 DK1 Dust-resistant kit contains four cover 100 lb. plates, four fan filters and hardware 397927 BS2-15WMS 15.38 in. H x 22.25 in. W x 17.66 in. D, 332133 FFK1 Four fan filters 7 RMU, solid door, weight capacity 100 lb. Request the latest literature and guides from Anixter. 4.46 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Great Lakes Case & Cabinets Co., Inc. Racks;Two-post/2262 Racks;Four-post/17886 Index1.Support and Supplies//Physical Support Structure//Racks Index1.Support and Supplies//Physical Support Structure//Racks Two-post Racks Four-post Racks GREAT LAKES CASE & CABINET PR22484V2-133055.eps GREAT LAKES CASE & CABINET PR34499V2-255250.eps Great Lakes 19 in. relay racks are designed to easily support the mounting of data, telecommunications, networking and electrical equipment. Great Lakes four-post racks are designed to easily support the mounting of data, telecommunications, networking and electrical equipment. FEATURES • 19 in. EIA-310-D-compliant mounting FEATURES • #12-24 tapped holes • 19 in. EIA-310-D-compliant mounting • Constructed from double-sided, extruded aluminum • Made from cold rolled steel and extruded aluminum • Available in a mill finish or black anodized finish • Cable management accessories and shelves create a complete solution • Cable management accessories and shelves create a complete solution #12-24 MOUNTING MILL FINISH Weight capacity: 1,000 lb. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 444536 GLRR-1936 36 in. H x 20.31 in. W x 14 in. D, 18 RMU 444551 4P1224-24 84 in. H x 20.6 in. W x 24 in. D, 45 RMU 444538 GLRR-1948 48 in. H x 20.31 in. W x 14 in. D, 24 RMU 444552 4P1224-29 84 in. H x 20.6 in. W x 29 in. D, 45 RMU 444540 GLRR-1960 60 in. H x 20.31 in. W x 14 in. D, 31 RMU 444553 4P1224-32 84 in. H x 20.6 in. W x 32 in. D, 45 RMU 444542 GLRR-1966 66 in. H x 20.31 in. W x 14 in. D, 35 RMU 444554 4P1224-36 84 in. H x 20.6 in. W x 36 in. D, 45 RMU 444544 GLRR-1972 72 in. H x 20.31 in. W x 14 in. D, 38 RMU M6 MOUNTING 214219 GLRR-1984 84 in. H x 20.31 in. W x 14 in. D, 45 RMU Weight capacity: 1,000 lb. 444546 GLRR-1996 96 in. H x 20.31 in. W x 14 in. D, 52 RMU Anixter No. Vendor No. Description 444548 GLRR-19108 108 in. H x 20.31 in. W x 14 in. D, 59 RMU 444555 4PM6-24 84 in. H x 20.6 in. W x 24 in. D, 45 RMU BLACK ADONIZED FINISH 444556 4PM6-29 84 in. H x 20.6 in. W x 29 in. D, 45 RMU Anixter No. Vendor No. Description 444557 4PM6-32 84 in. H x 20.6 in. W x 32 in. D, 45 RMU 444537 GLRR-1936BA 36 in. H x 20.31 in. W x 14 in. D, 18 RMU 444558 4PM6-36 84 in. H x 20.6 in. W x 36 in. D, 45 RMU 444539 GLRR-1948BA 48 in. H x 20.31 in. W x 14 in. D, 24 RMU HEAVY-DUTY 444541 GLRR-1960BA 60 in. H x 20.31 in. W x 14 in. D, 31 RMU Weight capacity: 2,000 lb. when bolted to the floor 444543 GLRR-1966BA 66 in. H x 20.31 in. W x 14 in. D, 35 RMU Anixter No. Vendor No. Description 444545 GLRR-1972BA 72 in. H x 20.31 in. W x 14 in. D, 38 RMU 444550 4PHD29 80.5 in. H x 50.6 in. W x 29 in. D, 42 RMU 267194 GLRR-1984BA 84 in. H x 20.31 in. W x 14 in. D, 45 RMU 444547 GLRR-1996BA 96 in. H x 20.31 in. W x 14 in. D, 52 RMU 444549 GLRR-19108BA 108 in. H x 20.31 in. W x 14 in. D, 59 RMU ACCESSORIES Anixter No. Vendor No. Description 267195 1984ST09 Single-sided shelf, 9 in. deep, 75 lb. weight capacity 267196 1984ST15 Single-sided shelf, 15 in. deep, 75 lb. weight capacity 397929 1984KM Keyboard shelf with pivoting mouse tray, 19 in. W x 8 in. D, 35 lb. weight capacity 444563 1984LR Ladder Rack Support Brackets, mounts either parallel or perpendicular to rack; supports 12 to 18 in. wide ladder rack 444564 GL-RMUTA Package of four RMU labels in ascending order (1U on the bottom, 45U on the top) Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.47 Racks, Cabinets and Cable Management Great Lakes Case & Cabinets Co., Inc. Racks;Wall-mount/10169 Index1.Support and Supplies//Physical Support Structure//Racks Anixter No. Vendor No. Description SR Wall-mount Swing Racks 267189 7206-FR-A28HD 17.5 in. W x 28 in. D, 300 lb. weight capacity GREAT LAKES CASE & CABINET PR6824V2-11095.eps 267192 7206-FR-A32HD 17.5 in. W x 32 in. D, 300 lb. weight capacity 353430 7206-FR-A18 Four-point shelf: 18 in. deep, 150 lb. weight capacity Shelves;Cabinet Shelves/2366 Index1.Support and Supplies//Physical Support Structure//Accessories Sliding Shelves GREAT LAKES CASE & CABINET PR12065V2-21907.eps The SR Wall-mount Swing Rack is a very popular and economical solution for mounting patch panels and switches. Available in three heights and with a weight capacity of 100 lb., the swing frame provides easy access to the back of the equipment. FEATURES • 19 in. EIA-310-D-compliant with #12 to 24 threaded holes and hardware • "Stay Open" hinge pins • Provisions for optional cable management cinch straps • 180° positive stop Listed to UL 60950-1. All shelves below are vented and come in black. • Minimal assembly required • Listed to UL 60950-1 Anixter No. Vendor No. Description 214213 7206-FRSL-AHD 17.5 in. W x 22 in. D, 110 lb. Anixter No. Vendor No. Description weight capacity 222906 GL24SR 23.75 in. H x 20.75 in. W x 18 in. D, 214214 7206-FRSL-ADHD 17.5 in. W x 26 in. D, 110 lb. 12 RMU, weight capacity 100 lb. D weight capacity 397930 GL24SRD 23.75 in. H x 20.75 in. W x 22 in. D, 12 RMU, weight capacity 100 lb. Shelves;Monitor, Keyboard, Mouse/2265 Index1.Support and Supplies//Physical Support Structure//Accessories 267186 GL36SR 36.00 in. H x 20.75 in. W x 18 in. D, Monitor/Keyboard/Mouse Shelf 19 RMU, weight capacity 100 lb. GREAT LAKES CASE & CABINET PR12066V2-21910.eps 397931 GL36SRD 36.00 in. H x 20.75 in. W x 22 in. D, 19 RMU, weight capacity 100 lb. 267187 GL48SR 48.76 in. H x 20.75 in. W x 18 in. D, 26 RMU, weight capacity 100 lb. 397932 GL48SRD 48.76 in. H x 20.75 in. W x 22 in. D, 26 RMU, weight capacity 100 lb. Shelves;Cabinet Shelves/2264 Index1.Support and Supplies//Physical Support Structure//Accessories Stationary Shelves GREAT LAKES CASE & CABINET PR12064V2-21904.eps FEATURES • 19 in. rack-mount • Front-to-rear adjustable mounting tabs • Minimal 2 RMU mounting height • 200 lb. weight capacity • Listed to UL 60950-1 • Keyboard and mouse are not included with shelf All shelves below are vented and come in black. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 332134 7206-MKM Monitor space: 17 in. W x 24 in. D, 214162 7206-FR-AHD 17.5 in. W x 22.25 in. D, 200 lb. keyboard tray: 19.13 in. W x 7.88 in. D x weight capacity 1.75 in. H, mouse surface: 8 in. x 214163 7206-FR-ADHD 17.5 in. W x 27.25 in. D, 150 lb. 9 in., black weight capacity Request the latest literature and guides from Anixter. 4.48 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Great Lakes Case & Cabinets Co., Inc. Shelves;Monitor, Keyboard, Mouse/16405 Index1.Support and Supplies//Physical Support Structure//Accessories CABLE ORGANIZERS 19 IN. MOUNTING PR23682V2-168255.eps Keyboard and Mouse Shelf for Two- and Four-post Racks GREAT LAKES CASE & CABINET PR23675V2-167919.eps Color: black Anixter No. Vendor No. Description 267201 CM-02 Low-density front organizer, 1.8 in. W x FEATURES 3.8 in. D (inside dimensions) • 19 in. mounting for Great Lakes two- and four-post racks 267202 CM-04 Interbay organizer with four horizontal • Swivel mouse platform can be mounted for left or right hand use rings, 3.25 in. W x 2.8 in. D • Capable of being mounted at any height for comfortable use (inside dimensions) Anixter No. Vendor No. Description 215648 CM-05 Single-sided organizer with five horizontal 397929 1984KM Keyboard shelf with pivoting mouse tray, rings, 1.3 in. W x 1.8 in. D 19 in. W x 8 in. D, 35 lb. weight capacity (inside dimensions) 353439 CM-07 Waterfall cable management trough, Cable Management;Vertical and Horizontal/10170 Index1.Support and Supplies//Physical Support Structure//Accessories 1 RMU Cable Management 246767 CM-08 Standard front organizer with four GREAT LAKES CASE & CABINET horizontal rings, 1.75 in. W x 3.75 in. D (inside dimensions) CABLE RINGS PR23683V2-168295.eps 267203 CM-09 Two-sided organizer with four front rings (1.3 in. W x 2.3 in. D) and five rear rings (1.3 in. W x 1.8 in. D) STRAIN RELIEF BARS PR23692V2-168281.eps Color: black Color: black Anixter No. Vendor No. Description Anixter No. Vendor No. Description 267198 CM-13 Single cable ring, 1.06 in. W X 267207 CM-03 Back side cable organizer 2.8 in. D (inside dimensions) 267209 CM-19 19 in. utility strain relief bar 267199 CM-44 4 in. auxiliary ring, 3.8 in. W X 267210 19SRB 19 in. cable strain relief bar 3.8 in. D (inside dimensions) 267211 23SRB 23 in. cable strain relief bar 267200 CM-425 Heavy-duty cable ring, 2.3 in. W X CABLE MANAGEMENT PANELS PR23681V2-167903.eps 3.8 in. D (inside dimensions) Anixter No. Vendor No. Description 218683 CM-10 19 in. horizontal panel with ten slots, .25 in. x .2 in. Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.49 Racks, Cabinets and Cable Management Great Lakes Case & Cabinets Co., Inc. (continued) Cable Management Anixter No. Vendor No. Description 444596 VCM5-FR Vertical front and rear cable organizer, CINCH STRAPS PR23684V2-168251.eps 5 in. x 80 in. L channel, includes black snap-on cover 444598 VCM5-FO Vertical front cable organizer, 5 in. x 80 in. L channel, includes black snap-on cover CABLE RETAINERS PR34469V2-255171.eps Anixter No. Vendor No. Description 218682 CM-01 12 in. L x 3/4 in. W with buckle and grommet, blue 218681 CM-06 6 in. L x 3/4 in. W with buckle and grommet, black Cable Management;Vertical and Horizontal/17892 Index1.Support and Supplies//Physical Support Structure//Accessories 19 in. mounting. Includes clips to create proper bend radius Cable Management for Two- and Four-post Racks Anixter No. Vendor No. Description 444599 VCM8-WR For 8 in. channel, pack of six GREAT LAKES CASE & CABINET PR34470V2-255164.eps 444600 VCM5-CR For 5 in. channel, pack of 10 CABLE SPOOLS AND SLACK LOOP ORGANIZERS PR34468V2-255168.eps D When used with Great Lakes two- and four-post racks, cable management accessories create a complete network solution. Vertical managers are able to handle large cable bundles and repositionable accessories, such as cable spools, are easy to Stores slack cables. Cable spool pictured install, adjust and remove based on current and future needs. Anixter No. Vendor No. Description FEATURES 444601 VCM8-SL Cable spool for 8 in. channel only, pack • Vertical channels available as a single channel or front/rear channel of two • 8 in. channels hold up to 384 Cat 6 cables or 738 Cat 5e cables 444602 VCM5-SL Slack loop organizer for 5 in. channel • 5 in. channels hold up to 126 Cat 6 cables or 246 Cat 5e cables only, pack of two • Large fingers align with RMU openings HORIZONTAL CABLE ORGANIZERS PR34467V2-255176.eps VERTICAL CABLE ORGANIZERS Anixter No. Vendor No. Description 444594 VCM8-FR Vertical front and rear cable organizer, 8 in. x 80 in. L channel, includes two spools, two wire retainers and black hinge cover 444595 VCM8-FO Vertical front cable organizer, 8 in. x 80 in. L channel, includes one spool, one wire retainer and black hinge cover 19 in. mounting. Includes clips to create proper bend radius Anixter No. Vendor No. Description 444603 CM-16 1 RMU, includes cover 444604 CM-17 2 RMU, includes cover Request the latest literature and guides from Anixter. 4.50 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Hoffman ./Cabinets;Free-standing, Server/16397 Cabinets;Free-standing, Network/16399 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets PROLINE Server Cabinets PROLINE Communications Cabinets HOFFMAN PR23703V2-168562.eps HOFFMAN PR23702V2-168571.eps Hoffman server cabinets are designed to balance the thermal load of your equipment, Hoffman PROLINE Communications Cabinets are available in standard configurations ensuring optimum performance and service life. From standard passive cooling to meet the essential protection needs for rack-mounted voice/data, switch and features that inherently dissipate heat, to active, ducted and air conditioned patch equipment. Extra wide design easily accommodates high-density cable patch solutions that maintain proper operational temperatures in cords and equipment. Full-height cable managers are included in the front and rear high-density environments. for maximizing cable capacity. FEATURES FEATURES • Dedicated solutions for colocation, voice/data, hot/cold aisle, liquid cooled, • ConnecTek Cabinets are available in 27 in. and 32 in. widths to accommodate and NEMA-rated applications high-density cables, patch cords and equipment • Modular server cabinet platforms offering a wide variety of sizes, • Large gland plate in top allows easy routing of cable, preterminated cables and configurations, and versatility patch panels • Passive and active cooling configurations with a wide array of modifications and • Perforated top, front door, and rear door allow for maximum ventilation co-development solutions • Network Switch Cabinet models available to optimize ventilation requirements • High-density solutions include top-ducted cabinets and VARISTAR cabinets with for all Cisco series switches air/water heat exchangers • Front and rear vertical cable managers included for handling large cable bundles Anixter No. Vendor No. Description Anixter No. Vendor No. Description 382185 PSCPC20610B Passive cooling, 78 in. H x 24 in. W x 43 in. D, 42RU, perforated front door, 397869 PNC20710B ConnecTek, 79 in. H x 28 in. W x 41 in. D, perforated rear door, black 42RU, perforated front door, perforated split rear door, black 397853 PSCHCA20610B Hot aisle/cold aisle, 78 in. H x 24 in. W x 43 in. D, 42RU, perforated front door, rear 397870 PNC20710BNS ConnecTek, 79 in. H x 28 in. W x 41 in. D, fan door, black 42RU, perforated front door, perforated split rear door, black, no sides 397855 PSFD20610B Floor ducted, 82 in. H x 24 in. W x 43 in. D, 42RU, window front door, rear fan 397871 PNC20810B ConnecTek, 79 in. H x 32 in. W x 41 in. D, door, black 42RU, perforated front door, perforated split rear door, black 397858 PSTD20610BM Top ducted, 78 in. H x 24 in. W x 43 in. D, 42RU, perforated front door, solid rear 397872 PNC20810BNS ConnecTek, 79 in. H x 32 in. W x 41 in. D, door, black (height dimension 42RU, perforated front door, perforated excludes duct) split rear door, black, no sides 397861 DV218012LX2 VARISTAR liquid cooled, 82 in. H x 32 in. W 397873 PNS20810B Network Switch Cabinet, 79 in. H x 32 in. x 47 in. D, 42RU, window front door, solid W x 41 in. D, 42RU, perforated front door, rear door, black, includes air/water perforated split rear door, black heat exchanger 397874 PNS20810BNS Network Switch Cabinet, 79 in. H x 32 in. W x 41 in. D, 42RU, perforated front door, More sizes and configurations are available. Contact your local sales perforated split rear door, black, no sides representative for information. More sizes and configurations are available. Contact your local sales representative for ordering information. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.51 Racks, Cabinets and Cable Management Hoffman Racks;Two- and Four-post/16400 Cable Management;Vertical and Horizontal/16401 Index1.Support and Supplies//Physical Support Structure//Racks Index1.Support and Supplies//Physical Support Structure//Accessories Open Frame Racks and Accessories CABLETEK Horizontal and Vertical Cable Manager System HOFFMAN HOFFMAN Hoffman Open Frame Racks are key elements in structured cabling systems and are Hoffman CABLETEK Horizontal and Vertical Cable Manager Systems provide support, well suited for networking and data transmission applications. Customize your protection and accessibility to network cables and patch cords. CABLETEK is designed installation with a full offering of shelves, hardware and cable management. to speed installation and provide flexibility to adapt to changing cabling demands. FEATURES OPEN FRAME RACKS PR23706V2-168550.eps • HORIZONTAL: -High cable capacity channel and supporting fingers facilitate proper bend radius of cables -Arrowhead supporting fingers provide easy installation and removal of cables -Easy "snap-in-place" assembly allows for quick installation -Included covers are easily removable, provide protection and aesthetics, and stay open to provide unobstructed access -Rugged composite construction • VERTICAL: -Arrowhead fingers provide support, easy access and high capacity to network Anixter No. Vendor No. Description cables and patch cords -Rear posts and gates provide proper bend allowance, containment and full 271801 EDR19FM45U Two-post Open Frame Rack, 19 in. W x access to network cables and bundles 45U, aluminum, black -Extra deep front channel and open, easy access rear surface provides high 314578 E4DR19FM45U Four-post Open Frame Rack, 19 in. W x cable capacity and smooth transition to equipment 45U, aluminum, black, tapped #12-24 -Included cover is easy to remove and hinges 180° to the left and right to 314580 E4DRS19FM45U Four-post Open Frame Rack, 19 in. W x provide complete access to cables 45U, aluminum, black, square hole -Also available for 8- and 9-foot Open Frame Racks ACCESSORIES PR23708V2-168565.eps D HORIZONTAL PR23705V2-168553.eps Anixter No. Vendor No. Description Anixter No. Vendor No. Description 271805 ESH19V Single-sided vented shelf, fits 19 in. 397877 DCHS1 19 in., 1RU, single-sided, equipment, steel, black black composite 271804 ESHD19 Double-sided shelf, fits 19 in. equipment, 364860 DCHS2 19 in., 2RU, single-sided, steel, black black composite 319156 ESH19KBM Keyboard monitor shelf, fits 19 in. 363701 DCHD2 19 in., 2RU, double-sided, equipment, steel, black black composite 397875 P19SHP68B Sliding shelf, fits 19 in. equipment, 397878 DCHB1 19 in., tie down bar, steel, black steel, black 317539 EJ2DR Joining kit for Open Frame Racks 278528 ES1224B Screw package, qty. 20, #12-24, steel, black Request the latest literature and guides from Anixter. 4.52 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Hoffman VERTICAL PR23707V2-168568.eps • Vented sides provide cross flow ventilation to improve heat dissipation • RAL 9005 black light-textured, low-gloss polyester powder paint Anixter No. Vendor No. Description 394585 EWMW242418 ACCESSPLUS II, window door, 24 in. H x 24 in. W x 18 in. D, 12RU 394586 EWMW362418 ACCESSPLUS II, window door, 36 in. H x 24 in. W x 18 in. D, 19RU 394587 EWMW482418 ACCESSPLUS II, window door, 48 in. H x 24 in. W x 18 in. D, 26RU 390048 EWMW242425 ACCESSPLUS II, window door, 24 in. H x 24 in. W x 25 in. D, 12RU Anixter No. Vendor No. Description 390051 EWMW362425 ACCESSPLUS II, window door, 36 in. H x 376985 DV6S7 7 ft H x 6 in. W, single-sided, aluminum 24 in. W x 25 in. D, 19RU and composite 390053 EWMW482425 ACCESSPLUS II, window door, 48 in. H x 363700 DV6D7 7 ft H x 6 in. W, double-sided, aluminum 24 in. W x 25 in. D, 26RU and composite 394588 EWMS242418 ACCESSPLUS II, solid door, 24 in. H x 24 in. 397879 DV10S7 7 ft H x 10 in. W, single-sided, aluminum W x 18 in. D, 12RU and composite 394589 EWMS362418 ACCESSPLUS II, solid door, 36 in. H x 24 in. 397880 DV10D7 7 ft H x 10 in. W, double-sided, aluminum W x 18 in. D, 19RU and composite 394590 EWMS482418 ACCESSPLUS II, solid door, 48 in. H x 24 in. 397881 DV12S7 7 ft H x 12 in. W, single-sided, aluminum W x 18 in. D, 26RU and composite 394591 EWMS242425 ACCESSPLUS II, solid door, 24 in. H x 24 in. 397882 DV10D7 7 ft H x 12 in. W, double-sided, aluminum W x 25 in. D, 12RU and composite 394592 EWMS362425 ACCESSPLUS II, solid door, 36 in. H x 24 in. Enclosures;Security and Commercial/16100 W x 25 in. D, 19RU Index1.Support and Supplies//Physical Support Structure//Cabinets 394593 EWMS482425 ACCESSPLUS II, solid door, 48 in. H x 24 in. ACCESSPLUS II Type 1 Double-hinged Wall-mount Cabinets W x 25 in. D, 26RU HOFFMAN PR23342V2-163392.eps More sizes and configurations available. For more information contact your sales representative. Enclosures;Security and Commercial/15005 Index1.Support and Supplies//Physical Support Structure//Cabinets PROTEK DH Type 4 and Type 12 Double-hinged Wall-mount Cabinet HOFFMAN This Hoffman double-hinged wall-mounted cabinet is ideal for protecting 19 in. network equipment from falling dirt, splashing water, dust and other contaminants. This versatile cabinet mounts to a wall or can be pole-mounted with the optional pole-mounting kit. Designed to hold multiple pieces of voice/data equipment ACCESSPLUS II Cabinets provide security, equipment access, cooling and support for comfortably, it can be mounted to be left- or right-hinged and comes completely network and other 19 in. rack-mount equipment. The cabinet has three components: assembled and ready to mount. front door, center section and wall section. Double-hinged for easy equipment access; center section provides 19 in. rack mounting per EIA universal spacing and is FEATURES accessed through the front door or swing the center section away from the wall • Industry standard: NEMA/EEMAC Type 4 or 12 section for rear access. • Solid door provides complete physical and visual protection FEATURES • Window door, made with scratch-resistant safety glass, allows equipment monitoring without opening the door • Industry standard: NEMA Type 1 • Double-hinged for easy equipment access • Front door has either a solid steel or hardened, tinted safety-glass window door • Foam-in-place seamless gasket around door seals against outdoor air for superior scratch resistance infiltration and is non-absorbing and chemical resistant • Center section easily removed from rear section; tool-less one-person • Type 12 cabinets have solid or window doors and a locking wing knob with two installation possible keys. They provide security and convenience in indoor applications • Self-locking center-to-wall section latches in two locations • Type 4 cabinets have solid doors and a padlock capable 1/4-turn latch. They • Front access to all latches (no exposed side latches); cabinet can be installed provide easy operation and locking options in indoor and outdoor applications tightly in corners • One set of adjustable tapped 19 in. rack angles included • RAL 7035 light gray textured, low-gloss polyester powder paint Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.53 Racks, Cabinets and Cable Management Hoffman PROTEK DH AC PACKAGE PR23344V2-163397.eps (continued) PROTEK DH Type 4 and Type 12 Double-hinged Wall-mount Cabinet PROTEK DH WALL-MOUNT CABINETS PR21446V2-119588.eps PROTEK Air Conditioner Packages provide cool air to internal equipment when high ambient air temperatures exist (up to 130°F). AC packages include an 800 Btu indoor/outdoor air conditioner that operates on 115 V AC with 5-15P plug. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 394618 PTDHW242429GA PROTEK AC package, Type 12, window 366701 PTDHW162415G PROTEK, Type 12, window door, 16 in. H x door, 24 in. H x 24 in. W x 29 in. D, 12RU 24 in. W x 15 in. D, 7RU 394619 PTDHW362429GA PROTEK AC package, Type 12, window 366702 PTDHW202415G PROTEK, Type 12, window door, 20 in. H x door, 36 in. H x 24 in. W x 29 in. D, 19RU 24 in. W x 15 in. D, 10RU 394620 PTDHW482429GA PROTEK AC package, Type 12, window 366703 PTDHW242415G PROTEK, Type 12, window door, 24 in. H x door, 48 in. H x 24 in. W x 29 in. D, 26RU 24 in. W x 15 in. D, 12RU 394621 PTDHS242429GA4 PROTEK AC package, Type 4, solid door, 366704 PTDHW242424G PROTEK, Type 12, window door, 24 in. H x 24 in. H x 24 in. W x 29 in. D, 12RU 24 in. W x 24 in. D, 12RU 394623 PTDHS362429GA4 PROTEK AC package, Type 4, solid door, 366705 PTDHW362415G PROTEK, Type 12, window door, 36 in. H x 36 in. H x 24 in. W x 29 in. D, 19RU 24 in. W x 15 in. D, 19RU 394624 PTDHS482429GA4 PROTEK AC package, Type 4, solid door, 366706 PTDHW362424G PROTEK, Type 12, window door, 36 in. H x 48 in. H x 24 in. W x 29 in. D, 26RU 24 in. W x 24 in. D, 19RU D 366707 PTDHW482415G PROTEK, Type 12, window door, 48 in. H x More sizes and configurations available. For more information 24 in. W x 15 in. D, 26RU contact your sales representative. 331734 PTDHW482424G PROTEK, Type 12, window door, 48 in. H x 24 in. W x 24 in. D, 26RU 366709 PTDHS242424G PROTEK, Type 12, solid door, 24 in. H x 24 in. W x 24 in. D, 12RU 366710 PTDHS362424G PROTEK, Type 12, solid door, 36 in. H x 24 in. W x 24 in. D, 19RU 366711 PTDHS482424G PROTEK, Type 12, solid door, 48 in. H x 24 in. W x 24 in. D, 26RU 366712 PTDHS242424G4 PROTEK, Type 4, solid door, 24 in. H x 24 in. W x 24 in. D, 12RU 366713 PTDHS362424G4 PROTEK, Type 4, solid door, 36 in. H x 24 in. W x 24 in. D, 19RU 366714 PTDHS482424G4 PROTEK, Type 4, solid door, 48 in. H x 24 in. W x 24 in. D, 26RU Request the latest literature and guides from Anixter. 4.54 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Knurr ./Cabinets;Free-standing, Network and Server/16304 Index1.Support and Supplies//Physical Support Structure//Cabinets Knurr DCM Quick Ship Racks KNURR EMERSON NETWORK POWER Knurr DCM Quick Ship Racks provide the convenience of 19 in. racks with high-end features and standardized options to provide fast customization for individual site needs. The racks are designed for optimized air flow and maximized useful mounting space. These racks ship within 72 hours. FEATURES • Ships within 72 hours, delivered as a fully assembled cabinet • Tool-less cable management enables components to be mounted in any internal frame surface, on the outside edge of the 19 in. rail, or on the PDU/Cable Management rail • Perforated doors provide 83 percent open area, the highest in the industry, for improved airflow • Rugged aluminum frame is lighter than a comparable steel frame • Low-profile casters enable cabinet to roll through standard doorways Anixter No. Vendor No. Description 443686 D4224442 42U x 24 in. W x 44 in. D with side panels 443687 D4224440 42U x 24 in. W x 44 in. D no side panels 443688 D4232442 42U x 32 in. W x 44 in. D with side panels 443689 D4232440 42U x 32 in. W x 44 in. D no side panels CABINET ACCESSORIES Anixter No. Vendor No. Description 397015 002185000 Fixed tool-less shelf 397016 002185050 (10) tool-less lobster claw cable management 397013 002185060 (10) tool-less hook and latch cable management 443690 002185070 Cable management lobster claw (100) 443692 002185080 Cable management velcro ring (100) 397029 035351081 24 outlet PDU with 5-20R receptacles, 30 A L5-30P input, 10 ft. cord, vertical mount 443694 539608G2 Tool-less baying kit for 42U cabinets Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.55 Racks, Cabinets and Cable Management Ortronics ./Cabinets;Free-standing, Network and Server/16535 Cabinets;Free-standing, Server/17610 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets Mighty Mo Cabinets Pre-configured Server Cabinets ORTRONICS PR24124V2-175092.eps ORTRONICS PR29321V2-217529.eps A solid foundation is critical for superior network performance in high-density All pre-configured server cabinet versions include: applications. Ortronics' Mighty Mo cabinet is designed around industry-leading cable -Heavy-duty 14 GA welded steel frame configured with cable opening at bottom rear management systems that address the high-density requirements in the data center -Frame levelers and SAN environments of today and the future. In addition, the Mighty Mo cabinet is -Two pairs of RU labeled mounting rails with 3/8 in. square holes ideal for maintaining cold aisle/hot aisle airflow. Side rails work with an innovative -Full profile mesh locking front door baffle system that redirects airflow from side venting equipment from the hot aisle to -Split flat mesh locking rear door the cold aisle to maintain maximum airflow. -Two "L" shaped finger managers on rear rails FEATURES -Vertical PDU mount and lacing bar • Capacity: 2,000 lb. static frame load capacity P Per erf fo or rm ma an nc ce e a an nd d P Pr ro ot te ec ct tiio on n -Divider or side panels as stated below P Per erf fo or rm ma an nc ce e a an nd d P Pr ro ot te ec ct tiio on n • To ensure maximum network performance, Mighty Mo cable management -Solid top panel in front systems protect patch cords, cables and equipment ports from damage by: -Cable entry top panel in rear -Maintaining proper bend radius requirements -Rack unit cage nuts #12-24 thread (package of 50) D -Reducing tension on plugs and jacks -Two packages of 50 panel mounting screws #12-24 (total of 100) -Protecting network equipment ports -Additional adhesive rack unit labels (mounted inside of rear set of rails) -Supporting large cable bundles within the rack C Ca ab blle e M Ma an na ag gem eme en nt t C Ca ab blle e M Ma an na ag gem eme en nt t Divider versions have a right side divider panel and ganging hardware (for within row). • Support for up to 1,340 Cat 6 ports Side panel versions have a set of end panels (for standalone for to create ends of row). • Vertical managers provide ample capacity for a minimum of 48 Category 6A Depth includes doors. patch cords per rack unit on a single side of the equipment Anixter No. Vendor No. Description - Version • Mounting rails adjust from 12.5 in. to 30 in., independent of the wide rail in 426095 MMC422440-00005 42RU x 24 in. W x 42 in. D, divider front on either side to handle and route copper (Cat 6A, 6, and 5e) or fiber 426097 MMC422440-00006 42RU x 24 in. W x 42 in. D, side panel distribution cables without impeding airflow while protecting proper bend 426098 MMC422446-00002 42RU x 24 in. W x 48 in. D, divider radius requirements 426099 MMC422446-00003 42RU x 24 in. W x 48 in. D, side panel A Aiir rf fllo ow w A Aiir rf fllo ow w 426100 MMC472440-00003 47RU x 24 in. W x 42 in. D, divider • The Mighty Mo Cabinet is ideal for maintaining cold aisle/hot aisle airflow, 426101 MMC472440-00004 47RU x 24 in. W x 42 in. D, side panel whether your network equipment is front-to-back, bottom or side venting 426102 MMC472446-00001 47RU x 24 in. W x 48 in. D, divider • Side rails work with an innovative baffle system that redirects airflow from side venting equipment from the hot aisle to the cold aisle to maintain 426103 MMC472446-00002 47RU x 24 in. W x 48 in. D, side panel maximum airflow 426104 MMC423240-0000G 42RU x 32 in. W x 42 in. D, divider • This passive cooling system can help eliminate the extra heat generated by and 426106 MMC423240-0000H 42RU x 32 in. W x 42 in. D, side panel power required for typical switch fans 426107 MMC423246-00007 42RU x 32 in. W x 48 in. D, divider P Po ow wer er P Po ow wer er 426109 MMC423246-00008 42RU x 32 in. W x 48 in. D, side panel • Full size power distribution units (PDUs) are mountable on Mighty Mo wide back 426110 MMC473240-00003 47RU x 32 in. W x 42 in. D, divider rails, with the switch already mounted, to bring additional power to your 426111 MMC473240-00004 47RU x 32 in. W x 42 in. D, side panel server rack 426112 MMC473246-00001 47RU x 32 in. W x 48 in. D, divider The Mighty Mo cabinet line includes a complete array of accessories to 426113 MMC473246-00002 47RU x 32 in. W x 48 in. D, side panel create customized solutions for a wide variety of network and data center configurations. Please consult your local sales representative to create your unique cabinet part number. Request the latest literature and guides from Anixter. 4.56 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Ortronics Cabinets;Free-standing, Network/17611 Cabinets;Wall-mount/17561 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets Pre-configured Network Cabinets Mighty Mo Wall Mount Cabinets ORTRONICS PR29315V2-217394.eps ORTRONICS PR29319V2-217524.eps All pre-configured network cabinet versions include: The Mighty Mo Wall Mount Cabinets utilize advanced cable management to help secure, support and organize your network where floor space is limited. Providing -Heavy-duty 14 GA welded steel frame configured with cable opening at bottom front capacity for both active and passive equipment, the cabinets feature one rack unit -Frame levelers finger style vertical managers to ensure proper cable management for maximum -Two pairs of RU labeled mounting rails with #12-24 tapped holes network performance. An optional rear horizontal-mount bracket kit is designed to -Full profile plexiglass locking front door provide two additional fixed rack units on the rear wall for mounting fiber, equipment -Full flat solid locking rear door or power distribution units. In addition, the cabinet center section swings out from the wall to provide easy access to the equipment. -Two "L" shaped finger managers on front rails The front lockable wing turn latch allows you to secure the front door without having -Right and left locking side panels to lock the cabinet. This feature allows for easy access into the front of the cabinet -Fan top panel in front when you are in a secure environment. -Cable entry top panel in rear The Mighty Mo Wall Mount Cabinets are also an ideal choice for mounting in an open -Package of 50 panel mounting screws #12-24 office environment. The cabinet's heavy-duty construction minimizes sagging under Depth includes doors. heavy loads and the optional 50 cfm fan is 50 percent quieter than most other Anixter No. Vendor No. Description leading cabinets. 426115 MMC422434-00004 42RU x 24 in. W x 36 in. D FEATURES 426116 MMC423234-0000A 42RU x 32 in. W x 36 in. D • Cable management to support and organize cables, ensuring proper cable Cabinets;Accessories/17904 management for minimum distortion and maximum network performance Index1.Support and Supplies//Physical Support Structure//Cabinets • Choice of solid or plexiglass door Cooling Solutions for Ortronics Cabinets • Cabinet can be mounted to open left or right ORTRONICS PR24085V2-174763.eps • Locking center section swings out to provide easy access to the equipment • Front and center sections are keyed alike • Includes one pair of fully adjustable #12-24 EIA mounting rails • Brush cable entry plates standard on top rear • Cable knockout plates standard on bottom rear • 3 in. hole with cap standard on top and bottom rear • Vented sides for passive cooling of active equipment • Optional 50 cfm cooling fans are available to further protect active equipment • Heavy-duty 14 GA (.075 in.) steel construction • Color is basic black MIGHTY MO WALL MOUNT 24 IN. W X 20 IN. D Ortronics offers a large variety of thermal management products to complete your Anixter No. Vendor No. Description cabinet system. Please see the Power, Cooling and Environmental Monitoring section 410645 MMW122420S-B 12U x 24 in. W x 20 in. D, solid door, for more information. 23.5 in. H, 150 lb. weight capacity 410647 MMW122420P-B 12U x 24 in. W x 20 in. D, plexiglass door, 23.5 in. H, 150 lb. weight capacity 410648 MMW192420S-B 19U x 24 in. W x 20 in. D, solid door, 23.5 in. H, 200 lb. weight capacity 410651 MMW192420P-B 19U x 24 in. W x 20 in. D, plexiglass door, 23.5 in. H, 200 lb. weight capacity Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.57 Racks, Cabinets and Cable Management Ortronics • Locking center section swings out to provide easy access (continued) Mighty Mo Wall Mount Cabinets • Door and center section are keyed alike Anixter No. Vendor No. Description • Includes one pair of fully adjustable #12-24 EIA mounting rails 410652 MMW262420S-B 26U x 24 in. W x 20 in. D, solid door, • Heavy-duty welded steel construction 23.5 in. H, 300 lb. weight capacity • Vented sides for passive cooling of active equipment 410653 MMW262420P-B 26U x 24 in. W x 20 in. D, plexiglass door, • Optional 50 cfm cooling fans are available to further protect active equipment 23.5 in. H, 300 lb. weight capacity Anixter No. Vendor No. Description MIGHTY MO WALL MOUNT 24 IN. W X 26 IN. D 426090 DCW122424S-B 12U x 24 in. W x 24 in. D, solid door, 23.5 in. H, 125 lb. weight capacity Anixter No. Vendor No. Description 426105 DCW122424P-B 12U x 24 in. W x 24 in. D, plexiglass door, 410654 MMW122426S-B 12U x 24 in. W x 26 in. D, solid door, 23.5 in. H, 125 lb. weight capacity 23.5 in. H, 150 lb. weight capacity 426108 DCW192424S-B 19U x 24 in. W x 24 in. D, solid door, 35.75 in. H, 410655 MMW122426P-B 12U x 24 in. W x 26 in. D, plexiglass door, 150 lb. weight capacity 23.5 in. H, 150 lb. weight capacity 426114 DCW192424P-B 19U x 24 in. W x 24 in. D, plexiglass door, 410656 MMW192426S-B 19U x 24 in. W x 26 in. D, solid door, 35.75 in. H, 150 lb. weight capacity 23.5 in. H, 200 lb. weight capacity 410657 MMW192426P-B 19U x 24 in. W x 26 in. D, plexiglass door, DATACAB WALL MOUNT CABINET ACCESSORIES 23.5 in. H, 200 lb. weight capacity Anixter No. Vendor No. Description 410658 MMW262426S-B 26U x 24 in. W x 26 in. D, solid door, 410660 MMCFAN-4-50 Fan kit, 4 in., 50 cfm 23.5 in. H, 300 lb. weight capacity 410662 MMWBPK Brush plate kit 410659 MMW262426P-B 26U x 24 in. W x 26 in. D, plexiglass door, 426127 DCW12M12-B 12U mounting rail, #12-24, one pair 23.5 in. H, 300 lb. weight capacity 426138 DCW19M12-B 19U mounting rail, #12-24, one pair MIGHTY MO WALL MOUNT CABINET ACCESSORIES Cabinets;Ceiling-mount/16486 Index1.Support and Supplies//Physical Support Structure//Cabinets Anixter No. Vendor No. Description Mighty Mo Ceiling Mount Telecom Enclosures 410660 MMCFAN-4-50 Fan kit, 4 in., 50 cfm 410661 MMWHMBM12-B Rear horizontal mount bracket kit, 2U ORTRONICS PR24083V2-174636.eps D 410662 MMWBPK Brush plate kit 410663 MMW12M12-B 12U mounting rail, #12-24, one pair 410664 MMW19M12-B 19U mounting rail, #12-24, one pair 410665 MMW26M12-B 26U mounting rail, #12-24, one pair Cabinets;Wall-mount/17609 Index1.Support and Supplies//Physical Support Structure//Cabinets DataCab Wall Mount Cabinets ORTRONICS PR29314V2-217397.eps The Mighty Mo Ceiling Mount Telecom Enclosure has a unique patent pending swing gate design that allows for easy access to patching and equipment by simply opening the front cover. The swing-out access supports easy re-termination and includes dampening cylinders to control the speed of opening. The attractive exterior blends well with office décor and a lockable front door provides security and protection in public areas. Built-in cable management supports and organizes cables, ensuring proper bend radius. Approved to UL 2043 for use in air handling spaces. Anixter No. Vendor No. Description 400009 MMTECSG22 Mighty Mo telecom enclosure, ceiling mount, DataCab Wall Mount Cabinets are an ideal solution for open office or telecom room 23.50 in. W x 23.50 in. H x 20.61 in. D, 10 rack applications where floor space is limited and are perfect for both active equipment units, 80 lb. capacity, beige and passive zone cabling. The thin line front door construction offers more room in the center section to provide easy access to the equipment. CEILING-MOUNT ACCESSORIES The heavy-duty construction of the cabinet minimizes sagging under heavy loads. The Anixter No. Vendor No. Description hinge side placement of the rear section mounting holes provides additional support 400010 MMTECFCBP Plate kit - includes fan plate with 100 cfm fan, when the center section is open for terminations. guard, 3 ft. cord with plug, cable brush plate The sides of the cabinet are vented for passive cooling of the active quipment, and the and mounting hardware, black optional 50 cfm is 50 percent quieter than the fans of most other leading cabinets. 400011 MMTECFSP Fire stop cable plate kit - includes intumescent FEATURES foam and mounting hardware, set of two, beige • Choice of solid or plexiglass door Request the latest literature and guides from Anixter. 4.58 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Ortronics Cabinets;Accessories/17873 Index1.Support and Supplies//Physical Support Structure//Accessories CURVED BLANK FILLER PANELS PR22637V2-136635.eps Ortronics Tool-less Snap-in Filler Panels ORTRONICS PR34795V2-261600.eps Anixter No. Vendor No. Description 377155 BFPC-1RU Curved Blank Filler Panel to fit with curved PHC patch panel, 482.6 mm width, Tool-less filler panels snap into 19 in. EIA-310-E-compliant tapped or square hole 44.45 mm high, 1 rack unit mounting rails. Since no field modification is required to fit a tapped hole, the panel Racks;Four-post/15572 can be remounted in a square hole in the future eliminating the need to stock two Index1.Support and Supplies//Physical Support Structure//Racks different types of panels. Mighty Mo 10 Cable Management Rack System Anixter No. Vendor No. Description ORTRONICS 442215 BFPT-1RU-10 19 in. W x 1.75 in. H, 1 RU, pack of 10 Mighty Mo 10 racks are designed to maximize the airflow of network equipment. 442216 BFPT-2RU-10 19 in. W x 3.5 in. H, 2 RU, pack of 10 Honeycomb side rails and baffles combine to manage intake and exhaust air creating Cabinets;Accessories/10452 cold aisle/hot aisle air distribution from side vented equipment. The bottom flange Index1.Support and Supplies//Physical Support Structure//Accessories turns inward, allowing it to fit on a 2 ft. x 2 ft. floor tile. Ortronics Blank Filler Panels MIGHTY MO 10 CABLE MANAGEMENT RACKS PR22648V2-137487.eps ORTRONICS PR9327V2-143919.eps Black powder-coated aluminum with a blue silkscreened logo. Static load rating 1,500 lb. UL Listed. FLAT BLANK FILLER PANELS Anixter No. Vendor No. Description Anixter No. Vendor No. Description 363051 MM10716 7 ft. H x 16.25 in. D, black, 45RU 132300 401004788 1.75 in. H x 19 in. W, 1U 363052 MM10816 8 ft. H x 16.25 in. D, black, 51RU 132301 401004789 3.5 in. H x 19 in. W, 2U 132302 401004790 5.25 in. H x 19 in. W, 3U MIGHTY MO 10 SERVER RACK PR34796V2-261601.eps 130290 401004791 7 in. H x 19 in. W, 4U 353679 401045773 38.5 in. H x 19 in. W, 22U ANGLED BLANK FILLER PANELS PR22638V2-136637.eps The Mighty Mo 10 Server Rack works with all of the Mighty Mo 6 and 10 racks and cable management. The mounting rails adjust from 12.5 in. to 30 in., independent Anixter No. Vendor No. Description of the structural members allowing the rails to be adjusted after the rack is 378023 BFPA-1RU 1.75 in. H x 19 in. W, 1U installed. Mighty Mo vertical managers can be mounted front or rear. Color is black. 378024 BFPA-2RU 3.5 in. H x 19 in. W, 2U Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.59 Racks, Cabinets and Cable Management Ortronics (continued) Mighty Mo 10 Cable Management Rack System Anixter No. Vendor No. Description 363064 MM10AB81616 For use with 8 ft. x 16 in. Mighty Mo Anixter No. Vendor No. Description 10 rack and 16 in. wide Mighty Mo 363053 MM107SVR Four-post aluminum frame with steel EIA 10 cage rails, supplied with 50 #12-24 cage nuts 399990 MM10AB73012 For use with MM107SVR, Mighty Mo and screws, 45RU, 7 ft. H 10 server rack, and 12 in. wide Mighty Mo 425824 MM108SVR Four-post aluminum frame with steel EIA 10 cage rails, supplied with 50 #12-24 cage nuts 399991 MM10AB73016 For use with MM107SVR, Mighty Mo and screws, 45RU, 8 ft. H 10 server rack, and 16 in. wide Mighty Mo 363054 MM107SVRABR Server rack baffle rail for mounting 10 cage airflow baffles 425825 MM10AB83012 For use with MM108SVR, Mighty Mo MIGHTY MO 10 VERTICAL CABLE MANAGEMENT CAGE WITH DOOR PR22643V2-136779.eps 10 server rack, and 12 in. wide Mighty Mo 10 cage 425826 MM10AB83016 For use with MM108SVR, Mighty Mo 10 server rack, and 16 in. wide Mighty Mo 10 cage MIGHTY MO 10 VENTED DOOR ASSEMBLIES PR24076V2-174633.eps Cage design promotes efficient routing of patch cords between racks. Hinged doors allow easy access during moves, adds and changes. 16 in. wide cage creates a 12.25 in. gap between racks. 12 in. wide cage creates a 8.25 in. gap between racks for front-to-back routing of equipment cables and patch cords. Both are supplied with four spools and 12 bend-limiting clips. D Anixter No. Vendor No. Description 363055 MM10VMD712 12.13 in. x 13 in. x 7 ft. Door design allows mounting to the front or rear of any Mighty Mo 6 or Mighty Mo 10 rack. The double-hinged door pivots to the right or left and is easily 363056 MM10VMD716 16.38 in. x 13 in. x 7 ft. removed. Black. 363057 MM10VMD812 12.13 in. x 13 in. x 8 ft. Anixter No. Vendor No. Description 363058 MM10VMD816 16.38 in. x 13 in. x 8 ft. 363059 MM10VDA7248 7 ft. x 24 in. with 8.38 in. of clearance MIGHTY MO 10 AIRFLOW BAFFLES PR22642V2-136778.eps behind door for use with VMD-style vertical managers 363060 MM10VDA7244 7 ft. x 24 in. with 4.38 in. of clearance behind door for use without vertical managers 399975 MM10VDA8248 8 ft. x 24 in. with 8.38 in. of clearance behind door for use with VMD-style vertical managers 399976 MM10VDA8244 8 ft. x 24 in. with 4.38 in. of clearance behind door for use without vertical managers Mighty Mo 10 airflow baffles mount between racks and direct intake and exhaust air on side flow network equipment from cold aisle to hot aisle. Anixter No. Vendor No. Description 363061 MM10AB71612 For use with 7 ft. x 16 in. Mighty Mo 10 rack and 12 in. wide Mighty Mo 10 cage 363062 MM10AB71616 For use with 7 ft. x 16 in. Mighty Mo 10 rack and 16 in. wide Mighty Mo 10 cage 363063 MM10AB81612 For use with 8 ft. x 16 in. Mighty Mo 10 rack and 12 in. wide Mighty Mo 10 cage Request the latest literature and guides from Anixter. 4.60 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Ortronics Racks;Four-post/11300 Index1.Support and Supplies//Physical Support Structure//Racks VERTICAL CABLE MANAGEMENT CAGE WITH DOOR PR9345V2-25174.eps Mighty Mo 6 Cable Management Rack System ORTRONICS Mighty Mo 6 Racks are available in 6.5 in., 10.5 in. and 16.25 in. channel depths. The 16.25 in. size is designed specifically for heavy and large networking equipment. The bottom flange on the 16.25 in. version can turn inward so that it will fit on a 2 ft. x 2 ft. floor tile. All Mighty Mo 6 racks and accessories are black. RACKS PR20429V2-77399.eps 10 in. wide cage creates 6.5 in. gap between racks, 6 in. wide cage creates 2.5 in. gap between racks. Both are supplied with four spools and 12 bend limiting clips. Includes mounting hardware. Anixter No. Vendor No. Description 276478 MM6VMD710 10 in. x 13 in. x 7 ft. 276480 MM6VMD706 6 in. x 8 in. x 7 ft. 276482 MM6VMD810 10 in. x 13 in. x 8 ft. 274484 MM6VMD806 6 in. x 8 in. x 8 ft. Static load rating 1,500 lb. UL Listed. VERTICAL CABLE MANAGEMENT CAGE WITH COVER PR20430V2-77409.eps Anixter No. Vendor No. Description 341682 MM6706 7 ft. H x 6.5 in. D 274481 MM6710 7 ft. H x 10.5 in. D 276262 MM6716 7 ft. H x 16.25 in. D 274482 MM6810 8 ft. H x 10.5 in. D 276237 MM6816 8 ft. H x 16.25 in. D MIGHTY MO CHANNEL BEND LIMITERS PR24078V2-174647.eps Cage design promotes efficient routing of patch cords between racks. Dual snap-on hinged covers allow easy access during moves, adds and changes. 6 in. wide cage creates a 2.5 in. gap between racks for front-to-back routing of equipment cables and patch cords. 6 in. wide cage is supplied with four spools and 12 bend-limiting clips. Includes mounting hardware. Anixter No. Vendor No. Description 341683 MM6VMS704 4 in. x 7 in. x 7 ft. 341684 MM6VMS706 6 in. x 7 in. x 7 ft. Mighty Mo channel bend limiters clip onto the top edge of Mighty Mo channels 353682 MM6VMS804 4 in. x 7 in. x 8 ft. providing the proper bend radius for cables entering the channel. Set of two; black. 353683 MM6VMS806 6 in. x 7 in. x 8 ft. Anixter No. Vendor No. Description VERTICAL CABLE MANAGEMENT CAGE WITH LATCHES PR20431V2-77387.eps 399996 MM6CBL06 For use with Mighty Mo racks with 6.5 in. channels 399998 MM6CBL10 For use with Mighty Mo racks with 10.5 in. channels 399999 MM6CBL16 For use with Mighty Mo racks with 16.25 in. channels Promotes efficient routing of patch cords between racks. Hinged latches allow easy Continued on next page >> access during moves, adds and changes. 6 in. wide cage creates a 2.5 in. gap between racks for front-to-back routing of equipment cables and patch cords. Includes mounting hardware. Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.61 Racks, Cabinets and Cable Management Ortronics MIGHTY MO 6 VERTICAL MANAGEMENT BRACKET KIT PR20490V2-77418.eps (continued) Mighty Mo 6 Cable Management Rack System Anixter No. Vendor No. Description 353684 MM6VML704 With latches, 4 in. x 6 in. x 7 ft. 276494 MM6VML706 6 in. x 6 in. x 7 ft. 353686 MM6VML804 4 in. x 6 in. x 8 ft. 276496 MM6VML806 6 in. x 6 in. x 7 ft. MIGHT MO 10 WATERFALL EXTENSION PR22652V2-137493.eps Vertical management bracket kit includes four brackets and all the hardware needed to mount two Mighty Mo 6 vertical managers to a standard EIA rack. Kit consists of four brackets, eight panel mounting screws and four cage mounting screws. Anixter No. Vendor No. Description 353688 60400687 Kit of four END PANEL - STANDARD PR9343V2-143927.eps Increases the height of the front flange of the Mighty Mo waterfall by 57.15 mm when additional cable capacity is required. Anixter No. Vendor No. Description 376945 MM10WFE Waterfall extension VERTICAL CABLE MANAGEMENT SPOOLS PR9341V2-143925.eps For use with 6 in. Mighty Mo 6 vertical cable managers, also includes mounting hardware. Anixter No. Vendor No. Description D 371366 MM6EP706 7 ft. H for 6.5 in. channel 276521 MM6EP710 7 ft. H for 10.5 in. channel 276522 MM6EP716 7 ft. H for 16.25 in. channel 276523 MM6EP810 8 ft. H for 10.5 in. channel 276524 MM6EP816 8 ft. H for 16.25 in. channel END PANEL - NARROW Come in sets of four. For use with 4 in. Mighty Mo 6 vertical cable managers, also includes Anixter No. Vendor No. Description mounting hardware. 353687 MM6CMS10 11 in. long for 10 in. cage Anixter No. Vendor No. Description 276525 MM6CMS8 8 in. long for 10 in. cage 378332 MM6EPN706 7 ft. H for 6.5 in. channel 276526 MM6CMS6 6 in. long for 6 in. cage 378331 MM6EPN710 7 ft. H for 10.5 in. channel BEND LIMITING CLIP PR9339V2-143923.eps 378333 MM6EPN716 7 ft. H for 16.25 in. channel 425827 MM6EPN810 8 ft. H for 10.5 in. channel 425828 MM6EPN816 8 ft. H for 16.25 in. channel Come in sets of 12. Anixter No. Vendor No. Description 276527 MM6BLC 3.25 in. long Request the latest literature and guides from Anixter. 4.62 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Ortronics CABLE RUNWAY MOUNTING BRACKET PR9342V2-143926.eps HORIZONTAL CABLE MANAGEMENT PANEL PR9344V2-143928.eps Note: #12-24 mounting hardware included. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 329311 MM6HMF1RU 1.75 in. x 19 in., 1RU 353689 MM6CRB06 For 6.5 in. channel depth 276534 MM6HMF2RU 3.5 in. x 19 in., 2RU 276528 MM6CRB10 For 10.5 in. channel depth 373676 MM6HMF4RU 7 in. x 19 in., 4RU 276529 MM6CRB16 For 16.25 in. channel depth 286477 MM6HM61RU 1.75 in. x 19 in., 1RU 425829 MM10CRBSVR For MM10 server rack 300026 MM6HM62RU 3.5 in. x 19 in., 2RU 425830 MM10CRBRSVR For rear of MM10 server rack 353691 MM6HM81RU 1.75 in. x 19 in., 1RU 338940 MM6HM82RU 1.75 in. x 19 in., 2RU MIGHTY MO ISOLATION PAD KIT PR24082V2-174640.eps 353693 MM6HM6D2RU 3.5 in. x 19 in., double sided BASE DUST COVER PR9338V2-143922.eps Isolates Mighty Mo racks from concrete floors for effective bonding and grounding. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 353694 MM6BDC06 For 6.5 in. channel depth 400000 MMIPK Isolation pad kit for Mighty Mo racks 276532 MM6BDC10 For 10.5 in. channel depth MIGHTY MO 6 CABLE TROUGH PR22651V2-137485.eps 276533 MM6BDC16 For 16.25 in. channel depth Racks;Accessories/14664 Index1.Support and Supplies//Physical Support Structure//Racks Overhead Cable Pathway Rack ORTRONICS PR29320V2-217523.eps For supporting fiber cables at the bottom of Mighty Mo racks. The kit includes an extension that bridges the space between racks and mounting hardware. Anixter No. Vendor No. Description 378336 MM6CT4RU Cable trough, 4RU 378337 MM6CT4RUK Cable trough kit, 4RU The Mighty Mo overhead cable pathway racks provide cable management and an innovative mounting method for 19 in. rack-mount copper and fiber panels and cabinets. The pathway racks allow horizontal connectivity to be supported by the overhead pathway freeing up valuable rack or cabinet space below. Includes everything needed to mount the bracket to the side of runway with 1 1/2 in. stringers or any Cablofil cable tray 2 in. or deeper. Anixter No. Vendor No. Description 353704 60401001 23.6 in. W x 7.4 in. H x 9 in. D, 2RU 353705 60401015 23.6 in. W x 12.6 in. H x 9 in. D, 5RU 425906 60401089 23.6 in. W x 17.86 in. H x 9 in. D, 8RU Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.63 Racks, Cabinets and Cable Management Ortronics Racks;Four-post/2491 Index1.Support and Supplies//Physical Support Structure//Racks ADJUSTABLE SHELVES PR6833V2-25018.eps Adjustable Dual Equipment Racks and Accessories ORTRONICS The patented adjustable dual equipment racks provide a solid, sturdy foundation for mounting heavier network equipment. The design also expands installation opportunities by enabling cross-connects, facilitating cable management and eliminating heat build-up. Available in two depths. Constructed of 6061-T6 structural grade aluminum. FEATURES • Self-support, self-squaring Anixter No. Vendor No. Description • Assembles quickly and easily 260910 ES-19-FDR2126 21-26 in. deep, solid • 24 mounting screws included 251821 ES-19-FDR2732 27-32 in. deep, solid • 5/8 in., 5/8 in. Universal mounting hole pattern 259878 ESV-19-FDR2126 21-26 in. deep, vented • Meets EIA-310 • Black powder coat finish 261188 ESV-19-FDR2732 27-32 in. deep, vented ADJUSTABLE RACKS PR2347V2-25708.eps FIXED SHELVES PR6834V2-25012.eps D Anixter No. Vendor No. Description Anixter No. Vendor No. Description 204733 19-84-T4SDA1520 84 in. H x 19 in. W x 15-20 in. D, 261176 ESV-19-SDR2126F 21-26 in. deep, vented 45U, #12-24 261178 ESV-19-SDR2732F 27-32 in. deep, vented 375954 19-84-T4SDA2132 84 in. H x 19 in. W x 21-32 in. D, 45U, #12-24 384762 19-84-SSDA2132 84 in. H x 19 in. W x 21-32 in. D, 45U, M6 CAGE NUTS PR6832V2-25015.eps Anixter No. Vendor No. Description 259874 PS-1032CN 10-32 cage nuts, 50 per bag 259873 PS-1224CN 12-32 cage nuts, 50 per bag 425911 RU-1224CN Rack unit cage nuts, #12-24 thread, pkg. of 50, clear 425912 RU-M6X1CN Rack unit cage nuts, M6X1 thread, pkg. of 50, clear Request the latest literature and guides from Anixter. 4.64 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Ortronics Racks;Two-post/14687 Index1.Support and Supplies//Physical Support Structure//Racks STANDARD VERTICAL CABLE MANAGEMENT CAGE WITH COVER PR24088V2-174775.eps Two-post Racks and Accessories ORTRONICS The Ortronics computer-guided manufacturing process assures that each rack meets exact dimensions, guaranteeing a self-squaring assembly. Made of top-quality 6061-T6 structural grade aluminum, Homaco equipment racks provide strength and stability for years. Racks ship unassembled for efficient delivery and storage. SPECIFICATIONS 1. 5/8 in., 5/8 in., 1/2 in. Universal mounting hole pattern 2. Equipped with 1/2 in. junctioning holes for securing multiple-rack lineups 3. Meets EIA-310 standards Mounts to side of standard EIA rack. The fingers are spaced to line up with rack 4. Listed to the UL 1863 Standard for Communication Circuit Accessories units, promoting efficient routing of patch cords to patch panels and equipment FEATURES from the vertical manager. Dual snap-on hinged covers allow easy access during moves, add and changes. Available in single-sided and double-sided versions. • Self-squaring and self-supporting Includes all hardware necessary to mount to the side of a standard EIA rack. • Tapped uprights so no nuts are required for assembly Anixter No. Vendor No. Description • Top angles, patented self-support base are standard 400402 SVMS704 3.75 in. x 6.58 in. x 7 ft., single-sided • Assembly hardware included • Mounting holes are roll formed for work hardened thread system 394836 SVMS706 6.00 in. x 6.58 in. x 7 ft., single-sided • Includes 12-24 cross-recessed black panel mounting screws 400403 SVMS804 3.75 in. x 6.58 in. x 8 ft., single-sided • Constructed of 6061-T6 structural-grade aluminum 400404 SVMS806 6.00 in. x 6.58 in. x 8 ft., single-sided • 3 in. x 1 1/4 in. channel uprights 400405 DVMS704 3.75 in. x 13.17 in. x 7 ft., double-sided 400406 DVMS706 6.00 in. x 13.17 in. x 7 ft., double-sided STANDARD EQUIPMENT RACKS PR20435V2-77413.eps 400407 DVMS804 3.75 in. x 13.17 in. x 8 ft., double-sided 400409 DVMS806 6.00 in. x 13.17 in. x 8 ft., double-sided VERTICAL ORGANIZERS PR20436V2-77414.eps Anixter No. Vendor No. Description 168007 19-84-T2SD 84 in. H x 19 in. W x 15 in. D, 45U, aluminum 192349 19-84-T2SDB 84 in. H x 19 in. W x 15 in. D, 45U, black Homaco patented vertical organizers save time and money during moves, adds and 168085 23-84-T2SD 84 in. H x 23 in. W x 15 in. D, changes to patch panels. Rings in the front organize patch cords with ease. A rear, 45U, aluminum U-shaped channel is formed either between equipment racks or at the end of a lineup to provide a pathway for delivering horizontal cables to patch panels. The 262614 23-84-T2SDB 84 in. H x 23 in. W x 15 in. D, 45U, black 6 in. width is used between fully-loaded racks; the 3 in. width is used with a single EQUIPMENT RACK ISOLATION PAD KIT PR24087V2-174770.eps rack, at the end of a lineup or between partially loaded racks. Anixter No. Vendor No. Description 194131 VO-84-T3E 79 in. H x 3 in. W x 5.31 in. D, solid 195137 VO-84-T6E 79 in. H x 6 in. W x 5.31 in. D, solid 226514 VO-84-T3FTE 79 in. H x 3 in. W x 5.31 in. D, feed-through 208451 VO-84-T6FTE 79 in. H x 6 in. W x 5.31 in. D, feed-through Isolates equipment racks from concrete floors for effective bonding and grounding Anixter No. Vendor No. Description 400410 IPK Isolation pad kit for standard equipment racks Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.65 Racks, Cabinets and Cable Management Ortronics Racks;Wall-mount/10217 Racks;Wall-mount/10667 Index1.Support and Supplies//Physical Support Structure//Racks Index1.Support and Supplies//Physical Support Structure//Racks Swing-EZ Wall Racks Wall-mount Relay Racks ORTRONICS PR6836V2-11666.eps ORTRONICS PR9332V2-143921.eps The patented Swing-EZ Wall Rack arrives ready to square- and keyhole-mount in Ortronics wall-mount relay racks are designed for applications where space is minutes. Reinforcement plates stabilize the frame to allow maximum load-bearing critical. Their wall-mount design increases closet wiring capacity while allowing rear capacity. Hub and LAN applications are easily accommodated without door access to patch panels and equipment. deflection. Latch pins or bolts secure the door to the frame and remove to smoothly Anixter No. Vendor No. Description swing open from the left or right. 224592 604045400 20.25 in. W x 18 in. D x 26 in. H, 12U FEATURES 242072 604045450 20.25 in. W x 18 in. D x 38 in. H, 18U • Both latch pins and bolts are included 240553 604045451 20.25 in. W x 18 in. D x 50 in. H, 25U • Velcro straps feed into slots for backside cable management Racks;Accessories/3945 Index1.Support and Supplies//Physical Support Structure//Hinged Wall Mount • Side panels fold flat for shipping, then unfold for easy on-site assembly Hinged Wall-mount Bracket • 5/8 in., 5/8 in., 1/2 in. Universal mounting hole pattern • Mounting holes threaded for #12 to 24 hardware ORTRONICS PR9807V2-23463.eps • Includes cross-recessed #12 to 24 black panel mounting screws • Meets EIA-310 standards D • Listed to the UL 1863 Standard for Communication Circuit Accessory • Hint: Cable management products manage Swing-EZ cables both horizontally and vertically. Use organizers with side rings for optimum cable delivery Anixter No. Vendor No. Description 133550 19-21-T12D 21 in. H x 19.75 in. W x 12 in. D, 11U, gray These brackets meet smaller system requirements and allow easy access to the rear 261184 19-21-T12DB 21 in. H x 19.75 in. W x 12 in. D, of the panels. Holes in the back plate allow for rear cable feed through. 11U, black Anixter No. Vendor No. Description 176026 19-21-T18D 21 in. H x 19.75 in. W x 18 in. D, 104345 604004396 3.5 in. H x 19 in. W x 6 in. D, 2RU 11U, gray 103907 604004301 5.25 in. H x 19 in. W x 6 in. D, 3RU 227935 19-21-T18DB 21 in. H x 19.75 in. W x 18 in. D, 138722 604004068 7 in. H x 19 in. W x 6 in. D, 4RU 11U, black 113514 604004645 10.5 in. H x 19 in. W x 6 in. D, 6RU 168671 19-35-T18D 35 in. H x 19.75 in. W x 18 in. D, Racks;Accessories/10454 19U, gray Index1.Support and Supplies//Physical Support Structure//Accessories 228247 19-35-T18DB 35 in. H x 19.75 in. W x 18 in. D, Equipment Support Bracket 19U, black ORTRONICS 261185 19-35-T25DHYDT 38.25 in. H x 19.75 in. W x 25 in. D, 19U, Mounts on the rear of any 19 in. rack to support the weight of heavy equipment. The heavy-duty, gray bracket is especially effective on the Mighty Mo racks where the channel depth is 6.5 in. or deeper. Black. Includes #12-24 mounting hardware. Anixter No. Vendor No. Description 217307 60400383 19 in. W x 1.75 in. H x 1 in. D Request the latest literature and guides from Anixter. 4.66 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Ortronics Racks;Accessories/10451 cords. Includes all hardware necessary to mount cage on face of two Mighty Mo Index1.Support and Supplies//Physical Support Structure//Accessories 6 racks, single rack or end of row. Grounding Kit for Mighty Mo Racks Anixter No. Vendor No. Description ORTRONICS 353684 MM6VML704 With latches, 4 in. x 6 in. x 7 ft. This kit provides a reliable systems ground for the distribution rack. One kit is 333784 MM6VML706 With latches. To be used on 45U racks. recommended for each rack. 152.4 mm W x 2,135 mm H x Anixter No. Vendor No. Description 152.4 mm D. Color is black 217308 60400010 Single conductor ground lug for 6 AWG to Shelves;Rack Shelves/471 Index1.Support and Supplies//Physical Support Structure//Accessories 14 AWG conductors Mighty Mo Equipment Shelves Cable Management;Vertical and Horizontal/16494 Index1.Support and Supplies//Physical Support Structure//Racks ORTRONICS PR7089V2-36188.eps Mighty Mo 6 110D Distribution Frame ORTRONICS PR29313V2-217400.eps Aluminum equipment shelf with black finish. Made for a 19 in. EIA rack. EQUIPMENT SHELF Holds up to 75 lb., inside width is 17 in., black Anixter No. Vendor No. Description Ortronics Mighty Mo 6 110D Distribution Frame provides total vertical cable management to route cable more effectively in a 110 cross connect. Use with 134761 60400006 5.25 in. H x 19 in. W x 12.125 in. D OR-30600166 to mount 300-pair 110 blocks with legs. Front and rear mounting 204672 60400405 5.25 in. H x 19 in. W x 15.125 in. D supports up to 9,000 pairs. Includes cable management straps in 6.5 in. deep CANTILEVERED VENTED EQUIPMENT SHELF vertical channels. Color is black. Holds up to 85 lb., inside width is 17.5 in., black Anixter No. Vendor No. Description Anixter No. Vendor No. Description 400501 MM67110D 39 in. x 86 in. x 16.50 in. 201539 604045075 5.75 in. H x 19 in. W x 20 in. D 900-PAIR RACK-MOUNT PANEL WITH CABLE TROUGHS 204657 604045081 5.75 in. H x 19 in. W x 24 in. D PR24089V2-174767.eps STANDARD VENTED EQUIPMENT SHELF Holds 50 lb. capacity, inside width is 17.5 in., black Anixter No. Vendor No. Description 219263 604045401 4 in. H x 19 in. W x 16 in. D VENTED EQUIPMENT SHELF FOR MIGHTY MO RACKS This four-point shelf can be used with Mighty Mo racks in all three channel depths, 150 lb. capacity, black Anixter No. Vendor No. Description Accepts three 300-pair 110 blocks with legs. 232060 604045388 5.75 in. H x 19 in. W x 20 in. D Anixter No. Vendor No. Description 250631 30600166 34.25 in. x 14.54 in. FOLDING KEYBOARD SHELF MIGHTY MO 6 VERTICAL CABLE MANAGEMENT CAGE WITH LATCHES PR24090V2-174771.eps Anixter No. Vendor No. Description 242104 60400550 19 in. W, 1U, black ADJUSTABLE FOUR-POST EQUIPMENT SHELF This equipment shelf has a fixed front flange with an infinitely adjustable rear flange that allows for secure four-point mounting as deep as 30 in. Holds 200 lb. capacity, inside width is 17.25 in., black Anixter No. Vendor No. Description 241649 60400538 1.7 in. H x 19 in. W x 30 in. D Patented design promotes efficient routing of patch cords between racks. Hinged latches allow easy access during moves, adds and changes. 6 in. wide cage creates Continued on next page >> a 2.5 in. gap between racks for front-to-back routing of equipment cables and patch Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.67 Racks, Cabinets and Cable Management Ortronics Shelves;Wall-mount/472 Index1.Support and Supplies//Physical Support Structure//Accessories (continued) Mighty Mo Equipment Shelves Wall-mount Shelf DOUBLE-SIDED EQUIPMENT SHELVES ORTRONICS PR1552V2-14012.eps For use with Mighty Mo racks with 6.5 in. channels. Holds 150 lb. capacity, inside width is 17 in. Anixter No. Vendor No. Description 226289 60400355 19 in. W x 5.25 in. H x 24 in. D, black FOUR-POINT EQUIPMENT SHELF FOR MIGHTY MO RACKS AND CABINETS This one-unit shelf works with Mighty Mo racks with all depth channels and Mighty Mo cabinets 24 in. and deeper. Shelf is 17.25 in. wide, black Anixter No. Vendor No. Description 305721 604045681 19 in. W x 1.75 in. H x 20 in. D, black Shelves;Rack Shelves/10221 Index1.Support and Supplies//Physical Support Structure//Accessories Steel wall-mount shelf with black finish. Designed for smaller applications where Homaco Equipment Shelves space is limited and a free-standing rack cannot be used. 4.875 in. H x 20 in. W x 18 in. D. 120 lb. capacity ORTRONICS PR6837V2-11669.eps Anixter No. Vendor No. Description 170306 604044927 Wall-mount shelf Cable Management;Horizontal/3787 Index1.Support and Supplies//Physical Support Structure//Accessories Finger Duct Cable Management Panels ORTRONICS PR9335V2-36189.eps Homaco offers several styles of equipment shelves for all your needs. Shelves mount on any 19 in. wall or free-standing rack. 23 in. versions are also available. Mounting hardware included. D SOLID Anixter No. Vendor No. Description Ortronics closed cover finger duct cable management panels provide organized 226513 ES-19-MCSB 5.25 in. H x 17.5 in. W x 12 in. D, movement for horizontal and vertical routing of patch cables on 19 in. EIA black, multi-configuration distribution racks. 259876 ES-19-FMB 5.25 in. H x 17.25 in. W x 14 in. D, Anixter No. Vendor No. Description black, front-mount 139080 808000010 1.5 in. H x 1.5 in. D, 1U 201935 ES-19-3B 3.5 in. H x 17.38 in. W x 15.5 in. D, black 139081 808044508 3 in. H x 1.5 in. D, 2U 232076 ES-19-4B 3.5 in. H x 17.38 in. W x 21.75 in. D, black 139082 808044549 3 in. H x 3 in. D, 2U VENTED Anixter No. Vendor No. Description 261189 ESV-19-FMB 5.25 in. H x 17.25 in. W x 14 in. D, black, front-mount 262169 ESV-19-3B 3.5 in. H x 17.38 in. W x 15.5 in. D, black 262171 ESV-19-4B 3.5 in. H x 17.38 in. W x 21.75 in. D, black Request the latest literature and guides from Anixter. 4.68 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Ortronics Cable Management;Horizontal/2485 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description Cable Management Panels 241633 60400614 Snap-type, 1.75 in. x 6 in., pk of 14 353984 60400542 Snap-type, 1.75 in. x 6 in., pk of two ORTRONICS pr5194V2-14201.eps 353986 60400314 Snap-type, 1.75 in. x 3 in., pk of 14 353989 60400302 Snap-type, 1.75 in. x 3 in., pk of two MIGHTY MO CABLE MANAGEMENT RINGS PR1549V2-14004.eps Ortronics cable management panels provide organized movement of patch cables horizontally, vertically and from front to back on 19 in. (483 mm) EIA distribution racks. Note: includes #12 to 24 mounting hardware. FEATURES • Sturdy steel or aluminum construction • Eliminates congestion around equipment • Cables are arranged in a well-managed fashion These rings allow efficient routing of patch or cross-connect cables between Anixter No. Vendor No. Description distribution racks. They can be mounted where needed on the front and back of the 149782 808004759 Five horizontal distribution plastic rings, Mighty Mo racks. Black. 1.7 in. H x 2.7 in. D, 1U Anixter No. Vendor No. Description 152928 60400057 Five horizontal distribution rings, 217299 60400017 2 in. x 6 in., pk of 14 3 in. H x 4 in. D, 2U 187678 60400062 2 in. W x 6 in D-Rings with mount 132291 808004867 Five horizontal distribution rings, hardware., pk of two 3.95 in. H x 2.4 in. D, 2U Cable Management;Horizontal/469 Index1.Support and Supplies//Physical Support Structure//Wire 170261 808044855 Four horizontal and four vertical distribution rings, Wire Management Cable Support Bar 2 in. H x 4 in. D, ORTRONICS PR29325V2-217516.eps 24 plastic routing clips, 2U 130227 808004818 Five distribution rings, 3.95 in. H x 4.8 in. D, 2U 219824 60400131 Five horizontal distribution rings, 1.7 in. H x 3.5 in. D, 1U 262099 808045590 Five horizontal distribution rings, 1.7 in. H x 6 in. D, 1U 353972 808045768 Five horizontal distribution rings, 1.7 in. H x 3 in. D, 1U Cable Management;Cable Rings/2469 Index1.Support and Supplies//Physical Support Structure//Accessories CABLE MANAGEMENT SUPPORT BAR, ZERO RU Cable Management Rings Provides strain relief at the front or rear of a standard 19 in. patch panel that does ORTRONICS not include rear management panels. The support bar is mounted with patch panel mounting screws to the front or with the supplied additional nuts to the rear. MIGHTY MO CABLE MANAGEMENT RINGS, SNAP TYPE PR20437V2-77386.eps Black finish. Anixter No. Vendor No. Description 398993 CMBFR0RU 19 in. W x 4 in. D CABLE MANAGEMENT SUPPORT BAR Provides additional strain relief at the rear of a 19 in. EIA distribution rack for the horizontal wiring cables terminated to the modular patch panels. The cable support bar is mounted to the rear upright U channel of the distribution rack by thumbscrews which allow easy access for lacing and termination to the equipment. Anixter No. Vendor No. Description 152936 60400046 U-type, 1.5 in. D, 19 in. W These black plastic rings flex at the end for easy insertion or removal of cross-connect cables. They snap in place on the front and back of the Mighty Mo racks. Black. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.69 Racks, Cabinets and Cable Management Ortronics Cable Management;Horizontal/10457 Index1.Support and Supplies//Physical Support Structure//Accessories PLENUM-RATED CABLE MANAGEMENT STRAPS PR11037V2-25344.eps Bend-limiting Strain Relief Bar ORTRONICS PR9328V2-143920.eps The bar has curved falls that prevent cable crimping and help maintain the proper bend radius. The bar mounts to the rear of standard 19 in. racks. Route cable ties Ortronics Plenum Cable Management Straps provide an organized solution for the through the holes in the bar to hold cables in place. management of cables in plenum rated air handling spaces. These 1/2 in. wide Anixter No. Vendor No. Description hook-and-loop type straps are reusable, easy to install and will not damage high-performance cabling. Sold in 20 count rolls that are neat, convenient and quick 203576 60400199 19 in. W x 1 in. H x 2.5 in. D, 1U to use. Cranberry color. Cable Management;Straps/10445 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description Cable Management Straps 313952 70700143 8 in. L x 0.5 in. W, grip range: 0.75 in. to 1.75 in. diameter ORTRONICS 313955 70700144 12 in. L x 0.5 in. W, grip range: 0.75 in. to HOOK-AND-LOOP CABLE MANAGEMENT STRAPS 3 in. diameter These 0.75 in. W straps have a hook-and-loop type closure to secure and administer Cable Management;Horizontal/2552 Index1.Support and Supplies//Physical Support Structure//Accessories cables without damaging the construction of the copper or fiber cable. Sold in packages of 12. Black. Feed-through Cable Management Panels Anixter No. Vendor No. Description ORTRONICS pr5195V2-14204.eps 187676 70700084-00 18 in. L, grip range: 2 in. to 4 in. diameter, black D COLOR-CODED CABLE MANAGEMENT STRAPS PR9808V2-23466.eps Ortronics Feed-through Cable Management Panels provide organized management of patch cables horizontally, vertically and from front to back on 19 in. EIA distribution racks. Color is black. Note: Includes #12 to 24 mounting hardware. Anixter No. Vendor No. Description 170260 60400129 Five horizontal distribution rings 1.7 in. H x 3.5 in. D, 1U 170263 808044916 Five horizontal distribution rings Ortronics color-coded cable management straps provide an organized solution for 3 in. H x 2 in. D, 2U the management of patch and horizontal distribution cables. The 0.625 in. W straps 170264 808044915 Four horizontal distribution rings have a hook-and-loop type closure to secure and administer cables without 2 in. H x 4 in. D, 24 routing clips, 2U damaging the construction of the copper and fiber cable. Sold in packages of ten. 236828 60400426 Five horizontal distribution rings NOTE: To order colored straps, specify color by putting color code at end of part 3 in. H x 4 in. D, four number. (Example to order a 6 in. red OR-70700080 strap: OR-70700080-22). Color code: -00 black, -22 red, -23 orange, -24 yellow, -25 green, -26 blue 2.75 in. x 2.75 in. cutouts, 2U Anixter No. Vendor No. Description 165409 70700080-00 6 in. L x 0.625 in. W, black 167680 70700079-00 12 in. L x 0.625 in. W, black Request the latest literature and guides from Anixter. 4.70 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Ortronics Cable Management;Vertical and Horizontal/2612 Cable Management;Horizontal/2610 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Patch Cord Organizers Interbay Organizers ORTRONICS PR6835V2-143902.eps ORTRONICS pr4970V2-11655.eps Patch cord organizers create horizontal and vertical pathways for frontside cable management. Designed for use with modular jack panels, the organizers simplify the tracing, identifying and rerouting of patch cords. To handle both frontside and Ideal for bulk-routing patch cords between bays and within bays to eliminate backside management in the same rack space for Gigabit Ethernet installations, use congestion, interbay organizers are larger in capacity than patch cord organizers. combination organizers. Express routes make it easier to trace circuits during future maintenance. Part No. FCM 221992 features feed-through holes. Anixter No. Vendor No. Description Inside Ring Rack Spaces 103815 FCM-19-1 Vertical ring 3.75 in. x 1.75 in., 1U Anixter No. Vendor No. Dimensions (in.) (1.75 in.) 096965 FCM-19-2 Horizontal ring: 1.75 in. x 1.75 in., 183132 FCM-19-1XL 1.5 in. H x 3.5 in. D 1U vertical ring 3.75 in. x 1.75 in., 2U 129319 FCM-19-2XL 3.0 in. H x 3.5 in. D 2U 221992 FCM-19-2XLH 3.0 in. H x 3.5 in. D 2U FCM SR 197683 FCM-19-4XL 6.5 in. H x 3.5 in. D 4U Anixter No. Vendor No. Description 246643 FCM-19-1SR Horizontal ring: 1 in. x 1.75 in., vertical ring 1.75 in. x 1.75 in., 1U 262173 FCM-19-2SR Horizontal ring: 1.75 in. x 1.75 in., vertical ring 1.75 in. x 1.75 in., 2U FCM SRC Anixter No. Vendor No. Description 221082 FCM-19-1SRC Horizontal ring: 1.0 in. H x 1.75 in. D, 1U 240618 FCM-19-2SRC Horizontal ring: 1.75 in. x 1.75 in., 2U FCM L Anixter No. Vendor No. Description 129707 FCM-19-2L Horizontal ring: 3.75 in. x 1.75 in., vertical ring 3.75 in. x 1.75 in., 2U Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.71 Racks, Cabinets and Cable Management PANDUIT ./Cabinets;Free-standing, Network and Server/17525 Cabinets;Free-standing, Network and Server/13545 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets NET-SERV Standard Density Cabinets NET-ACCESS Switch and Server Cabinets PANDUIT PR29175V2-215805.eps PANDUIT PR24062V2-173999.eps NET-SERV Cabinets are designed to provide the best combination of space utilization NET-ACCESS Switch and Server Cabinets combine superior cable management, inset and thermal management for server applications. NET-SERV Cabinets are designed to structural frame and door perforation patterns to ensure proper heat dissipation for complement the NET-ACCESS Cabinets and provide a complete, optimized physical improved network performance and availability. infrastructure solution for all switch and server architectures. SPECIFICATIONS SPECIFICATIONS 1.84.0 in. H x 31.5 in. W x 41.1 in. D (2,134 mm x 800 mm x 1,044 mm) - 45RU 1. 1,200 mm (48 in.) depth 2. All welded frame construction 2. Two sets, cage nut, infinitely adjustable equipment mounting rails, (50) 3. Adjustable equipment mounting rails #12-24 cage nuts and screws included 4. Equipment mounting depths up to 25.9 in. (658 mm) for CN series; 29 in. 3. Printed rack space identification on front and back of rails, default is numbers (737 mm) for CS series up, may be field adjusted to numbers down 5. Doors include keyed swing handles 4. Equipment mounting depth up to 42 in. (1,067 mm) 6. Side panels include keyed push button latches 5. Doors include keyed swing handles 17. Cabinet supplied with cable management; for additional cable management 6. Side panels include keyed locks finger sections, specify part number CNBRFK D 7. POU mounting brackets included to mount two POUs 8. Cable capacity of each RU is 48 Category 6 cables 8. Vertical blanking panels installed 9. Durable black polyester epoxy powder coat finish 9. Easily adjustable leveling legs installed 10. UL Listed 2,500 lb. (1,134 kg) load rating 10. Ganging brackets included 11. Cabinet ships assembled, one per pallet 11. Anti-tip brackets included SWITCH CABINET 12. Available in four configuration options: Basic, Standard Density, High Density, NET-ACCESS Switch Cabinets are designed to optimize thermal performance of and Vertical Patching network switches while ensuring industry recommended six-inch clearance between 13. Durable black polyester epoxy powder coat finish equipment and cabinet walls. Cabinet features optional ducting for higher 14. All welded frame construction heat densities. 15. 2,500 lb. (1,134 kg) load rating Anixter No. Vendor No. Description 16. Removable top cap included 332419 CN1 Cabinet frame with top panel, dual-hinge 17. Cabinet ships assembled, one per pallet perforated front door, split perforated rear 18. Optional casters available door and solid side panels 19. Optional vertical exhaust duct for maximum energy efficiency 332420 CN2 Cabinet frame with top panel, dual-hinge Anixter No. Vendor No. Description perforated front door and split perforated 425270 S722C122F 42RU x 700 mm W cabinet with full rear door perforated front door, split perforated rear 328954 CN3 Cabinet frame only, with top panel door and solid side panels 399224 CN4 Cabinet frame with top panel, split 425271 S752C122F 45RU x 700 mm W cabinet with full perforated front and rear doors, solid perforated front door, split perforated rear side panels door and solid side panels 425272 S622C122F 42RU x 600 mm W cabinet with full perforated front door, split perforated rear door and solid side panels 425273 S652C122F 45RU x 600 mm W cabinet with full perforated front door, split perforated rear door and solid side panels For cage nut rails use CN*CN, i.e. CN1CN Request the latest literature and guides from Anixter. 4.72 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management PANDUIT SERVER CABINET ground contact simplifies proper grounding technique. PATCHRUNNER and NET-ACCESS Server Cabinets provide scalable thermal management for low- to NETRUNNER Vertical Cable Managers mount directly to the 4-post Rack at any of the high-heat density applications. Air blocking features ensure cold air is directed to four posts to provide a flexible end-to-end cable management solution. The 4-post servers, as a result, cabinet temperatures can be decreased. Rack has a weight rating of 2,500 lb. and depths to accommodate the latest Cisco Anixter No. Vendor No. Description Nexus switch products. 363211 CS1 Cabinet with single hinge perforated front 7 FT. RACK door. Split perforated rear door. Solid side Anixter No. Vendor No. Description panels. Two sets of cage nut equipment 417429 R4P #12-24 threaded equipment mounting rails. One set of POU mounting rails; 84.0 in. H x 23.3 in. W x mounting brackets 30.0 in. D, 45RU 363213 CS2 Cabinet with single hinge perforated front 415184 R4PCN Cage nut style equipment mounting rails; door. Split perforated rear door. Two sets 84.0 in. H x 23.3 in. W x 30.0 in. D, 45RU of cage nut equipment mounting rails. 363197 R4P23 #12-24 threaded equipment One set of POU mounting brackets mounting rails; 84.0 in. H x 23.3 in. W x 358097 CS3 Cabinet with top panel. Two sets of cage 23.0 in. D, 45RU nut equipment mounting rails. One set of 363206 R4P23CN Cage nut style equipment mounting rails; POU mounting brackets 84.0 in. H x 23.3 in. W x 23.0 in. D, 45RU For cage nut rails use CN*CN i.e. CN1CN 443266 R4P36 Cage nut style equipment mounting rails; 84.0 in. H x 23.3 in. W x 23.2 in. D, 45RU Cabinets;Accessories/17905 Index1.Support and Supplies//Physical Support Structure//Cabinets 443267 R4P36CN Cage nut style equipment mounting rails; Power and Cooling Solutions for PANDUIT Racks and Cabinets 84.0 in. H x 23.3 in. W x 23.2 in. D, 45RU PANDUIT PR34457V2-255154.eps 8 FT. RACK Anixter No. Vendor No. Description 355276 R4P96 #12-24 threaded equipment mounting rails; 96.1 in. H x 23.3 in. W x 30.2 in. D, 52RU 355277 R4P96CN Cage nut style equipment mounting rails; 96.1 in. H x 23.3 in. W x 30.2 in. D, 52RU 400014 R4P2396 #12-24 threaded equipment mounting rails; 96.0 in. H x 23.3 in. W x 23.2 in. D, 52RU 400016 R4P23CN96 Cage nut style equipment mounting rails; PANDUIT offers a large variety of power and thermal management products to 96.0 in. H x 23.3 in. W x 23.2 in. D, 52RU complete your rack or cabinet system. Please see the Power, Cooling and Environmental Monitoring section for more information. RACK ACCESSORIES Racks;Four-post/13454 Index1.Support and Supplies//Physical Support Structure//Racks Anixter No. Vendor No. Description 4-post Cable Management Rack System and Accessories 435281 RCSTR Four-post rack casters 334315 CNSPE End channel slack spool PANDUIT PR12089V2-21970.eps 358160 CVPDUB Vertical POU mounting brackets 365914 CVPPB Vertical-mount bracket for 1RU 19 in. patch panels to the side of the cabinet posts 327871 R4PWF Top trough 23.25 in. W x 7.0 in. D x 2.0 in. H 337714 CNWS1224-C 100 #12 to 24 cage nut and screws 400045 R4PRT #12-24 threaded equipment mounting rails; 7 ft. (sold in pairs) 400064 R4PRCN Cage nut style equipment mounting rails; The 4-post Rack combines the stability of a cabinet with the accessibility of an open 7 ft. (sold in pairs) rack to provide maximum flexibility of network layout, design and installation. Front 400067 R4PFP Vertical filler back panel; for 7 ft. racks and back mounting rails move independently of structural members allowing 400180 RSHLF Four-post shelf, 250 lb. load rating, 19 in. adjustment after the rack is installed. Rear rail construction provides a clear W x 30 in. D ventilation path for side ventilated switches. Rack unit identification allows for quick 400182 RSHLF23 Four-post shelf, 250 lb. load rating, 19 in. location of rack-mounted equipment. A fully bonded structure with a single point W x 23 in. D Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.73 Racks, Cabinets and Cable Management PANDUIT (continued) 4-post Cable Management Rack System and Accessories Anixter No. Vendor No. Description 443973 RNRV10 #12-24 threaded equipment mounting Anixter No. Vendor No. Description rails with front and rear manager, 84.0 in. 400181 RSHLF36 Four-post shelf, 250 lb. load rating, 19 in. H x 30.4 in. W x 15 in. D W x 36 in. D 443974 RWMPVF45E #12-24 threaded equipment mounting 288980 NF4PSHLF19 Four-post shelf, 250 lb. load rating, 19 in. rails with front only manager, 84.0 in. H x W x 32 in. D 25.5 in. W x 15 in. D 331612 NF4PSHLF19X23 Four-post shelf, 250 lb. load rating, 19 in. 443975 RWMPVHC45E #12-24 threaded equipment mounting W x 23 in. D rails with front only manager, 84.0 in. H x Racks;Two-post/2007 Index1.Support and Supplies//Physical Support Structure//Racks 27.4 in. W x 15 in. D Standard 19 in. Rack Racks;Accessories/13394 Index1.Support and Supplies//Physical Support Structure//Accessories PANDUIT PR29173V2-215816.eps PANDUIT Blanking Panels PANDUIT RACK FILLER PANELS PR12108V2-22017.eps Reserves rack space for future use. Directs airflow in cabinet applications. Mounts FEATURES to standard EIA 19 in. racks or cabinets. Includes mounting screws. • Sturdy aluminum construction Anixter No. Vendor No. Description • #12-24 Universal EIA mounting hole spacing 174598 DPFP1 1 rack space filler panel • Smooth, black finish D 174595 DPFP2 2 rack space filler panel • Individually printed rack space numbering 255069 DPFP4 4 rack space filler panel • Paint piercing washers included to electrically bond the rack for 242683 DPFP8 8 rack space filler panel simplified grounding • Assembly required TOOL-LESS BLANKING PANELS PR34472V2-255221.eps Anixter No. Vendor No. Description 351979 CMR19X96 EIA rack, aluminum, 96.1 in. H x 20.3 in. W x 3.0 in. D - 52RU 188864 CMR19X84 EIA rack, aluminum, 84.0 in. H x 20.3 in. W x 3.0 in. D - 45RU 174601 CMR19X47 EIA rack, aluminum, 48.0 in. H x 20.3 in. W x 3.0 in. D - 24RU Plastic tool-less blanking panel utilized to prevent bypass air. Mounts to standard 341708 CMR19X84NU EIA rack, aluminum, numbered up, EIA 19 in. racks or cabinets. 84.0 in. H x 20.3 in. W x 3.0 in. D - 45RU Anixter No. Vendor No. Description 418843 R2P6S EIA rack, steel, 6 in. channel, 84.0 in. H x 431618 TLBP1S-V 1 RU, for square hole applications (with 20.3 in. W x 6 in. D - 45RU or without cage nuts) 255086 S1224-C #12-24 x 0.5 in. screws, pack of 100 431619 TLBP2S-V 2 RU, for square hole applications (with 443968 RFAKIT Rack anchor kit for concrete floor (set or without cage nuts) of four) 432021 TLBP1R-V 1 RU, for round tapped hole applications 443969 RWMPV45ERW #12-24 threaded equipment mounting 432022 TLBP2R-V 2 RU, for round tapped hole applications rails with front and rear manager, 84.0 in. H x 25.5 in. W x 15 in. D 443970 RMPVHC45E #12-24 threaded equipment mounting rails with front and rear manager, 84.0 in. H x 27.4 in. W x 15 in. D 443971 RNRV6 #12-24 threaded equipment mounting rails with front and rear manager, 84.0 in. H x 27.1 in. W x 15 in. D Request the latest literature and guides from Anixter. 4.74 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management PANDUIT Racks;Accessories/13393 Shelves;Rack Shelves/13389 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Hinged Wall Brackets Rack-mount Shelves PANDUIT PR12107V2-22014.eps PANDUIT PR12103V2-22002.eps Mounts to wall or standard EIA 19 in. rack. Includes cable tie slots. Has standard SINGLE-SIDED SHELVES FOR 19 IN. STANDARD RACK 19 in. EIA hole spacing. Panel rotates from one side for easy access to cabling. Anixter No. Vendor No. Description Includes write-on labeling area and accepts 19 in. patch panels, horizontal cable 263434 SRM19FM1 Front-mount shelf, steel, 19.0 in. W x managers and equipment. 15.2 in. D x 1.7 in. H. Load rating 30 lb. 6 IN. DEEP WALL BRACKETS 264129 SRM19FM2 Front-mount shelf, steel, 19.0 in. W x Anixter No. Vendor No. Description 15.2 in. D x 3.5 in. H. Load rating 50 lb. 175674 WBH1 1 rack space, load rating 10 lb. DOUBLE-SIDED SHELVES FOR 19 IN. STANDARD RACK 169712 WBH2 2 rack space, load rating 20 lb. Includes two-piece shelf that mounts to front and back of EIA racks. 172208 WBH3 3 rack space, load rating 30 lb. Anixter No. Vendor No. Description 172209 WBH4 4 rack space, load rating 40 lb. 330452 SRM19CMV3 19 in. cantilevered shelf, vented 15 IN. DEEP WALL BRACKETS aluminum. Dimensions: 5.2 in. H x 19.2 in. W x 12.5 in. D (133 mm x Anixter No. Vendor No. Description 489 mm x 316 mm). Load rating 200 lb. 250762 WBH2E 2 rack units, load rating 20 lb. 287403 SRM19CM3 19 in. cantilevered shelf, aluminum. 250763 WBH4E 4 rack units, load rating 40 lb. Dimensions: 5.2 in. H x 19.0 in. W x 250764 WBH6E 6 rack units, load rating 60 lb. 12.5 in. D (132.1 mm x 482.6 mm x 317.5 mm). Load rating 200 lb. ADJUSTABLE SHELVES FOR 19 IN. STANDARD RACK Mounts to front and back of EIA racks. Anixter No. Vendor No. Description 342489 SRM19X18A1 19 in. adjustable mount shelf, steel, 19.0 in. W x 18.0 in. D x 1.8 in. H. Load rating 250 lb. 342426 SRM19X25A1 19 in. adjustable mount shelf, steel, 19.0 in. W x 25.0 in. D x 1.8 in. H. Load rating 250 lb. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.75 Racks, Cabinets and Cable Management PANDUIT Cable Management;Vertical/1780 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description PATCHRUNNER Vertical Cable Managers 355273 PRD1296 Dual hinged door, 12.0 in. W x 96 in. H 355272 PRD1096 Dual hinged door, 10.0 in. W x 96 in. H PANDUIT 355271 PRD896 Dual hinged door, 8 in. W x 96 in. H The PATCHRUNNER Vertical Cable Managers can be mounted to the sides of standard 355269 PRD696 Dual hinged door, 6 in. W x 96 in. H EIA 19 in. racks or between two adjacent racks. These versatile components can be used for multimedia applications including UTP, STP, coax and fiber optic cables. It is PATCHRUNNER ACCESSORIES excellent for use in copper applications with networking equipment. The unique Anixter No. Vendor No. Description design helps maintain proper cable bend radius. 301018 PRSP7 Plastic slack spool 7 in. D x 1.3 in. dia. 7 FOOT PR11251V2-25377.eps 301019 PRSP5 Plastic slack spool, 5 in. D x 1.3 in. dia. 287392 PREP End panel 14.4 in. W x .70 in. D 82.5 in. H 355275 PREP96 End panel 14.5 in. W x .70 in. D x 94.1 in. W 322207 CRTW Rack top trough with waterfall creates pathway above rack, for use with CMR19X84, PRV6, PRV8, PRV10, PRV12 and PRV15 Cable Management;Vertical/17538 Index1.Support and Supplies//Physical Support Structure//Accessories PATCHRUNNER High Capacity Vertical Cable Managers PANDUIT PR29166V2-215817.eps Molded design provides superior bend radius protection and higher capacity. Anixter No. Vendor No. Description 356189 PRV15 Front and rear, 15 in. W x 83.9 in. H, 45RU 355235 PRVF15 Front only, 15 in. W x 83.9 in. H, 45RU 278847 PRV12 Front and rear, 12 in. W x 83.9 in. H, 45RU 278850 PRVF12 Front only, 12 in. W x 83.9 in. H, 45RU D 341220 PRV10 Front and rear, 10 in. W x 83.9 in. H, 45RU 351859 PRVF10 Front only, 10 in. W x 83.9 in. H, 45RU PATCHRUNNER High Capacity Vertical Cable Managers provide a solution that 278848 PRV8 Front and rear, 8 in. W x 83.9 in. H, 45RU organizes, manages, protects and showcases cabling for the latest high-performance 278851 PRVF8 Front only, 8 in. W x 83.9 in. H, 45RU enterprise switching equipment. The wide and deep features of this vertical manager 278849 PRV6 Front and rear, 6 in. W x 83.9 in. H, 45RU are ideal for Category 6A cabling or other high-performance cabling. 288370 PRVF6 Front only, 6 in. W x 83.9 in. H, 45RU FEATURES 356190 PRD15 Dual hinged door 15.0 in. W • High-density minimizes area required for network layout freeing up valuable 278853 PRD12 Dual hinged door, 12.0 in. W floor space 341222 PRD10 Dual hinged door, 10 in. W • Allows mounting of many standard EIA 19 in. accessories, such as patch panels, 278854 PRD8 Dual hinged door, 8 in. W vertically in the manager 286202 PRD6 Dual hinged door, 6 in. W • Ventilated side walls provide maximum airflow for equipment cooling 323176 PRSHD12 Single hinged door 12 in. W • Snap-on finger sections can be removed to improve airflow and break away 323175 PRSHD8 Single hinged door 8 in. W fingers allow routing of large cable bundles • Large finger spacing accommodates up to 48 Cat 6A cables 327785 PRSHD6 Single hinged door 6 in. W • Optional sure close dual hinged metal doors provide easy access to vertical 8 FOOT pathway and provides visual and audible feedback on closure Anixter No. Vendor No. Description Anixter No. Vendor No. Description 355268 PRV1596 Front and rear, 15 in. W x 95.5 in. H, 45RU 417915 PEV12 Front and rear, 83.5 in. H x 12 in. W x 355265 PRVF1596 Front only, 15 in. W x 95.5 in. H, 45RU 28.1 in. D, 45 RU 355267 PRV1296 Front and rear, 12 in. W x 95.5 in. H, 45RU 417918 PEVF12 Front only, 83.5 in. H x 12 in. W x 355234 PRVF1296 Front only, 12 in. W x 95.5 in. H, 45RU 15.9 in. D, 45 RU 355266 PRV1096 Front and rear, 10 in. W x 95.5 in. H, 45RU 425530 PEV10 Front and rear, 83.5 in. H x 10 in. W x 355233 PRVF1096 Front only, 10 in. W x 95.5 in. H, 45RU 28.1 in. D, 45 RU 355242 PRV896 Front and rear, 8 in. W x 95.5 in. H, 45RU 425534 PEVF10 Front only, 83.5 in. H x 10 in. W x 355232 PRVF896 Front only, 8 in. W x 95.5 in. H, 45RU 15.9 in. D, 45 RU 355241 PRV696 Front and rear, 6 in. W x 95.5 in. H, 45RU 425531 PEV8 Front and rear, 83.5 in. H x 8 in. W x 28.1 in. D, 45 RU 355231 PRVF696 Front only, 6 in. W x 95.5 in. H, 45RU 355274 PRD1596 Dual hinged door, 15.0 in. W x 96 in. H Request the latest literature and guides from Anixter. 4.76 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management PANDUIT Cable Management;Vertical/17543 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description 418816 PEVF8 Front only, 83.5 in. H x 8 in. W x NETRUNNER High Capacity Vertical Cable Managers 15.9 in. D, 45 RU PANDUIT PR29186V2-216053.eps 425532 PEV6 Front and rear, 83.5 in. H x 6 in. W x 28.1 in. D, 45 RU 418815 PEVF6 Front only, 83.5 in. H x 6 in. W x 15.9 in. D, 45 RU ACCESSORIES Anixter No. Vendor No. Description 425538 PED12 Dual-hinged metal door, 12.1 in. W 425541 PED10 Dual-hinged metal door, 10.1 in. W 425542 PED8 Dual-hinged metal door, 8.1 in. W 425543 PED6 Dual-hinged metal door, 6.1 in. W FEATURES 443979 PEDK12 Bracket kit for PED12 • Large finger openings accommodate up to 24 Category 6A cables 443978 PEDK10 Bracket kit for PED10 • Integral cable retainers on the end of each finger help contain cables within 443977 PEDK8 Bracket kit for PED8 each rack unit 443976 PEDK6 Bracket kit for PED6 • Bend radius fingers align with rack spaces to support cables as they transition to the vertical pathway Cable Management;Vertical/17541 Index1.Support and Supplies//Physical Support Structure//Accessories • Push button dual-hinged doors ordered separately can be opened to the left or NETRUNNER Vertical Cable Managers right to provide complete access to the cables inside the vertical pathway • Snap-on cable retainers can be placed onto fingers to help retain cables in PANDUIT PR11252V2-25374.eps channel during installation and maintenance • Vertical managers include cable retainers, mounting brackets and #12-24 screws • Zero RU mounting capability expands the functionality of the vertical manager Anixter No. Vendor No. Description 425556 NRV12 Front and rear, 80.4 in. H x 12 in. W x 13.8 in. D 425555 NRVF12 Front only, 80.4 in. H x 12 in. W x 7.48 in. D 399453 NRV10 Front and rear, 80.4 in. H x 10 in. W x 13.8 in. D 425553 NRVF10 Front only, 80.4 in. H x 10 in. W x 7.48 in. D 399454 NRV6 Front and rear, 80.4 in. H x 6.7 in. W x FEATURES 13.8 in. D • Large finger openings accommodate up to 24 Category 6 cables 414574 NRVF6 Front only, 80.4 in. H x 6.7 in. W x 7.48 in. D • Integral cable retainers on the end of each finger to help contain cables within 425557 NRD12 Dual-hinged metal door, 12.7 in. W x 82.8 in. H each rack unit 399859 NRD10 Dual-hinged metal door, 10.7 in. W x 82.8 in. H • Bend radius fingers align with rack spaces to support cables as they transition 399860 NRD6 Dual-hinged metal door, 7.4 in. W x 82.8 in. H to the vertical pathway 425558 NREP End panel, includes two panel sections to cover • Dual hinged covers can be opened 110° to the left or right to provide complete 45RU on one side access to the cables inside the vertical pathway 314583 WMPVSMK Side-mount kit • Snap-on cable retainers can be placed onto fingers to help retain cables in 393564 WMPV45ERTW Rack top trough with waterfall, creates pathway channel during installation and maintenance above rack • Vertical managers include hinged covers, cable retainers, mounting brackets and #12-24 screws 393244 WR5E-X Snap-on finger cable retainers 301019 PRSP5 Plastic slack spool, 5 in. D x 1.3 in. dia. Anixter No. Vendor No. Description 310337 WMPV22E Front and rear, 4.9 in. W x 40.25 in. H, 22RU 310338 WMPVF22E Front only, 4.9 in. W x 40.25 in. H, 22RU 310334 WMPV45E Front and rear, 83.0 in. H x 4.9 in. W x 12.0 in. D, 45RU 310336 WMPVF45E Front only, 4.9 in. W x 80.4 in. H, 45RU 310346 WMPVHC45E Front and rear, 5.7 in. W x 80.4 in. H, 45RU 310347 WMPVHCF45E Front only, 5.7 in. W x 80.4 in. H, 45RU 310344 WMPVCBE Center-mount kit 314583 WMPVSMK Side-mount kit 331634 WMPV45EP End panel 12 in. W x 0.70 in. D x 82.5 in. H Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.77 Racks, Cabinets and Cable Management PANDUIT Cable Management;Horizontal/1779 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description Horizontal Cable Management System 265697 WMPFSE 1.7 in. H x 19.0 in. W x 3.7 in. D (44 mm x 483 mm x 94 mm) - 1 RU PANDUIT PR20044V2-67713.eps 265139 WMPF1E 3.5 in. H x 19.0 in. W x 3.7 in. D (89 mm x 483 mm x 94 mm) - 2 RU 265137 WMPHF2E 3.5 in. H x 20.2 in. W x 3.7 in. D (89 mm x 573 mm x 94 mm) - 2 RU 443981 WMP1E-V 3.5 in. H x 19.0 in. W x 8.9 in. D (89 mm x 483 mm x 226 mm) - 2 RU. Package of 5 443982 WMPF1E-X 3.5 in. H x 19.0 in. W x 3.7 in. D (89 mm x 483 mm x 94 mm) - 2 RU. Package of 10 443983 WMPSE-X 1.7 in. H x 19.0 in. W x 8.9 in. D (44 mm x The Horizontal Cable Management System provides a neat and efficient means for 483 mm x 226 mm) - 1 RU. Package of 10 routing and protecting cables on telecommunications racks. When mounted to 443984 WMPFSE-E 1.7 in. H x 19.0 in. W x 3.7 in. D (44 mm x standard EIA 19 in. racks, these versatile components can be used for multimedia 483 mm x 94 mm) - 1 RU. Package of 20 applications including UTP, STP, coax or fiber optic cables. The unique designs help maintain proper cable bend radius. OPEN ACCESS HORIZONTAL CABLE MANAGERS - 1U Constructed of a steel panel with PVC D-Rings attached. Mounts to 19 in. rack or NETMANAGER HIGH CAPACITY HORIZONTAL CABLE MANAGERS PR9715V2-15292.eps cabinet. Includes mounting screws. There is an optional snap-on cover. Anixter No. Vendor No. Description 221614 CMPH1 1.7 in. H x 19.0 in. W x 8.6 in. D 221616 CMPHF1 1.7 in. H x 19.0 in. W x 3.4 in. D 221617 CMPHHF1 1.7 in. H x 19.0 in. W x 5.7 in. D 287197 CMPH1C Snap-on cover for 1RU D-Ring panels, width 19.4 in. HORIZONTAL D-RING PANELS - 2U PR12100V2-25575.eps 19 in. high-capac D ity manager, front and rear/front only Anixter No. Vendor No. Description 351953 NM1 1.7 in. x 13.1 in. front and rear - 1U 351954 NM2 3.5 in. x 13.1 in. front and rear - 2U 351955 NM3 5.2 in. x 13.1 in. front and rear - 3U 351956 NM4 7.0 in. x 13.1 in. front and rear - 4U 351957 NMF1 1.7 in. x 6.2 in. front only - 1U 348020 NMF2 3.5 in. x 6.2 in. front only - 2U 351959 NMF3 5.2 in. x 6.2 in. front only - 3U 351960 NMF4 5.2 in. x 6.2 in. front only - 3U Constructed of a steel panel with PVC D-Rings attached. Mounts to 19 in. rack or cabinet. Includes mounting screws. There is an optional snap-on cover. PATCHLINK HORIZONTAL CABLE MANAGERS PR12099V2-25569.eps Anixter No. Vendor No. Description 204326 CMPH2 3.5 in. H x 19.0 in. W x 8.6 in. D 204328 CMPHF2 3.5 in. H x 19.0 in. W x 3.4 in. D 204329 CMPHH2 3.5 in. H x 19.0 in. W x 5.7 in. D 235910 CMPH2C Snap-on cover for 2 RU D-ring panels, width 19.4 in. Mounts to 19 in. rack or cabinet. Includes mounting screws and covers. Anixter No. Vendor No. Description 265696 WMPSE 1.7 in. H x 19.0 in. W x 8.9 in. D (44 mm x 483 mm x 226 mm) - 1 RU 265138 WMP1E 3.5 in. H x 19.0 in. W x 8.9 in. D (89 mm x 483 mm x 226 mm) - 2 RU 265136 WMPH2E 3.5 in. H x 20.2 in. W x 8.9 in. D (89 mm x 513 mm x 226 mm) - 2 RU Request the latest literature and guides from Anixter. 4.78 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management PANDUIT Cable Management;Horizontal/13387 Cable Management;Accessories/13392 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories High Capacity Horizontal Cable Managers Rack-mount Cable Management Accessories PANDUIT PR12101V2-21996.eps PANDUIT PR12106V2-22011.eps Manage cables on switches with vertical cards, curved cable management fingers Bend radius control fingers support cables as they transition to the vertical pathway. support cables as they transition to the vertical pathway, can be used to create cable Finger spacing aligns with rack units. Attaches to patch panels or equipment pathways for routing cable. Steel hinged cover provides easy access to pathway, mounting screws. Lightweight plastic construction provides durability and pass-through holes on top and back of manager, mounts to 19 in. EIA racks and easy installation. cabinets, mounting hardware included. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 314585 CMBRC1 Bend radius control clip, kit of two, 0.8 in. 250754 NCMHAEF4 Cable manager for vertical blade W x 3.0 in. D x 1.7 in. H switches, 4U 314584 CMBRC1E Bend radius control clip, kit of two, 1.0 in. 262393 NCMHAEF2 Cable manager for vertical blade W x 5.1 in. D x 1.7 in. H switches, 2U 250766 CMBRC5E Bend radius control fingers, 1.0 in. W x 5.1 in. D x 8.7 in. H Cable Management;Horizontal/13388 Index1.Support and Supplies//Physical Support Structure//Accessories 250765 CMBRC5 Bend radius control fingers, 1.0 in. W x Cable Routing Troughs 3.3 in. D x 8.75 in. H PANDUIT PR12102V2-21999.eps Cable Management;Horizontal/10673 Index1.Support and Supplies//Hardware and Supplies//Premise Applications Strain Relief Bars for Patch Panels PANDUIT The cable strain relief bar is ideal for high-density patch panels to support excess cables. It extends 2 in. off the back of the rack to support cables in punch-down or modular applications. Mounts to standard TIA/EIA 19 in. rack. Anixter No. Vendor No. Description 289426 SRBM19BLY Cable strain relief bar manager; attaches to rack to support cables in punch-down or modular applications Provide pathways to route cables in a rack line-up. 246045 SRB19BLY Cable strain relief bar supports cables in Anixter No. Vendor No. Description punch-down or modular patch 222857 CMLT19 Lower trough with 1.3 in. bend radius panel applications mounts to the bottom of a rack 19.0 in. W 304821 SRBS19BL-XY Cable strain relief bar supports cables in x 4.5 in. D x 8.0 in. H - 4RU punch-down or modular applications 222859 CMUT19 Upper trough with 1.3 in. bend radius 336890 SRBBRKT Quick release brackets for strain relief mounts to the top of a rack 19.0 in. W bars; converts conventional screw x 4.5 in. D x 3.5 in. H - 2RU mounting of strain relief bar to quick 330458 CMT4 Cable routing trough 19 in. W x 4.5 in. D release mounting/removal x 6.9 in. H - 4RU Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.79 Racks, Cabinets and Cable Management PANDUIT Cable Management;Vertical/2562 Index1.Support and Supplies//Physical Support Structure//Accessories IN-CABINET Cable Management System PANDUIT The PANDUIT IN-CABINET system is designed to properly manage and organize patch cords and distribution cables within the majority of cabinet designs. Applications include UTP, STP, coax and fiber optic cables. This system can be used with all PAN-NET products and with a variety of PANDUIT wiring accessories. SIDE-MOUNTED VERTICAL PANELS - FINGER DUCT Available for cabinets 27 in. or wider. Duct fingers have score lines for easy removal. Snap-on covers included. Anixter No. Vendor No. Description 221606 CWMPV3440 71.9 in. H x 3.5 in. W x 4.3 in. D 221608 CWMPV2440 71.9 in. H x 2.5 in. W x 4.3 in. D FRONT-MOUNTED VERTICAL PANELS - FINGER DUCT Available for cabinets 27 in. or wider. Finger ducts have score lines for easy removal. Anixter No. Vendor No. Description 221612 CWMPV2340 70 in. H x 3.7 in. W x 3.3 in. D 221610 CWMPV3340 70 in. H x 4.7 in. W x 3.3 in. D Cable Management;Vertical/1996 Index1.Support and Supplies//Physical Support Structure//Accessories Cable Management Brackets PANDUIT PR9695V2-15233.eps D PANDUIT Vertical Cable Management D-rings manage cable within an open access rack. Front arm rotates to allow the entire cable bundle to be inserted. Anixter No. Vendor No. Description 218409 CMVDR1 1.18 in. W x 4.8 in. D Vertical Cable Management D-ring 281014 CMVDR1S 1.18 in. W x 2.4 in. D Vertical Cable Management D-ring 233025 CMVDR2 2.4 in. W x 4.8 in. D Vertical Cable Management D-ring 547467 CMVDR2S 2.4 in. W x 2.4 in. D Vertical Cable Management D-ring Request the latest literature and guides from Anixter. 4.80 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Rittal ./Cabinets;Free-standing, Network/3827 Cabinets;Free-standing, Server/3828 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets TS8 Network Cabinets TS8 Server Cabinets RITTAL CORP pr5394V2-17093.eps RITTAL CORP PR23851V2-168766.eps Network cabinet with fully perforated split rear doors and a tinted polycarbonate Server cabinet with fully perforated front door and split rear doors, 19 in. server front door with perimeter perforations, 19 in. server angles front and rear, comfort angles front and rear, comfort handle with push-button lock insert, vented roof with handle with push-button lock insert, vented roof with four round holes for cable entry. four round holes for cable entry. Leveling feet included, but shipped uninstalled. Leveling feet included, but shipped uninstalled. Versions available in gray and black. Versions available in gray and black. Sidewalls ordered separately. Sidewalls sold separately. 24U CABINET SERIES 24U CABINETS Anixter No. Vendor No. Description Anixter No. Vendor No. Description 314184 9969816 48 in. x 24 in. x 36 in., light gray 314176 9969858 48 in. x 24 in. x 32 in., light gray 314185 9969817 48 in. x 24 in. x 36 in., black 314177 9969859 48 in. x 24 in. x 32 in., black 314186 9969830 48 in. x 24 in. x 40 in., light gray 314178 9969860 48 in. x 32 in. x 32 in., light gray 314187 9969831 48 in. x 24 in. x 40 in., black 314179 9969861 48 in. x 32 in. x 32 in., black 314188 9969844 48 in. x 24 in. x 42 in., light gray 314189 9969845 48 in. x 24 in. x 42 in., black 42U CABINETS Anixter No. Vendor No. Description 42U CABINET SERIES 314180 9969862 80 in. x 24 in. x 32 in., light gray Anixter No. Vendor No. Description 314181 9969863 80 in. x 24 in. x 32 in., black** 314191 9969819 80 in. x 24 in. x 36 in., black 314182 9969864 80 in. x 32 in. x 32 in., light gray 314193 9969821 80 in. x 28 in. x 36 in., black 314183 9969865 80 in. x 32 in. x 32 in., black** 314195 9969823 80 in. x 32 in. x 36 in., black **Available in Rittal Xpress 1 Day Program 314197 9969833 80 in. x 24 in. x 40 in., black** 314199 9969835 80 in. x 28 in. x 40 in., black** TS SIDEWALLS FOR NETWORK CABINETS 314201 9969837 80 in. x 32 in. x 40 in., black Anixter No. Vendor No. Description 314203 9969847 80 in. x 24 in. x 42 in., black** 378156 9969949 48 in. x 32 in., black 314205 9969849 80 in. x 28 in. x 42 in., black** 276381 8175235 48 in. x 32 in., light gray 314207 9969851 80 in. x 32 in. x 42 in., black** 354246 9969916 80 in. x 32 in., black 378186 9969909 80 in. x 24 in. x 48 in., black 276375 8108235 80 in. x 32 in., light gray 378187 9969911 80 in. x 32 in. x 48 in., black **Available in Rittal Xpress 1 Day Program 47U CABINET SERIES Anixter No. Vendor No. Description 314209 9969825 88 in. x 24 in. x 36 in., black 314211 9969839 88 in. x 24 in. x 40 in., black** 328267 9969841 88 in. x 28 in. x 40 in., black** 314213 9969853 88 in. x 24 in. x 42 in., black** 328198 9969855 88 in. x 28 in. x 42 in., black** 378188 9969913 88 in. x 24 in. x 48 in., black** 378189 9969915 88 in. x 32 in. x 48 in., black **Available in Rittal Xpress 1 Day Program Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.81 Racks, Cabinets and Cable Management Rittal Cabinets;Free-standing, Network/12359 Index1.Support and Supplies//Physical Support Structure//Cabinets (continued) TS8 Server Cabinets TE7000 Network Cabinets TS SIDEWALLS FOR NETWORKING AND SERVER CABINETSPR20513V2-77646.eps RITTAL CORP PR11216V2-18355.eps Anixter No. Vendor No. Description Networking cabinet with 19 in. depth adjustable frame structures, mounted front and 328199 9969952 48 in. x 40 in., black rear between the roof and base, locking safety glass front door and locking solid 328192 9969953 48 in. x 42 in., light gray sheet steel rear door, locking sidewalls, cable entry through the roof or base, leveling 328201 9969954 48 in. x 42 in., black feet included, but shipped uninstalled. Available in gray and black. 281131 9968596 80 in. x 40 in., black** Anixter No. Vendor No. Description 328202 9969351 80 in. x 42 in., black** 300578 7000440 47.24 in. x 23.62 in. x 31.5 in., gray 378191 9969956 80 in. x 48 in., black 314027 7000505 78.74 in. x 23.62 in. x 23.62 in., black 328203 9968594 88 in. x 40 in., black** 300584 7000510 78.74 in. x 23.62 in. x 31.5 in., gray 328204 9969355 88 in. x 42 in., black** 300585 7000530 78.74 in. x 31.5 in. x 31.5 in., gray 378190 9969958 88 in. x 48 in., black 314028 7000570 86.61 in. x 23.62 in. x 31.5 in., gray **Available in Rittal Xpress 1 Day Program Cabinets;Free-standing, Server/16485 Index1.Support and Supplies//Physical Support Structure//Cabinets Also available in light gray (RAL7035). For more information Colocation Cabinets contact your sales representative. D RITTAL CORP PR23848V2-168746.eps Cabinets;Accessories/17906 Index1.Support and Supplies//Physical Support Structure//Cabinets Cooling Solutions for Rittal Cabinets RITTAL CORP PR12028V2-21850.eps Rittal's colocation rack enclosures are engineered to meet the intensive physical security demands of today's colocation applications with durable construction, doors with two-point latching, internal hinges, locking handles and secure cable management - all standard features on one-, two-, three- and four-door Rittal offers a large variety of thermal management products to complete your configurations, and all in a 47U H x 600 mm W x 1,050 mm D footprint. cabinet system. Please see the Power, Cooling and Environmental Monitoring section They are optimized for the steadily growing power and cooling requirements of higher for more information. density installations featuring fully perforated doors to allow maximum airflow and secure cable management made to accommodate larger cables and cord sets. They are designed with a premium blend of aesthetically pleasing style and enhanced performance - a combination that delivers more quality and value for the money than competitor offerings and makes them ideal both as showpieces and as highly functional solutions for any colocation environment. COLOCATION CABINETS Anixter No. Vendor No. Description 398164 9963770 47U x 24 in. W x 42 in. D, two door cabinet with two 21U compartments Request the latest literature and guides from Anixter. 4.82 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Rittal Cabinets;Accessories/15575 Index1.Support and Supplies//Physical Support Structure//Cabinets Anixter No. Vendor No. Description 398167 9963771 47U x 24 in. W x 42 in. D, three door TS Partition Walls for Networking and Server Cabinets cabinet with three 14U compartments RITTAL CORP PR22646V2-137510.eps 398168 9963772 47U x 24 in. W x 42 in. D, four door cabinet with four 10U compartments ACCESSORIES Cable security kit provides secure cable pass-through between compartments. Anixter No. Vendor No. Description 400003 9962840 Cable security kit, two door 400004 9962841 Cable security kit, three door 400005 9962842 Cable security kit, four door 400006 9963601 Comfort security handle For side partitioning of bayed TS server or networking enclosures. Installs without the need for additional hardware or tools. Includes four 4.41 in. cable pass-through Cabinets;Wall-mount/902 Index1.Support and Supplies//Physical Support Structure//Cabinets holes and grommet covers. Three-part Wall-mounted Cabinets Anixter No. Vendor No. Description RITTAL CORP PR6468V2-17147.eps 378203 9971041 80 in. x 36 in., black 378204 9971042 80 in. x 40 in., black 378205 9971043 80 in. x 42 in., black 378206 9971044 80 in. x 48 in., black 377299 9971045 88 in. x 36 in., black 378207 9971046 88 in. x 40 in., black 378208 9971047 88 in. x 42 in., black 378209 9971048 88 in. x 48 in., black Cabinets;Accessories/15573 Index1.Support and Supplies//Physical Support Structure//Cabinets TS Cabinet Accessories Each of the wall-mounted network cabinet standard models feature usable panel RITTAL CORP PR23841V2-168772.eps heights from 10.5 in. to 36.8 in. to ensure protection of sensitive electronic components from the environment and unauthorized access. Order captive nuts (Part No. 156362) and screws (Part No. 156363) separately. Color: light gray with dark gray trim. FEATURES • Rear housing with removable solid top cover and bottom cable entry with brushes • Two vertical system bars Image shown above is the Button Mount Bracket for dual PDUs. • Cable collecting rail • Center swing frame with lock and one set of 19 in. rails Anixter No. Vendor No. Description • Front viewing door with lock 263627 8800490 TS8 Baying Kit: used to join together two • Two filters or more TS Series cabinets, six bolts • Adjustable 19 in. rails per set • Top and bottom cable entry 266186 9968837 Support Rails: designed to support • Wall-mount brackets components from underneath, rated at • Grounding rail 200 lb. load • Can provide NEMA 12 protection with the use of 2235135 solid gland plates 263628 9968751 TS8 Caster Kit: includes hardware, left Anixter No. Vendor No. Description Useable Height and right fixed casters and two swivel 266181 7709735 19 in. x 24 in. x 22.5 in. 9U (15.75 in.) casters, combined load capacity of 266182 7715735 29 in. x 24 in. x 22.5 in. 15U (26.25 in.) 2,500 lb. 266183 7721735 40 in. x 24 in. x 22.5 in. 21U (36.75 in.) 378199 9970989 TS8 Bolt Down Kit: for anchoring enclosures to the floor at any position on 378197 7709535 19 in. x 24 in. x 26.5 in. 9U (15.75 in.) the base frame, quantity four, black 227132 7715035 29 in. x 24 in. x 26.5 in. 15U (26.25 in.) 378198 7721535 40 in. x 24 in. x 26.5 in. 21U (36.75 in.) Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.83 Racks, Cabinets and Cable Management Rittal Cabinets;Accessories/914 Index1.Support and Supplies//Physical Support Structure//Accessories (continued) TS Cabinet Accessories Blank Panels Anixter No. Vendor No. Description 363520 9971066 Button Mount Brackets: enables the RITTAL CORP PR23842V2-168755.eps tool-less installation of a single PDU into the TS8 cabinets, quantity two, black 374549 9971067 Button Mount Brackets: enables the tool-less installation of dual PDUs into the TS8 cabinets, quantity two, black Cabinets;Accessories/15574 TOOL-LESS BLANKING PANELS Index1.Support and Supplies//Physical Support Structure//Cabinets These tool-less blanking panels mount to the 19 in. rails to cover open areas. Wall-mount Cabinet Accessories Anixter No. Vendor No. Description RITTAL CORP PR23846V2-168752.eps 398169 9960676 1.75 in. H, 1U, plastic, black, pack of ten 398170 9970138 3.5 in. H, 3U, plastic, black, pack of five DK SERIES BLANK PANELS This mounts directly to the 19 in. rails to cover the open areas, patch panels or equipment. Pack of two. Anixter No. Vendor No. Description 266299 7151035 1.75 in. high, 1U, RAL7035, light gray 266301 7152035 3.5 in. high, 2U, RAL7035, light gray 266302 7153035 5.25 in. high, 3U, RAL7035, light gray 266303 7156035 10.5 in. high, 6U, RAL7035, light gray Anixter No. Vendor No. Description Racks;Two-post/908 266923 2508000 Cabinet Wall-mount Bracket: aids in Index1.Support and Supplies//Physical Support Structure//Racks mounting the enclosure to the wall, nickel DK Series Data Racks plates, pack of four RITTAL CORP PR11057V2-18055.eps D 156384 7705035 Cable Entry Panel: for use with Rittal wall-mounted cabinets, brush 277436 2235135 Cable Entry Panel: for use with Rittal wall-mounted cabinets, solid 163615 2250000 Support Chassis: mounts off of the 19 in. rails to support heavy equipment, package of ten Cabinets;Accessories/1196 Index1.Support and Supplies//Physical Support Structure//Accessories Installation Hardware RITTAL CORP PR22644V2-137502.eps The free-standing steel Rittal DK Series Data Rack offers custom-made solutions for network equipment. More than just a relay rack, it can be used as a standalone unit, be bolted to the floor or mounted on sturdy wheels. An additional frame can be added for additional packaging density. Features include a fully welded, sturdy frame and superior cable management. Assembles in just minutes using four nuts and bolts. The standard rack includes 19 in. vertical frame and base with integrated feet. Captive Nuts (Part No. 156362) and screws (Part No.156363) must be ordered separately. Additional 19 in. frames are also available. DK SERIES DATA RACK Color: light gray frame, teal feet and top cover Nom. Dimensions Anixter No. Vendor No. Description Anixter No. Vendor No. (H x W x D) Useable Height 156331 9957324 10/32 cage nut 193126 7391000 59 in. x 22 in. x 30 in. 31U (54.3 in.) 156362 2092200 M6 captive nut 193127 7396000 68 in. x 22 in. x 30 in. 36U (63.0 in.) 156361 2094200 M6 cage nut grounded 193128 7400000 75 in. x 22 in. x 30 in. 40U (70.0 in.) 156363 2093200 M6 slotted screw 193129 7445000 84 in. x 22 in. x 30 in. 45U (78.8 in.) 156360 2089000 M6 Phillips-head screw Request the latest literature and guides from Anixter. 4.84 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Racks, Cabinets and Cable Management Rittal ADDITIONAL 19 IN. MOUNTING FRAMES UNIVERSAL SHELVES PR23845V2-168745.eps Color: light gray frame, teal feet and top cover Nom. Dimensions Anixter No. Vendor No. (H x W x D) Useable Height 193130 7296000 57 in. x 22 in. x 1 in. 31U (54.3 in.) 193131 7297000 66 in. x 22 in. x 1 in. 36U (63.0 in.) 193132 7298000 73 in. x 22 in. x 1 in. 40U (70.0 in.) 193133 7299000 82 in. x 22 in. x 1 in. 45U (78.8 in.) This is a 2U 19 in. rack-mount shelf. Depth: 12 in. Now offered in light CASTERS gray (RAL7035). Anixter No. Vendor No. Description Anixter No. Vendor No. Description 156377 7495000 Casters (pack of four) 222881 7148035 2U rack-mount shelf 156390 7051000 Telescopic slides for component shelves SHELVES Mounts directly to the two vertical frames. Designed to fit between 19 in. DK rails. RACK-MOUNT SHELVES PR20512V2-77644.eps Now in light gray (RAL7035). Anixter No. Vendor No. Description 197761 7144035 16 in. W x 16 in. D, light gray 197762 7145035 16 in. W x 20 in. D, vented, light gray Shelves;Rack and Cabinet Shelves/10137 Index1.Support and Supplies//Physical Support Structure//Accessories Rack and Cabinet Shelves RITTAL CORP This is a 2U, 19 in., static rack-mount shelf. Offered in light gray (RAL7035). TOOL-LESS SHELVES PR6467V2-17144.eps Maximum load capacity 55 lb. Anixter No. Vendor No. Description 266178 7119250 19 in. x 2U x 10 in. 218873 7119400 19 in. x 2U x 16 in. 400012 9963499 Heavy-duty support rails, 1U, extend from 22.07 in. to 30 in., two per pack Cable Management;Cable Rings/913 Index1.Support and Supplies//Physical Support Structure//Accessories Cable Rings RITTAL CORP PR29081V2-215269.eps These 19 in. rack-mount shelves are designed for your ease; the tool-less advantage allows quick and simple assembly. Anixter No. Vendor No. Description 263614 9968421 Fixed, light gray 260102 9968422 Fixed, black 266468 9968556 Fixed, light gray, heavy duty 266469 9968557 Fixed, black, heavy duty 266470 9968586 Telescopic, light gray, heavy duty Anixter No. Vendor No. Description 266471 9968587 Telescopic, black, heavy duty 378810 9961780 Quarter turn D-Ring, 3.5 in. x 5.0 in., 10/pack 400013 9961779 Quarter turn D-Ring, 1.8 in. x 3.5 in., 10/pack 156403 7112000 Metal cable ring, 3.2 in. x 1.6 in., 10/pack 266165 7111900 Metal cable ring, 4.7 in. x 3.1 in., 10/pack 156402 7111000 Metal cable ring, 4.7 in. x 2.4 in., 10/pack Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.85 Racks, Cabinets and Cable Management Rittal Cable Management;Vertical and Horizontal/12282 Index1.Support and Supplies//Physical Support Structure//Cabinets TOOL-LESS CABLE MANAGEMENT PR29083V2-215265.eps Manage IT Cable Management for TS8 Enclosures RITTAL CORP Cable management system to be used with TS8 enclosures. Tool-less single row cable management also available. FEATURES • Bend radius compliant per ANSI/TIA; round edges prevent performance degradation and damaged cables • Front and rear cable management capabilities allow separation of distribution cables and patch cords Anixter No. Vendor No. Description • Easy assembly reduces installation time 425306 9963600 Tool-less 18U single row cable • Modular 9U sections allow for custom configurations management, two/pk • 1RU cable guides align to cabinets' RU spacing for ease of installation and maintenance Cable Management;Horizontal/15576 Index1.Support and Supplies//Physical Support Structure//Accessories • Cover retainers hinge left or right and can be removed for easy access TS8 Overhead Cable Management • Pass-through ports for front/rear cable routing • Vertical cable manager kit includes: one base plate, two cable guides, two cable RITTAL CORP PR22650V2-137507.eps retainers, six M5.5 self-tapping screws, two mounting brackets, two cap plugs (9969595, 9969598 only) • Horizontal cable manager kit includes: one base plate, two cable guides, one hingeable/removable cover, four mounting screws, four spacers CABLE MANAGEMENT PR23844V2-168760.eps D The TS8 Overhead Cable Management system is designed to easily mount on top of TS8 enclosures, eliminating the need for for overhead ladder systems. FEATURES • Tool-less installation • Integrated 25 mm hole pattern accepts a variety of cable management Anixter No. Vendor No. Description accessories such as quarter-turn cable collection claws and quarter-turn Velcro 307499 9969.593 Vertical 9U cable manager for use with managers, allowing for separation of power and data cables in one trough 23.62 in. wide bayed cabinets or • Integrated grounding provisions 27.55 in. to 31.5 in. standalone cabinets • Large openings for cable pass-through • Available in three widths 314030 9969595 Vertical 9U cable manager for use with 27.55 in. wide bayed cabinets Anixter No. Vendor No. Description 280191 9969.598 Vertical 9U cable manager for use with 378211 9970254 Roof-mount cable manager for 24 in. wide TS 31.5 in. wide bayed cabinets enclosure, black 307500 9969597 Horizontal 2U rack-mount manager kit 378212 9970256 Roof-mount cable manager for 28 in. wide TS with cover, two/pk enclosure, black 328212 9969736 Horizontal 1U rack-mount manager kit 378213 9970258 Roof-mount cable manager for 32 in. wide TS with cover, two/pk enclosure, black 328205 9969594 Cover for 9969593, four/pk 378214 9970264 Roof-mount cable manager with ladder rack 328206 9969596 Cover for 9969595 and 9969598, four/pk provision for 24 in. wide TS enclosure, black 319158 9969600 Quarter-turn cable collection claw, qty. 378215 9970266 Roof-mount cable manager with ladder rack 10. May be used any place in the cabinet provision for 28 in. wide TS enclosure, black where the 25 mm hole pattern is available 378216 9970268 Roof-mount cable manager with ladder rack 328209 9969599 Quarter-turn hook-and-loop manager, qty. provision for 32 in. wide TS enclosure, black 10. May be used any place in the cabinet 378217 9970260 End covers, black where the 25 mm hole pattern is available 378218 9970270 Ladder rack adapter for cross aisle 331471 9969601 Cable slack spool, qty. 10 configuration, black 378219 9970271 12 in. W x 10 ft. L ladder rack, black Request the latest literature and guides from Anixter. 4.86 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Cabinet Locking Systems TZ ./Cabinets;Locking Systems/16252 Cabinets;Locking Systems/17396 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets TZ Praetorian Locking System TZ Praetorian Junction TZ - TELEZYGOLOGY INC PR29248V2-216368.eps TZ - TELEZYGOLOGY INC PR29244V2-216367.eps The TZ Praetorian Junction interprets relay output from enterprise access control systems and responds with the status of other system components. The TZ Praetorian The TZ Praetorian system solution is designed to work with existing third-party Junction provides data communication and power to one or two TZ Praetorian Triggers building access control systems to extend physical security and audit trail capability and either 12 or 24 RJ45 ports that connect to TZ locking devices through down to the cabinet enclosure level. A single swipe of the same ID card used for structured cabling. building access provides timed authorization to nominated cabinet doors, together The TZ Praetorian Junction also provides pluggable screw terminal blocks for either with discrete event monitoring and system access reporting. The system is scalable 12 or 24 connections to the I/O cards of access control systems. It can also be through simple industry-standard connections between TZ components and the mounted in a 19 in. 1U rack space, wall, shelf, or anywhere else convenient to the access control system to manage any number of enclosures. Cabinet door access access controller and a structured cable patch panel. Patents pending. across multiple cabinets can be readily managed through the multi-cabinet trigger box with integrated status indication for quick security status identification. The contents of the box: The system includes three main components: TZ Praetorian Junction, TZ Praetorian -One TZ Junction Trigger and the TZ SlideHandle intelligent locking device. -Twelve Wago 4-pin connectors 734-204 (24 for model 7141AF) TZ Praetorian system components have been tested and certified to meet harmonized -Two 1U rack-mount brackets and hardware global standards per IEC/UL/CSA 60950-1. -One IEC power cord FEATURES -Five Wago connector operating levers 734-230 • Authorized timed access to multiple doors with a single card presentation -One TZ Praetorian system manual • Compatible with standard structured cabling for 100 m length Note: Rack mounting fasteners not included • Wide range of input voltages FEATURES • Fast and easy mounting of locking components • Visual indication and reporting of secured and unsecured states and true • Compatible with structured cabling standards for 100 m length door status • Screw terminal connections to 12 or 24 relay I/O from access controller • Manual key over-ride lock release • RJ45 connections for power and data to 12 or 24 TZ locking devices • Differentiated reporting of electronic or manual key release • RJ45 connections for power and data to one or two TZ Praetorian Triggers • No additional software application is needed • Wide range of input voltage: 90-250 V AC, 50-60 Hz • Flexible mounting options to fit a broad range of cabinet brands and models • Versions available for 12 door or 24 door capacity • Flexible mounting options for rack, wall, or shelf Contact your local sales representative for further details • UL/(C)UL and CE certifications and ordering information. Anixter No. Vendor No. Description 394281 112191.02 TZ Junction, 12 door capacity (requires one TZ Trigger unit) 394282 112191.01 TZ Junction, 24 door capacity (requires two TZ Trigger units) Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.87 Cabinet Locking Systems TZ Cabinets;Locking Systems/17397 Cabinets;Locking Systems/17587 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets TZ Praetorian Trigger TZ SlideHandle TZ - TELEZYGOLOGY INC PR29246V2-216377.eps TZ - TELEZYGOLOGY INC PR29247V2-216378.eps The TZ Praetorian Trigger is an indicator and interface device that visually The TZ SlideHandle integrates a high load Shape Memory Alloy (SMA) actuated communicates the status of up to 12 doors and allows authorized users to open locking mechanism, a manual key override, an electronic door status sensor, an doors with a single button push. Colored LEDs behind each button indicate the RJ45 connector for connection to standard patch cables and a multi-color LED locking state of cabinet or enclosure doors: status indicator. -RED means all enclosure doors are closed and secure -RED indicates the cabinet door is closed and secure -FLASHING ORANGE indicates access is currently authorized and a button push will -ORANGE (flashing) indicates access is authorized and is ready for release by pushing open the enclosure. This is the only state where a button push will have any effect the top of the lock -GREEN means that the door is open or is not secure -GREEN shows the door is open -FLASHING RED indicates the cabinet door has been accessed by manual key or has -FLASHING RED indicates the cabinet door has been accessed by manual key or has been breached been breached Each button can be labeled to correspond to the enclosure door that it is linked to and The TZ SlideHandle is powered and controlled via standard UTP Cat 5e/Cat 6 cabling can trigger. The TZ Praetorian Trigger receives power and data communications from through a TZ Praetorian Junction or TZ Centurion Bridge. The locking device has the the TZ Praetorian Junction over standard patch cabling connections. The device can be ability to control auxiliary sensor devices for temperature, humidity and D mounted onto a cabinet, wall, or electrical junction box in a location convenient for leak detection. use and for viewing the status of all enclosures in the system. We recommend that it The contents of the box: is placed at the end of a row of cabinets or near the entrance of a room in close -One SlideHandle proximity to the card reader. -One accessory kit for mounting The contents of the box: -One mounting instructions sheet -One TZ Trigger front assembly FEATURES -One TZ Trigger rear plate • Retrofits existing swing handle latching systems -Four TZ Trigger adhesive mount pads • Compatible with most cabinet brands Note: Standard clear plastic windows and labels are not included. Each TZ Trigger will • Simple installation and if required, disassembly require 13 labels and clear plastic windows. They can be ordered separately in a kit • Housing sits outside the cabinet door and does not encroach into valuable of 50 from part number 242338. cabinet real estate • Compatible with currently available single-point and multi-point latching as well FEATURES as split French doors • Compatible with structured cabling standards for 100 m length • Touch to release facility • Colored LEDs indicate status on all connected doors • Powered and controlled by TZ Praetorian Junction or TZ Centurion Bridge up to • Triggers up to 12 doors 100 m cable via twisted-pair cabling (Cat 5e/Cat 6) • Single RJ45 connection for all power and data • Connects into RJ45 based twisted-pair cabling infrastructure with standard • Flexible mounting options patch cables • Compatible with standard labeling • RS-485 serial communication allows remote unlocking, opening and • UL/(C)UL and CE certifications status feedback Anixter No. Vendor No. Description • Multiple sensors allow reporting on true door status, including manual override 394280 112132.01 TZ Trigger, 12 button mode and forced entry (locked/closed, unlocked/closed, unlocked/open, locked/open) • Multiple manual key override lock cylinders available for additional security Request the latest literature and guides from Anixter. 4.88 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Cabinet Locking Systems TZ Cabinets;Locking Systems/17888 Index1.Support and Supplies//Physical Support Structure//Cabinets APPLICATIONS The TZ SlideHandle is an intelligent locking device that offers a drop-in TZ Radial - 4100 Series replacement for manual swing-handle data center cabinet locks. TZ - TELEZYGOLOGY INC PR34479V2-255213.eps Anixter No. Vendor No. Description 427093 112479.01 TZ SlideHandle 4265CF 438855 112479.05 TZ SlideHandle 4265CF-R 427188 112479.04 TZ SlideHandle 4272CF 427189 112479.08 TZ SlideHandle 4272CF-R 427094 112479.03 TZ SlideHandle 4271CF 438552 112479.07 TZ SlideHandle 4271CF-R LOCK CYLINDERS One lock cylinder must be ordered for each SlideHandle. Additional lock cylinder numbers are available. Please contact sales for ordering information. The TZ Radial is an SMA actuated intelligent locking mechanism with a built-in Anixter No. Vendor No. Description locked/unlocked status sensor and an embedded microprocessor that is controlled via software command. The TZ Radial uses an eight-jaw locking mechanism to 427191 112461.01 Lock cylinder #1 capture and hold an inserted mating stud. The Shape Memory Alloy (SMA) actuator 427192 112461.05 Lock cylinder #5 controls the mechanism. This SMArt actuator is managed by an integrated 427193 112461.26 Lock cylinder #26 micro-controller, which provides programmability and software control. The 427194 112461.27 Lock cylinder #27 embedded intelligence at the device level enables networking, switching and the 427195 112461.28 Lock cylinder #28 ability to control other smart objects such as sensors. The TZ Radial locking device can be operated using a range of triggers, including push button, contact closure, or Please contact your local sales representative with your RS-485 serial communications network command. The device features a manual key cabinet make and model type to help determine the appropriate override and one-foot cable with an RJ45 coupler for connection to standard TZ SlideHandle and mounting kit. patch cables. Additional mounting kits may be required for certain data center cabinets. FEATURES • Unique, addressable device ID enables RS-485 communications networking of multiple devices • Remote access capability via network connection • Touch to release facility • High tensile load retention • Releasable under pre-loads of up to 70N • Redundant sensing of locked and unlocked states • Built-in mating stud ejector with internal release sensor • Built-in sensor inputs can automatically control various outputs, including lights and fans • Virtually silent operation through SMA actuation (no EMF emissions) • Vibration proof • Configurable for easy push release • Multiple manual release options available • Flexible mounting options APPLICATIONS The compact, lightweight, high-load TZ Radial is suitable for a wide range of cabinet locking applications and is the optimal security device for locking and auditing access to drawers and doors of medical casework and cabinets that contain sensitive information, controlled substances and expensive medical equipment. Anixter No. Vendor No. Description 433380 111359.11 TZ Radial, model 4110CF There are a variety of options available that include different materials, cable lengths and manual release options for specific applications. Please contact your local sales representative to help you select the option best suited for your application. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.89 Cabinet Locking Systems TZ Cabinets;Locking Systems/17586 Cabinets;Locking Systems/17595 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets TZ Centurion Locking System TZ Centurion Bridge TZ - TELEZYGOLOGY INC PR29241V2-216394.eps TZ - TELEZYGOLOGY INC PR29240V2-216396.eps The TZ Centurion system solution truly defines micro-protection. The system's The TZ Centurion Bridge is an IP-based gateway that controls the networking and IP-based access control system focuses on delivering physical security and management of TZ devices. The TZ Centurion network may be accessed through either environmental monitoring such as temperature sensing, humidity sensing and leak the TZ Web client utility embedded on the TZ Centurion Bridge or a component of a detection at the most granular level from anywhere in the world. TZ Centurion separate enterprise application, either TZ Centurion Server or integration with a is a cost-effective, flexible, retrofitable and easy to implement solution that third-party access management database. Communication between the individual TZ has been designed specifically to protect your organization's most valuable and devices on the network is accomplished through daisy-chained components and a sensitive assets. RS-485 serial data and power network. Built on an open and extendable architecture, the patented decentralized and The TZ Centurion Bridge is the centralized hub of the TZ Centurion system solution. embedded intelligence within the system locking devices provide an unprecedented FEATURES level of capability that cannot be readily delivered by conventional systems in terms • IP-based gateway allowing control of a network of TZ locks, sensors and ID of the integrity, control, auditability and traceability of discrete assets. card readers Up to 32 TZ locking devices and 64 TZ sensors can be connected to each TZ Centurion • Integrated auxiliary environmental sensing capability Bridge. Each Bridge can be managed individually or scaled to a larger system, allowing • Supports integration of TZ Wiegand devices for multiple third-party RFID or D hundreds of networked TZ locking devices, sensors, gateways and other third-party biometric readers components to be administered through TZ Centurion Server software or through a • Scalable RFID reader distribution throughout the network for ease of access third-party network management system that supports Simple Network Management • Small compact form capable of being rack-mounted with integrated Protocol (SNMP). power supply • No separate cabling; leverages existing industry standards and infrastructure FEATURES • TZ devices powered via standard structured cabling up to 100 m via • IP-based asset protection system which can seamlessly integrate with Cat 5e/Cat 6 enterprise systems • Easily set up, manage and monitor activity through Web • Physical security and audit trail capabilities for cabinets, equipment, panels server-based application and other enclosures • Compatible with TZ Centurion Server for multiple Bridge platform configurations • Compatible with structured cabling up to 100 m via Cat 5e/Cat 6 • Integrates TZ locking devices for quick and easy retrofitting to cabinets Anixter No. Vendor No. Description • Supports multiple Wiegand devices for third-party RFID readers 419086 112271.01 TZ Centurion Bridge • Can control localized appliances such as fans and task lights 438562 112549.01 TZ Centurion Bridge Rack Mounting Kit, 1U • Flexible and scalable system suitable for one cabinet or hundreds in multiple Cabinets;Locking Systems/17887 Index1.Support and Supplies//Physical Support Structure//Cabinets systems or across multiple sites • Multi-level user permission for access control TZ Centurion Server Software • Remote upgrades of device firmware TZ - TELEZYGOLOGY INC • Support for SNMP traps As a significant value-added extension, TZ Centurion Server is a software application • Integrates with TZ Centurion Server built on Microsoft technology to enable centralized remote management of your Contact your local sales representative for further details critical assets managed by the TZ Centurion System. The server communicates, and ordering information. controls, manages and reports on multiple TZ Centurion installations, managing all devices residing within the integrated system of networked TZ locking devices, sensors, gateways and other third-party components like biometric devices, cameras and meters. The platform stores all captured data, events and logs in a securely accessible central SQL Server database and uses Smart Client technology for its cross-browser user interface. The TZ Centurion Server can be seamlessly integrated with existing enterprise applications like building management, system maintenance, enterprise resource planning, configuration management, geographic information systems and customer Web portals. Request the latest literature and guides from Anixter. 4.90 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Cabinet Locking Systems TZ FEATURES One Multi Port Link can provide power and serial data connection for up to four TZ devices plus RS-485 serial data connections for the continuation of the network. The • User Interface Multi Port Link can also act as an inline power injector in order to power devices and -Rich and smart Web user interface, for both computer screens and provide four additional I/O connectors for accessories like sensors, in-cabinet task handheld devices lighting and fans. -Accessible only after authentication and authorization • Server Foundation FEATURES -Running on Windows Server and central SQL Server database • Extends TZ network and connects additional devices -Multi-user, multi-device and multi-gateway support • Provides power to devices -Role-based user access to accommodate different types of users like facility • Internal temperature sensor managers, security officers, engineers, IT staff and analysts • Screw terminals for auxiliary I/O devices • Security • Modules to cater for interconnection of two or four devices -Secure remote access control over the network for authorized users; supports • AC power adapter included dual factor authentication Anixter No. Vendor No. Description -Real-time alert notification via SNMP trap, SMS and/or e-mail 419087 112004.02 TZ Centurion Multi Port Link -Secure Sockets Layer (SSL) communication between server hardware and 419088 112004.01 TZ Centurion Multi Port Link with software end points power adapter -Secure multi-point proprietary RS-485 communications between hardware and 419089 112248.01 TZ Centurion Multi Port Link (RS-232) with security devices power adapter • Operations -Access management and issues management for operational cards Cabinets;Locking Systems/17605 Index1.Support and Supplies//Physical Support Structure//Cabinets -Operational reports on environment factors and access of assets TZ Centurion RFID • Integration -Integrates with other applications and systems through Web Service APIs, data TZ - TELEZYGOLOGY INC PR29242V2-216379.eps integration and SNMP Anixter No. Vendor No. Description 438770 112511.01 TZ Centurion Server Foundation 438772 112512.01 TZ Centurion Web Client Access, four licenses 438773 112513.01 TZ Centurion Device Access, 32 licenses 437326 112511.02 TZ Centurion Server Express, starter pack includes: one Server Foundation, two Web Client Access licenses and 64 Device Access licenses The TZ RFID reader with integrated Wiegand translator connects to a TZ Centurion ADDITIONAL MODULES network and provides access control via RFID or by interpreting a Wiegand data Anixter No. Vendor No. Description stream from third-party security input such as from biometric scanners. 444566 112514.01 TZ Analysis Module The device can operate both standalone, controlling a small group of networked 444568 112515.01 TZ Asset Configuration Module system devices, or as a network device that transmits information - like access 444570 112516.01 TZ Visit Managment Module attempts - to the rest of the network. FEATURES Contact your local sales representative for further details and ordering information. • Allows RFID cards to trigger TZ devices • Allows audit trail of authorized and unauthorized attempts in conjunction with Cabinets;Locking Systems/17604 Index1.Support and Supplies//Physical Support Structure//Cabinets specific applications TZ Centurion Multi Port Link • Screw terminals for auxiliary I/O of one device • Can be used as a standalone controller for a smaller network TZ - TELEZYGOLOGY INC PR29238V2-216380.eps • Powered from the TZ structured cable network Anixter No. Vendor No. Description 419090 112167.01 TZ Centurion RFID The TZ Centurion Multi Port Link provides dynamic and cost-effective security, sensing and power expansion of the TZ Centurion System. This interconnect module enables networking of TZ locking and environmental monitoring devices. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.91 Cabinet Locking Systems TZ Cabinets;Locking Systems/17606 Cabinets;Locking Systems/17608 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets TZ Centurion Wiegand Translator TZ Sensors TZ - TELEZYGOLOGY INC PR29243V2-216382.eps TZ - TELEZYGOLOGY INC PR29245V2-216372.eps The TZ Contact Sensor is a magnetic reed switch. When properly installed it allows the The TZ Centurion Wiegand Translator Interface connects to a TZ Centurion network and connected TZ device to determine when a door is open or closed. provides access control by interpreting a Wiegand data stream from third-party TZ Sensors are extremely cost-effective smart devices that provide environmental security input such as from biometric scanners. monitoring within the TZ Centurion network at the cabinet enclosure level across a The device can operate both standalone, controlling a small group of networked range of operating conditions: temperature, humidity, door contact and system devices, or as a network device that transmits information - like access leak detection. attempts - to the rest of the network. FEATURES FEATURES • The TZ Temperature Sensor measures the ambient temperature within the • Allows third-party Wiegand devices to trigger the TZ Centurion system enclosure or cabinet; its temperature sensor circuit is designed to measure • Allows audit trail of authorized and unauthorized attempts in conjunction with temperatures between 15°C to 60°C (5°F to 140°F) specific applications • The TZ Relative Humidity Sensor contains a circuit designed to measure relative • Screw terminals for connection to third-party Wiegand devices humidity between 5% and 95% • Can be used as a standalone controller for a smaller network • The TZ Contact Sensor is a magnetic reed switch. When properly installed it • Powered from the TZ structured cable network allows the connected TZ device to determine when a door is open or closed • The TZ Leak Detection Sensor is a sealed optical device which can detect the Anixter No. Vendor No. Description presence of liquids 419091 1D 12074.01 TZ Centurion Wiegand Translator Anixter No. Vendor No. Description Cabinets;Locking Systems/17607 Index1.Support and Supplies//Physical Support Structure//Cabinets 419093 112328.02 TZ Temperature Sensor TZ Centurion Port Link 419094 112328.01 TZ Humidity Sensor 419095 112328.03 TZ Liquid Sensor TZ - TELEZYGOLOGY INC PR29239V2-216393.eps 419096 112354.01 TZ Door Contact Sensor The TZ Centurion Port Link provides dynamic and cost-effective security, sensing and power expansion of the TZ Centurion System. These interconnect modules enable networking of TZ locking and environmental monitoring devices. The TZ Centurion Port Link provides a connection for one TZ device plus RS-485 and power connections for the continuation of the network. An on-board screw terminal supports the connection of two auxiliary inputs for devices such as temperature and door status sensors, and two auxiliary outputs for accessories like in-cabinet task lighting and fans. FEATURES • Extends TZ network and connects additional devices • Screw terminals for auxiliary I/O devices • Interconnection of one device and extension or two devices at end of branch • LED power indicator Anixter No. Vendor No. Description 419092 112330.01 TZ Centurion Port Link Request the latest literature and guides from Anixter. 4.92 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Zone Cabling Enclosures Chatsworth Products, Inc. (CPI) ./Zone Cabling Enclosures;Ceiling-mount and Raised Floor/10338 Index1.Support and Supplies//Physical Support Structure//Cabinets Anixter No. Vendor No. Description Zone Cabling Telecommunications Enclosures 188400 11440-001 Threaded rod, 3/8-16 in. x 6 ft. L installation hardware CHATSWORTH PRODUCTS INC (CPI) PR6803V2-143887.eps 132040 10557-001 I-beam clamp, 3/8-16 in. rod installation hardware 225076 20142-091 Hex nut 3/8-16 in. installation hardware 226449 20141-090 Split lock washer, 3/8 in. installation hardware 187970 04002-002 Type A plain washer, 3/8 in. installation hardware Zone Cabling Enclosures;Raised Floor/12230 Index1.Support and Supplies//Physical Support Structure//Cabinets Raised Floor Enclosure for Fiber Zone enclosures allow utilization of standards-recognized zone cabling practices to CHATSWORTH PRODUCTS INC (CPI) PR11258V2-18379.eps reduce the overall cost of adding or moving network cabling. ENCLOSURES FOR DROP CEILINGS 2 ft. x 2 ft. enclosures with cable access penetrations located on each end. Includes foam kits to seal the cable access penetrations. 2 ft. x 4 ft. enclosures also available. Anixter No. Vendor No. Description 248058 A1222-LP 2 ft. x 2 ft. enclosure for punch-down blocks, 13.75 in. W x 19.5 in. L mounting plate 248057 A1222-PP 2 ft. x 2 ft. enclosure for patch panel, 4U This raised floor enclosure provides easy access to a rack-mount fiber enclosure for patch panels when it is located under a raised floor. Placing connections under the raised floor 248056 A1222-HR 2 ft. x 2 ft. enclosure for switches and saves valuable rack-mount space within equipment cabinets and allows the data routers, 4U for patch panels plus 2U x center to be easily reconfigured - just unplug the patch cords and move the cabinet. 15 in. D for switches The fiber enclosure is placed under a 2 ft. x 2 ft. raised floor tile. The enclosure is 8 in. high and can be installed in raised floors that are at least 9 in. high. ENCLOSURES FOR RAISED FLOORS For plenum or nonplenum cable penetration. Mounts into space allocated for a FEATURES standard access floor panel. Supported and attached to building structure via the • Size: 24 in. W x 24 in. L x 8 in. D pedestals used to support access flooring system, using the tile floor as the access • Fits under a single 2 ft. x 2 ft. access floor tile door. Cable access penetration located on each end panel. Includes foam kits to seal • Features two 7 in. x 2 in. cable access ports the cable access penetrations. Other sizes and styles available. • Includes 19 in. EIA threaded equipment mounting rails with 4U of rack-mount Anixter No. Vendor No. Description space which can be centered or offset in the enclosure 200651 A0622-RF 2U + 2U enclosure for 6 in. D • Cable tie points simplify cable management access floor • Includes four raised floor support brackets 200652 A0822-RF 4U + 4U enclosure for 8 in. D Anixter No. Vendor No. Description access floor 313445 A0822-RF-F Raised floor enclosure for fiber 248062 A1422-RF 11U enclosure for 14 in. D access floor 248065 A1411RF-HR Enclosure for active components 7U, for 14 in. D access floors ZONE ENCLOSURE ACCESSORIES Anixter No. Vendor No. Description 128493 40605-001 50-pack, 12 to 24 mounting screws 187266 02006-201 Cable management Saf-T-Grip 6 in. for 2 in. diameter, open loop series, black, 25 per pack 313443 02009-201 Cable management Saf-T-Grip 9 in. for 3 in. diameter, open loop series, black, 25 per pack 313444 02012-201 Cable management Saf-T-Grip 12 in. for 4 in. diameter, open loop series, black, 25 per pack Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.93 Zone Cabling Enclosures PANDUIT ./Zone Cabling Enclosures;Ceiling-mount and Raised Floor/3053 Index1.Support and Supplies//Physical Support Structure//Cabinets RAISED FLOOR ENCLOSURES PR22272V2-129739.eps Zone Cabling Enclosures PANDUIT PR24070V2-173976.eps Anixter No. Vendor No. Description 372768 PZRFE4U Fully assembled raised floor enclosure requires 6 in. minimum raised floor PANDUIT zone cabling solutions provide a complete line of efficient and cost-effective depth; black finish. Accepts 4 RMU of ways to design and deploy cabling systems for open-office architecture applications, standard patch panels or 2 RMU of telecommunications enclosures, wireless deployments and data centers. PANDUIT QUICKNET preterminated assemblies or offers ceiling-, wall- and under floor-mountable enclosures to support the zone cassettes - 22.62 in. H x 22.62 in. W x cabling topology. 5.0 in. D IN-CEILING ENCLOSURES PR12377V2-25623.eps 372776 PZRFE8U Fully assembled raised floor enclosure requires 8 in. minimum raised floor depth; black finish. Accepts 6 RMU of standard patch panels or 3 RMU of QUICKNET preterminated assemblies or cassettes - 22.62 in. H x 22.62 in. W x 8.5 in. D 372778 PZRFE12U Fully assembled raised floor enclosure D requires 14 in. minimum raised floor depth; black finish. Accepts 12 RMU of standard patch panels or 63 RMU of The in-ceiling enclosures are mountable to the ceiling tile grid system, and QUICKNET preterminated assemblies - supported to the building structure by 3/8 in. threaded rod providing secure, yet 22.62 in. H x 22.62 in. W x 12.0 in. D easy, access for all cabling applications. There are two styles of in-ceiling 372779 PZRFC Lockable cover for PanZone raised floor enclosures: active or passive. Both versions include 19 in. mounting brackets with enclosures, includes two keys an integrated cable slack manager, six cable entry/exit locations and gas assist cylinders for easy access. The active enclosure is AC power-ready and allows up to OFFICE RAISED FLOOR ENCLOSURES PR29187V2-216049.eps 8 RMU of rack-mountable panels of your choice or 2 RMU of active equipment and 6 RMU of rack-mountable panels. The passive enclosure accepts up to six 110 punch-down blocks or 8 RMU of rack-mountable panels. The active version is designed to accommodate two 48-port 1 RMU PoE enabled switches. (supports up to 500 W, 17.5 in. depth, 50 lb. load rating) Anixter No. Vendor No. Description 366834 PZICEA Active in-ceiling zone enclosure, includes 8 RMU mounting bracket, cable and slack manager, 60 cfm fan. 13.5 in. H x 25.50 in. W x 27.5 in. D, for 2 ft. x 2 ft. ceiling grid system Anixter No. Vendor No. Description 369303 PZICE Passive in-ceiling zone enclosure, 425625 ACE48 Fully assembled office raised floor includes 8 RMU mounting bracket and cable slack manager. 13.5 in. H x consolidation point enclosure mounts in 10.5 in. x 10.5 in. cutout in one raised 25.50 in. W x 27.5 in. D, for 2 ft. x 2 ft. floor tile, black finish. Supports 48 copper ceiling grid system cables or up to 96 fiber cables; accepts MINI-COM modules Request the latest literature and guides from Anixter. 4.94 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Zone Cabling Enclosures PANDUIT Zone Cabling Enclosures;Wall-mount/17548 Zone Cabling Enclosures;Wall-mount/17549 Index1.Support and Supplies//Physical Support Structure//Cabinets Index1.Support and Supplies//Physical Support Structure//Cabinets PanZone Wall-mount Cabinets PanZone Active Wall-mount Enclosures PANDUIT PR29264V2-216649.eps PANDUIT PR29265V2-216645.eps FEATURES FEATURES • Holds 12RU of active and passive network equipment plus two additional RU for • Holds up to 3RU of passive product and up to 3RU of active equipment power strips and small electronic devices (modems, routers, etc.) • Provides optimal cable management by allowing adequate space to route and • Structurally engineered to swing freely even under maximum load capacity manage patch cords • Thermal management design (vents, perforated doors and optional fan) • Patch panel bracket rotates 90° and accepts 19 in. rack-mountable product optimizes air flow for improved heat dissipation; ideal for high heatload PoE allowing easy installation enabled switch applications • Provides multiple cable entry/exit points via knockouts • Working load rating of 250 lb. • Design accepts all standard 19 in. patch panels • Adjustable rails mount at 1 in. increments to accommodate various depths of • Door can be assembled to hinge on either the right or left side providing network equipment including PoE switches flexiblity and easy access for any mounting location • Individual rack spaces are identified for ease of equipment mounting • Front cover has standard padlock feature; optional keyed locks available • Vented design and optional fan provides thermal management for switches and Anixter No. Vendor No. Description power supplies 405051 PZC12S Wall-mount cabinet with a solid front • Includes mounting template for quick installation door, 25.81 in. H x 25 in. W x 22.85 in. D Anixter No. Vendor No. Description 368147 PZC12W Wall-mount cabinet with window front 295298 PZAEWM3 Active wall-mount enclosure, 38.5 in. H x door, 25.81 in. H x 25 in. W x 22.85 in. D 27.92 in. W x 8.61 in. D 355847 PZC12P Wall-mount cabinet with perforated front door, 25.81 in. H x 25 in. W x 22.85 in. D Zone Cabling Enclosures;Wall-mount/17551 Index1.Support and Supplies//Physical Support Structure//Cabinets Punch-down Consolidation Point Enclosure PANDUIT PR29300V2-216903.eps FEATURES • UL 2043 approved for use in air handling spaces • Follows ANSI/TIA-568-B standard • Mount to wall above and below ceiling • Punch-down kit sold separately Anixter No. Vendor No. Description 425669 WMCPE Punch-down consolidation point enclosure, 3.44 in. H x 9.47 in. W x 13.22 in. L Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.95 Zone Cabling Enclosures PANDUIT Zone Cabling Enclosures;Building Automation/17550 Index1.Support and Supplies//Physical Support Structure//Cabinets PanZone Building Automation Systems Enclosure PANDUIT PR29266V2-216643.eps FEATURES • Integrates data communications and Building Automation Systems (BAS) by converging the infrastructure into a single Ethernet network • Minimizes installation costs by consolidating BAS equipment into a single enclosure • Eliminates redundant cable runs • Provides optimal cable routing and management of patch cords and electrical components • Vented design and optional fan provides thermal management for network equipment and power supplies • Includes perforated panel (32 in. H x 22.5 in. W) for mounting BAS devices Anixter No. Vendor No. Description 425673 PZBASE3 Building automation systems enclosure, D 48.5 in. H x 35 in. W x 8.6 in. D Zone Cabling Enclosures;Accessories/17547 Index1.Support and Supplies//Physical Support Structure//Cable Runway PanZone Overhead Distribution Racks PANDUIT PR29547V2-219114.eps FEATURES • Ideal solutions for adding more rack spaces above racks or cabinets in data centers or telecommunications rooms • Universal mounting bracket can be mounted to most industry ladder racks or cable trays or suspended by threaded rod from ceiling • Multiple mounting configurations • 40/60/80 lb. load rating • Optional cable management solutions (PZBR4 and CMVDR2) Anixter No. Vendor No. Description 425663 PZLRB2 2RU ladder rack bracket 398779 PZLRB4 4RU ladder rack bracket 364751 PZLRB6 6RU ladder rack bracket Request the latest literature and guides from Anixter. 4.96 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Zone Cabling Enclosures Wiremold ./Zone Cabling Enclosures;Ceiling-mount and Raised Floor/15436 Index1.Support and Supplies//Physical Support Structure//Zone Cabling Cabinets CZE SERIES CEILING-MOUNTED ZONE CABLING ENCLOSURES PR22470V2-133075.eps Wiremold Zone Cabling Enclosure Solutions WIREMOLD These enclosures create an intermediate or remote consolidation point that may be tested and secured prior to adding drops for voice and data outlets. The enclosures are plenum rated by UL and may be used in environmental air spaces. They accept a wide variety of patch panels and wiring blocks for copper and fiber applications. Custom units are available for unique projects with special requirements. RFE SERIES RAISED FLOOR ZONE CABLING ENCLOSURES PR22469V2-133071.eps Designed to integrate into standard drop ceiling grids Anixter No. Vendor No. Description 375611 CZE-242412A 12 in. deep telecommunications enclosure for 2 ft. x 2 ft. drop ceiling tile, one removable 7 RMU bracket for 19 in. patch panels and equipment, includes junction box and fan 375612 CZE-242412PP 12 in. deep patch panel enclosure for 2 ft. x 2 ft. drop ceiling tile, one bracket for Designed to integrate into standard floor tile openings 19 in. patch panels, bracket supports 5 RMU Anixter No. Vendor No. Description 375613 CZE-242412WB-133 12 in. deep termination block enclosure 375598 RFE-25256 Enclosure for 6 in. deep floor, two pairs of for 2 ft. x 2 ft. drop ceiling tile, one rails for 19 in. patch panels, supports removable mounting plate for two 2 RMU each 300-pair 1100 style termination blocks 375605 RFE-242412 Enclosure for 14 in. deep floor, one rail for (without legs) 19 in. patch panels, supports 11 RMU 375610 RFE-25257RB Enclosure for 8 in. deep floor, two pairs of rails for 19 in. patch panels, supports 4 RMU each Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.97 Security and Commercial Enclosures Chatsworth Products, Inc. (CPI) ./Enclosures;Security and Commercial/17880 Index1.Support and Supplies//Physical Support Structure//Accessories ACCESSORIES Wall-Mount Kit creates a shelf for the enclosure. Include Tapped Rail Kit when DVR Security Enclosures mounting Large DVR Security Enclosure to a wall. CHATSWORTH PRODUCTS INC (CPI) PR34420V2-254403.eps Anixter No. Vendor No. Description 418772 82052-701 Tapped Rail Kit, for Large DVR Security Enclosure, 5U x 19 in. EIA, black 194844 40605-005 Equipment mounting screws, #12-24, 50 pack, black 418771 82051-703 Wall-Mount Kit, for Large DVR Security Enclosure, black 418774 82053-002 Fan Kit, for Medium DVR Security Enclosure, 115 V AC, 110 cfm, NEMA 1-15P, black 418773 82053-001 Fan Kit, for Small DVR Security Enclosure, Secure and protect digital video recorders (DVRs) and other electronic security 115 V AC, 31 cfm, NEMA 1-15P, black equipment located outside equipment rooms to help prevent accidental damage, theft or vandalism. Place enclosures on a countertop or shelf. Available in Other CPI equipment enclosures are available. Please contact your local three sizes. sales representative for further details. FEATURES Enclosures;Security and Commercial/17487 • Hinged, locking front door with optional plexiglass window Index1.Support and Supplies//Physical Support Structure//Cabinets • Removable top/cover provides easy access to equipment CUBE-iT Mini Equipment Enclosure • Made from steel, riveted construction, painted black finish CHATSWORTH PRODUCTS INC (CPI) PR34419V2-254401.eps • Large DVR Security Enclosure secures equipment up to 10.5 in. H x 22 in. W x 26.5 in. D and includes a fan • Large DVR Security Enclosure can support 5U of 19 in. EIA rack-mount equipment, up to 80 lb., with the accessory tapped rail kit, ordered separately • Large DVR Security Enclosure can also be wall-mounted, use the accessory D wall-mount kit, ordered separately • Medium DVR Security Enclosure secures equipment up to 7.25 in. H x 19.5 in. W x 19 in. D, fan available as an accessory • Small DVR Security Enclosure secures equipment up to 5 in. H x 18.75 in. W x 15 in. D, fan available as an accessory SMALL DVR SECURITY ENCLOSURE The Cube-iT Mini Equipment Enclosure allows 8U of 19 in. EIA rack-mount equipment 6 in. H x 20.25 in. W x 17 in. D to be securely located outside of the equipment room. Use the Cube-iT Mini Equipment Enclosure to secure digital video recorders (DVRs), encoders, servers and Anixter No. Vendor No. Description other electronic security equipment. Place on the floor, a countertop or shelf (cannot 418766 82050-703 Metal door with window, black be wall-mounted). 418770 82050-733 Metal door, no window, black FEATURES MEDIUM DVR SECURITY ENCLOSURE • Hinged, locking front door with perforated panel 8.75 in. H x 21.25 in. W x 21 in. D • Hinged, locking rear door with three 2.7 in. diameter grommet-protected cable Anixter No. Vendor No. Description access ports 418765 82050-702 Metal door with window, black • Vented sides; add up to two top-mount Intelligent Fan Kits, ordered separately, 418768 82050-722 Metal door, no window, black to increase airflow • Includes two pairs of #12-24 tapped 19 in. EIA equipment mounting rails LARGE DVR SECURITY ENCLOSURE • Rails adjust in depth up to 32 in. deep, support 8U of equipment, up to 80 lb. 11.5 in. H x 23.25 in. W x 28.5 in. D • Made from steel, riveted construction Anixter No. Vendor No. Description Anixter No. Vendor No. Description 418764 82050-701 Metal door with window, black 418796 82004-700 Cube-iT Mini Equipment Enclosure, 418767 82050-711 Metal door, no window, black 17.2 in. H x 24.2 in. W x 36 in. D, 8U, black 373518 13051-002 Intelligent Fan Kit, 115 V AC, 36-49 cfm, NEMA 1-15P, black Request the latest literature and guides from Anixter. 4.98 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Security and Commercial Enclosures Great Lakes Case & Cabinets Co., Inc. ./Enclosures;Security and Commercial/17889 Index1.Support and Supplies//Physical Support Structure//Cabinets Tilt Panel Mount GREAT LAKES CASE & CABINET PR34466V2-255163.eps The Tilt Panel Mount, designed for patch panels and network panels, makes installing deeper equipment possible. Ideal for small areas. FEATURES • 19 in. EIA-310-D-compliant mounting • #12-24 threaded mounting holes • Rails tilt down to 90 degrees for easy equipment access • Security cover kit available • All-steel construction • Durable black texture powder coat finish Anixter No. Vendor No. Description 444585 BS2-TPM-818 16.31 in. H x 19.88 in. W x 18.00 in. D, weight capacity 50 lb., 8 RMU 444588 BS2-TPMC-818 Tilt Panel Mount Cover Kit, includes top cover and front panel Enclosures;Security and Commercial/16406 Index1.Support and Supplies//Physical Support Structure//Cabinets DVR Lock Box GREAT LAKES CASE & CABINET PR23694V2-168274.eps The Great Lakes DVR Lock Box was designed to safely and securely house small rack mounted or electrical equipment, including DVD or digital recorders. It is available in two sizes, 3 RMU and 5 RMU. With a variety of mounting options the DVR Lock Box can be easily attached or hung on nearly any surface. Anixter No. Vendor No. Description 397934 BS2-UCB3 3 RMU, 6.3 in. H x 21 in. W x 21 in. D, weight capacity 100 lb. 397935 BS2-UCB5 5 RMU, 9.8 in. H x 21 in. W x 21 in. D, weight capacity 100 lb. 397936 BS2-UCBBKT Bracket for placement of Under Counter Box 397938 7217-04 Single fan assembly with a 75 cfm fan and cord Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.99 Security and Commercial Enclosures Hoffman ./Enclosures;Security and Commercial/14991 Index1.Support and Supplies//Physical Support Structure//Cabinets Anixter No. Vendor No. Description Type 1 Enclosure 366340 A20N20BLP Type 1 medium enclosure, 20 in. H x 20 in. W x 8.62 in. D HOFFMAN PR21427V2-119396.eps 366341 A24N20BLP Type 1 medium enclosure, 24 in. H x 20 in. W x 8.62 in. D 366342 A24N24BLP Type 1 medium enclosure, 24 in. H x 24 in. W x 8.62 in. D 366343 A24N24DLP Type 1 medium enclosure, 24 in. H x 24 in. W x 12.62 in. D A42N3609 A42N3609 Type 1 large enclosure, 42 in. H x 36 in. W x 9.25 in. D ACCESSORIES Anixter No. Vendor No. Description Designed for use in control and instrumentation applications in areas that do not 366344 A6N6PP Perforated back panel for 6 in. H x require oiltight and dust-tight specifications. Available perforated back panel 6 in. W small enclosure reduces time required to mount components. 366345 A8N6PP Perforated back panel for 8 in. H x FEATURES 6 in. W small enclosure • Industry standard: NEMA/EEMAC Type 1 366346 A8N8PP Perforated back panel for 8 in. H x • Flush slotted latch operated with a screwdriver. Optional latches available 8 in. W small enclosure • Weldnuts provided for mounting optional panels 335283 A10N10PP Perforated back panel for 10 in. H x • 16 gauge steel 10 in. W small enclosure • Butt hinges 366347 A12N10PP Perforated back panel for 12 in. H x • Mounting holes on back of enclosure 10 in. W small enclosure • ANSI 61 gray polyester powder paint finish inside and out 366348 A12N12PP Perforated back panel for 12 in. H x ENCLOSURES 12 in. W small enclosure D Anixter No. Vendor No. Description 366349 A14N12PP Perforated back panel for 14 in. H x 366327 A6N64 Type 1 small enclosure, 6 in. H x 6 in. W 12 in. W small enclosure x 4 in. D 366350 A16N12PP Perforated back panel for 16 in. H x 366328 A8N64 Type 1 small enclosure, 8 in. H x 6 in. W 12 in. W small enclosure x 4 in. D 366351 A16N12MPP Perforated back panel for 16 in. H x 366329 A8N84 Type 1 small enclosure, 8 in. H x 8 in. W 12 in. W medium enclosure x 4 in. D 366352 A20N12MPP Perforated back panel for 20 in. H x 366330 A12N104 Type 1 small enclosure, 12 in. H x 10 in. W 12 in. W medium enclosure x 4 in. D 366353 A20N16MPP Perforated back panel for 20 in. H x 366331 A12N124 Type 1 small enclosure, 12 in. H x 12 in. W 16 in. W medium enclosure x 4 in. D 366354 A20N20MPP Perforated back panel for 20 in. H x 366332 A8N86 Type 1 small enclosure, 8 in. H x 8 in. W 20 in. W medium enclosure x 6 in. D 366355 A24N20MPP Perforated back panel for 24 in. H x 366333 A10N106 Type 1 small enclosure, 10 in. H x 10 in. W 20 in. W medium enclosure x 6 in. D 331032 A24N24MPP Perforated back panel for 24 in. H x 366334 A12N126 Type 1 small enclosure, 12 in. H x 12 in. W 24 in. W medium enclosure x 6 in. D A42P36 A42P36 Solid back panel for 42 in. H x 366335 A14N126 Type 1 small enclosure, 14 in. H x 12 in. W 36 in. W large enclosure x 6 in. D AL12AR AL12AR Optional cylinder lock kit 366336 A16N126 Type 1 small enclosure, 16 in. H x 12 in. W More sizes available. For more information contact x 6 in. D your sales representative. 366337 A20N16ALP Type 1 medium enclosure, 20 in. H x 16 in. W x 6.62 in. D 366338 A20N20ALP Type 1 medium enclosure, 20 in. H x 20 in. W x 6.62 in. D 255674 A24N24ALP Type 1 medium enclosure, 24 in. H x 24 in. W x 6.62 in. D 366339 A20N12BLP Type 1 medium enclosure, 20 in. H x 12 in. W x 8.62 in. D Request the latest literature and guides from Anixter. 4.100 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Security and Commercial Enclosures Hoffman Enclosures;Security and Commercial/14989 Index1.Support and Supplies//Physical Support Structure//Cabinets • No gasketing • ANSI 61 gray polyester powder paint finish inside and out Screw Cover Type 1 Pull Box SCREW COVER PR21447V2-119584.eps HOFFMAN PR21425V2-119397.eps Anixter No. Vendor No. Description Designed for use as a junction box and pull box in commercial and general 366672 A4R44 Type 3R screw cover enclosure, 4 in. H x applications. Flush covers and door frames must be ordered separately for 4 in. W x 4 in. D flush installations. 366673 A6R64 Type 3R screw cover enclosure, 6 in. H x FEATURES 6 in. W x 4 in. D • Industry standard: NEMA/EEMAC Type 1 259511 A8R64 Type 3R screw cover enclosure, 8 in. H x • Flat, removable covers fastened with plated steel screws 6 in. W x 4 in. D • Provision for grounding 259513 A8R84 Type 3R screw cover enclosure, 8 in. H x • Mounting holes on back of box 8 in. W x 4 in. D • Unique keyhole screw slots in the cover permit removal of the cover without 366674 A10R104 Type 3R screw cover enclosure, 10 in. H x extracting the screws 10 in. W x 4 in. D • ANSI 61 gray polyester powder paint finish inside and out 316679 A12R124 Type 3R screw cover enclosure, 12 in. H x Anixter No. Vendor No. Description 12 in. W x 4 in. D 366304 ASE4X4X4 Pull box, 4 in. H x 4 in. W x 4 in. D 366675 A6R66 Type 3R screw cover enclosure, 6 in. H x ASE6X6X4 ASE6X6X4 Pull box, 6 in. H x 6 in. W x 4 in. D 6 in. W x 6 in. D ASE8X8X4 ASE8X8X4 Pull box, 8 in. H x 8 in. W x 4 in. D 366676 A8R86 Type 3R screw cover enclosure, 8 in. H x 366307 ASE10X10X4 Pull box, 10 in. H x 10 in. W x 4 in. D 8 in. W x 6 in. D 366308 ASE12X12X4 Pull box, 12 in. H x 12 in. W x 4 in. D 366677 A10R106 Type 3R screw cover enclosure, 10 in. H x 366309 ASE6X6X6 Pull box, 6 in. H x 6 in. W x 6 in. D 10 in. W x 6 in. D 366310 ASE8X8X6 Pull box, 8 in. H x 8 in. W x 6 in. D 366678 A12R126 Type 3R screw cover enclosure, 12 in. H x 366311 ASE10X10X6 Pull box, 10 in. H x 10 in. W x 6 in. D 12 in. W x 6 in. D ASE12X12X6 ASE12X12X6 Pull box, 12 in. H x 12 in. W x 6 in. D 366679 A16R126 Type 3R screw cover enclosure, 16 in. H x ASE18X18X6 ASE18X18X6 Pull box, 18 in. H x 18 in. W x 6 in. D 12 in. W x 6 in. D 366314 ASE24X24X6 Pull box, 24 in. H x 24 in. W x 6 in. D 366680 A18R186 Type 3R screw cover enclosure, 18 in. H x 366315 ASE24X24X8 Pull box, 24 in. H x 24 in. W x 8 in. D 18 in. W x 6 in. D 366681 A24R246 Type 3R screw cover enclosure, 24 in. H x More sizes available and also without knockouts. For more information 24 in. W x 6 in. D contact your sales representative. 366682 A12R128 Type 3R screw cover enclosure, 12 in. H x 12 in. W x 8 in. D Enclosures;Security and Commercial/15000 Index1.Support and Supplies//Physical Support Structure//Cabinets 366683 A18R188 Type 3R screw cover enclosure, 18 in. H x Type 3R Enclosures 18 in. W x 8 in. D HOFFMAN 366684 A24R248 Type 3R screw cover enclosure, 24 in. H x Designed for use as a wiring box and junction box. Enclosure provides protection 24 in. W x 8 in. D against rain, sleet and snow in outdoor installations or against dripping water in indoor installations. FEATURES • Industry standard: NEMA/EEMAC Type 3R • Drip shield top and seam-free sides, front and back • Slip-on removable cover fastened with plated steel screws along the Continued on next page >> bottom edge • Provision for padlocking Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.101 Security and Commercial Enclosures Hoffman Enclosures;Security and Commercial/15003 Index1.Support and Supplies//Physical Support Structure//Cabinets (continued) Type 3R Enclosures Type 4x Fiberglass Hinged Cover Wi-Fi Cabinet HINGED COVER PR21448V2-119589.eps HOFFMAN PR21444V2-119582.eps Anixter No. Vendor No. Description Provides a secure enclosure for wireless equipment in both indoor and outdoor 366685 A6R44HCR Type 3R hinged cover enclosure, 6 in. H x locations. Ideal for locations such as tunnels, floor vaults, marinas, outside walls 4 in. W x 4 in. D and rooftops. Fiberglass construction allows Wi-Fi and WLAN signals to pass through 317368 A6R64HCR Type 3R hinged cover enclosure, 6 in. H x the cabinet unimpeded. Light weight for easy mounting. Available with solid and 6 in. W x 4 in. D window covers. Covers are secured with screws; optional quick release latches 366686 A8R64HCR Type 3R hinged cover enclosure, 8 in. H x are available. 6 in. W x 4 in. D FEATURES 366687 A8R86HCR Type 3R hinged cover enclosure, 8 in. H x 8 in. W x 6 in. D • Industry standard: NEMA/EEMAC Type 4, 4X, 12 and 13 • Enclosures and cover made of molded fiberglass polyester that resists 366688 A10R86HCR Type 3R hinged cover enclosure, 10 in. H x chemicals and temperature change 8 in. W x 6 in. D • Includes a 3/4 in. plywood panel for mounting equipment 366689 A12R106HCR Type 3R hinged cover enclosure, 12 in. H x • Seamless foam-in-place gasket assures watertight and dust-tight seal 10 in. W x 6 in. D • Screw cover enclosures are secured with two captivated Type 316 stainless steel 366690 A12R126HCR Type 3R hinged cover enclosure, 12 in. H x D slotted cross point cover screws 12 in. W x 6 in. D Anixter No. Vendor No. Description 366691 A12R1210HCR Type 3R hinged cover enclosure, 12 in. H x 366699 D664CHSCFGP Type 4x, fiberglass, Wi-Fi enclosure, solid 12 in. W x 10 in. D cover, 6 in. H x 6 in. W x 4 in. D 317883 D16148CHSCFGP Type 4x, fiberglass, Wi-Fi enclosure, solid cover, 16 in. H x 14 in. W x 8 in. D 366700 D181610CHSCFGP Type 4x, fiberglass, Wi-Fi enclosure, solid cover, 18 in. H x 16 in. W x 10 in. D Also available with window cover. For more information contact your sales representative. Request the latest literature and guides from Anixter. 4.102 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Ladder Rack Cable Runway Chatsworth Products, Inc. (CPI) ./Runway, Cable;Ladder Rack/2524 Runway, Cable;Ladder Rack/2461 Index1.Support and Supplies//Physical Support Structure//Cable Runway Index1.Support and Supplies//Physical Support Structure//Accessories Universal Cable Runway Cable Runway E-bend CHATSWORTH PRODUCTS INC (CPI) PR6808V2-36187.eps CHATSWORTH PRODUCTS INC (CPI) pr5206V2-143868.eps Use to create a smooth 90 degree right or left (L-shaped) turn in a horizontal cable Universal Cable Runway is used to create a pathway for premise cables in between runway pathway. Match to the width of the connecting cable runway. points-of-entry and racks or cabinets within telecommunications facilities. Universal Cable Runway may be supported from the top of racks or cabinets, from the ceiling, FEATURES along walls or under raised floors with accessories available from CPI. • Made of 0.065 in. thick tubular steel bar, 1.5 in. high x 0.375 in. wide FEATURES • Five cross members welded at approximately 23 degree increments • Requires two cable runway butt-splice kits for installation • Made of 0.065 in. thick tubular steel bar, 1.5 in. H x 0.375 in. W • Painted finishes only • Standard length is 9 ft. 11 1/2 in. • Packaged individually • Cross members are welded on 12 in. centers • Other colors and widths available • Painted finishes only • UL Classified for suitability as an equipment grounding conductor only. Paint Anixter No. Vendor No. Description must be removed under splices 174200 10822-712 12 in. W, black • Packaged individually 174202 10822-718 18 in. W, black • Other colors and widths available Runway, Cable;Ladder Rack/2460 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description Cable Runway Radius Bends 164166 10250-712 1.5 in. H x 12 in. W x 9 ft. 11 1/2 in. L, black CHATSWORTH PRODUCTS INC (CPI) pr5207V2-143869.eps 182236 10250-718 1.5 in. H x 18 in. W x 9 ft. 11 1/2 in. L, black 189364 10250-724 1.5 in. H x 24 in. W x 9 ft. 11 1/2 in. L, black 443311 10250-731 1.5 in. H x 30 in. W x 9 ft. 11 1/2 in. L, black 335148 10250-737 1.5 in. H x 36 in. W x 9 ft. 11 1/2 in. L, black Use to create smooth 90 degree horizontal-to-vertical transition in cable runway pathways. Match to the width of the connecting cable runway. FEATURES • Inside radius bend turns up from horizontal runway • Outside radius bend turns down from horizontal runway • Made of .065 in. thick tubular steel bar, 1.5 in. high x 0.375 in. wide • Three cross members welded at approximately 23 degree increments • Requires two cable runway butt-splice kits for installation • Painted finishes only • Packaged individually • Other colors and widths available Anixter No. Vendor No. Description 174194 10724-712 Inside bend 12 in. W, black 174196 10724-718 Inside bend 18 in. W, black 174184 10723-712 Outside bend 12 in. W, black 174186 10723-718 Outside bend 18 in. W, black Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.103 Ladder Rack Cable Runway Chatsworth Products, Inc. (CPI) Runway, Cable;Ladder Rack/3822 Runway, Cable;Ladder Rack/2528 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Cable Runway Corner Brackets Cable Runway Junction Splice Kits CHATSWORTH PRODUCTS INC (CPI) PR6809V2-143892.eps CHATSWORTH PRODUCTS INC (CPI) pr5202V2-143865.eps Used with junction splice kits to create a smooth radius transition for cables at X-, T- Creates a T-shaped intersection between two pieces of cable runway or between or L-shaped intersections. cable runway and a cable runway radius bends. Use with cable runway corner FEATURES brackets. Use the cable runway E-bend to create an L-shaped intersection (right or • Choose from two sizes left turn). • Includes installation hardware FEATURES • Corner bracket is painted, installation hardware is zinc with gold finish • All parts are zinc-plated with gold or black finish • Other colors available • Sold in pairs, kits include all hardware for one pair of splices Anixter No. Vendor No. Description • Heavy-duty versions require drilling of cable runway side stringers 249561 11959-715 15.5 in. x 15.5 in., black Anixter No. Vendor No. Description 249562 11959-724 24.2 in. x 24.2 in., black 034155 11302-001 Junction splice kit, gold Runway, Cable;Ladder Rack/2530 249445 11302-701 Junction splice kit, black Index1.Support and Supplies//Physical Support Structure//Accessories 131823 11298-001 Heavy-duty junction splice, gold Cable Runway Butt-splice Kits 263020 11298-701 Heavy-duty junction splice, black D CHATSWORTH PRODUCTS INC (CPI) pr5200V2-143864.eps 193830 16302-001 Junction splice kit, UL Classified, gold 249446 16302-701 Junction splice kit, UL Classified, black Runway, Cable;Ladder Rack/13413 Index1.Support and Supplies//Physical Support Structure//Accessories PatchRack CHATSWORTH PRODUCTS INC (CPI) PR12033V2-21856.eps Creates a rigid end-to-end connection between cable runway, cable runway E-bends and cable runway radius bends. FEATURES • All parts are zinc-plated with gold or black finish • Sold in pairs, kits include all hardware for one pair of splices • Heavy-duty versions require drilling of cable runway side stringers The PatchRack is a miniature two-post rack that can be attached to runway to save Anixter No. Vendor No. Description rack-mount space by placing patch panels or interconnect equipment above the rack 034154 11301-001 Butt-splice kit, gold or cabinet. Use to create a zone network in a data center. Attaches to all CPI cable 249442 11301-701 Butt-splice kit, black runway, but optimized for 3/8 in. wide by 1 1/2 in. high side stringers or cross members. 131843 11299-001 Heavy-duty butt-splice kit, gold 267387 11299-701 Heavy-duty butt-splice kit, black FEATURES 183872 16301-001 Butt-splice kit, UL Classified, gold • Attaches to the cable runway side stringer (shown) or cross-member 249444 16301-701 Butt-splice kit, UL Classified, black • Supports 19 in. wide rack-mount equipment • Holds up to 60 lb. Anixter No. Vendor No. Description 306952 13395-704 4U with 7 in. side stringer brackets, black 331586 13395-708 8U with 7 in. side stringer brackets, black Request the latest literature and guides from Anixter. 4.104 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Ladder Rack Cable Runway Chatsworth Products, Inc. (CPI) Runway, Cable;Ladder Rack/3821 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description 331587 13394-704 4U with cross-member brackets, black Cable Runway Elevation Kits 331588 13394-708 8U with cross-member brackets, black CHATSWORTH PRODUCTS INC (CPI) PR6810V2-36186.eps ACCESSORIES Anixter No. Vendor No. Description 331590 13399-702 Cross-member hardware kit 443319 13396-704 D-Rings for 4U rack, six rings, black 444273 13396-708 D-Rings for 8U rack, 10 rings, black Runway, Cable;Ladder Rack/2536 Index1.Support and Supplies//Physical Support Structure//Accessories Cable Runway Radius Drops CHATSWORTH PRODUCTS INC (CPI) PR6812V2-143894.eps When cable runway is supported from the top of racks or cabinets, the Cable Runway Elevation Kit adds 2 to 6 inches of space between the top of the rack or cabinet and the support surface of the cable runway. The extra space allows a smoother transition for cables into the vertical managers on the racks/cabinets. The kit may also be used on racks and cabinets used side-by-side to compensate for a difference in height. FEATURES • Two elevation ranges: 2 in., 2.5 in., 3 in. and 4 in., 5 in., 6 in. • L-brackets are painted; hardware is zinc-plated with gold finish • Rack kits include two L-brackets and hardware, attach to rack-to-runway mounting plate Use to control the radius of premise cables entering or exiting cable runway. • Cabinet kits include four L-brackets and hardware, attach directly to cabinet FEATURES • Other colors available • Attach to Universal Cable Runway cross members or stringers ELEVATION KITS FOR RACKS • Cross member radius drop transitions out of the end or center of the runway Anixter No. Vendor No. Description • Specify cross member radius drop to match cable runway width • Add movable cross members (Part Nos. 174221, 174222) if required 249557 10506-702 2 in. to 3 in. H, black • Stringer radius drop transitions out of the side of the runway 545544 10506-706 4 in. to 6 in. H, black • Painted finishes only ELEVATION KITS FOR CABINETS • Packaged individually Anixter No. Vendor No. Description • Other colors and widths available 249560 10506-712 2 in. to 3 in. H, black Anixter No. Vendor No. Description 249559 10506-716 4 in. to 6 in. H, black 220228 12100-710 12 in. W cross-member radius drop, use with 12115-712, black 220233 12100-716 18 in. W cross-member radius drop, use with 12115-718, black 174214 12101-701 Stringer radius drop (Universal Cable Runway), black 174221 12115-712 12 in. W, movable cross member, black 174222 12115-718 18 in. W, movable cross member, black Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.105 Ladder Rack Cable Runway Chatsworth Products, Inc. (CPI) Runway, Cable;Ladder Rack/11490 Runway, Cable;Ladder Rack/2529 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Rack-to-runway Mounting Plate Using J-bolts Cable Runway Triangular Support Brackets CHATSWORTH PRODUCTS INC (CPI) PR6817V2-143897.eps CHATSWORTH PRODUCTS INC (CPI) PR20303V2-71445.eps Secures cable runway to the top of Standard and Universal equipment racks. J-bolts hook under the mounting plate to secure the plate to the rack's top angles. Mounts Support cable runway along the length of a wall. Use one triangular bracket every either parallel or perpendicular. 5 ft. of span. FEATURES FEATURES • Various sizes match to runway width and rack channel depth • Select width to match the width of cable runway to be supported • Kit consists of: • Triangular bracket is painted, hardware parts are zinc-plated with gold finish - one mounting plate • Sold individually, kit includes triangular bracket and assembly hardware - four J-bolts, 5/16-18 x 2-1/4 in. • Wall installation hardware is not included - four hex nuts, 5/16-18 • Other colors and widths available - four split-lock washers, 5/16 in. • Other sizes and finishes available Anixter No. Vendor No. Description 184196 11746-712 12 in. wide, black Anixter No. Vendor No. Description 184197 11746-718 18 in. wide, black 164393 10595-712 9 in. to 12 in. runway width, 3 in. deep rack channel, steel, black Runway, Cable;Ladder Rack/2533 Index1.Support and Supplies//Physical Support Structure//Accessories 184177 10595-718 15 in. to 18 in. runway width, 3 in. deep D Cable Runway Vertical Wall Bracket rack channel, steel, black 174228 12121-712 10 in. to 12 in. runway width, 6 in. deep CHATSWORTH PRODUCTS INC (CPI) PR6822V2-143901.eps rack channel, aluminum, black 174229 12121-718 15 in. to 18 in. runway width, 6 in. deep rack channel, aluminum, black Runway, Cable;Ladder Rack/2535 Index1.Support and Supplies//Physical Support Structure//Accessories Cable Runway Threaded Rod Ceiling Support Kit CHATSWORTH PRODUCTS INC (CPI) PR6820V2-143899.eps Use to attach cable runway vertically against a wall. FEATURES • Brackets are zinc-plated with gold finish or painted black • Sold in pairs, support runway every 5 ft. of span • Installation hardware not included Anixter No. Vendor No. Description 132290 10608-001 Vertical wall brackets, one pair, gold Order two kits for every 5 ft. of span to support cable runway from a concrete ceiling. 425319 10608-701 Vertical wall brackets, one pair, black Ceiling anchors must be ordered separately. FEATURES • Includes a ceiling bracket, a runway bracket, 6 ft. of threaded rod and hardware • Brackets, threaded rod and hardware are zinc-plated with gold finish • Sold individually, use two kits every 5 ft. of span • Ceiling attachment hardware not included Anixter No. Vendor No. Description 131809 11310-003 5/8 in. rod, gold Request the latest literature and guides from Anixter. 4.106 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Ladder Rack Cable Runway Chatsworth Products, Inc. (CPI) Runway, Cable;Ladder Rack/2525 Runway, Cable;Ladder Rack/2534 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Cable Runway Cable Runway Wall Angle Support Kit Cable Runway End Caps CHATSWORTH PRODUCTS INC (CPI) pr5209V2-36177.eps CHATSWORTH PRODUCTS INC (CPI) PR6811V2-143893.eps Used to support the end of a piece of cable runway against a wall. Cover the exposed ends of cable runway to protect cable and personnel from potentially sharp edges. FEATURES FEATURES • Specify wall angle by width of runway to be supported • Wall angle is painted, hardware parts are zinc-plated with gold finish • Made of fire-retardant flat black rubberized material • Sold individually, kit includes wall angle and J-bolt hardware • Sold in pairs • Wall installation hardware not included Anixter No. Vendor No. Description • Other colors and widths available 131772 10642-001 1 pair, black Anixter No. Vendor No. Description 182845 11421-712 12 in. wide, black 182237 11421-718 18 in. wide, black Runway, Cable;Ladder Rack/2532 Index1.Support and Supplies//Physical Support Structure//Cable Runway Cable Runway Foot Kit CHATSWORTH PRODUCTS INC (CPI) pr5212V2-230430.eps Attach the end of cable runway to the floor. FEATURES • L-shaped brackets have a painted finish • Butt-splice Kit (11301-001) included; gold finish • Floor installation hardware is not included • Other colors available Anixter No. Vendor No. Description 164165 11309-701 Black Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.107 Ladder Rack Cable Runway Cablofil ./Runway, Cable;Ladder Rack/17895 Index1.Support and Supplies//Physical Support Structure//Cable Runway PW Cable Tray CABLOFIL The PW line of cable tray products is offered in a wide variety of sizes, designs and finishes to meet exacting industry standards. Choose from an extensive selection of rail, rung and bottom styles that are available in a variety of finishes. A complete cable tray system includes fittings, accessories, supports and hardware. PW's line of cable tray offers the following components to complete your system: straight sections, fittings, splices and connectors, covers, divider strips, support hangers and brackets and grounding and bonding accessories. Contact your local sales representative for ordering information. D Request the latest literature and guides from Anixter. 4.108 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Ladder Rack Cable Runway CommScope Solutions ./Runway, Cable;Ladder Rack/16474 Index1.Support and Supplies//Physical Support Structure//Racks Anixter No. Vendor No. Description Material ID Cable Runways 372166 CRDK-12W Cable radius drop kit for 760083956 12 in. W ladder rack COMMSCOPE 372167 CRDK-18W Cable radius drop kit for 760083964 When space is an issue, customize your computer, telecommunications or data center 18 in. W ladder rack with CommScope's Cable Runway solution. Cable Runway is part of CommScope's 372168 CRRP-6H Cable retaining post, 6 in. H, 760083972 complete cable management solution designed to meet your needs. This overhead one each mounting system comes in a variety of widths, helps to prevent tangling, and 372169 CRRP-8H Cable retaining post, 8 in. H, 760083980 provides the cable organization necessary to facilitate changes. one each STRAIGHT SECTIONS 372170 CRRP-10H Cable retaining post, 10 in. 760083998 H, one each Anixter No. Vendor No. Description Material ID 372172 CRPECK Protective end cap kit, two 760084012 372143 CR-SLR-6L6W 6 ft. L x 6 in. W 760085597 caps, black rubber 372144 CR-SLR-6L12W 6 ft. L x 12 ft. W 760085605 372173 CRFK Foot kit 760084020 372145 CR-SLR-6L18W 6 ft. L x 18 in. W 760085613 372174 CRJBMK J-bolt mounting kit 760084038 372146 CR-SLR-6L24W 6 ft. L x 24 in. W 760085621 372175 CRTJSK T-junction splice kit 760084046 372147 CR-SLR-10L6W 10 ft. L x 6 in. W 760085639 372027 CRR2RRMK Ladder rack to relay rack 760084053 372148 CR-SLR-10L12W 10 ft. L x 12 in. W 760085647 mounting kit, 19 in. W x 372025 CR-SLR-10L18W 10 ft. L x 18 in. W 760085654 5.375 in. D 372149 CR-SLR-10L24W 10 ft. L x 24 in. W 760085662 372176 CRTR625-6L 5/8 in. threaded rod, 760084061 90 DEGREE RADIUS FLAT CORNER BEND 11 UNC-2A, 6 ft. L, Anixter No. Vendor No. Description Material ID clear zinc 372150 CR90FCB-6W 6 in. W 760085522 372177 CRTR360-6L 3/8 in. threaded rod, 760084079 16 UNC-2A, 6 ft. L, 372151 CR90FCB-12W 12 in. W 760085530 clear zinc 372029 CR90FCB-18W 18 in. W 760085548 372178 CRTWSBK-6W Triangular wall support 760084087 372152 CR90FCB-24W 24 in. W 760085555 bracket kit, 6 in. W 90 DEGREE RADIUS INSIDE CORNER BEND 372179 CRTWSBK-12W Triangular wall support 760084095 Anixter No. Vendor No. Description Material ID bracket kit, 12 in. W 372153 CR90ICB-6W 6 in. W 760085670 372180 CRTWSBK-18W Triangular wall support 760084103 372154 CR90ICB-12W 12 in. W 760085688 bracket kit, 18 in. W 372155 CR90ICB-18W 18 in. W 760085696 372181 CRTWSBK-24W Triangular wall support 760084111 372156 CR90ICB-24W 24 in. W 760085704 bracket kit, 24 in. W 372182 CRVALS Variable angle ladder splice 760084129 90 DEGREE RADIUS OUTSIDE CORNER BEND 372183 CRVWBK Vertical wall bracket kit, 760084137 Anixter No. Vendor No. Description Material ID two brackets 372157 CR90OCB-6W 6 in. W 760086074 372184 CR6-12WRSK Wall rail support kit, 6 in. - 760084145 372158 CR90OCB-12W 12 in. W 760086082 12 in. 372159 CR90OCB-18W 18 in. W 760086090 372026 CR15-18WRSK Wall rail support kit, 15 in. - 760084152 372160 CR90OCB-24W 24 in. W 760086108 18 in. 372185 CR12-24WRSK Wall rail support kit, 24 in. 760084160 ACCESSORIES Anixter No. Vendor No. Description Material ID 372028 CRBSK Butt splice kit 760083899 372161 CRCMK3-8TR Ceiling mounting kit for 760083907 3/8 in. threaded rod 372162 CRCMK5-8TR Ceiling mounting kit for 760083915 5/8 in. threaded rod 372163 CRSBK5-8TR Support bracket kit for 760083923 5/8 in. threaded rod 372164 CRSMCRDK Side-mount cable radius 760083931 drop kit, fits all sizes 372165 CRDK-6W Cable radius drop kit for 760083949 6 in. W ladder rack Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.109 Ladder Rack Cable Runway Cooper B-Line ./Runway, Cable;Ladder Rack/3803 Index1.Support and Supplies//Physical Support Structure//Cable Runway THREADED ROD SUPPORT KIT PR10082V2-143851.eps Cable Runway System COOPER B-LINE PR34415V2-254412.eps Anixter No. Vendor No. Description 324297 SB2116ABZ For use with 5/8 in.-11 threaded rod and Cooper B-Line offers an extensive line of cable runway and accessories, all designed 1 1/2 in. stringer runway, black to provide easy and cost-effective methods for supporting overhead and vertical zinc finish cable installations. Runways are available with 1 1/2 in. or 2 in. stringers, and 203159 SB2116AYZ For use with 5/8 in.-11 threaded rod and runway widths ranging from 4 in. to 36 in. 1 1/2 in. stringer runway, yellow zinc finish CABLE RUNWAY Anixter No. Vendor No. Description WALL SUPPORT KITS PR12048V2-25524.eps 280798 SB17U12BFB Tubular stringers/rungs, 12 in. W x 9 ft. 11 1/2 in. L, flat black, individually boxed 280799 SB17U18BFB Tubular stringers/rungs, 18 in. W x 9 ft. 11 1/2 in. L, flat black, individually boxed 280800 SB17U24BFB Tubular stringers/rungs, 24 in. W x 9 ft. 11 1/2 in. L, flat black, individually boxed 268231 SB1712FB Tubular stringers/C-channel rungs, 12 in. D W x 9 ft. 11 1/2 in. L, flat black 212478 SB1718YZ Tubular stringers/C-channel rungs, 18 in. W x 9 ft. 11 1/2 in. L, yellow zinc Wall support kits provide rigid and economical support for runways along the length 176002 SB1718TG Tubular stringers/C-channel rungs, 18 in. of wall and at the end of the run. Each kit includes bracket and runway attachment W x 9 ft. 11 1/2 in. L, telco gray hardware. (Order wall installation hardware separately) 428870 SB13AL12FB Aluminum 1.5 in. tall stringers/rungs with Anixter No. Vendor No. Description removable rung, 12 in. W x 9 ft. 11 1/2 in. 268233 SB211312FB 12 in. wide runway wall support kit, fits a L, flat black variety of stringer sizes, flat black 430214 SB13AL24FB Aluminum 1.5 in. tall stringers/rungs with 172346 SB211312TG 12 in. wide runway wall support kit, fits a removable rung, 24 in. W x 9 ft. 11 1/2 in. variety of stringer sizes, telco gray L, flat black 172345 SB211312YZ 12 in. wide runway wall support kit, fits a CONNECTION AND BEND KITS PR12047V2-25521.eps variety of stringer sizes, yellow zinc 268236 SB211318FB 18 in. wide runway wall support kit, fits a variety of stringer sizes, flat black 205341 SB211318TG 18 in. wide runway wall support kit, fits a variety of stringer sizes, telco gray 245144 SB211318YZ 18 in. wide runway wall support kit, fits a variety of stringer sizes, yellow zinc 268239 SB21312KFB 6 in. to 12 in. wide runways wall support Anixter No. Vendor No. Description kit, bracket with J-bolts, flat black 158836 SB2101AYZ Horizontal tee splice kit, yellow zinc 172327 SB21312KTG 6 in. to 12 in. wide runways wall support 280801 SB2101ABZ Horizontal tee splice kit, black zinc kit, bracket with J-bolts, telco gray 280802 SB2106ABZ End (foot) suuport kit, black zinc 172326 SB21312KYZ 12 in. wall support kit, bracket with 280803 SB2107BZ Straight stringer junction kit, black zinc J-bolts, yellow zinc 269096 SB2107YZ Straight stringer junction kit, yellow zinc 280805 SB21318KFB 12 in. to 18 in. wall support kit, bracket 324296 SB2110ABZ Adjustable vertical bend kit, black zinc with J-bolts, flat black 158833 SB2110AYZ Adjustable vertical bend kit, yellow zinc Request the latest literature and guides from Anixter. 4.110 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Ladder Rack Cable Runway Cooper B-Line / Runway, Cable;Ladder Rack/10500 Index1.Support and Supplies//Physical Support Structure//Cable Runway //////RELAY RACK SUPPORT KITS PR10083V2-143852.eps Redi-Rail Cable Tray COOPER B-LINE PR10074V2-107349.eps Designed to secure cable runway parallel or perpendicular to the 3 in. deep relay rack top angles. Redi-Rail Runway is an aluminum, bolted system with moveable and removable rungs Anixter No. Vendor No. Description for on-site flexibility. 268243 SB213312FB 12 in. relay rack support kit, flat black 268245 SB213318FB 18 in. relay rack support kit, flat black CABLE TRAY Economical aluminum cable support system designed for easy and economical installation and field modifications. Anixter No. Vendor No. Description 268271 H15AR0912144 5 in. H x 12 in. W x 12 in. L, aluminum cable tray, 9 in. rung spacing BENDS Anixter No. Vendor No. Description 268272 H15AR1290HB12 5 in. H x 12 in. W, 90° horizontal bend, 12 in. radius 268273 H15AR1290VO12 5 in. H x 12 in. W, 90° vertical outside bend, 12 in. radius 268274 H15AR1290VI12 5 in. H x 12 in. W, 90° vertical inside bend, 12 in. radius 268275 H15AR12HT12 5 in. H x 12 in. W, horizontal tee SPLICES Anixter No. Vendor No. Description 268276 9AR005 Standard splice 268277 9AR035 Flex-mount splice 268278 9AR055 Tray-to-box splice 268279 9AR025 Vertical adjustable splice 268280 9AR965 Reversing splice 268281 9AR015 Expansion splice BRACKETS, FITTINGS AND HARDWARE Anixter No. Vendor No. Description 268282 9930 Bonding jumper 268283 9ZNR238 Hanger rod bracket 3/8 in. 268284 9ZNMB15 Mounting bracket 268285 9AR104W Drop out 268286 9A086W Blind end 268287 UR4A12 Universal fitting Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.111 Wire Basket Cable Runway Cablofil ./Runway, Cable;Wire Basket/2624 Index1.Support and Supplies//Physical Support Structure//Raceway EASY PACK Easy Pack is a conveniently packaged, all inclusive and ready to install cable Cablofil Tray - Straight Sections management system. CABLOFIL PR4989V2-107370.eps Anixter No. Vendor No. Description 375908 PACKCF 54/50EZ Contains six 78 in. L sections of 2 in. H x 2 in. W x 2 in. D tray and 12 preclick splices 375912 PACKCF 54/100EZ Contains four 78 in. L sections of 2 in. H x 4 in. W x 2 in. D tray and eight preclick splices 375918 PACKCF 54/150EZ Contains four 78 in. L sections of 2 in. H x 6 in. W x 2 in. D tray and eight preclick splices 375921 PACKCF 54/200EZ Contains four 78 in. L sections of 2 in. H x Cablofil cable tray is the revolutionary system constructed of precision-engineered, 8 in. W x 2 in. D tray and eight high-quality, welded steel wire. The Cablofil system includes everything to make preclick splices installation effortless and it adapts easily as your cable management needs grow and 375923 PACKCF 54/300EZ Contains four 78 in. L sections of 2 in. H x change. The FAS support system is exclusively designed with a versatile range of 12 in. W x 2 in. D tray, eight preclick profiles and brackets. This innovative system dramatically reduces installation time splices and four SWK bolts by utilizing a simple one-step process that requires no screws, bolts or special tools. "T" welding the lateral wires to the top edge wire creates a "Safe-T-Edge" which Runway, Cable;Wire Basket/2581 Index1.Support and Supplies//Physical Support Structure//Accessories minimizes the risk of fraying cables and also protects installers from sharp wire Cablofil Tray Standard Support Systems ends. The optimized wire size design makes Cablofil cable tray durable and extremely strong. CABLOFIL Look to Cablofil for the most complete line of support hardware for walls, ceilings, CABLOFIL CABLE TRAY floors and cabinets. Many brackets feature their patented FAS support system, Available in 1 in., 2 in., 4 in. and 6 in. depths. Available in widths ranging from 2 in. securing Cablofil cable tray without nuts and bolts. to 24 in. Standard 10 ft. lengths. Available in: Electro Zinc (EZ), Hot-Dipped D Galvanized (GC), 304L Stainless Steel (IN), 316L Stainless Steel (IN), or durable UL SF CENTER HANGER PR23671V2-168478.eps Classified powder coated colors: Black (BL) and Custom Painted Color (PE). "T" welded design creates a "Safe-T-Edge" which is easy on installers and cables. Anixter No. Vendor No. Description 220299 ZF30/50EZ 10 ft. L x 2 in. W x 1 in. D, tray 220284 CF30/100EZ 10 ft. L x 4 in. W x 1 in. D, tray 220286 CF30/150EZ 10 ft. L x 6 in. W x 1 in. D, tray 252779 CF30/200EZ 10 ft. L x 8 in. W x 1 in. D, tray 220297 CF30/300EZ 10 ft. L x 12 in. W x 1 in. D, tray 199265 CF54/50EZ 10 ft. L x 2 in. W x 2 in. D, tray 199268 CF54/100EZ 10 ft. L x 4 in. W x 2 in. D, tray A part used for hanging 2 in. or 4 in. wide tray, with fold-over tabs that secure the 197632 CF54/150EZ 10 ft. L x 6 in. W x 2 in. D, tray tray without additional hardware. Threaded rod, nuts and washers sold separately. 199273 CF54/200EZ 10 ft. L x 8 in. W x 2 in. D, tray Also available in Hot-Dipped Galvanized (GC), Black (BL), and Custom Painted Color 197633 CF54/300EZ 10 ft. L x 12 in. W x 2 in. D, tray (PE) finishes. 198369 CF54/450EZ 10 ft. L x 18 in. W x 2 in. D, tray Anixter No. Vendor No. Description 198370 CF54/500EZ 10 ft. L x 20 in. W x 2 in. D, tray 400145 SF50PG 2 in. center hanger, finish: pre-galvanized 197634 CF54/600EZ 10 ft. L x 24 in. W x 2 in. D, tray 349519 SF100PG 4 in. center hanger, finish: pre-galvanized 332137 CF105/100EZ 10 ft. L x 4 in. W x 4 in. D, tray 199278 CF105/150EZ 10 ft. L x 6 in. W x 4 in. D, tray 199277 CF105/200EZ 10 ft. L x 8 in. W x 4 in. D, tray 199284 CF105/300EZ 10 ft. L x 12 in. W x 4 in. D, tray 213378 CF105/450EZ 10 ft. L x 18 in. W x 4 in. D, tray 272037 CF105/500EZ 10 ft. L x 20 in. W x 4 in. D, tray 220316 CF105/600EZ 10 ft. L x 24 in. W x 4 in. D, tray 332138 CF150/300EZ 10 ft. L x 12 in. W x 6 in. D, tray 234350 CF150/450EZ 10 ft. L x 18 in. W x 4 in. D, tray 234354 CF150/500EZ 10 ft. L x 20 in. W x 4 in. D, tray 332139 ZF150/600 10 ft. L x 24 in. W x 6 in. D, tray Request the latest literature and guides from Anixter. 4.112 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Wire Basket Cable Runway Cablofil FAS CENTER HANGER PR22431V2-132775.eps FAS L BRACKET PR12055V2-108683.eps A part used to suspend tray from the ceiling using only threaded rod with a For installation onto walls and under-floor pedestals. Patented FAS-style attachment suspension tube to protect the cables. Threaded rod, nuts and bolts are sold holds cable tray secure without nuts and bolts. Also available in Hot-Dipped separately. Also available in Hot-Dipped Galvanized (GC), Stainless Steel (316L), Galvanized (GC), Stainless Steel (316L), Black (BL), and Custom Painted Color Black (BL), and Custom Painted Color (PE) finishes. (PE) finishes. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 213732 FASPCH300PG FAS center hanger, 12 in. L, one/pk., 208965 FASL100PG FAS L bracket 4 in. L, finish: pre-galvanized finish: pre-galvanized 213380 FASPCH450PG FAS center hanger, 18 in. L, one/pk., 199340 FASL200PG FAS L bracket 8 in. L, finish: pre-galvanized finish: pre-galvanized 220761 FASPCH600PG FAS center hanger, 24 in. L, one/pk., 199342 FASL300PG FAS L bracket 12 in. L, finish: pre-galvanized finish: pre-galvanized FAS PROFILE PR12054V2-108670.eps AS TRAPEZE HANGING CLIP PR22434V2-132805.eps For trapeze-hung installations or use on walls, floors and cabinets. Patented For trapeze-hung installations. Use with 1/4 in., 3/8 in. or 1/2 in. threaded rod. FAS-style attachment holds cable tray secure without nuts and bolts. For Cablofil tray can be detached on one side to easily add cables. Also available in trapeze-hung installations, use 4 in. longer profile than tray width. Can be used with Hot-Dipped Galvanized (GC), Stainless Steel (316L), Black (BL), and Custom Painted up to 3/8 in. threaded rod. Also available in Hot-Dipped Galvanized (GC), Stainless Color (PE) finishes. Steel (316L), Black (BL), and Custom Painted Color (PE) finishes Anixter No. Vendor No. Description Anixter No. Vendor No. Description 197643 ASPG Trapeze clip, 50/pk., 198645 FASP200PG FAS profile 8 in. L, finish: pre-galvanized finish: pre-galvanized 213731 FASP300PG FAS profile 12 in. L, finish: pre-galvanized 199345 FASP400PG FAS profile 16 in. L, finish: pre-galvanized 213376 FASP550PG FAS Profile 22 in. L, finish: pre-galvanized 241025 FASP700PG FAS Profile 28 in. L, cable runway wire mesh profile, finish: pre-galvanized Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.113 Wire Basket Cable Runway Cablofil Runway, Cable;Wire Basket/15441 Index1.Support and Supplies//Physical Support Structure//Cable Runway (continued) Cablofil Tray Standard Support Systems Cablofil Under Floor Management Systems CAT30/41 SNAP-IN WALL-HANGER SUPPORT PR22435V2-132793.eps CABLOFIL Cablofil/Legrand offers a wide variety of options for raised access floor installations, the newest being the UFS Under Floor Cable Management System. UFS is independently supported so that it does not void the warranty of the raised access floor and it is engineered with 2 ft. tray sections so that it can be installed entirely through the floor openings. UFS UNDER FLOOR SUPPORT BRACKET PR22437V2-132798.eps Keeps 2 in. wide tray secure when attaching to supports. No screws are required for tray attachment; they just snap into place. Also available in Hot-Dipped Galvanized (GC), Stainless Steel (316L), Black (BL), and Custom Painted Color (PE) finishes. Anixter No. Vendor No. Description 250518 CAT30/41PG Snap-in wall hanger support, finish: pre-galvanized C50 WALL-MOUNT ATTACHMENT PR22436V2-132783.eps Use a single support assembly for tray widths up to 20 in. Use two supports for tray widths up to 24 in. Patented FAS-style attachment secures tray without nuts and bolts. Predrilled mounting holes make installations easy. Tray is supported independently of raised floor systems. 4 in., 6 in., 8 in. and 12 in. heights now available in widths up to 20 in. Contact your local sales representative for further details. Anixter No. Vendor No. Description D 213374 UFS150/200PG 6 in. under floor support, finish: pre-galvanized UFFS UNDER FLOOR FIBERGLASS SUPPORT STAND PR23666V2-168470.eps Attaches tray up to 4 in. wide to walls, cabinets or machinery. The fold-over tabs secure the tray without additional hardware. Slotted mounting holes make for adjustable installations. Also available in Hot-Dipped Galvanized (GC), Stainless Steel (316L), Black (BL), and Custom Painted Color (PE) finishes. Anixter No. Vendor No. Description 213725 C50EZ Wall-mount attachment, finish: Electro Zinc Use a single support assembly for tray widths up to 20 in. Use two supports for tray widths up to 24 in. Patented FAS-style attachment secures tray without nuts and bolts. Predrilled mounting holes make installations easy. Tray is supported independently of raised floor systems. Fiberglass strut design keeps cable pathway insulated from floor deck. 4 in., 6 in., 8 in. and 12 in. heights now available in widths up to 20 in. Contact your local sales representative for further details. Anixter No. Vendor No. Description 400154 UFFS150/200PG 6 in. under floor support, finish: pre-galvanized Request the latest literature and guides from Anixter. 4.114 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Wire Basket Cable Runway Cablofil finishes include: Pre-Galvanized (PG), Hot-Dipped Galvanized (GC), Black Painted UC50 CABLE TRAY STANDOFF PR22438V2-132772.eps (BL) and Custom Painted (PE). Anixter No. Vendor No. Description 248721 UFCN150PG 6 in. under floor support clamp, finish: pre-galvanized 332185 UFCN200PG 8 in. under floor support clamp, finish: pre-galvanized 332186 UFCN300PG 12 in. under floor support clamp, finish: pre-galvanized UFSUPKIT UFS SUPPORT KIT PR22441V2-132787.eps Attaches 2 in. tray to floor and channel framing. Fold-over tabs secure tray without fasteners. Also available in Hot-Dipped Galvanized (GC), Stainless Steel (316L), Black (BL), and Custom Painted Color (PE) finishes. Anixter No. Vendor No. Description 250519 UC50PG Cable tray standoff, machine-mounting support, finish: pre-galvanized UFC UNDER FLOOR SUPPORT CLAMP PR22439V2-132802.eps Crossbars secure the tray with FAS style tabs and the heavy-duty legs have multiple mounting holes for almost infinite height adjustments. The attachment clips secure installation to raised access floor legs. Each kit support includes one crossbar, two leg supports and two leg attachment clips. Kit components may be ordered individually. Other standard kit heights available: 3.5 in., 14 in. and 24.8 in. Anixter No. Vendor No. Description 375943 UFSUPKIT200PG Under floor support kit, 7 in. H x 22 in. W 375944 UFSUPKIT300PG Under floor support kit, 10.6 in. H x Attaches FAS L brackets (sold separately) to access floor posts through one side of 22 in. W the U-bolt. Unique support plate works with square or round posts. Also available in UFCF2 UFS WIRE TRAY SECTION PR22442V2-132801.eps Black (BL), and Custom Painted Color (PE) finishes. Each clamp kit contains : U-bolt, two flange nuts and support plate. Anixter No. Vendor No. Description 198638 UFCPG Under floor support clamp, finish: pre-galvanized 375939 UFC550KITPG Under floor support kit, includes Cablofil part numbers: UFC (two), FASP550 (one) and EZBN1/4 (two), finish: pre-galvanized UFCN UNDER FLOOR CLAMP PR22440V2-132791.eps A 2 ft. long piece of tray designed to easily fit inside under floor grids. Tray is secured by using the UFS System. 2 in., 4 in. and 6 in. depths available in 6 in., 8 in., 12 in., 16 in. or 20 in. widths. Anixter No. Vendor No. Description 375945 UFCF2/54/300EZ UFS wire tray section, 24 in. L x 12 in. W x 2 in. D 375946 UFCF2/105/300EZ UFS wire tray section, 24 in. L x 12 in. W x 4 in. D 400155 UFCF2/150/300EZ UFS wire tray section, 24 in. L x 12 in. W x Attaches to round or square access floor posts. Use with FAS Profile for support of 6 in. D up to 12 in. Cablofil wire cable tray. Each UFCN comes with four mounting bolts and nuts. Standard finish: Electro Zinc coated for superior corrosion resistance. Other Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.115 Wire Basket Cable Runway Cablofil (continued) Cablofil Under Floor Management Systems Anixter No. Vendor No. Description 375988 RAD T 90 KIT 4EZ Radius tee kit for 4 in. tray, contains UFT 90° KITS UFT 90 PR22554V2-133732.eps hardware for one tee or two 90° bends, kit contains: two radius splices and Cablofil part numbers EZBN1/4 (ten), CE25 (eight) and CE40 (four) 375989 RAD T 90 KIT 6EZ Radius tee kit for 6 in. tray, contains hardware for one tee or two 90° bends, kit contains: two radius splices and Cablofil part numbers EZBN1/4 (ten), CE25 (eight) and CE40 (four) 307086 EZT90KITBL Tee or 90° kit, one/pk.; one kit makes one tee or two 90° bends Used to make a tee or 90° bend in an under floor system. Each 90° kit includes one 220794 SWKEZ Splice washer kit 50/pk. flat tray section and four securing clips. Kit components may be ordered individually. 400157 ED275RSKITEZ Tray reduction kit, each kit includes: SWK (two), ED275 (one), EZBN1/4 (two), Anixter No. Vendor No. Description CE25 (two). Use on tray differences up to 375947 UFT90KITEZ 24 in. L x 18 in. W tray and four 8 in. securing clips 400158 ED1100RSKITEZ Tray reduction kit, each kit includes: SWK Runway, Cable;Wire Basket/2580 Index1.Support and Supplies//Physical Support Structure//Accessories (two), ED1100 (one), EZBN1/4 (two), Cablofil Tray Splicing CE25 (two). Use on tray differences over 8 in. CABLOFIL 197641 CE25EZ 1 in. washer 50/pk. Cablofil offers a number of UL Classified splices for Cablofil cable tray to fill any 197642 CE30EZ 1 1/2 in. washer 50/pk. installation demand. All of the splice options are designed with one goal - to make 207726 CE40EZ 2 in. washer 50/pk. installation easy. Some of the splices require no tools for installation, yet each option offers a durable, strong splice that has been tested and proven in installations FASLOCK SPLICE PR12056V2-108687.eps D around the world. The EDRN fast splice is the strongest and fastest splice, which saves up to half of the install time compared to bolted connections. EDRN QUICK SPLICE PR4991V2-107362.eps FASLOCK is the easiest and fastest way to create sweeps and bends. Secure tray sweeps by bending built-in locking tabs with pliers. Its simple design makes installations a snap. Anixter No. Vendor No. Description Only two splices are needed to join Cablofil cable tray 2 in. deep by widths up to 332191 FASLOCK SPG Use FASLOCK S for CF54/100, 150, 200, 12 in. Use two splices on sides and one or two on the bottom for 18 in. to 24 in. tray. Special assembly tool is included in every bag of splices. Also available in other 300, CF105/100, 150, 200 finishes. Contact your sales representative for ordering information. 281386 FASLOCK XLPG Use FASLOCK XL for all other larger Anixter No. Vendor No. Description tray sizes 220377 EDRNEZ Fast splice EDRN 50/pk. - special assembly tool (EDRNTOOL) is included in every bag 375987 RAD T 90 KIT 2EZ Radius tee kit for 2 in. tray, contains hardware for one tee or two 90° bends, kit contains: two radius splices and Cablofil part numbers EZBN1/4 (ten), CE25 (eight) and CE40 (four) Request the latest literature and guides from Anixter. 4.116 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Wire Basket Cable Runway Cablofil Runway, Cable;Wire Basket/2582 Index1.Support and Supplies//Physical Support Structure//Accessories DO WATERFALL DROPOUT PR23673V2-168463.eps Cablofil Tray Additional Accessories CABLOFIL CABLOFIL CABLE TRAY COVERS PR12058V2-108680.eps Smooth solid construction provides protection for cables entering or exiting the cable pathway. Can be used to as a transition to other cable types. All attachment hardware is included. Upright flange support holes where required. Anixter No. Vendor No. Description 400167 DO54/150EZ Drop out portion accommodates 2 in. D x Cover eliminates dirt and dust build-up on cable. Built-in tabs attach cover to tray 6 in. W wire mesh cable tray without bolts. Field-fabricate the cover to fit changes in levels. Three piece cover kits are 10 ft. in length. Cablofil cover clips (CLIPFO2) as illustrated are sold separately. 400171 DO54/300EZ Drop out portion accommodates 2 in. D x Anixter No. Vendor No. Description 12 in. W wire mesh cable tray 220355 CVN50PG 2 in. W cover 400173 DO105/150EZ Drop out portion accommodates 4 in. D x 6 in. W wire mesh cable tray 220346 CVN150PG 6 in. W cover 400174 DO105/300EZ Drop out portion accommodates 4 in. D x 220351 CVN300PG 12 in. W cover 12 in. W wire mesh cable tray CABLEXIT ADDITIONAL ACCESSORIES Protects cables when exiting and entering tray. Snap-in mounting tabs eliminate the need for attachment hardware and speeds install time. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 197644 COUPFIL Bolt cutter 215963 CABLEXIT100PG Cable exit 220320 COT54PG 2 in. divider strip 265795 COT105PG 4 in. divider strip CABLE DROP OUT KIT 220318 COT150PG 6 in. divider strip Protects cables when exiting and entering tray. Slotted design allows for cable tie or 198642 DROPOUTPG Cable drop out velcro tiewrap cable attachment. 7 in. radius bend eases strain on cables. Each kit includes: two EZBN 1/4, two CE25 and one drop out. Finishes include: 198646 EZ JB5/16EZ J-bolt Pre-Galvanized (PG), Hot-Dipped Galvanized (GC), Stainless Steel (316L), Black (BL), 324078 GNDSB Split bolt grounding lug, accommodates and Custom Painted Color (PE) finishes. gauges AWG 4 -14 grounding wires Anixter No. Vendor No. Description 372544 GNDCL Grounding lug, accommodates gauges 419648 DROPOUTKITPG Cable Drop Out Kit AWG 2/0 to 6 grounding wires 332194 CCLMP52EZ Cable clamp 1.55 in. - 2.05 in. 400160 YC214KIT Yoke Clamp Kit, accommodates two 1/4 in. diameter tubes 400161 YC238KIT Yoke Clamp Kit, accommodates two 3/8 in. diameter tubes 400162 YC212KIT Yoke Clamp Kit, accommodates two 1/2 in. diameter tubes 400163 YC414KIT Yoke Clamp Kit, accommodates four 1/4 in. diameter tubes 400164 YC438KIT Yoke Clamp Kit, accommodates four 3/8 in. diameter tubes 281408 FS41DC FASTRUT connector 50/pk. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.117 Wire Basket Cable Runway Chatsworth Products, Inc. (CPI) ./Runway, Cable;Wire Basket/16490 Index1.Support and Supplies//Physical Support Structure//Cable Runway Anixter No. Vendor No. Description OnTrac Wire Mesh Cable Tray System 400280 34831-520 6 in. H x 20 in. W x 10 ft. L 400281 34831-524 6 in. H x 24 in. W x 10 ft. L CHATSWORTH PRODUCTS INC (CPI) PR24092V2-175119.eps OnTrac Wire Mesh Cable Tray System is also available in pre-galvanized or black powder coat paint finish. Contact your local sales representative for ordering information. Runway, Cable;Wire Basket/16491 Index1.Support and Supplies//Physical Support Structure//Cable Runway OnTrac Splice Options CHATSWORTH PRODUCTS INC (CPI) STANDARD SPLICE KIT PR24104V2-175120.eps CPI's OnTrac Wire Mesh Cable Tray System creates point-to-point pathways for network cabling in data centers, network equipment rooms and office spaces. The OnTrac Wire Mesh Cable Tray System can be cut and formed into smooth turns and transitions easily adapting to most locations. The tray provides excellent load bearing capability and protection for cables, can be used in plenum spaces and is UL Classified for suitability as an equipment grounding conductor. Choose from various supports to attach the tray to the ceiling, wall or under access floors. A variety of cable management accessories are also offered to protect and guide cables along Use to connect sections of wire mesh cable tray together end-to-end, at the pathway. intersections and turns. Each splice kit includes three components: a stamped washer with a 1/4-20 x 3/4 in. L fixed screw, a contoured splice washer and a FEATURES 1/4-20 flange nut. Finish: zinc electroplate • Constructed from 5 mm and 6 mm diameter steel wire that is welded into a 2 in. Anixter No. Vendor No. Description x 4 in. rectangular grid pattern 400282 34738-501 Standard Splice Kit, pack of 50 • Available in standard 10 ft. lengths and multiple widths and depths D • Cut and bend to form smooth curved transitions around obstacles SPLICE BAR PR24103V2-175096.eps • UL Classified for suitability as an equipment grounding conductor only. UL File E138966 • Zinc electroplate finish listed below; also available in pre-galvanized or painted with black powder coat paint • Side walls are 2 in., 4 in. and 6 in. high to support different cable fill capacities • Complete line of accessories available Use with splices from the Standard Splice Kit to create a more secure end-to-end Anixter No. Vendor No. Description connection between wire mesh cable tray sections. Attaches to the side of the tray 400260 34811-504 2 in. H x 4 in. W x 10 ft. L using three splice washers from the Splice Washer & Bolt Kit. Recommended for all trays that are 18 in. W or wider. Manufactured from steel. Dimensions: 125 in. W x 400261 34811-506 2 in. H x 6 in. W x 10 ft. L .75 in. H x 10.8 in. L. Finish: zinc electroplate 400262 34811-508 2 in. H x 8 in. W x 10 ft. L Anixter No. Vendor No. Description 400263 34811-512 2 in. H x 12 in. W x 10 ft. L 400283 34739-501 Splice Bar, pack of 50 400264 34811-516 2 in. H x 16 in. W x 10 ft. L 400265 34811-518 2 in. H x 18 in. W x 10 ft. L SPLICE WASHER & BOLT KIT PR24116V2-175101.eps 400266 34811-520 2 in. H x 20 in. W x 10 ft. L 400267 34811-524 2 in. H x 24 in. W x 10 ft. L 400268 34821-504 4 in. H x 4 in. W x 10 ft. L 400269 34821-506 4 in. H x 6 in. W x 10 ft. L 400270 34821-508 4 in. H x 8 in. W x 10 ft. L 400271 34821-512 4 in. H x 12 in. W x 10 ft. L 400272 34821-516 4 in. H x 16 in. W x 10 ft. L 400273 34821-518 4 in. H x 18 in. W x 10 ft. L Use with Splice Bar to connect wire mesh trays together end-to-end, secure tray to ceiling, wall and access floor supports or attach accessories to wire mesh cable 400274 34821-520 4 in. H x 20 in. W x 10 ft. L tray. Includes contoured splice washers, 1/4-20 x 3/4 in. L carriage bolts and a 400275 34821-524 4 in. H x 24 in. W x 10 ft. L 1/4-20 flange nuts. Finish: zinc electroplate 400276 34831-508 6 in. H x 8 in. W x 10 ft. L Anixter No. Vendor No. Description 400277 34831-512 6 in. H x 12 in. W x 10 ft. L 400284 34728-501 Splice Washer & Bolt Kit, pack of 50 400278 34831-516 6 in. H x 16 in. W x 10 ft. L 400279 34831-518 6 in. H x 18 in. W x 10 ft. L Request the latest literature and guides from Anixter. 4.118 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Wire Basket Cable Runway Chatsworth Products, Inc. (CPI) Runway, Cable;Wire Basket/16492 CLAMP WASHER PR24096V2-175094.eps Index1.Support and Supplies//Physical Support Structure//Cable Runway OnTrac Wire Mesh Cable Tray System Supports CHATSWORTH PRODUCTS INC (CPI) OnTrac can be supported from the floor, ceiling, wall or the tops of racks and cabinets. Several styles of supports are available. L SUPPORT BRACKET KIT PR24109V2-175155.eps Use to securely fasten two layers of wire mesh when connecting trays at 90° bends or intersections. Attaches to the tray using a 1/4-20 x 3/4 in. L carriage bolt and flange nut from the Carriage Bolt Hardware Kit. Finish: zinc electroplate Anixter No. Vendor No. Description 400285 34746-501 Clamp Washer, pack of 25 CARRIAGE BOLT HARDWARE KIT PR24115V2-175165.eps Use to support a wire mesh cable tray pathway along a wall or under a floor. Installation requires two 3/8 in. lag bolts and two flat washers for plywood backer boards or two 1/4 in. hex cap bolts, two flat washers and two appropriate anchors for concrete walls (ordered separately). Use the 16 in. W or smaller version to support cable tray from an access floor pedestal; attach to the pedestal with a single Pedestal Clamp Bracket Kit. Tray attaches to the L Support Bracket with two splice washers from the Splice Washer & Bolt Kit or use the fold-over tab at the end Use with Clamp Washer to connect wire mesh trays together. Includes 1/4-20 x of the bracket to secure the tray. Manufactured from steel. Dimensions: 2.4 in. W x 3/4 in. L carriage bolts and 1/4-20 flange nut. Finish: zinc electroplate 6 in. H. Finish: zinc electroplate Anixter No. Vendor No. Description Anixter No. Vendor No. Description 400286 34728-502 Carriage Bolt Hardware Kit, pack of 50 400288 34734-504 For 4 in. wide tray 400289 34734-508 For 8 in. wide tray 90 DEGREE SPLICE BAR KIT PR24102V2-175129.eps 400290 34734-512 For 12 in. wide tray 400291 34734-516 For 16 in. wide tray 400292 34734-520 For 20 in. wide tray 400293 34734-524 For 24 in. wide tray TRAPEZE SUPPORT BRACKET PR24113V2-175137.eps Use to create a secure 90° T- or L-shaped intersection between two wire mesh cable tray sections. Kit includes all hardware needed to make one 90° T-shaped or two L-shaped intersections (two 90° Splice Bars, eight contoured splice washers, four Clamp Washers and ten 1/4-20 x 3/4 in. L carriage bolts and 1/4-20 flange nuts). Manufactured from steel. Dimensions: 125 in. W x .75 in. H x 8.38 in. L. Zinc electroplate finish; hardware is zinc plated Anixter No. Vendor No. Description 400287 34740-501 90 Degree Splice Bar Kit OnTrack Wire Mesh Cable Tray System splice options are also available in Use to support wire mesh cable tray from the ceiling using a pair of threaded rods. black powder coat paint finish. Contact your local sales representative Installation requires a pair of 5/8 in., 1/2 in., 3/8 in. or 1/4 in. threaded rods, four hex nuts, two or four flat washers, two split lock washers and two appropriate for ordering information. anchors/ceiling clamps (order separately). Tray attaches to the Trapeze Support Bracket with two slice washers from the Splice Washer & Bolt Kit. Manufactured from steel. Dimensions: 2.4 in. W x 0.5 in. H. Finish: zinc electroplate Anixter No. Vendor No. Description 400294 34730-512 For 12 in. wide tray 400295 34730-516 For 16 in. wide tray 400296 34730-520 For 20 in. wide tray 400297 34730-524 For 24 in. wide tray Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.119 Wire Basket Cable Runway Chatsworth Products, Inc. (CPI) WALL-MOUNT ANGLE PR24108V2-175121.eps (continued) OnTrac Wire Mesh Cable Tray System Supports CENTER SUPPORT BRACKET PR24114V2-175122.eps Use to support the end of wire mesh cable tray against the wall. Installation requires two 1/4 in. lag bolts and two flat washers for plywood backer boards or two 1/4 in. Use to support wire mesh cable tray from the ceiling with a single 5/8 in. threaded hex cap bolts, two flat washers and two appropriate anchors for concrete walls rod. Tray attaches to the Center Support Bracket with two splice washers from the (ordered separately). Tray attaches to the Wall-Mount Angle with two splice washers Splice Washer & Bolt Kit or use fold-over tabs to secure the tray on all sizes except from the Splice Washer & Bolt Kit. Manufactured from steel. Dimensions: 2.0 in. H x the 4 in. W version. Manufactured from steel. Dimensions: 2.4 in. W x 7.5 in. H. 1.25 in. D. Finish: zinc electroplate Finish: zinc electroplate Anixter No. Vendor No. Description Anixter No. Vendor No. Description 400310 34735-504 For 4 in. wide tray 400298 34729-504 For 4 in. wide tray 400311 34735-508 For 8 in. wide tray 400299 34729-508 For 8 in. wide tray 400312 34735-512 For 12 in. wide tray 400300 34729-512 For 12 in. wide tray 400313 34735-516 For 16 in. wide tray 400301 34729-516 For 16 in. wide tray 400314 34735-520 For 20 in. wide tray 400302 34729-520 For 20 in. wide tray 400315 34735-524 For 24 in. wide tray 400303 34729-524 For 24 in. wide tray EDGE HANGER PR24112V2-175109.eps TRIANGLE SUPPORT BRACKET PR24110V2-175166.eps D Use in pairs to support wire mesh cable tray from the ceiling using threaded rod. Use to support a wire mesh cable tray pathway along a wall. Installation requires Installation requires a single 3/8 in. or 1/4 in. threaded rod, two hex nuts, one or two 3/8 in. lag bolts and two flat washers for plywood backer boards or two 1/4 in. two flat washers, one split lock washer and an appropriate anchor/ceiling clamp hex cap bolts, two flat washers and two appropriate anchors for concrete walls (ordered separately). The side of the tray is supported in the two J-shaped hooks at (ordered separately). Tray attaches to the Triangle Support Bracket with two splice the bottom of the hanger; use pliers to close hooks and secure tray once cable has washers from the Splice Washer & Bolt Kit or use the fold-over tab at the end of the been loaded. Use in pairs to support a single cable tray. Manufactured from steel. bracket to secure the tray. Manufactured from steel. Dimensions: 1.6 in. W. Finish: Dimensions: 1.5 in. W x 2.9 in. H x 1.2 in. D. Finish: zinc electroplate zinc electroplate Anixter No. Vendor No. Description Anixter No. Vendor No. Description 400316 34731-501 Edge Hanger, pack of 50 400304 34733-504 For 4 in. wide tray 400305 34733-508 For 8 in. wide tray 400306 34733-512 For 12 in. wide tray 400307 34733-516 For 16 in. wide tray 400308 34733-520 For 20 in. wide tray 400309 34733-524 For 24 in. wide tray Request the latest literature and guides from Anixter. 4.120 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Wire Basket Cable Runway Chatsworth Products, Inc. (CPI) PEDESTAL CLAMP BRACKET PR24106V2-175116.eps UNDER FLOOR SUPPORT PR24107V2-175162.eps Use with the L Support Bracket to support wire mesh cable tray from access floor Use to support wire mesh cable tray from the floor under an access floor. Attaches to pedestals under an access floor. Use one Pedestal Clamp Bracket Kit to attach a the floor with 1/4 in. hardware or adhesive. Tray attaches to the Under Floor Support 16 in. or smaller L Support Bracket to an access floor pedestal; floor height must be with a splice washer from the Splice Washer & Bolt Kit. Under Floor Supports can be at least 12 in. Pedestal Clamp Bracket Kit attaches to 1 in. to 2 in. round and square used in pairs to support wider trays. Manufactured from steel. Finish: pedestals (1-1/2 in. max when diagonally oriented on square pedestals); includes a zinc electroplate 3/8-16 x 4.9 in. L V-Bolt and installation hardware. Manufactured from steel. Anixter No. Vendor No. Description Dimensions: 4.8 in. W x 2.0 in. H x 1.0 in. D. Finish: zinc electroplate (V-bolt and installation hardware has a zinc finish) 400319 34736-543 3 in. H x 4 in. W x 7 in. D Anixter No. Vendor No. Description 400320 34736-546 6 in. H x 4 in. W x 8.6 in. D 400317 34737-501 Pedestal Clamp Bracket 400321 34736-583 3 in. H x 8 in. W x 7 in. D 400322 34736-586 6 in. H x 8 in. W x 8.6 in. D PEDESTAL CLAMP SUPPORT KIT PR24105V2-175148.eps 400323 34736-589 9 in. H x 8 in. W x 10.2 in. D RACK-MOUNT HOOK PR24111V2-175102.eps Use to support wire mesh cable tray from adjacent access floor pedestals. Kit includes two Pedestal Clamp Brackets, a 21.5 in. W tray support bracket, and 1/4 in. installation hardware. Tray attaches to the tray support bracket with two splice washers from the Splice Washer & Bolt Kit. Can be used to support multiple trays of varying widths with a combined width up to 20 in. W. Tray support bracket is manufactured from steel. Dimensions: 2.4 in. W x 0.5 in. H x 21.5 in. L. Finish: zinc Use to attach wire mesh cable tray to the top of a two-post or four-post CPI Rack electroplate (V-bolt and installation hardware has a zinc finish) System. Includes a Clamp Washer with a hook that attaches to the L-shaped top Anixter No. Vendor No. Description angle on CPI Rack Systems. Attach tray to the top of the rack in the parallel 400318 34737-502 Pedestal Clamp Support Kit (side-to-side) or perpendicular (front-to-back) orientation; parallel alignment may not be centered over the rack. Hook is manufactured from steel. Dimensions: 1 in. W x 1.3 in. H x 1.5 in. D. Finish: black powder coat paint Anixter No. Vendor No. Description 400324 34732-701 Rack-Mount Hook, pack of four OnTrac Wire Mesh Cable Tray System Supports are also available in black powder coat paint finish. Contact your local sales representative for ordering information. Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.121 Wire Basket Cable Runway Chatsworth Products, Inc. (CPI) Runway, Cable;Wire Basket/16493 Index1.Support and Supplies//Physical Support Structure//Cable Runway CABLE TRAY COVERS PR24098V2-175144.eps OnTrac Wire Mesh Cable Tray Accessories CHATSWORTH PRODUCTS INC (CPI) Several cable management accessories are available for OnTrac. Use radius drops to support cables as they exit and enter the cable pathway and covers to protect cables. The pathway can be divided to separate cables by type or zone and labeled for easy identification. Attach a ground wire to bond trays together and junction boxes to locate network or power connections along the side of the tray. Use to cover the top of a section of wire mesh cable tray to protect or hide cables. CABLE TRAY BOTTOM INSERT PR24097V2-175115.eps Anixter No. Vendor No. Description 400336 34744-504 For 4 in. wide tray 400337 34744-506 For 6 in. wide tray 400338 34744-508 For 8 in. wide tray 400339 34744-512 For 12 in. wide tray 400340 34744-516 For 16 in. wide tray 400341 34744-518 For 18 in. wide tray 400342 34744-520 For 20 in. wide tray 400343 34744-524 For 24 in. wide tray HORIZONTAL BEND RADIUS PR24100V2-175149.eps Use to cover the bottom of a section of wire mesh cable tray to protect or hide cables. Anixter No. Vendor No. Description 400325 34745-504 For 4 in. wide tray 400326 34745-506 For 6 in. wide tray 400327 34745-508 For 8 in. wide tray 400328 3D 4745-512 For 12 in. wide tray 400329 34745-516 For 16 in. wide tray 400330 34745-518 For 18 in. wide tray 400331 34745-520 For 20 in. wide tray Use to connect Cable Tray Dividers at intersections between two tray sections, soften 400332 34745-524 For 24 in. wide tray the inside radius of a sharp 90° bend or to create a protective barrier on an CABLE TRAY DIVIDER PR24099V2-175154.eps outside radius. Anixter No. Vendor No. Description 400344 34742-502 For 2 in. H tray 400345 34742-504 For 4 in. H tray 400346 34742-506 For 6 in. H tray Use to divide the internal area of a section of wire mesh cable tray to organize cables by type or zone. Anixter No. Vendor No. Description 400333 34743-502 For 2 in. H tray 400334 34743-504 For 4 in. H tray 400335 34743-506 For 6 in. H tray Request the latest literature and guides from Anixter. 4.122 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Wire Basket Cable Runway Chatsworth Products, Inc. (CPI) TOOL-LESS RADIUS DROP PR24101V2-175141.eps POWER BOX BRACKET PR24094V2-175114.eps Use to properly support cables as they exit or enter cable tray pathways. Provides a Use to attach a two-gang duplex junction box or other items to the side of wire mesh wide radius featuring tool-less attachment that requires no cutting of the tray cable tray, attach cable tray to the floor or to attach 4 in. W cable tray to the wall. during installation. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 400350 34748-501 Power Box Bracket 400347 34741-501 Tool-Less Radius Drop LABEL HOLDER PR24093V2-175125.eps LARGE RADIUS DROP PR24095V2-175100.eps Use to label a section of wire mesh cable tray to identify the pathway or a Use to properly support cables as the cables exit or enter cable tray pathway. drop location. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 400348 34747-501 Large Radius Drop 400351 34749-001 Label Holder, pack of 10 SPLIT BOLT GROUNDING CLAMP PR24091V2-175104.eps CABLE TRAY INSTALLATION TOOLS Cut wire mesh cable tray to fit and form pieces to match pathway requirements. Anixter No. Vendor No. Description 400352 34839-001 Bolt cutter style cable tray cutting tool Use to attach a ground conductor to wire mesh cable tray. Anixter No. Vendor No. Description 400349 34838-001 Split Bolt Grounding Clamp, pack of 10 Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.123 Wire Basket Cable Runway Cooper B-Line ./Runway, Cable;Wire Basket/2631 Index1.Support and Supplies//Physical Support Structure//Cable Runway Anixter No. Vendor No. Description FLEXTRAY Introduction 203934 FT2X18X10 10 ft. L x 18 in. W x 2 in. D 174342 FT2X20X10 10 ft. L x 20 in. W x 2 in. D COOPER B-LINE 203935 FT2X24X10 10 ft. L x 24 in. W x 2 in. D FLEXTRAY is now part of Cooper B-Line, the market leader in innovative, labor-saving 221310 FT4X4X10 10 ft. L x 4 in. W x 4 in. D solutions in cable management for datacom, industrial, control, security and 288203 FT4X6X10 10 ft. L x 6 in. W x 4 in. D electrical applications. 203936 FT4X8X10 10 ft. L x 8 in. W x 4 in. D Only FLEXTRAY offers 100 percent U.S. manufactured tray sizes up to 32 in. wide. 203937 FT4X12X10 10 ft. L x 12 in. W x 4 in. D Tray finishes include zinc-plated, pre-galvanized, painted, stainless and 203938 FT4X16X10 10 ft. L x 16 in. W x 4 in. D hot-dip galvanized. 203939 FT4X18X10 10 ft. L x 18 in. W x 4 in. D FLEXTRAY wire mesh cable tray can be formed into nearly any configuration by simply 203940 FT4X20X10 10 ft. L x 20 in. W x 4 in. D cutting the wires and bending into your preferred radius. Only FLEXTRAY offers the 203941 FT4X24X10 10 ft. L x 24 in. W x 4 in. D CleanShear and AirShear cutting tools. These cutting tools leave a blunt, flush and safe 248829 FT4X30X10 10 ft. L x 30 in. W x 4 in. D edge for applications where the tray is cut in the field. 248831 FT6X8X10 10 ft. L x 8 in. W x 6 in. D Another FLEXTRAY innovation is their UL Classifications. FLEXTRAY offers UL and CSA 248833 FT6X12X10 10 ft. L x 12 in. W x 6 in. D classification on over 33 different sizes of tray. Because FLEXTRAY uses a larger-gauge wire, it meets the cross-sectional area requirements of UL and CSA. FLEXTRAY can be 248835 FT6X16X10 10 ft. L x 16 in. W x 6 in. D used as an equipment ground conductor, without having to go back and add a 248837 FT6X18X10 10 ft. L x 18 in. W x 6 in. D secondary ground wire. 224055 FT6X20X10 10 ft. L x 20 in. W x 6 in. D Runway, Cable;Wire Basket/2515 248838 FT6X24X10 10 ft. L x 24 in. W x 6 in. D Index1.Support and Supplies//Physical Support Structure//Cable Runway FLEXTRAY Straight Sections BLACK FLEX-E-COAT FINISH This finish is compliant with NFPA 90A, (plenum-rated), and ASTM B117 for salt COOPER B-LINE PR23710V2-174743.eps spray testing. Anixter No. Vendor No. Description 203942 FT2X2X10 BLE 10 ft. L x 2 in. W x 2 in. D 203943 FT2X4X10 BLE 10 ft. L x 4 in. W x 2 in. D D 203944 FT2X6X10 BLE 10 ft. L x 6 in. W x 2 in. D 203945 FT2X8X10 BLE 10 ft. L x 8 in. W x 2 in. D 203946 FT2X12X10 BLE 10 ft. L x 12 in. W x 2 in. D 203947 FT2X16X10 BLE 10 ft. L x 16 in. W x 2 in. D 206618 FT2X18X10 BLE 10 ft. L x 18 in. W x 2 in. D 203948 FT2X20X10 BLE 10 ft. L x 20 in. W x 2 in. D FLEXTRAY offers patented solutions that allow the user/installer to quickly and 206619 FT2X24X10 BLE 10 ft. L x 24 in. W x 2 in. D efficiently install FLEXTRAY products in a variety of environments. FLEXTRAY is well 221311 FT4X4X10 BLE 10 ft. L x 4 in. W x 4 in. D suited for a variety of cabling installations including overhead, wall, closet 331610 FT4X6X10 BLE 10 ft. L x 6 in. W x 4 in. D and under floor. 206620 FT4X8X10 BLE 10 ft. L x 8 in. W x 4 in. D FEATURES 206621 FT4X12X10 BLE 10 ft. L x 12 in. W x 4 in. D • Largest range of sizes available 206622 FT4X16X10 BLE 10 ft. L x 16 in. W x 4 in. D • Depths of 1.5 in. to 8 in. and widths up to 32 in. 206623 FT4X18X10 BLE 10 ft. L x 18 in. W x 4 in. D • 33 classified trays that meet UL and CSA grounding requirements 206624 FT4X20X10 BLE 10 ft. L x 20 in. W x 4 in. D • Made in the USA 206625 FT4X24X10 BLE 10 ft. L x 24 in. W x 4 in. D • "T" welded safety edge on every size and configuration that protects both cable 248839 FT6X8X10BLE 10 ft. L x 8 in. W x 6 in. D and installer while loading tray • CleanShear and AirShear cutting tool provide smooth edges protecting your 248840 FT6X12X10BLE 10 ft. L x 12 in. W x 6 in. D cable investment 248841 FT6X16X10BLE 10 ft. L x 16 in. W x 6 in. D 248843 FT6X18X10BLE 10 ft. L x 18 in. W x 6 in. D ELECTROPLATED ZINC FINISH 248844 FT6X20X10BLE 10 ft. L x 20 in. W x 6 in. D This surface treatment is suitable for most indoor applications and may be used 248845 FT6X24X10BLE 10 ft. L x 24 in. W x 6 in. D outdoors in mild environments only. Anixter No. Vendor No. Description Other painted colors also available. Consult us for information. 174340 FT2X2X10 10 ft. L x 2 in. W x 2 in. D 174336 FT2X4X10 10 ft. L x 4 in. W x 2 in. D 171085 FT2X6X10 10 ft. L x 6 in. W x 2 in. D 174337 FT2X8X10 10 ft. L x 8 in. W x 2 in. D 171083 FT2X12X10 10 ft. L x 12 in. W x 2 in. D Request the latest literature and guides from Anixter. 4.124 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Wire Basket Cable Runway Cooper B-Line Runway, Cable;Wire Basket/2520 Runway, Cable;Wire Basket/2522 Index1.Support and Supplies//Physical Support Structure//Cable Runway Index1.Support and Supplies//Physical Support Structure//Cable Runway FLEXTRAY Ceiling Support Methods FLEXTRAY Wall Support Methods COOPER B-LINE PR28979V2-214345.eps COOPER B-LINE PR23709V2-168577.eps FLEXTRAY offers multiple ceiling support solutions that allow the installer to load FLEXTRAY offers seven wall support products. cable from the side. Side loading eliminates pulling that can damage cables and ELECTROPLATED ZINC GALVANIZED FINISH makes installations faster and more flexible for future changes. Anixter No. Vendor No. Description ELECTROPLATE ZINC-GALVANIZED FINISH 217073 4 L BRKT L-wall bracket for 4 in. width Anixter No. Vendor No. Description 217074 8 L BRKT L-wall bracket for 8 in. width 174368 2 IN CTR SUPT Center support hanger for FT2X2X10 217075 12 L BRKT L-wall bracket for 12 in. width 171091 TRAPEZE SUPT 2 Trapeze support clip 217041 16 L BRKT L-wall bracket for 16 in. width 174370 CTR HUNG CLP Center-hung trapeze clip 217076 20 L BRKT L-wall bracket for 20 in. width 333315 WB46H Flip Clip trapeze hanger 217077 24 L BRKT L-wall bracket for 24 in. width 415490 FTB06CT Center/Trapeze hanger for 6 in. tray 221349 4 C BRKT Wall/ceiling bracket, 4 in. width 415679 FTB08CT Center/Trapeze hanger for 8 in. tray 217047 8 C BRKT Wall/ceiling bracket, 8 in. width 405493 FTB12CT Center/Trapeze hanger for 12 in. tray 217048 12 C BRKT Wall/ceiling bracket, 12 in. width 415680 FTB16CT Center/Trapeze hanger for 16 in. tray 174353 Z BRKT Vertical/floor bracket 415681 FTB20CT Center/Trapeze hanger for 20 in. tray 392434 FTB6CSGLV Heavy-duty wall bracket for 4 in. and 413660 FTB24CT Center/Trapeze hanger for 24 in. tray 6 in. tray 392435 FTB8CSGLV Heavy-duty wall bracket for 8 in. tray BLACK POWDER COATED FINISH 392436 FTB12CSGLV Heavy-duty wall bracket for 12 in. tray Anixter No. Vendor No. Description 392437 FTB16CSGLV Heavy-duty wall bracket for 16 in. tray 206656 2 IN CTR SUPT BLE Center hanger for 2 in. width 392438 FTB18CSGLV Heavy-duty wall bracket for 18 in. tray 206633 TRAPEZE SUPT BLE Trapeze support clip 392439 FTB20CSGLV Heavy-duty wall bracket for 20 in. tray 206634 CTR HUNG CLP BLE Center-hung trapeze clip 392440 FTB24CSGLV Heavy-duty wall bracket for 24 in. tray 425038 WB46HFB Flip Clip trapeze hanger 425039 FTB06CTFB Center/Trapeze hanger for 6 in. tray BLACK FLEX-E-COAT FINISH 425041 FTB08CTFB Center/Trapeze hanger for 8 in. tray Anixter No. Vendor No. Description 425042 FTB12CTFB Center/Trapeze hanger for 12 in. tray 217034 4 L BRKT BLE L-wall bracket for 4 in. width 425043 FTB16CTFB Center/Trapeze hanger for 16 in. tray 217036 8 L BRKT BLE L-wall bracket for 6 in. and 8 in. width 425044 FTB20CTFB Center/Trapeze hanger for 20 in. tray 217038 12LBRKT BLE L-wall bracket for 12 in. width 425045 FTB24CTFB Center/Trapeze hanger for 24 in. tray 217040 16 L BRKT BLE L-wall bracket for 16 in. width 217042 20 L BRKT BLE L-wall bracket for 18 in. and 20 in. width 217045 24 L BRKT BLE L-wall bracket for 24 in. width 331777 4 C BRKT BLE Wall/ceiling bracket, 4 in. width 331778 8 C BRKT BLE Wall/ceiling bracket, 8 in. width 206645 12 C BRKT BLE Wall/ceiling bracket, 12 in. width 206654 Z BRKT BLE Vertical floor bracket Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.125 Wire Basket Cable Runway Cooper B-Line Runway, Cable;Wire Basket/2518 Index1.Support and Supplies//Physical Support Structure//Cable Runway • Divider strips • Support accessories FLEXTRAY Splice Options ELECTROPLATED ZINC FINISH COOPER B-LINE PR12073V2-21931.eps Anixter No. Vendor No. Description 211959 CLEANSHEAR CLEANSHEAR cutting tool 221355 CLEANSHEAR BEND Cutting tool with bender 216884 GROUND BOLT Ground bolt terminal 203930 GROUND SUPT GL Ground wire support hooks 400183 FTA050CC 1/2 in. conduit fitting 400184 FTA075CC 3/4 in. conduit fitting 400185 FTA100CC 1 in. conduit fitting 400186 FTA125CC 1 1/4 in. conduit fitting 289418 DROP OUT 8 in. drop out fitting FLEXTRAY offers a wide variety of splice options that make your installation fast and economical. The FLEXMATE SYSTEM is the fastest and most cost-effective splice 290692 CABLE ROLLER Cable roller option available and is recommended for tray widths up to 12 in. wide. 171096 2" DIVIDER 2 in. H x 118 in. L divider FLEXMATE SYSTEM is UL and CSA Certified. 174349 ATTACHMENT CLIP Wall/hanger for 2 in. width 174350 SUPT WASHER Support washer ELECTROPLATED ZINC GALVANIZED 206657 ATTACHMTCLPBLE Attachment clip A wide variety of splice options enables you to connect FLEXTRAY quickly 248013 4 IN DIVIDER 4 in. H x 118 in. L divider and economically. 248029 12 IN COVER 12 in. W x 118 in. L cover Anixter No. Vendor No. Description 248046 16 IN COVER 16 in. W x 118 in. L cover 214856 WASHER SPL KIT Washer splice kit, top and bottom 248063 18 IN COVER 18 in. W x 118 in. L cover 213141 FLEXMATE2 Crimp splice clips 248064 2 IN COVER 2 in. W x 118 in. L cover 213144 FLEXMATE TOOL FLEXMATE crimping tool 248071 24 IN COVER 24 in. W x 118 in. L cover 390233 FTSTLCZN Tab-loc splice 248074 4 IN COVER 4 in. W x 118 in. L cover D 174365 SPLICE BAR Splice bar 248088 6 IN COVER 6 in. W x 118 in. L cover 290687 90 DEGREE KIT 90° splice bar and hardware 248094 INSERT 16X118 16 in. W x 118 in. L solid insert 426593 FTSWNZN Wing Splice tool-less splice 248095 INSERT 18X118 18 in. W x 118 in. L solid insert BLACK FLEX-E-COAT FINISH 248096 INSERT 2X118 2 in. W x 118 in. L solid insert Anixter No. Vendor No. Description 248097 INSERT 20X118 20 in. W x 118 in. L solid insert 221305 WASHERSPLKITBLE Washer splice kit, top and bottom 248098 INSERT 24X118 24 in. W x 118 in. L solid insert 213145 FLEXMATE2 BLE Crimp splice clips 248099 INSERT 4X118 4 in. W x 118 in. L solid insert 206627 SPLICE BAR BLE Splice bar 248100 INSERT 6X118 6 in. W x 118 in. L solid insert Runway, Cable;Wire Basket/2539 248101 INSERT 8X118 8 in. W x 118 in. L solid insert Index1.Support and Supplies//Physical Support Structure//Cable Runway 248860 RACK CLAMP BLE Clamp for equipment racks FLEXTRAY Accessories 289420 DROP OUT BLE 8 in. drop out fitting COOPER B-LINE PR12075V2-21922.eps 311890 6 IN DIVIDER 6 in. H x 118 in. L divider 311921 8 IN COVER 8 in. W x 118 in. L cover BLACK FLEX-E-COAT FINISH Anixter No. Vendor No. Description 206657 ATTACHMTCLPBLE Attachment clip 248860 RACK CLAMP BLE Clamp for equipment racks 289420 DROP OUT BLE 8 in. drop out fitting 221356 TOOLLESS CLIP Plastic hold down clip 206631 SUPT WASHER BLE Support washers FLEXTRAY offers a variety of accessories for your installation including inserts, dividers and covers for cable protection and the patented CLEANSHEAR. FEATURES • Solid bottom inserts • Covers • Ceiling anchors Request the latest literature and guides from Anixter. 4.126 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Wire Basket Cable Runway Cooper B-Line Runway, Cable;Wire Basket/13434 Index1.Support and Supplies//Physical Support Structure//Cable Runway • Stand legs are marked to indicate the height from the concrete floor to the top of the stand FLEXTRAY Under Floor Support Methods • Choose the tray length that works best for your installation - 2 ft., 4 ft., or 10 ft. COOPER B-LINE PR12071V2-21925.eps • Stands can support tray at distances greater than 2 ft., unlike other solutions on the market • Stands can be attached to the floor in one of three ways: adhesive pads, floor adhesive or bolts PRE-GALVANIZED ZINC TRAY Anixter No. Vendor No. Description 400242 FTU2X6X2 Tray section 2 ft. L x 6 in. W x 2 in. D 400243 FTU2X6X4 Tray section 4 ft. L x 6 in. W x 2 in. D 400244 FTU4X6X2 Tray section 2 ft. L x 6 in. W x 4 in. D 400245 FTU4X6X4 Tray section 4 ft. L x 6 in. W x 4 in. D Anixter No. Vendor No. Description 400246 FTU6X6X2 Tray section 2 ft. L x 6 in. W x 6 in. D 248858 PEDESTAL CLAMP Attachment clamp for raised floor support 400247 FTU6X6X4 Tray section 4 ft. L x 6 in. W x 6 in. D 248859 PEDESTAL KIT Clamp assembly kit for raised 400248 FTU2X12X2 Tray section 2 ft. L x 12 in. W x 2 in. D floor support 400249 FTU2X12X4 Tray section 4 ft. L x 12 in. W x 2 in. D 371428 WBU1203 Non-adjustable stand, 3 in. H x 12 in. W, 400250 FTU4X12X2 Tray section 2 ft. L x 12 in. W x 4 in. D requires hold down clips 400251 FTU4X12X4 Tray section 4 ft. L x 12 in. W x 4 in. D 371429 WBU1204 Non-adjustable stand, 4 in. H x 12 in. W, 400252 FTU6X12X2 Tray section 2 ft. L x 12 in. W x 6 in. D requires hold down clips 400253 FTU6X12X4 Tray section 4 ft. L x 12 in. W x 6 in. D 371431 WBU1206 Non-adjustable stand, 6 in. H x 12 in. W, 400254 FTU2X20X2 Tray section 2 ft. L x 20 in. W x 2 in. D requires hold down clips 400255 FTU2X20X4 Tray section 4 ft. L x 20 in. W x 2 in. D 371425 WBUHD Basket clip for WBU-type floor stands 400256 FTU4X20X2 Tray section 2 ft. L x 20 in. W x 4 in. D Runway, Cable;Wire Basket/15443 Index1.Support and Supplies//Physical Support Structure//Cable Runway 400257 FTU4X20X4 Tray section 4 ft. L x 20 in. W x 4 in. D F.A.S.T. System for Raised Floor Applications 400258 FTU6X20X2 Tray section 2 ft. L x 20 in. W x 6 in. D 400259 FTU6X20X4 Tray section 4 ft. L x 20 in. W x 6 in. D COOPER B-LINE PR22454V2-181364.eps 371458 WBUFLT Fitting flat 2 ft. L x 20 in. W x 24 in. D STANDS Anixter No. Vendor No. Description 371412 WBU1216 Stand kit for 12 in. W wire basket, height adjustable from 10 in. to 16 in. 371413 WBU1224 Stand kit for 12 in. W wire basket, height adjustable from 18 in. to 24 in. 371414 WBU1231 Stand kit for 12 in. W wire basket, height adjustable from 25 in. to 31 in. The F.A.S.T. System from Cooper B-Line is a foldable, adjustable, stackable, tool-less 371415 WBU2016 Stand kit for 20 in. W wire basket, height solution for raised floor applications. It is the only system on the market that can be adjustable from 10 in. to 16 in. installed independently of the raised floor and without tools! The system is designed 371416 WBU2024 Stand kit for 20 in. W wire basket, height to be simple to order, small to store and ship, and fast to install. The flexibility of the adjustable from 18 in. to 24 in. F.A.S.T. system makes it suitable for small jobs up to large data center installations. 371417 WBU2031 Stand kit for 20 in. W wire basket, height adjustable from 25 in. to 31 in. FEATURES 371428 WBU1203 Non-adjustable stand, 3 in. H x 12 in. W, • Best solution for data centers and deep floors - stands are available up to 31 in. requires hold down clips in height and three or more tiers of cable management can be created 371429 WBU1204 Non-adjustable stand, 4 in. H x 12 in. W, • Tool-less assembly of supports and connection of basket to supports requires hold down clips • Floor stands are independent of the raised floor, allowing the system to be installed before the raised floor 371430 WBU1205 Non-adjustable stand, 5 in. H x 12 in. W • Stands fold into small package for easy storage and shipping 371431 WBU1206 Non-adjustable stand, 6 in. H x 12 in. W, • Stand and cantilever heights are adjustable, allowing the tray to be positioned requires hold down clips directly underneath the access floor panels for easy cable access • Adding tiers is simple by ordering additional stands to stack or a cantilever kit • Cantilever tiers allow segregation of cables with access to all cables Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.127 Wire Basket Cable Runway Cooper B-Line CANTILEVER KITS AND COMPONENTS PR22452V2-133159.eps Anixter No. Vendor No. Description 371418 WBUCK12 Cantilever kit, single tier with 12 in. bracket 371419 WBUCK812 Cantilever kit, double tier with 8 in. and 12 in. brackets 371420 WBUCB8 8 in. cantilever bracket for 6 in. W basket 371421 WBUCB12 12 in. cantilever bracket for up to 12 in. W basket 371422 WBUL16 Short vertical support 371423 WBUL24 Medium vertical support 371424 WBUL31 Tall vertical support ACCESSORIES PR22455V2-132826.eps D Anixter No. Vendor No. Description 371425 WBUHD Basket clip for WBU-type floor stands 371426 WBUBPC Pedestal clip for F.A.S.T. system 371427 WBUCF Cantilever foot for F.A.S.T. system 371437 WBUF Foot for F.A.S.T. system stand 371438 WBUTAPE Tape for F.A.S.T. system stand 371439 WBUFA Floor adhesive for F.A.S.T. system Request the latest literature and guides from Anixter. 4.128 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway PANDUIT ./Raceway;Nonmetallic/3845 Index1.Support and Supplies//Physical Support Structure//Cable Runway COVER COUPLER Joins covers sections together. 10 per pack. PAN-WAY TG-70 Surface Raceway Anixter No. Vendor No. Description PANDUIT pr5402V2-15110.eps 190378 T70CCEI-X Electrical ivory 186700 T70CCIW-X Off white BACKFEED FITTING Features breakouts to enter through the bottom of the fitting. Anixter No. Vendor No. Description 268548 TGBFIW Off white 268549 TGBFEI Electric ivory BACKFEED FITTING INSERT Maintains bend radius control. PAN-WAY TG-70 Surface Raceway is an aesthetically designed, multichannel system Anixter No. Vendor No. Description that allows you to route copper, fiber optic, and/or power cables together in one 268551 TGBFI Gray raceway. Electrical and communications devices can be mounted inside the raceway to provide a clean, attractive solution with maximum security. END CAP FITTING Includes concentric breakouts for 1/2 in. and 1 in. conduit. FEATURES Anixter No. Vendor No. Description • UL and CSA rated to 600 V • Aesthetically pleasing design 249988 TGECEI Electrical ivory • All fittings maintain a minimum 40 mm cable bend radius per 230485 TGECIW Off white ANSI/TIA standards INSIDE CORNER FITTING • Large cable capacity Connects raceway at inside corners. • Accepts NEMA standard 70 mm faceplates Anixter No. Vendor No. Description • Pre-punched mounting holes 249995 TGICEI Electrical ivory • Tamper resistant 230478 TGICIW Off white TG-70 RACEWAY BASE AND COVER OUTSIDE CORNER FITTING Dimension: 5.32 in. x 2.68 in. Includes cover. Connects raceway at outside corners. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 249974 TG70EI8 Electrical ivory, 8 ft. 249997 TGOCEI Electrical ivory 230476 TG70IW8 Off white, 8 ft. 249996 TGOCIW Off white 249976 TG70EI10 Electrical ivory, 10 ft. 249975 TG70IW10 Off white, 10 ft. RIGHT-ANGLE FITTING Connects raceway flat injunctions at right angles. T-70 REPLACEMENT RACEWAY COVER Anixter No. Vendor No. Description Works with Type T-70/TG-70, and Twin-70 raceway. 249992 TGRAEI Electrical ivory Anixter No. Vendor No. Description 249989 TGRAIW Off white 203260 T70CEI8 Electrical ivory, 8 ft. 199902 T70CIW8 Off white, 8 ft. TEE DIVIDER INSERT 203261 T70CEI10 Electrical ivory, 10 ft. Mounts inside TGT Tee fitting to maintain channel separation. 203259 T70CIW10 Off white, 10 ft. Anixter No. Vendor No. Description DIVIDER WALL 250006 TGTD Gray Snaps onto rails in base to create separate channels. Must use wire retainers to TEE FITTING ensure channel separation per UL/CSA. Joins raceway at tee junctions. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 230486 TGDW8 Gray, 8 ft. 250001 TGTEI Electrical ivory 250003 TGDW10 Gray, 10 ft. 230481 TGTIW Off white BASE COUPLER DEVICE MOUNTING BRACKET Includes two base coupler halves for joining sections. 10 per pack. Mounts NEMA-standard electrical receptacles in raceway. 10 per pack. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 230483 TG70BCIW-X Off white 186715 T70DB-X Gray 249985 TG70BCEI-X Electrical ivory Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.129 Surface Raceway PANDUIT Tamper-resistant raceway cover for use with base. (continued) PAN-WAY T-70 Surface Raceway Anixter No. Vendor No. Description THREE-SIDED HANGING BOX 203260 T70CEI8 Electrical ivory, 8 ft. For use when running both power and communications cabling in the same raceway. 199902 T70CIW8 Off white, 8 ft. Separates power and communications cables when used with divider wall. 203261 T70CEI10 Electrical ivory, 10 ft. 10 per pack. 203259 T70CIW10 Off white, 10 ft. Anixter No. Vendor No. Description 230487 TG70HB3-X Gray DIVIDER WALL Snaps onto rails in raceway base to create separate channels. Must use wire WIRE RETAINERS retainers to ensure channel separation per UL/CSA. Holds wires in place. 10 per pack. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 199901 T70DW8 Gray, 8 ft. 250004 TG70WR-X Gray 204301 T70DW10 Gray, 10 ft. TG-70 GFCI THREE-SIDED HANGING BOX COVER COUPLER FITTING Accepts single-gang U.S. ground fault circuit interrupter (GFCI) standard electrical Joins two pieces of T-70 raceway covers together. 10 per pack. devices. Provides increased internal area for connections and excess wire. 10 per pack. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 190378 T70CCEI-X Electrical ivory 268555 TG70HB3GFCI-X Gray 186700 T70CCIW-X Off white Raceway;Nonmetallic/1767 BASE COUPLER FITTING Index1.Support and Supplies//Hardware and Supplies//Premise Applications Joins two pieces of T-70 raceway together. 10 per pack. PAN-WAY T-70 Surface Raceway Anixter No. Vendor No. Description PANDUIT PR0595V2-14926.eps 190377 T70BCEI-X Electrical ivory 186699 T70BCIW-X Off white RIGHT ANGLE FITTING D Connects flat injunctions at right angles. Anixter No. Vendor No. Description 190380 T70RAEI Electrical ivory 186672 T70RAIW Off white INSIDE CORNER FITTING PAN-WAY T-70 Surface Raceway is a multichannel system that allows you to route Connects raceway at inside corners. copper, fiber optic and/or power cabling in one raceway. Electrical and communications devices can be mounted inside the raceway to provide a clean, Anixter No. Vendor No. Description attractive solution with maximum security. 190379 T70ICEI Electrical ivory 186665 T70ICIW Off white FEATURES • UL and CSA rated to 600 V OUTSIDE CORNER FITTING • Aesthetically pleasing design Connects raceway at outside corners. • All fittings maintain a minimum 1 in. cable bend radius per ANSI/TIA standards Anixter No. Vendor No. Description • Accepts NEMA standard 70 mm faceplates 190381 T70OCEI Electrical ivory • Tamper resistant 186670 T70OCIW Off white • Pre-punched mounting holes • Transitions to T-45 and LD Profile Raceways TEE FITTINGS Joins sections of raceway at tee junctions. T-70 RACEWAY BASE Anixter No. Vendor No. Description 1.77 in. x 4.07 in. 190767 T70TEI Electrical ivory Anixter No. Vendor No. Description 186698 T70TIW Off white 203256 T70BEI8 Electrical ivory, 8 ft. 199884 T70BIW8 Off white, 8 ft. DIVIDER INSERTS 203257 T70BEI10 Electrical ivory, 10 ft. Separates power and data within tee fittings. Color is gray. 203254 T70BIW10 Off white, 10 ft. Anixter No. Vendor No. Description 310402 T70TD Tee fitting divider T-70 RACEWAY COVER Request the latest literature and guides from Anixter. 4.130 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway PANDUIT Raceway;Nonmetallic/1938 END CAP FITTING Index1.Support and Supplies//Hardware and Supplies//Premise Applications Includes concentric breakouts for 1/2 in. conduit. PAN-WAY Twin-70 Surface Raceway Anixter No. Vendor No. Description PANDUIT PR2110V2-143854.eps 190384 T70ECEI Electrical ivory 186568 T70ECIW Off white ENTRANCE END FITTING Knockouts for 1/2 in., 3/4 in., 1 in. and 1 1/4 in. conduit allow entry from ceiling or through wall. Anixter No. Vendor No. Description 190766 T70EEEI Electrical ivory 186765 T70EEIW Off white TRANSITION FITTING AND COVERS PAN-WAY Twin-70 Surface Raceway is a multichannel, aesthetically pleasing design Used to make a transition between PAN-WAY T-70 and T-45 raceway or T-70 to LD profile raceway. Breakouts located on base and cover for all sizes. Includes bend that utilizes two independent channels with covers to provide multichannel capacity radius insert. throughout the system. Anixter No. Vendor No. Description FEATURES 190382 T70TREI Electrical ivory • UL and CSA rated to 600 V 186763 T70TRIW Off white • All fittings maintain a minimum 1 in. bend radius per ANSI/TIA standards • Tamper resistant DEVICE MOUNTING BRACKET • Accepts NEMA standard 70 mm faceplates For use when running either all power or all communications cabling in the raceway. • Pre-punched mounting holes Used to quickly mount NEMA-standard electrical receptacles in raceway. 10 per pack. TWIN-70 RACEWAY BASE Anixter No. Vendor No. Description 1.77 in. x 7.23 in., 8 ft. lengths. 186715 T70DB-X Gray Anixter No. Vendor No. Description HANGING BOXES 203408 T702BEI8 Electrical ivory, 8 ft. For use when running both power and communications cabling in the same raceway. 201684 T702BIW8 Off white, 8 ft. Separates power and communications cables when used with divider wall. 203409 T702BEI10 Electrical ivory, 10 ft. 10 per pack. 203398 T702BIW10 Off white, 10 ft. Anixter No. Vendor No. Description T-70 RACEWAY COVER 186718 T70HB-X Hanging box Anixter No. Vendor No. Description 211107 T70HB3-X Three-sided hanging box 203260 T70CEI8 Electrical ivory, 8 ft. WIRE RETAINER 199902 T70CIW8 Off white, 8 ft. Holds wires in place and will not interfere with cover installation. 10 per pack. 203261 T70CEI10 Electrical ivory, 10 ft. Anixter No. Vendor No. Description 203259 T70CIW10 Off white, 10 ft. 186573 T70WR-X Gray T-70 RACEWAY DIVIDER WALL T-70 GFCI THREE-SIDED HANGING BOX Separates channels. Use with wire retainers to ensure channel separation Accepts single-gang U.S. ground fault circuit interrupter (GFCI) standard electrical per UL/CSA. devices. Provides increased internal area for connections and excess wire. Anixter No. Vendor No. Description 10 per pack. 199901 T70DW8 Gray, 8 ft. Anixter No. Vendor No. Description 204301 T70DW10 Gray, 10 ft. 268560 T70HB3GFCI-X Gray COVER COUPLER Joins two pieces of Twin-70 cover raceway together. 10 per pack. Anixter No. Vendor No. Description 190378 T70CCEI-X Electrical ivory 186700 T70CCIW-X Off white BASE COUPLER FITTING Joins two pieces of Twin-70 raceway together. 10 per pack. Anixter No. Vendor No. Description 203412 T702BCEI-X Electrical ivory 201689 T702BCIW-X Off white Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.131 Surface Raceway PANDUIT DEVICE MOUNTING BRACKET (continued) PAN-WAY Twin-70 Surface Raceway For use when running either all power or all communications cabling in the raceway. RIGHT ANGLE FITTING Used to quickly mount NEMA-standard electrical receptacles in raceway. 10 per pack. Used to connect raceway at 90° flat junctions. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 186715 T70DB-X Gray 203416 T702RAEI Electrical ivory 201692 T702RAIW Off white HANGING BOX For use when running both power and communications cabling in the same raceway. INSIDE CORNER FITTING Separates power and communications cable when used with divider wall. Used to connect raceway at inside-corner right angles. 10 per pack. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 203414 T702ICEI Electrical ivory 186718 T70HB-X Hanging box 201690 T702ICIW Off white 211107 T70HB3-X Three-sided hanging box OUTSIDE CORNER FITTING WIRE RETAINER Used to connect raceway at right-angle outside corners. Holds wires in place and will not interfere with cover installation. 10 per pack. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 203415 T702OCEI Electrical ivory 186573 T70WR-X Gray 201691 T702OCIW Off white Raceway;Nonmetallic/2500 Index1.Support and Supplies//Physical Support Structure//Accessories TEE FITTING PAN-WAY T-45 Raceway System Used to connect raceway at two right angles. PANDUIT pr5403V2-15113.eps Anixter No. Vendor No. Description 203419 T702TEI Electrical ivory 201697 T702TIW Off white END CAP FITTING Includes concentric breakouts for 1/2 in. conduit. D Anixter No. Vendor No. Description 203417 T702ECEI Electrical ivory 201696 T702ECIW Off white PAN-WAY T-45 Surface Raceway is a two-piece multichannel system used to route, ENTRANCE END FITTING protect and conceal data, voice, video, fiber optic and/or power cabling. The Knockouts for 1/2 in., 3/4 in., 1 in., 1 1/4 in. and 1 1/2 in. conduit allow entry from multi-directional hinged cover allows cable installation from either side. Hinged data ceiling or through wall. and power brackets provide easy access for terminating outlets. Anixter No. Vendor No. Description FEATURES 203418 T702EEEI Electrical ivory • UL and CSA rated to 600 V 201698 T702EEIW Off white • Fittings maintain 1 in. bend radius control • Tamper resistant TRANSITION FITTING • Capable of routing power and data cabling in a single raceway Used to make a transition between Twin-70 and T-70 raceway. • Prepunched mounting holes and optional factory-supplied adhesive backing Anixter No. Vendor No. Description T-45 RACEWAY BASE - 8 FOOT LENGTHS 203420 T702TREI Electrical ivory Supplied with prepunched mounting holes every 8 in. 201693 T702TRIW Off white Anixter No. Vendor No. Description TRANSITION FITTING 214820 T45BIW8 Off white Used to make a transition between Twin-70 and T-45 and LD profile raceway. 220103 T45BIW8-A Off white (adhesive back) Anixter No. Vendor No. Description 220095 T45BEI8 Electric ivory 203421 T702TRLEI Electrical ivory 220096 T45BEI8-A Electric ivory (adhesive back) 201694 T702TRLIW Off white T-45 RACEWAY BASE - 10 FOOT LENGTHS TRANSITION DIVIDER INSERT Supplied with prepunched mounting holes every 8 in. Maintains channel separation within T702TR or T702TRL. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 220101 T45BIW10 Off white 201695 T702TRI Gray 220102 T45BIW10-A Off white (adhesive back) 220093 T45BEI10 Electric ivory 220094 T45BEI10-A Electric ivory (adhesive back) Request the latest literature and guides from Anixter. 4.132 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway PANDUIT T-45 RACEWAY COVER - 8 FOOT LENGTHS T-45 END CAP FITTINGS Can be hinged open on either side of T-45 base. Used to terminate or allow entry to raceway. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 220112 T45CEI8 Electric ivory 220119 T45ECEI Electric ivory 214821 T45CIW8 Off white 214830 T45ECIW Off white T-45 RACEWAY COVER - 10 FOOT LENGTHS T-45 ENTRANCE END FITTINGS Can be hinged open on either side of T-45 base. Knockouts for 1/2 in., 3/4 in., 1 in., and 1 1/4 in. conduit to allow entry from ceiling or through-wall. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 220111 T45CEI10 Electric ivory 220122 T45EEEI Electric ivory 220115 T45CIW10 Off white 214829 T45EEIW Off white T-45 DIVIDER WALL T-45 REDUCER FITTINGS Snaps onto rails in raceway base to create separate channels. Must use with wire retainers to ensure channel separation per UL/CSA. Reduces from T-45 to LD10 profile raceway. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 214822 T45DW8 Gray, 8 ft. 220142 T45RLDEI Electric ivory 220118 T45DW10 Gray, 10 ft. 214834 T45RLDIW Off white T-45 COVER COUPLERS T-45 HINGED DATA BRACKETS Used to join two T-45 covers. 10 per pack. Snaps on, for mounting PAN-NET communications outlets vertically inline within raceway. Can be hinged open on either side of base. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 220108 T45CCEI-X Electric ivory 220125 T45HDBEI Electric ivory 214828 T45CCIW-X Off white 214832 T45HDBIW Off white T-45 RIGHT ANGLE FITTINGS T-45 ELECTRICAL BRACKET AND BOX - FOR DUPLEX ELECTRICAL OUTLETS Used to join sections at 90° flat junctions. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 268561 T45HEBIW Off white 220139 T45RAEI Electric ivory 268562 T45HEBEI Electric ivory 214825 T45RAIW Off white T-45 ELECTRICAL BRACKET AND BOX - FOR RECTANGULAR ELECTRICAL OUTLETS T-45 INSIDE CORNER FITTINGS Used to join raceway at inside corner. Anixter No. Vendor No. Description 268563 T45HEGBIW Off white Anixter No. Vendor No. Description 268564 T45HEGBEI Electric ivory 220130 T45ICEI Electric ivory 214823 T45ICIW Off white T-45 WIRE RETAINER Holds wires in place, will not interfere with cover installation. 10 per pack. T-45 OUTSIDE CORNER FITTINGS Anixter No. Vendor No. Description Used to join raceway at 90° outside corners. 214833 T45WR-X Gray Anixter No. Vendor No. Description 220136 T45OCEI Electric ivory T-45 WORKSTATION OUTLET CENTER 214824 T45OCIW Off white Two-piece box and bracket accepts any standard electrical or communications outlet with mounting hole widths of 3.28 in. (83.5 mm). Accepts any NEMA standard T-45 TEE FITTINGS 70 mm screw-on faceplate or PAN-WAY snap-on faceplate (power-rated). Creates an undivided "Tee" junction within T-45 section. Fitting includes base Anixter No. Vendor No. Description and cover. 220154 T45WCEI Electric ivory Anixter No. Vendor No. Description 214831 T45WCIW Off white 214826 T45TIW Off white 220147 T45TEI Electric ivory T-45 WORKSTATION OUTLET CENTER Two-piece box and bracket accepts any standard communications outlet. Accepts T-45 INSERT FOR TEE FITTING any PAN-WAY snap-on communications faceplate (data only). Separates power and data within the tee fitting. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 220150 T45WC2EI Electric ivory 214827 T45TD Gray 217207 T45WC2IW Off white Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.133 Surface Raceway PANDUIT Raceway;Nonmetallic/971 Index1.Support and Supplies//Hardware and Supplies//Premise Applications nonslip liner keeps the cover from sliding and prevents movement in a vertical orientation. It also provides exceptional strength during impact and cutting. Fittings PAN-WAY LD Profile Surface Raceway are available with a 1 in. bend radius for all copper and fiber optic applications and PANDUIT pr5399V2-15101.eps power-rated for all power applications. LDPH is available with mounting holes and adhesive backing which provides for easy installation on clean, smooth interior surfaces. SIZE 0.46 IN. X 0.77 IN. 8 ft. length (Change the "8" in the PANDUIT part number to a "6" or a "10" for 6 ft. or 10 ft. lengths.) Anixter No. Vendor No. Description 311835 LDPH3EI8-A Electric ivory PAN-WAY LD Profile Surface Raceway is an adhesive-backed, one-piece raceway that 311827 LDPH3IW8-A Off white installs quickly and easily. The superior one-piece, hinged-cover design holds cables SIZE 0.60 IN. X 1.00 IN. in place during installation, allowing cables to be laid in instead of pulled through 8 ft. length (Change the "8" in the PANDUIT part number to a "6" or a "10" for 6 ft. or the raceway. The integral hinge will not separate when the raceway is cut or 10 ft. lengths.) impacted. Standard fittings are available for low-voltage cabling. Bend radius fittings Anixter No. Vendor No. Description incorporate a minimum 1 in. bend radius, which makes them ideal for use in high-performance copper and fiber optic applications. 311828 LDPH5EI8-A Electric ivory 311832 LDPH5IW8-A Off white SIZE 0.46 IN. X 0.77 IN. SIZE 0.86 IN. X 1.51 IN. Anixter No. Vendor No. Description 8 ft. length (Change the "8" in the PANDUIT part number to a "6" or a "10" for 6 ft. or 106744 LD3EI6-A Electrical ivory, 6 ft. 10 ft. lengths.) 131157 LD3IW6-A Off white, 6 ft. Anixter No. Vendor No. Description 197656 LD3EI8-A Electric ivory, 8 ft. 311831 LDPH10EI8-A Electric ivory 200251 LD3IW8-A Off white, 8 ft. 311829 LDPH10IW8-A Off white SIZE 0.60 IN. X 1.01 IN. D Raceway;Metallic/14573 Index1.Support and Supplies//Physical Support Structure//Cable Runway Anixter No. Vendor No. Description PAN-WAY PMR5/PMR7 Metal Raceway and Accessories 106756 LD5EI6-A Electrical ivory, 6 ft. 131156 LD5IW6-A Off white, 6 ft. PANDUIT PR20043V2-67699.eps 197586 LD5EI8-A Electrical ivory, 8 ft. 187594 LD5IW8-A Off white, 8 ft. SIZE 0.94 IN. X 1.51 IN. Anixter No. Vendor No. Description 106768 LD10EI6-A Electrical ivory, 6 ft. 131155 LD10IW6-A Off white, 6 ft. 203091 LD10EI8-A Electrical ivory, 8 ft. 203227 LD10IW8-A Off white, 8 ft. Raceway;Nonmetallic/973 Index1.Support and Supplies//Hardware and Supplies//Premise Applications PMR5/PMR7 Metal Raceway is a single-channel raceway used for routing, protecting, PAN-WAY LDPH Surface Raceway concealing and terminating power wire and high-performance copper, voice, video or fiber optic cable. The PMR5/PMR7 Metal Raceway system includes a complete PANDUIT PR12109V2-22020.eps assortment of fittings, metal boxes and metal faceplates and is available in two colors, white (WH) and almond (AL), to match any décor. FEATURES • UL Listed and rated to 600 V; meets UL 5 and CSA 22.2 No. 62-93 safety standards • Patent-pending bonding method provides full continuity of ground path between fittings and channel for increased safety • One-piece channel construction eliminates the problem of channel separation, PAN-WAY LDPH Surface Raceway is UL and CSA rated to 600 V and can be used for saving installation time routing data, voice, video, fiber optic and/or power cabling. It is tamper-resistant, • System components incorporate a unique snap-mount assembly method for making it ideal for school and university applications. Preassembled and faster installation power-rated, this raceway includes an innovative two-piece hinged cover design, • Fittings and mounts can be attached using various types and sizes of fasteners which can be positioned open at any angle without the use of tools or fixtures. The Request the latest literature and guides from Anixter. 4.134 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway PANDUIT PMR5 METAL RACEWAY ENTRANCE END FITTINGS Anixter No. Vendor No. Description Anixter No. Vendor No. Description 351861 PMR5WH5 White, 5 ft. 351893 PMR57EEWH White 351862 PMR5AL5 Almond, 5 ft. 351894 PMR57EEAL Almond PMR7 METAL RACEWAY METAL BOXES Anixter No. Vendor No. Description Anixter No. Vendor No. Description 351863 PMR7WH5 White, 5 ft. 351895 PMR5747WH (4.9 in. L x 3.3 in. W x 1.4 in. H), white 351864 PMR7AL5 Almond, 5 ft. 351896 PMR5747AL (4.9 in. L x 3.3 in. W x 1.4 in. H), almond 351897 PMR5747-2WH (4.9 in. L x 4.9 in. W x 1.4 in. H), white SUPPORTING CLIP 351919 PMR5747-2AL (4.9 in. L x 4.9 in. W x 1.4 in. H), almond 10 per pack 351920 PMR5744SWHL (4.9 in. L x 3.3 in. W x 2.3 in. H), white Anixter No. Vendor No. Description 351921 PMR5744SAL (4.9 in. L x 3.3 in. W x 2.3 in. H), almond 351865 PMR57SC-X Gray 351922 PMR5744S-2WH (4.9 in. L x 4.9 in. W x 2.3 in. H), white MOUNTING STRAPS 351923 PMR5744S-2AL (4.9 in. L x 4.9 in. W x 2.3 in. H), almond 10 per pack 351924 PMR5744WH (4.9 in. L x 3.3 in. W x 2.8 in. H), white Anixter No. Vendor No. Description 351925 PMR5744AL (4.9 in. L x 3.3 in. W x 2.8 in. H), almond 351867 PMR5MSWH-X White, for use with PMR5 raceway 351926 PMR5744-2WH (4.9 in. L x 4.9 in. W x 2.8 in. H), white 351868 PMR5MSAL-X Almond, for use with PMR5 raceway 351928 PMR5744-2AL (4.9 in. L x 4.9 in. W x 2.8 in. H), almond 351870 PMR7MSWH-X White, for use with PMR7 raceway 351929 PMR5738AWH (Dia. = 5.5 in. D x 1.0 in. H), white 351871 PMR7MSAL-X Almond, for use with PMR7 raceway 351930 PMR5738AAL (Dia. = 5.5 in. D x 1.0 in. H), almond COUPLER FITTINGS METAL FACEPLATES 10 per pack Anixter No. Vendor No. Description Anixter No. Vendor No. Description 351931 MP1GBWH Metal single-gang blank faceplate, white 351872 PMR5CCWH-X White, for use with PMR5 raceway 351932 MP1GBAL Metal single-gang blank 351873 PMR5CCAL-X Almond, for use with PMR5 raceway faceplate, almond 351874 PMR7CCWH-X White, for use with PMR7 raceway 351933 MP1TSWH Metal single-gang toggle switch 351875 PMR7CCAL-X Almond, for use with PMR7 raceway faceplate, white 351934 MP1TSAL Metal single-gang toggle switch RIGHT ANGLE FITTINGS faceplate, almond Anixter No. Vendor No. Description 351935 MP1G106WH Metal single-gang 106 duplex 351876 PMR5RAWH White, for use with PMR5 raceway faceplate, white 351877 PMR5RAAL Almond, for use with PMR5 raceway 351936 MP1G106AL Metal single-gang 106 duplex 351878 PMR7RAWH White, for use with PMR7 raceway faceplate, almond 351879 PMR7RAAL Almond, for use with PMR7 raceway 351937 MP1GRWH Metal single-gang rectangular faceplate, white INSIDE CORNER FITTINGS 351938 MP1GRAL Metal single-gang rectangular Anixter No. Vendor No. Description faceplate, almond 351880 PMR5ICWH White, for use with PMR5 raceway 351939 MP2GBWH Metal double-gang blank faceplate, white 351881 PMR5ICAL Almond, for use with PMR5 raceway 351940 MP2GBAL Metal double-gang blank 351882 PMR7ICWH White, for use with PMR7 raceway faceplate, almond 351883 PMR7ICAL Almond, for use with PMR7 raceway 351941 MP2TSWH Metal double-gang toggle switch OUTSIDE CORNER FITTINGS faceplate, white 351942 MP2TSAL Metal double-gang toggle switch Anixter No. Vendor No. Description faceplate, almond 351884 PMR5OCWH White, for use with PMR5 raceway 351943 MP2G106WH Metal double-gang 106 duplex 351885 PMR5OCAL Almond, for use with PMR5 raceway faceplate, white 351886 PMR7OCWH White, for use with PMR7 raceway 351945 MP2G106AL Metal double-gang 106 duplex 351887 PMR7OCAL Almond, for use with PMR7 raceway faceplate, almond TEE FITTINGS 351946 MP2GRWH Metal double-gang rectangular Anixter No. Vendor No. Description faceplate, white 351888 PMR57TWH White 351947 MP2GRAL Metal double-gang rectangular 351889 PMR57TAL Almond faceplate, almond Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.135 Surface Raceway PANDUIT Raceway;Metallic/15322 Index1.Support and Supplies//Physical Support Structure//Raceway PMR40 RACEWAY PRE-CUT COVER 19.75 IN. To be used with PMR40 raceway for mounting devices on 24 in. centers. PAN-WAY PMR40 Metal Surface Raceway Anixter No. Vendor No. Description PANDUIT PR22273V2-129728.eps 372798 PMR40CWH19.75 White 372800 PMR40CAL19.75 Almond PMR40 RACEWAY PRE-CUT COVER 31.75 IN. To be used with PMR40 raceway for mounting devices on 36 in. centers. Anixter No. Vendor No. Description 372802 PMR40CWH31.75 White 372803 PMR40CAL31.75 Almond DIVIDER WALL Snaps into PMR40DC-X to create separate channels. Must use wire retainers to PAN-WAY PMR40 Metal Surface Raceway is a multichannel system that routes copper, ensure channel separation per UL/CSA. fiber optic, and/or power cabling in one raceway. PMR40 raceway offers an offset Anixter No. Vendor No. Description snap-on faceplate and divider wall design that locates data terminations outside the 372805 PMR40DW5 Gray, 5 ft. data channel for increased data cable capacity. This multichannel, fully compliant ANSI/TIA-568-B and 569-B solution maintains a 2 in. bend radius throughout the DIVIDER WALL CLIP system for routing high-performance 10 Gigabit copper and fiber cable, accepts Required for supporting PMR40DW. 30 in. spacing recommended between clips. 10 per pack. NEMA standard double-gang faceplates for increased termination options, and fitting covers overlap raceway covers for a finished appearance. Anixter No. Vendor No. Description 372809 PMR40DC-X Gray FEATURES • UL and CSA rated to 600 V BASE COUPLER FITTING • Supports high-performance 10 Gigabit copper and fiber cable Joins sections of PMR40 raceway base. • Increased data cable capacity with the offset snap-on faceplate and divider Anixter No. Vendor No. Description wall design 369279 PMR40BC Gray D • Accepts NEMA standard for increased termination options • Tamper resistant RIGHT ANGLE FITTING • Pre-punched mounting holes Connects raceway at right angles. Anixter No. Vendor No. Description PMR40 RACEWAY BASE 372817 PMR40RAWH White 5.04 in. x 1.61 in. 372818 PMR40RAAL Almond Anixter No. Vendor No. Description 369282 PMR40BWH10 White, 10 ft. INSIDE CORNER FITTING WITHOUT BEND RADIUS CONTROL 369278 PMR40BAL10 Almond, 10 ft. Connects raceway at inside corners. Anixter No. Vendor No. Description PMR40 RACEWAY COVER 372819 PMR40SIC Gray Tamper-resistant raceway cover for use with base. Anixter No. Vendor No. Description INSIDE CORNER FITTING 372785 PMR40CWH5 White, 5 ft. Connects raceway at inside corners. 372786 PMR40CAL5 Almond, 5 ft. Anixter No. Vendor No. Description 372820 PMR40ICWH White PMR40 RACEWAY PRE-CUT COVER 7.75 IN. 372821 PMR40ICAL Almond To be used with PMR40 raceway for mounting devices on 12 in. centers. Anixter No. Vendor No. Description INTERNAL 45 DEGREE ELBOW FITTING 372787 PMR40CWH7.75 White Connects raceway at 45 degree inside corners. 372790 PMR40CAL7.75 Almond Anixter No. Vendor No. Description 372822 PMR40I45EWH White PMR40 RACEWAY PRE-CUT COVER 13.75 IN. 372823 PMR40I45EAL Almond To be used with PMR40 raceway for mounting devices on 18 in. centers. Anixter No. Vendor No. Description OUTSIDE CORNER FITTING WITHOUT BEND RADIUS CONTROL 372792 PMR40CWH13.75 White Connects raceway at outside corners. 372795 PMR40CAL13.75 Almond Anixter No. Vendor No. Description 372824 PMR40SOCWH White 372825 PMR40SOCAL Almond Request the latest literature and guides from Anixter. 4.136 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway PANDUIT OUTSIDE CORNER FITTING DEVICE MOUNTING BRACKET FOR 50/50 SPLIT Connects raceway at outside corners. Used to mount NEMA standard single-gang electrical outlets and communications devices with either screw-on or snap-on single-gang faceplates. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 372826 PMR40SOCWH White 369281 PMR40BFWH White 372827 PMR40OCAL Almond 369280 PMR40BFAL Almond EXTERNAL 45 DEGREE ELBOW FITTING DATA PLATE Connects raceway at 45 degree outside corners. For mounting data faceplates PMR40FH2, PMR40FH4, PMR40KH2 and Anixter No. Vendor No. Description PMR40KH4 when a 50/50 split channel is used in the PMR40 base. Includes data 372828 PMR40E45EWH White plate, 2.50 in. pre-cut cover and offset divider wall. 372830 PMR40E45EAL Almond Anixter No. Vendor No. Description 372846 PMR40DP50WH White TEE FITTING Connects raceway at tee intersections. 372847 PMR40DP50AL Almond Anixter No. Vendor No. Description PMR40 DATA FACEPLATE, 2-PORT, MINI-COM 372831 PMR40TWH White Snap-on horizontal sloped communications faceplate accepts two PANDUIT 372833 PMR40TAL Almond MINI-COM modules. Anixter No. Vendor No. Description TEE DIVIDER INSERT 372848 PMR40FH2WH White Maintains a 50/50 channel separation for power and data applications. 372849 PMR40FH2AL Almond Anixter No. Vendor No. Description 372834 PMR40TD50 Gray PMR40 DATA FACEPLATE, 4-PORT, MINI-COM Snap-on horizontal sloped communications faceplate accepts four PANDUIT END CAP FITTING MINI-COM modules. Used to terminate or allow entry into PMR40 Raceway. Breakouts for Anixter No. Vendor No. Description 0.50 in. conduit. 372850 PMR40FH4WH White Anixter No. Vendor No. Description 372851 PMR40FH4AL Almond 372835 PMR40ECWH White 372836 PMR40ECAL Almond PMR40 DATA FACEPLATE, 2-PORT, KEYSTONE Snap-on horizontal sloped communications faceplate accepts two ENTRANCE END FITTING Keystone modules. Allows entry from ceiling or wall. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 372852 PMR40KH2WH White 372837 PMR40EEWH White 372853 PMR40KH2AL Almond 372838 PMR40EEAL Almond PMR40 DATA FACEPLATE, 4-PORT, KEYSTONE BACKFEED FITTING Snap-on horizontal sloped communications faceplate accepts four Allows cable entry through the back of the PMR40 raceway. Keystone modules. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 369281 PMR40BFWH White 372854 PMR40KH4WH White 369280 PMR40BFAL Almond 372855 PMR40KH4AL Almond PANEL CONNECTOR To connect PMR40 raceway with surface type panel boxes. Anixter No. Vendor No. Description 372842 PMR40PCWH White 372843 PMR40PCAL Almond INTERNAL CORNER COUPLING Anixter No. Vendor No. Description 372844 PMR40ICC Gray WIRE RETAINER Used to hold wire in place during installation. Package of 10. Anixter No. Vendor No. Description 372845 PMR40WR-X Gray Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.137 Surface Raceway PANDUIT Raceway;Fittings/252 Index1.Support and Supplies//Hardware and Supplies//Premise Applications TEE Standard Fittings for LD Profile Raceway Anixter No. Vendor No. Description Color 143476 TF3EI-E For use with the LD3 raceway Electrical ivory PANDUIT PR22276V2-129751.eps 142137 TF3IW-E For use with the LD3 raceway Off white 108701 TF5EI-E For use with the LD5 raceway Electrical ivory 142138 TF5IW-E For use with the LD5 raceway Off white 108702 TF10EI-X For use with the LD10 raceway Electrical ivory 142140 TF10IW-X For use with the LD10 raceway Off white END CAP Anixter No. Vendor No. Description Color 106747 ECF3EI-E For use with the LD3 raceway Electrical ivory 131152 ECF3IW-E For use with the LD3 raceway Off white Standard fittings to be used with LD raceway for low-voltage applications that do not 106759 ECF5EI-E For use with the LD5 raceway Electrical ivory require cable bend radius control. 131140 ECF5IW-E For use with the LD5 raceway Off white 106771 ECF10EI-X For use with the LD10 raceway Electrical ivory COUPLER 131132 ECF10IW-X For use with the LD10 raceway Off white Anixter No. Vendor No. Description Color 106746 CF3EI-E For use with the LD3 raceway Electrical ivory DROP CEILING/ENTRANCE END 131154 CF3IW-E For use with the LD3 raceway Off white Anixter No. Vendor No. Description Color 106758 CF5EI-E For use with the LD5 raceway Electrical ivory 126375 DCF3EI-X For use with the LD3 raceway Electrical ivory 131145 CF5IW-E For use with the LD5 raceway Off white 131153 DCF3IW-X For use with the LD3 raceway Off white 106770 CF10EI-X For use with the LD10 raceway Electrical ivory 126379 DCF5EI-X For use with the LD5 raceway Electrical ivory 131136 CF10IW-X For use with the LD10 raceway Off white 131144 DCF5IW-X For use with the LD5 raceway Off white 126377 DCF10EI-X For use with the LD10 raceway Electrical ivory RIGHT ANGLE 131135 DCF10IW-X For use with the LD10 raceway Off white Anixter No. Vendor No. Description Color D 106750 RAF3EI-E For use with the LD3 raceway Electrical ivory REDUCER 131147 RAF3IW-E For use with the LD3 raceway Off white Anixter No. Vendor No. Description Color 106762 RAF5EI-E For use with the LD5 raceway Electrical ivory 155596 RF5X3EI-E Reducer fitting for LD raceway Electrical ivory 131138 RAF5IW-E For use with the LD5 raceway Off white from size 5 to size 3. For use with 106774 RAF10EI-X For use with the LD10 raceway Electrical ivory LD5 and LD3 raceway 131126 RAF10IW-X For use with the LD10 raceway Off white 142139 RF5X3IW-E Reducer fitting for LD raceway Off white from size 5 to size 3. For use with INSIDE CORNER LD5 and LD3 raceway Anixter No. Vendor No. Description Color 108704 RF10X5EI-X Reducer fitting for LD raceway Electrical ivory 106748 ICF3EI-E For use with the LD3 raceway Electrical ivory from size 10 to size 5. For use 131158 ICF3IW-E For use with the LD3 raceway Off white with LD5 and LD10 raceway 106760 ICF5EI-E For use with the LD5 raceway Electrical ivory 142142 RF10X5IW-X Reducer fitting for LD raceway Off white 131142 ICF5IW-E For use with the LD5 raceway Off white from size 10 to size 5. For use 106772 ICF10EI-X For use with the LD10 raceway Electrical ivory with LD5 and LD10 raceway 131130 ICF10IW-X For use with the LD10 raceway Off white 155594 RF10X3EI-X Reducer fitting for LD raceway Electrical ivory from size 10 to size 3. For use OUTSIDE CORNER with LD3 and LD10 raceway Anixter No. Vendor No. Description Color 142141 RF10X3IW-X Reducer fitting for LD raceway Off white 106749 OCF3EI-E For use with the LD3 raceway Electrical ivory from size 10 to size 3. For use 131149 OCF3IW-E For use with the LD3 raceway Off white with LD3 and LD10 raceway 106761 OCF5EI-E For use with the LD5 raceway Electrical ivory 131137 OCF5IW-E For use with the LD5 raceway Off white 106773 OCF10EI-X For use with the LD10 raceway Electrical ivory 131128 OCF10IW-X For use with the LD10 raceway Off white Request the latest literature and guides from Anixter. 4.138 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway PANDUIT Raceway;Nonmetallic/1954 Index1.Support and Supplies//Hardware and Supplies//Premise Applications Anixter No. Vendor No. Description PAN-WAY Type LD2P10 Multichannel Surface Raceway 170148 CFX5EI-X 5, electrical ivory 170149 CFX5IW-X 5, off white PANDUIT PR2230V2-143856.eps 170147 CFX10EI-X 10, electrical ivory 170165 CFX10IW-X 10, off white RIGHT ANGLE FITTING For use with LD and LDPH Raceway. 10 per pack. Anixter No. Vendor No. Description 166069 RAFC3EI-X 3, electrical ivory 166071 RAFC3IW-X 3, off white 165405 RAFC5EI-X 5, electrical ivory 165404 RAFC5IW-X 5, off white PAN-WAY LD2P10 Multichannel Surface Raceway is a two-channel tamper-resistant 165399 RAFC10EI-X 10, electrical ivory raceway designed to route, protect and conceal data, voice, video, fiber optic and 165400 RAFC10IW-X 10, off white power cabling. Fittings incorporate a minimum 1 in. bend radius, which makes them INSIDE CORNER FITTING ideal for use in high-performance copper and fiber optic applications. Available in For use with LD and LDPH Raceway. 10 per pack. 8 ft. and 10 ft. lengths. Latching duct, .86 in. x 1.51 in. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 166184 ICFC3EI-X 3, electrical ivory 203434 LD2P10EI8-A 8 ft. lengths, electrical ivory 166182 ICFC3IW-X 3, off white 199806 LD2P10IW8-A 8 ft. lengths, off white 165419 ICFC5EI-X 5, electrical ivory 203435 LD2P10EI10-A 10 ft. lengths, electrical ivory 165421 ICFC5IW-X 5, off white 203325 LD2P10IW10-A 10 ft. lengths, off white 165415 ICFC10EI-X 10, electrical ivory Raceway;Fittings/1378 Index1.Support and Supplies//Hardware and Supplies//Premise Applications 165416 ICFC10IW-X 10, off white ANSI/TIA-compliant Fittings for LD Profile Raceway OUTSIDE CORNER FITTING PANDUIT PR0225V2-143848.eps For use with LDPH Raceway. 10 per pack. Anixter No. Vendor No. Description 166063 OCFX3EI-X 3, electrical ivory 166066 OCFX3IW-X 3, off white 165429 OCFX5EI-X 5, electrical ivory 165431 OCFX5IW-X 5, off white 165424 OCFX10EI-X 10, electrical ivory 165426 OCFX10IW-X 10, off white TEE FITTING These ANSI/TIA-compliant fittings are designed to ensure that cables routed through For use with LD and LDPH Raceway. 10 per pack. raceway do not exceed their recommended minimum 1 in. bend radius requirements. They can also be used for fiber and other low-voltage applications. The fittings are Anixter No. Vendor No. Description part of the complete PANDUIT system solution to help you maintain high-performance 166085 TFC3EI-X 3, electrical ivory copper and fiber optic cabling systems. 166079 TFC3IW-X 3, off white NOTE: 165450 TFC5EI-X 5, electrical ivory "3" in the description refers to use with LD3 and LDPH3 raceway, unless otherwise 165447 TFC5IW-X 5, off white noted. 165434 TFC10EI-X 10, electrical ivory "5" in the description refers to use with LD5 and LDPH5 raceway, unless otherwise 165437 TFC10IW-X 10, off white noted. 4-WAY CROSS FITTINGS "10" in the description refers to use with LD10 and LDPH10 raceway, unless For use with LD5 and LDPH5 Raceway ONLY. 10 per pack. otherwise noted. Anixter No. Vendor No. Description COUPLER FITTING 239627 CRFC5EI-X 5, electrical ivory For use with LD and LDPH Raceway. 10 per pack. 239626 CRFC5IW-X 5, off white Anixter No. Vendor No. Description 170163 CFX3EI-X 3, electrical ivory 170155 CFX3IW-X 3, off white Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.139 Surface Raceway PANDUIT Raceway;Outlet Boxes/972 Index1.Support and Supplies//Hardware and Supplies//Premise Applications (continued) ANSI/TIA-compliant Fittings for LD Profile Raceway PAN-WAY Surface-mount Outlet Boxes END CAP FITTING PANDUIT pr5401V2-15107.eps For use with LDPH Raceway. 10 per pack. Anixter No. Vendor No. Description 170145 ECFX3EI-X 3, electrical ivory 170153 ECFX3IW-X 3, off white 170157 ECFX5EI-X 5, electrical ivory 170161 ECFX5IW-X 5, off white 170297 ECFX10EI-X 10, electrical ivory PAN-WAY surface-mount outlet boxes are available for both power and 170294 ECFX10IW-X 10, off white communications applications. They are designed for use with PAN-WAY T-45 and LD Profile Raceways. Boxes are available in a variety of styles and can be mounted with DROP CEILING/ENTRANCE END FITTING screws (user-supplied) or optional adhesive tape. Includes junction box, base For use with LD3, LDPH3, LD5, LDPH5, LD10, LDPH10 raceways. CA3 or CA5 adapters are needed for LD3 and LD5 profile raceway. 10 per pack. and cover. Anixter No. Vendor No. Description LOW-VOLTAGE SINGLE-GANG WITH ADHESIVE-BACKED BASE, TWO-PIECE DESIGN 187907 DCEFXEI-X Electrical ivory Size: 5.02 in. L x 3.27 in. W x 1.62 in. D 187777 DCEFXIW-X Off white Anixter No. Vendor No. Color 151952 JBX3510EI-A Electrical ivory RIGHT ANGLE/ENTRANCE END FITTING 149891 JBX3510IW-A Off white For use with LD3, LDPH3, LD5, LDPH5, LD10, LDPH10 raceways. CA3 or CA5 adapters are needed for LD3 and LD5 profile raceway. 10 per pack. POWER-RATED SINGLE-GANG SCREW-MOUNT Anixter No. Vendor No. Description Size: 5.05 in. L x 3.31 in. W x 1.75 in. D 165444 RAEFXEI-X Electrical ivory Anixter No. Vendor No. Color 165442 RAEFXIW-X Off white 197856 JBP1EI Electrical ivory RACEWAY ADAPTERS 191555 JBP1IW Off white D Snaps into fitting cover to fit raceway. For use with types LD3, LDPH3, LD5, and POWER-RATED DOUBLE-GANG SCREW-MOUNT LDPH5 raceways. 10 per pack. Size: 5.05 in. L x 5.05 in. W x 1.62 in. D Anixter No. Vendor No. Description Anixter No. Vendor No. Color 125263 CA3EI-X 3, electrical ivory 194347 JBP2EI Electrical ivory 147205 CA3IW-X 3, off white 197841 JBP2IW Off white 125264 CA5EI-X 5, electrical ivory 147206 CA5IW-X 5, off white POWER-RATED SINGLE-GANG SCREW-MOUNT "DEEP" STYLE Size: 5.05 in. L x 3.31 in. W x 2.75 in. D 4-WAY CROSS FITTINGS FOR POWER RATED 600 V ONLY Anixter No. Vendor No. Color For use with LD5 and LDPH5 Raceway ONLY. 10 per pack. 203871 JBP1DEI Electrical ivory Anixter No. Vendor No. Description 201336 JBP1DIW Off white 239631 CRFX5EI-X 5, electrical ivory 239630 CRFX5IW-X 5, off white POWER-RATED DUAL-GANG SCREW-MOUNT "DEEP" STYLE Size: 5.19 in. L x 5.19 in. W x 2.75 in. D Anixter No. Vendor No. Color 203870 JBP2DEI Electrical ivory 203852 JBP2DIW Off white SINGLE-GANG FAST SNAP JUNCTION BOX Size: 5.00 in. L x 3.26 in. W x 1.62 in. H Anixter No. Vendor No. Color 425037 JBP1FSEI Electrical ivory 425040 JBP1FSIW Off white Request the latest literature and guides from Anixter. 4.140 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway PANDUIT Raceway;Office Furniture/10506 Index1.Support and Supplies//Physical Support Structure//Raceway VERTICAL RACEWAY Used to connect PAN-WAY office furniture raceway (OFR20**6) to desk-mount box PAN-WAY Office Furniture Raceway (OFR20DMB** ) and must be used with spill-over fittings (OFR20SO**.) PANDUIT PR11253V2-18372.eps Anixter No. Vendor No. Description 268324 OFVR5OB6 Office beige, 6 ft. 268325 OFVR5OS6 Office slate, 6 ft. 268326 OFVR5OG6 Office gray, 6 ft. 314418 OFVR5MT6 Medium tone, 6 ft. COMMUNICATIONS POLE Allows for data cable entry into office furniture raceway from suspended ceiling. Anixter No. Vendor No. Description 268327 OFR20CPOB8 Office beige, 8 ft. 268328 OFR20CPOS8 Office slate, 8 ft. PAN-WAY office furniture raceway is a one-piece single-channel low-voltage system 268329 OFR20CPOG8 Office gray, 8 ft. designed to route data cabling along the top of office furniture partitions. Robust 314419 OFR20CPMT8 Medium tone, 8 ft. design includes a one-piece hinge and tamper-resistant closure, which increases product stability and reduces inadvertent or unauthorized access to data cabling. FOUR-CUBICLE DROP FITTING PAN-WAY office furniture raceway is designed for desktop terminations, which utilize Allows the transition from office furniture raceway run horizontally along partition the typically unused area of the cubicle. wall to corner raceway mounted vertically in four cubicles. FEATURES Anixter No. Vendor No. Description • UL Listed in accordance with UL 5C requirements for Class 2 Communication 268330 OFR20OFCR70OB4 Office beige Cable Management Systems 268331 OFR20OFCR70OS4 Office slate • Tamper-resistant 268332 OFR20OFCR70OG4 Office gray • Maintains bend radius control throughout entire system as required by ANSI/TIA 314421 OFR20OFCR70MT4 Medium tone 568-B and 569-A • System is intended for furniture panels from 1.88 in. to 2.30 in. width TWO-CUBICLE DROP FITTING • Product supplied with adhesive backing for fast and easy installation Allows the transition from office furniture raceway run horizontally along partition wall to corner raceway mounted vertically in two cubicles. OFFICE FURNITURE RACEWAY Anixter No. Vendor No. Description Dimensions: 1.88 in. W x 1.71 in. H 268333 OFR20OFCR70OB2 Office beige Anixter No. Vendor No. Description 268334 OFR20OFCR70OS2 Office slate 268315 OFR20OB6 Office beige, 6 ft. 268335 OFR20OFCR70OG2 Office gray 268316 OFR20OS6 Office slate, 6 ft. 314437 OFR20OFCR70MT2P Medium tone 268317 OFR20OG6 Office gray, 6 ft. ONE-CUBICLE DROP FITTING 314415 OFR20MT6 Medium tone, 6 ft. Allows the transition from office furniture raceway run horizontally along partition CORNER RACEWAY BASE wall to corner raceway mounted vertically in one cubicle. Used to terminate low-voltage data cabling in the corner at the intersection of Anixter No. Vendor No. Description modular office furniture partitions. 268336 OFR20OFCR70OB1 Office beige Anixter No. Vendor No. Description 268337 OFR20OFCR70OS1 Office slate 268318 OFCR70OB6 Office beige, 6 ft. 268338 OFR20OFCR70OG1 Office gray 268319 OFCR70OS6 Office slate, 6 ft. 314428 OFR20OFCR70MT1 Medium tone 268320 OFCR70OG6 Office gray, 6 ft. FOUR-CUBICLE DROP BYPASS FITTING 314416 OFCR70MT6 Medium tone, 6 ft. Allows the transition from office furniture raceway run horizontally along partition CORNER RACEWAY COVER wall, around existing furniture pole, to office furniture corner raceway mounted vertically in four cubicles at the intersection of partitions. Anixter No. Vendor No. Description 268321 OFCRC70OB6 Office beige, 6 ft. Anixter No. Vendor No. Description 268322 OFCRC70OS6 Office slate, 6 ft. 314430 OFR20OFCR70OB4P Office beige 268323 OFCRC70OG6 Office gray, 6 ft. 314431 OFR20OFCR70OS4P Office slate 314417 OFCRC70MT6 Medium tone, 6 ft. 314432 OFR20OFCR70OG4P Office gray 314433 OFR20OFCR70MT4P Medium tone Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.141 Surface Raceway PANDUIT (continued) PAN-WAY Office Furniture Raceway Anixter No. Vendor No. Description 268347 OFR20DMBOG Office gray TWO-CUBICLE DROP BYPASS FITTING 314448 OFR20DMBMT Medium tone Allows the transition from office furniture raceway run horizontally along partition wall, around existing furniture pole, to office furniture corner raceway mounted MID-PANEL TEE FITTING vertically in two cubicles at the intersection of partitions. Used to connect communications pole to office furniture raceway run horizontally Anixter No. Vendor No. Description along partition wall. NOTE: Not intended for use at intersection of furniture panels. 314435 OFR20OFCR70OS2P Office slate Anixter No. Vendor No. Description 314436 OFR20OFCR70OG2P Office gray 268348 OFR20MPTOB Office beige 314434 OFR20OFCR70OB2P Office beige 268349 OFR20MPTOS Office slate 314437 OFR20OFCR70MT2P Medium tone 268350 OFR20MPTOG Office gray 314449 OFR20MPTMT Medium tone ONE-CUBICLE DROP BYPASS FITTING Allows the transition from office furniture raceway run horizontally along partition WALL ENTRANCE FITTING wall, around existing furniture pole, to office furniture corner raceway mounted Allows for entry from wall to office furniture raceway run horizontally along vertically in one cubicle at the intersection of partitions. partition walls. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 314438 OFR20OFCR70OB1P Office beige 268351 OFR20WEOB Office beige 314439 OFR20OFCR70OS1P Office slate 268352 OFR20WEOS Office slate 314440 OFR20OFCR70OG1P Office gray 268353 OFR20WEOG Office gray 314441 OFR20OFCR70MT1P Medium tone 314450 OFR20WEMT Medium tone END CAP FITTING RIGHT ANGLE FITTING For use with the corner raceway base (OFCR70**6.) Opening in fitting allows cord Used to join sections of office furniture raceway (OFR20**6) at 90º flat junction. passage through fittings such as monitor and keyboard cables. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 268354 OFR20RAOB Office beige 268339 OFCR70ECOB Office beige 268355 OFR20RAOS Office slate D 268340 OFCR70ECOS Office slate 268356 OFR20RAOG Office gray 268341 OFCR70ECOG Office gray 314451 OFR20RAMT Medium tone 314443 OFCR70ECMT Medium tone TEE FITTING SPILL-OVER FITTING Used to create an undivided tee junction between sections of office furniture Allows transition from office furniture raceway run horizontally along partition wall raceway (OFR20**6). to vertical raceway in one location along partition wall. Anixter No. Vendor No. Description Anixter No. Vendor No. Description 268357 OFR20TOB Office beige 268342 OFR20SOOB Office beige 268358 OFR20TOS Office slate 268343 OFR20SOOS Office slate 268359 OFR20TOG Office gray 268344 OFR20SOOG Office gray 314452 OFR20TMT Medium tone 314444 OFR20SOMT Medium tone CROSS FITTING DOUBLE SPILL-OVER FITTING Used to join office furniture raceway (OFR20**6) at four corners. Fitting is used to spill over both sides of the furniture partitions at the Anixter No. Vendor No. Description same location. 268360 OFR20CROB Office beige Anixter No. Vendor No. Description 268361 OFR20CROS Office slate 314445 OFR20DSOOB Office beige 268362 OFR20CROG Office gray 305052 OFR20DSOOS Office slate 314453 OFR20CRMT Medium tone 314446 OFR20DSOOG Office gray 314447 OFR20DSOMT Medium tone INSIDE CORNER FITTING Used to join office furniture raceway (OFR20**6) at inside corner. DESK-MOUNT BOX Anixter No. Vendor No. Description Box accepts office furniture snap-on faceplates as well as 70 mm screw-on 268363 OFR20ICOB Office beige standard faceplates. Designed for use with OFVR5**6 raceway and OFR20SO88 spill-over fitting. 268364 OFR20ICOS Office slate Anixter No. Vendor No. Description 268365 OFR20ICOG Office gray 268345 OFR20DMBOB Office beige 314454 OFR20ICMT Medium tone 268346 OFR20DMBOS Office slate Request the latest literature and guides from Anixter. 4.142 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway PANDUIT OUTSIDE CORNER FITTING Anixter No. Vendor No. Description Used to join office furniture raceway (OFR20**6) at outside corner. 268420 OF70FV2OG Office gray Anixter No. Vendor No. Description 314467 OF70FV2MT Medium tone 268366 OFR20OCOB Office beige VERTICAL SLOPED FACEPLATE - 4-PORT 268367 OFR20OCOS Office slate Single-gang vertical sloped communications faceplate accepts up to four MINI-COM 268369 OFR20OCOG Office gray modules (not included). 314455 OFR20OCMT Medium tone Anixter No. Vendor No. Description 268422 OF70FV4OB Office beige COUPLER FITTINGS 268423 OF70FV4OS Office slate Used to join sections of office furniture raceway (OFR20**6) together inline. 268424 OF70FV4OG Office gray Anixter No. Vendor No. Description 314468 OF70FV4MT Medium tone 268370 OFR20CCOB-X Office beige 268371 OFR20CCOS-X Office slate 268372 OFR20CCOG-X Office gray 314456 OFR20CCMT-X Medium tone LONG COUPLER FITTINGS Used to bridge office furniture raceway (OFR20**6) between panel sections. Anixter No. Vendor No. Description 314457 OFR20LCOB Office beige 314458 OFR20LCOS Office slate 314459 OFR20LCOG Office gray 314461 OFR20LCMT Medium tone END CAP FITTING Used to cover end of office furniture raceway (OFR20**6) at end of run. Anixter No. Vendor No. Description 268373 OFR20ECOB Office beige 268374 OFR20ECOS Office slate 268375 OFR20ECOG Office gray 314462 OFR20ECMT Medium tone HORIZONTAL SLOPED FACEPLATE - 2-PORT Single-gang horizontal sloped communications faceplate accepts up to two MINI-COM modules (not included). Anixter No. Vendor No. Description 268399 OF70FH2OB Office beige 268402 OF70FH2OS Office slate 268404 OF70FH2OG Office gray 314464 OF70FH2MT Medium tone HORIZONTAL SLOPED FACEPLATE - 4-PORT Single-gang horizontal sloped communications faceplate accepts up to four MINI-COM modules (not included). Anixter No. Vendor No. Description 268407 OF70FH4OB Office beige 268409 OF70FH4OS Office slate 268411 OF70FH4OG Office gray 314466 OF70FH4MT Medium tone VERTICAL SLOPED FACEPLATE - 2-PORT Single-gang vertical sloped communications faceplate accepts up to two MINI-COM modules (not included). Anixter No. Vendor No. Description 268414 OF70FV2OB Office beige 268418 OF70FV2OS Office slate Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.143 Surface Raceway PANDUIT Raceway;Nonmetallic/10510 Index1.Support and Supplies//Physical Support Structure//Raceway OUTSIDE CORNER FITTING Used to join Cove Raceway at outside corners. Maintains a minimum 1 in. bend PAN-WAY Cove Raceway System radius of cabling. PANDUIT PR11254V2-18367.eps Anixter No. Vendor No. Description 268408 WCM35OCIW Off white TEE FITTING Used to join sections of Cove Raceway to form a "tee" junction. Maintains a minimum 1 in. bend radius of cabling. Anixter No. Vendor No. Description 268410 WCM35TIW Off white TEE FITTING INSERT Mounts inside Cove Raceway tee fitting to maintain channel separation at tee junctions. Maintains a minimum 1 in. bend radius of cabling. PAN-WAY Cove Raceway is a two-piece multichannel raceway, which has the Anixter No. Vendor No. Description appearance of architectural molding that allows you to route, conceal, protect and terminate power and/or data cabling. This aesthetically pleasing and unique design 268412 WCM35TI Off white softens the horizontal angles between wall and ceiling or the vertical angles between TRANSITION FITTING two walls. Cove Raceway may be painted to match any décor. Used to transition from Cove Raceway to PAN-WAY T-45 raceway and LD FEATURES series raceway. • UL and CSA rated to 600 V Anixter No. Vendor No. Description • Bend radius control is maintained throughout the entire system as required by 268413 WCM35TRIW Off white ANSI/TIA 568-B and 569-B WIRE RETAINER • Tamper-resistant Holds wires in place and will not interfere with cover installation. 10 per pack. • Transitions to PANDUIT T-45, and LD raceway • Supplied with prepunched mounting holes Anixter No. Vendor No. Description 268415 WCM35WR-X Gray COVE RACEWAY BASE D Dimensions: 3.50 in. W x 3.50 in. H BACKFEED FITTING Cove Raceway backfeed fitting with inserts allows cable entry and exit through the Anixter No. Vendor No. Description back of the raceway and conduit. Breakouts include 1/2 in., 3/4 in. and 1 in. 268391 WCM35BIW8 Off white, 8 ft. Anixter No. Vendor No. Description COVE RACEWAY COVER 268416 WCM35BFIW Off white Anixter No. Vendor No. Description LOW-PROFILE TRANSITION FITTING 268400 WCM35CIW8 Off white, 8 ft. Used to transition from Cove Raceway to PAN-WAY LDPH5 and LD5 raceway. COVE RACEWAY DIVIDER WALL Anixter No. Vendor No. Description Used to create separate channels in Cove Raceway base. 268417 WCM35TR5IW Off white Anixter No. Vendor No. Description LOW-PROFILE TRANSITION FITTING 268401 WCM35DW8 Off white, 8 ft. Used to transition from Cove Raceway to PAN-WAY LDPH10 and LD10 raceway. COVER COUPLER FITTING Anixter No. Vendor No. Description Used to join two pieces of Cove Raceway cover together. 10 per pack. 268419 WCM35TR10IW Off white Anixter No. Vendor No. Description LOW-PROFILE TRANSITION FITTING 268403 WCM35CCIW-X Off white Used to transition from Cove Raceway to PAN-WAY T70 raceway. END CAP FITTING Anixter No. Vendor No. Description Used to terminate or to enter the raceway. Includes two breakouts for 1/2 in. and 314502 WCM35TR70IW Off white 3/4 in. conduit. DEVICE BOX AND FACEPLATE ADAPTER Anixter No. Vendor No. Description Used for power and/or data. Can be used with screw-on single- or double-gang 268405 WCM35ECIW Off white faceplates and snap-on single-gang faceplates. INSIDE CORNER FITTING Anixter No. Vendor No. Description Used to join Cove Raceway at inside corners. Maintains a minimum 1 in. bend radius 268421 WCM35DBFIW Off white of cabling. Anixter No. Vendor No. Description 268406 WCM35ICIW Off white Request the latest literature and guides from Anixter. 4.144 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway Wiremold ./Raceway;Metallic/2723 Index1.Support and Supplies//Physical Support Structure//Accessories PLUGMOLD MULTIOUTLET STRIPS Plugmold Multioutlet Strips deliver power where you need it. V2000 Two-piece Metallic Raceway Anixter No. Vendor No. Description WIREMOLD PR12034V2-21871.eps 232561 V20GB306 3 ft. Plugmold, 6 single outlets, 15 A 232562 V20GB512 5 ft. Plugmold, 5 single outlets, 15 A 232563 V20GB606 6 ft. Plugmold, 12 single outlets, 15 A 232564 V20GB612 6 ft. Plugmold, 6 single outlets, 15 A 232569 V20GB618 6 ft. Plugmold, 4 single outlets, 15 A 232571 V20GBA609 6 ft. Plugmold, 8 single outlets, 15 A 232572 V20GBA618 6 ft. Plugmold, 4 single outlets, 15 A Raceway;Metallic/2725 Index1.Support and Supplies//Physical Support Structure//Accessories V2400 Two-piece Metallic Raceway FEATURES WIREMOLD PR12035V2-21874.eps • Steel raceway provides superior strength for any dry location installation • Compact, low-profile appearance requires minimum space and blends with any decor • Ivory ScuffCoat finish is scratch-resistant and can be painted over with latex paint LINEAR RACEWAY Anixter No. Vendor No. Description 232536 V2000BC Base and cover, 5 ft. length 232537 V2000B-5 Base only, 5 ft. length 232538 V2000C Cover only, 5 ft. length FEATURES • V2400 dimensions - 1 29/32 in. (48 mm) wide x 7/8 in. (22.2 mm) deep FITTINGS • Steel raceway provides superior strength for any dry location with greater wire Anixter No. Vendor No. Description capacity than V2000 272728 W30/W30G Pressure-type wire connector • Single- and dual-compartment, attractive, low-profile raceway design 232539 2000WC Wire clip • Ivory ScuffCoat finish is scratch-resistant and can be painted over with 232541 2001 Coupling latex paint 232542 V2006 Cover clip • Removable cover 232543 2009 Ground clamp LINEAR RACEWAY 232544 V2010A3 Entrance end fitting, 4 1/8 in. L Anixter No. Vendor No. Description 232545 V2010A2 Entrance end fitting, 2 1/8 in. L 232580 V2400BD Divided base only, 10 ft. length 232546 V2010B Blank end fitting 232581 V2400C Cover only, 5 ft. length 232547 V2011 90° flat elbow 232549 V2015 Tee FITTINGS 232551 2017TC Internal corner coupling Anixter No. Vendor No. Description 232554 V2018C External elbow cover 232582 2401D Coupling 232555 V2048 Single-gang receptacle box, 1 3/4 in. deep 232583 V2410BD Divided end fitting 232556 V2048-2 Double-gang receptacle box, 313597 V2410DFO FiberReady divided entrance end fitting 1 3/4 in. deep 232584 V2411DFO Divided flat elbow 232558 V2089 Side reducing connector to 313598 V2415DFO FiberReady 2 in. full capacity divided tee 500/700 system raceway 232585 V2417DFO Divided internal elbow 232560 V2089E End reducing connector to 232586 V2418DFO Divided external elbow 500/700 system raceway 232588 V2435D Divided feed box RACEWAY CUTTER 232589 V2444D Single-gang box Anixter No. Vendor No. Description 232590 V2444D-2A Double-gang box 232575 620 Base and cover shear 264728 5507-4TJ Faceplate accepts four Ortronics TracJack 232577 620BCK Replacement blade for Part No. 232575 267786 55076TJ Faceplate accepts six Ortronics TracJack 251641 5507D Faceplate accepts duplex receptacle 232591 V4089 V4000 System to V2400 System adapter Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.145 Surface Raceway Wiremold (continued) V2400 Two-piece Metallic Raceway Anixter No. Vendor No. Description 242013 V3015E Tee 3000 V2400 TWO-PIECE PLUGMOLD MULTI-OUTLET SYSTEMS PR12036V2-25503.eps 242286 V3017TCE Interior corner coupling 3000 242012 V3018AE Exterior corner coupling 3000 267789 V3048R Rectangular device plate 3000 267791 V3027AE Single receptacle plate 3000, 1.38 in. to 1.4 in. diameter 267792 V3028 Utility box 3000 267794 V3033JE Single receptacle plate 3000, 1.56 in. to 1.57 in. diameter 267793 V3036HE Blank cover 3000 267799 V3040CE Single pole switch plate Ideal for short runs requiring additional outlets in electrically busy areas. 267800 V3043BE Duplex receptacle plate 3000 Anixter No. Vendor No. Description 267801 V3043GE Duplex receptacle and cover 3000 232592 V24GB306 6 outlet (5-20), 20 amp, 3 ft. long, ivory 267804 V3046BE Duplex receptacle cover 3000 232593 V24GB506 10 outlet (5-20), 20 amp, 5 ft. long, ivory Raceway;Metallic/13414 Index1.Support and Supplies//Physical Support Structure//Raceway 232594 V24GB606 12 outlet (5-20), 20 amp, 6 ft. long, ivory DS4000 Two-piece Metallic Raceway Raceway;Metallic/10384 Index1.Support and Supplies//Physical Support Structure//Raceway WIREMOLD PR12038V2-21880.eps V3000 Two-piece Metallic Raceway WIREMOLD PR12037V2-21877.eps D FEATURES • DS4000 dimensions - 5 1/2 in. (140 mm) wide x 2 1/16 in. (52 mm) deep Wiremold V3000 Two-piece Metallic Raceway is ideal for surface-mounting • Innovative profile, greater wiring capacity intermediate amounts of electrical wiring or communications cables. V3000 raceway • Unique downward-facing activations offers a low-profile appearance which blends with any decor. • 10 Gig capability, NetClear compliant FEATURES • Streamlined fittings meet TIA 569 requirements for communications pathways • Steel raceway provides superior strength for any dry-location installation • V3000 dimensions - 2 3/4 in. (70.0 mm) wide x 1 15/32 in. (37.0 mm) deep • Adjust-to-fit couplings for easy installation (included with base and fittings) • Rugged steel raceway provides superior strength for any • Tamperproof - ideal for security, alarm or other security-sensitive applications dry-location installation • UL 5 and ADA-compliant • Accepts industry-standard connectivity • ScuffCoat finish is scratch-resistant and can be painted over with latex paint • Removable cover for easy access • Designer ivory, gray, also available in black, bronze and aluminum material • Full line of fittings • Fittings have removable covers LINEAR RACEWAY • ScuffCoat finish is scratch-resistant and can be painted over with latex paint Anixter No. Vendor No. Description • Color: ivory finish 332001 DS4000B DS4000 base, 10 ft. Anixter No. Vendor No. Description 332002 DS4000C-DV Cover - designer ivory, 5 ft. 242011 V3000B Raceway base 3000, 10 ft. 332003 DS4000C-DG Cover - designer gray, 5 ft. 242014 V3000CE Raceway cover 3000, 5 ft. 332004 DS4047C-DV Single-channel NEMA device - 242007 V3003 Support clip 3000 designer ivory 242004 V3006E Cover clip 3000 332005 DS4047C-DG Single-channel NEMA device - 242284 V3010AE Entrance end fitting 3000 designer gray 242287 V3010B Blank end fitting 3000 242315 V3010C Entrance end fitting 3000 242288 V3011E 90° flat elbow 3000 242314 V3014C Wallbox connector 3000 Request the latest literature and guides from Anixter. 4.146 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway Wiremold FITTINGS LINEAR RACEWAY Anixter No. Vendor No. Description Anixter No. Vendor No. Description 332006 DS4000WC Wire clip holder 232595 V4000B-10 Base only, 10 ft. length 332007 DS4001 Adjust-to-fit coupling 232596 V4000C Cover only, 5 ft. length 332008 DS4010B-DV Blank end fitting - designer ivory 232597 G4000D Divider, 5 ft. length 332009 DS4010B-DG Blank end fitting - designer gray FITTINGS 332010 DS4010A-DV Entrance end fitting - designer ivory Anixter No. Vendor No. Description 332011 DS4010A-DG Entrance end fitting - designer gray 232598 G4000WC Wire clip 332012 DS4011-DV 90° flat elbow - designer ivory 232599 4001A Coupling 332013 DS4011-DG 90° flat elbow - designer gray 232600 4001DA Divider clip 332014 DS4017-DV Internal elbow - designer ivory 232602 V4010B Blank end fitting 332015 DS4017-DG Internal elbow - designer gray 273495 V4010DFO Entrance end fitting 332016 DS4018-DV External elbow - designer ivory 232604 V4011 90° flat elbow 332017 DS4018-DG External elbow - designer gray 232605 V4014A Wall box connector 332018 DS4047D-DV Single-channel NEMA device - designer ivory 232607 V4015 Tee 332019 DS4047D-DG Single-channel NEMA device - designer gray 232609 V4015D Divided tee 332020 DS4047R-DV Single-channel decorator device - 232611 V4017 Internal elbow designer ivory 232612 V4017N Inverted internal elbow 332021 DS4047R-DG Single-channel decorator device - designer gray 232613 G4017TCA Internal corner divider clip 332022 DS4047MAB-DV Single-channel MAB device - designer ivory 232614 4017/18RI 2 in. radius insert for 332023 DS4047MAB-DG Single-channel MAB device - designer gray internal/external elbow 332024 DSDWND-DV Downward duplex receptacle - designer ivory 232615 V4018 External elbow 332025 DSDWND-DG Downward duplex receptacle - designer gray 232617 V4050 Plastic device mounting plate 332026 DSDWNR-DV Downward decorator receptacle - 284671 V4047RX 2-gang rectangular opening designer ivory 284672 V4047RF 2-gang rectangular opening and 332027 DSDWNR-DG Downward decorator receptacle - designer gray modular furniture RACEWAY CUTTERS 284673 V4047JX 2-gang single round opening Anixter No. Vendor No. Description 284674 V4047C-2 2-gang device plate 332028 640DS Cover cutter 284676 V4047C-1 1-gang device plate 284677 V4047BX 2-gang duplex rectangular opening Raceway;Metallic/2726 Index1.Support and Supplies//Physical Support Structure//Accessories 284678 V4047BT 2-gang duplex and TracJack V4000 Two-piece Metallic Raceway 284679 V4047BS 2-gang duplex and Series II WIREMOLD PR12039V2-21883.eps 284680 V4047BF 2-gang duplex and mod furniture 284681 V4047BB 2-gang with two duplex openings 284682 V4047AX 2-gang single round opening 264728 5507-4TJ Faceplate accepts four Ortronics TracJack 267786 55076TJ Faceplate accepts six Ortronics TracJack 251641 5507D Faceplate accepts duplex receptacle RACEWAY CUTTERS Anixter No. Vendor No. Description FEATURES 232620 640B Base cutter • V4000 dimensions - 4 3/4 in. (121 mm) wide x 1 3/4 in. (44 mm) deep 232621 640BDK Replacement blade for Part No. 232620 • FiberReady 2 in. fiber optic/Cat 5e radius fittings 232622 640C Cover cutter • Steel raceway provides superior strength for any dry location installation • Large cross-section area provides ample space for large wiring requirements 232623 640CDK Replacement blade for Part No. 232622 • Dividable raceway base • Feeder or header system • Precut covers • 4050 nonmetallic device plates • UL 5 and ADA-compliant • ScuffCoat finish is scratch-resistant and can be painted over with latex paint • Color: ivory finish Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.147 Surface Raceway Wiremold Raceway;Metallic/2718 Index1.Support and Supplies//Physical Support Structure//Accessories FITTINGS AND SURFACE-MOUNT BOXES Compatible with both V500 and V700 raceway systems. V500/V700 One-piece Metallic Raceway Anixter No. Vendor No. Description WIREMOLD PR12040V2-21886.eps 232513 5701 Galvanized coupling 123986 V5703 Supporting clip 232514 5709 Ground clamp 232515 V5711LHA Internal twisted elbow (left) 232516 V5711RHA Internal twisted elbow (right) 232517 V5715 Tee 232518 V5741 Single-gang device box, 1 3/8 in. deep 232519 V5745 Switch and receptacle box, 1 3/4 in. deep 232520 V5747 Shallow single-gang receptacle box, 1 3/8 in. deep Wiremold V500/V700 One-piece Metallic Raceway is ideal for surface-mounting small 232521 V5747-2 Shallow double-gang receptacle box, amounts of electrical wiring or communications cables. Both V500 and V700 rugged 1 3/8 in. deep raceways offer a low-profile appearance which blends with any decor. 124060 V5748 Single-gang receptacle box, 1 3/4 in. deep FEATURES 232522 V5748-2 Double-gang receptacle box, • V500 dimensions - 3/4 in. (19.1 mm) wide x 17/32 in. (13.5 mm) deep 1 3/4 in. deep • V700 dimensions - 3/4 in. (19.1 mm) wide x 21/32 in. (16.7 mm) deep 232523 5782 1/2 in. conduit connector • Rugged steel raceway provides superior strength for any 202653 V5785 Combination connector dry-location installation 124045 V5786 Adjustable offset connector • Low-profile, unobtrusive appearance blends with any decor or setting 232525 V5752 Double-gang ivory alarm device box, • Base and cover are a preassembled one-piece unit 1 3/8 in. deep • Full line of fittings 232526 R5752 Double-gang red alarm device box, • Fittings have removable covers 1 3/8 in. deep • ScuffCoat finish is scratch-resistant and can be painted over with latex paint D • Ivory finish WALL SOURCE BOXES WSB SERIES Field installed dividers allow low-voltage and power in one box. LINEAR RACEWAY- BOTH SIZES Anixter No. Vendor No. Description Anixter No. Vendor No. Description 232527 WSB42-2 2-gang box, divider, mounting brackets 232488 V500-5 V500 raceway, 5 ft. length 232528 WSB07-2A Device mounting bracket and trim ring 232489 V500 V500 raceway, 10 ft. length 232529 WSB42-4 4-gang box, dividers, mounting brackets 232490 V700-5 V700 raceway, 5 ft. length 232530 WSB07-4A Device mounting bracket and trim ring 124037 V700 V700 raceway, 10 ft. length 264728 5507-4TJ Faceplate accepts four Ortronics TracJack FITTINGS - V500 SYSTEM 267786 55076TJ Faceplate accepts six Ortronics TracJack Anixter No. Vendor No. Description 251641 5507D Faceplate accepts duplex receptacle 232503 502 Plated bushing RACEWAY CUTTERS 182580 V504 Strap Anixter No. Vendor No. Description 232508 V518 External elbow 232531 605 V500 system raceway cutter 232507 V517 Internal elbow 232532 605K Replacement blade for Part No. 232531 232506 V512 45° flat elbow 232533 607 V700 system raceway cutter 232505 V511 90° flat elbow 232534 607K Replacement blade for Part No. 232533 232504 V506 Connection cover 232535 600B V500/V700 system Benfield bender FITTINGS - V700 SYSTEM Anixter No. Vendor No. Description 123998 V718 External elbow 123955 V717 Internal elbow 232511 V712 45° flat elbow 123972 V711 90° flat elbow 123979 V706 Connection cover 123809 V704 Strap 232509 702 Plated bushing Request the latest literature and guides from Anixter. 4.148 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Surface Raceway Wiremold Raceway;Nonmetallic/2731 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description Eclipse Series Nonmetallic Raceway 277560 PN05F17FW Internal elbow 284703 PN05F19FW External data elbow WIREMOLD PR12041V2-21868.eps 284704 PN05F18FW External elbow 277557 PN05F06FW Cover clip 284706 PN05F15FW Tee fitting COMBINATION FITTINGS Fog white Anixter No. Vendor No. Description 284707 PN10F21FW Combination entrance fitting 284708 PN153RFW Reducers FEATURES 277564 PN05F86FW Ceiling fitting • PN03 dimensions - 13/16 in. (20.6 mm) wide x 1/2 in. (12.7 mm) deep PN10 SERIES FITTINGS • PN05 dimensions - 1 1/8 in. (29 mm) wide x 5/8 in. (15.9 mm) deep Fog white • PN10 dimensions - 1 11/16 in. (43 mm) wide x 13/16 in. (20.6 mm) deep • Designed for use with Ortronics TracJack and Series II devices Anixter No. Vendor No. Description • Accommodates communications or power wiring 284710 PN10F86FW Ceiling fitting • Adhesive back for low-voltage (under 50 V) applications 284711 PN10F20FW End cap • Lightweight and easy to handle 277568 PN10F11FW Flat elbow • Raceway available in three sizes 277570 PN10F17FW Internal elbow • Snap-on latching cover 284715 PN10F19FW External data elbow • Built-in wire retainers 284716 PN10F18FW External elbow • UL Listed 284717 PN10F06FW Cover clip • Fog white, ivory or white color. (Fog white matches Ortronics 277569 PN10F15FW Tee fitting Connectivity Systems) ECLIPSE BOXES FOR USE WITH PN03, PN05 AND PN10 SERIES RACEWAYS LINEAR RACEWAY Fog white Fog white Anixter No. Vendor No. Description Anixter No. Vendor No. Description 284719 PBB2S2FW Bezel box Ortronics Series II 284683 PN03L08FW PN03 small latching raceway, 8 ft. length 284720 PBB4TJFW Bezel box Ortronics TracJack 277565 PN05L08FW PN05 small latching raceway, 8 ft. length 284721 PDB1S2FW Small data box Ortronics Series II 284686 PN10L08FW PN10 small latching raceway, 8 ft. length 284722 PDB2S2FW Large data box Ortronics Series II 284688 PN03L10FW PN03 small latching raceway, 284723 PDB2TJFW Small data box Ortronics TracJack 10 ft. length 284724 PDB4TJFW Large data box Ortronics TracJack 284689 PN05L10FW PN05 small latching raceway, 284725 PSB1FW Single-gang power box 10 ft. length 284726 PSB2FW Double-gang power box 284691 PN10L10FW PN10 small latching raceway, 10 ft. length LINEAR RACEWAY PN03 SERIES FITTINGS Ivory Fog white Anixter No. Vendor No. Description Anixter No. Vendor No. Description 232731 PN03L08V PN03 small latching raceway, 8 ft. length 284693 PN03F20FW End cap 232732 PN05L08V PN05 small latching raceway, 8 ft. length 284694 PN03F11FW Flat elbow 232734 PN10L08V PN10 small latching raceway, 8 ft. length 284695 PN03F17FW Internal elbow PN03 SERIES FITTINGS 284696 PN03F19FW External data elbow Ivory 284697 PN03F18FW External elbow Anixter No. Vendor No. Description 284698 PN03F06FW Cover clip 232736 PN03F20V End cap 284699 PN03F15FW Tee fitting 232737 PN03F11V Flat elbow PN05 SERIES FITTINGS 232738 PN03F17V Internal elbow Fog white 232739 PN03F19V External data elbow Anixter No. Vendor No. Description 232740 PN03F18V External elbow 284700 PN05F20FW End cap 232741 PN03F06V Cover clip 277558 PN05F11FW Flat elbow 232742 PN03F15V Tee fitting Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.149 Surface Raceway Wiremold PN03 SERIES FITTINGS (continued) Eclipse Series Nonmetallic Raceway White PN05 SERIES FITTINGS Anixter No. Vendor No. Description Ivory 266313 PN03F20WH End cap Anixter No. Vendor No. Description 266322 PN03F11WH Flat elbow 232743 PN05F20V End cap 266310 PN03F17WH Internal elbow 232744 PN05F11V Flat elbow 266312 PN03F19WH External data elbow 232745 PN05F17V Internal elbow 266311 PN03F18WH External elbow 232746 PN05F19V External data elbow 264022 PN03F06WH Cover clip 232747 PN05F18V External elbow 264023 PN03F15WH Tee fitting 232748 PN05F06V Cover clip PN05 SERIES FITTINGS 232749 PN05F15V Tee fitting White COMBINATION FITTINGS Anixter No. Vendor No. Description Ivory 266319 PN05F20WH End cap Anixter No. Vendor No. Description 266315 PN05F11WH Flat elbow 232750 PN10F21V Combination entrance fitting 266316 PN05F17WH Internal elbow 232751 PN153RV Reducers 266318 PN05F19WH External data elbow 232752 PN05F86V Ceiling fitting 266317 PN05F18WH External elbow 264011 PN05F06WH Cover clip PN10 SERIES FITTINGS Ivory 264024 PN05F15WH Tee fitting Anixter No. Vendor No. Description COMBINATION FITTINGS 232753 PN10F86V Ceiling fitting White 232754 PN10F20V End cap Anixter No. Vendor No. Description 232755 PN10F11V Flat elbow 266329 PN10F21WH Combination entrance fitting D 232756 PN10F17V Internal elbow 266334 PN153RWH Reducers 232757 PN10F19V External data elbow 266320 PN05F86WH Ceiling fitting 232758 PN10F18V External elbow PN10 SERIES FITTINGS 232759 PN10F06V Cover clip White 232760 PN10F15V Tee fitting Anixter No. Vendor No. Description ECLIPSE BOXES FOR USE WITH PN03, PN05 AND PN10 SERIES RACEWAYS 266330 PN10F86WH Ceiling fitting Ivory 266328 PN10F20WH End cap Anixter No. Vendor No. Description 264012 PN10F11WH Flat elbow 232761 PBB2S2V Bezel box, Ortronics Series II 266324 PN10F17WH Internal elbow 232762 PBB4TJV Bezel box, Ortronics TracJack 266327 PN10F19WH External data elbow 232763 PDB1S2V Small data box, Ortronics Series II 266325 PN10F18WH External elbow 232764 PDB2S2V Large data box, Ortronics Series II 264010 PN10F06WH Cover clip 232765 PDB2TJV Small data box, Ortronics TracJack 264025 PN10F15WH Tee fitting 232766 PDB4TJV Large data box, Ortronics TracJack ECLIPSE BOXES FOR USE WITH PN03, PN05 AND PN10 SERIES RACEWAYS 232767 PSB1V Single-gang power box White 232768 PSB2V Double-gang power box Anixter No. Vendor No. Description LINEAR RACEWAY 266265 PBB2S2WH Bezel box, Ortronics Series II White 266267 PBB4TJWH Bezel box, Ortronics TracJack Anixter No. Vendor No. Description 266269 PDB1S2WH Small data box, Ortronics Series II 264005 PN03L08WH PN03 small latching raceway, 8 ft. length 266272 PDB2S2WH Large data box, Ortronics Series II 264006 PN05L08WH PN05 small latching raceway, 8 ft. length 266609 PDB2TJWH Small data box, Ortronics TracJack 264008 PN10L08WH PN10 small latching raceway, 8 ft. length 266274 PDB4TJWH Large data box, Ortronics TracJack 266336 PSB1WH Single-gang power box 266337 PSB2WH Double-gang power box Request the latest literature and guides from Anixter. 4.150 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Cable Routing and Wiring Duct TE Connectivity ./Duct;Cable Routing/16389 Index1.Support and Supplies//Physical Support Structure//Raceway FiberGuide Fiber Raceway TE CONNECTIVITY PR28915V2-214746.eps TE's FiberGuide fiber management systems offer the greatest breadth of optical raceway products in the industry. In response to customer requirements, TE Connectivity continues to innovate and improve FiberGuide systems, adding greater flexibility and driving down installation time to ensure a smooth deployment. FiberGuide is a raceway system designed to protect and route fiber optic patch cords, multi-fiber cable assemblies and intrafacility fiber cable (IFC) to and from fiber splice enclosures, fiber distribution frames and fiber optic terminal devices. FiberGuide ensures a two-inch minimum bend radius is maintained throughout the system. Tool-less, Snap-Fit junctions, cover options and Plenum Express Exit drops significantly reduce the amount of time required for installation. FiberGuide is available in 2x2, 3x6, 4x4, 4x6, 4x12 and 4x24 sizes. FEATURES • Speed of installation • Speed of deployment • Raceway flexibility • Fiber protection • Strength and durability Anixter No. Vendor No. Description 205864 FGS-HNTR-5/8 New threaded rod bracket kit, 5/8 in. 238811 FGS-HNTR-1/2 New threaded rod bracket kit, 1/2 in. 222020 FGS-HTHR-5/8-12 Threaded rod, 5/8 - 11 x 12 in. 228349 FGS-HTHR-5/8-72 Threaded rod, 5/8 - 11 x 72 in. 378483 FGS-HETR-5/8-A Modified existing threaded rod bracket kit, 5/8 in. 386016 FGS-MDSP-B 6 in. downspout 394664 FGS-MSHS-A 4 in., 6 foot long, horizontal straight section 394667 FGS-MDSP-A 4 in. downspout 394668 FGS-MFAW-A 4x4 snap fit junction 394669 FGS-MEXP-A/B/F 2 in. Express Exit downspout Please call your local sales representative for additional size and raceway options. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.151 Cable Routing and Wiring Duct PANDUIT ./Duct;Cable Routing/11346 Index1.Support and Supplies//Physical Support Structure//Cable Runway Anixter No. Vendor No. Description FIBERRUNNER Routing System 245496 FRRA4X4YL 4 in. x 4 in. fitting 245502 FRRASC4YL 4 in. x 4 in. fitting cover PANDUIT PR9748V2-15377.eps HORIZONTAL TEE FITTINGS AND SPLIT COVERS Used to join channel at tee intersections. Anixter No. Vendor No. Description 545363 FRT12X4YL 12 in. x 4 in. tee fitting 271401 FRTSC12YL 12 in. x 4 in. tee fitting cover 224973 FRT6X4YL 6 in. x 4 in. tee fitting 224974 FRTSC6YL 6 in. x 4 in. tee fitting cover 245503 FRT4X4YL 4 in. x 4 in. tee fitting 245504 FRTSC4YL 4 in. x 4 in. tee fitting cover The FIBERRUNNER Routing System is a system of channel, fittings and brackets FOUR-WAY CROSS FITTINGS AND SPLIT COVERS designed to segregate, route and protect fiber optic and high-performance copper Attaches to channel to create a horizontal four-way cross intersection. cabling. It is suited for data center applications where cable is routed from Anixter No. Vendor No. Description distribution areas to equipment cabinets or racks. It is also used in Telco Central 224979 FRFWC6X4YL 6 in. x 4 in. fitting Offices to route fiber optic jumper cables between fiber distribution frames and 224980 FRFWCSC6YL 6 in. x 4 in. fitting cover equipment bays. It can be deployed over the racks or in approved under floor applications. The channel and fittings are made from V-0 flame class-rated plastic 279737 FRFWC4X4YL 4 in. x 4 in. fitting material. Mounting brackets are steel. 279738 FRFWCSC4YL 4 in. x 4 in. fitting cover FEATURES END-CAP FITTINGS • Channel and covers are 6 ft. lengths Used for closing off open ends of the channel. • Part numbers shown are yellow, also available in orange and black Anixter No. Vendor No. Description 545365 FREC12X4YL 12 in. x 4 in. CHANNEL 224991 FREC6X4YL 6 in. x 4 in. D Anixter No. Vendor No. Description 245506 FREC4X4YL 4 in. x 4 in. 260510 FR12X4YL6 12 in. x 4 in. 224964 FR6X4YL6 6 in. x 4 in. VERTICAL TEE FITTING 245491 FR4X4YL6 4 in. x 4 in. Attaches to channel and/or fittings to create a 90° vertical drop from a 276942 HS2X2YL6NM 2 in. x 2 in. horizontal run. Anixter No. Vendor No. Description SNAP-ON HINGED COVER 545368 FRVT12X4YL 12 in. x 4 in. Anixter No. Vendor No. Description 224981 FRVT6X4YL 6 in. x 4 in. 271402 FRHC12YL6 12 in. x 4 in. 245508 FRVT4X4YL 4 in. x 4 in. 224968 FRHC6YL6 6 in. x 4 in. 257971 FVTHD2X2YL 2 in. x 2 in. 245494 FRHC4YL6 4 in. x 4 in. 276940 HC2YL6 2 in. x 2 in. INSIDE VERTICAL 45° FITTINGS Used to join channel at 45° inside corners. COUPLER FITTINGS (QUICKLOCK COUPLER) Anixter No. Vendor No. Description Preassembled to provide fast mechanical assembly of components. No tools 224988 FRIV456X4YL 6 in. x 4 in. required for installation, bolts loosen for component disassembly. 259684 FRIV454X4YL 4 in. x 4 in. Anixter No. Vendor No. Description 545367 FRBC12X4YL 12 in. x 4 in. OUTSIDE VERTICAL RIGHT ANGLE FITTINGS AND SPLIT COVERS 224970 FRBC6X4YL 6 in. x 4 in. Used to join channel at 90° outside corners. 245495 FRBC4X4YL 4 in. x 4 in. Anixter No. Vendor No. Description 272192 FBC2X2YL 2 in. x 2 in. 546968 FROVRA12X4YL 12 in. x 4 in. fitting 224986 FROVRA6X4YL 6 in. x 4 in. fitting HORIZONTAL RIGHT ANGLE FITTINGS AND SPLIT COVERS 224987 FROVRASC6YL 6 in. x 4 in. fitting cover Used to join channel at 90-degree horizontal junctions. 279740 FROVRA4X4YL 4 in. x 4 in. fitting Anixter No. Vendor No. Description 279741 FROVRASC4YL 4 in. x 4 in. fitting cover 545709 FRRA12X4YL 12 in. x 4 in. fitting 278561 FRRASC12YL 12 in. x 4 in. fitting cover 224975 FRRA6X4YL 6 in. x 4 in. fitting 224976 FRRASC6YL 6 in. x 4 in. fitting cover Request the latest literature and guides from Anixter. 4.152 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Cable Routing and Wiring Duct PANDUIT Duct;Cable Routing/977 REDUCER FITTINGS AND COVER Index1.Support and Supplies//Hardware and Supplies//Premise Applications Anixter No. Vendor No. Description FIBER-DUCT Routing System 545366 FRRF126YL 12 in. x 4 in. reduces to 6 in. x 4 in. PANDUIT PR9747V2-15374.eps 271406 FRRF126SCYL Cover for 12 in. x 4 in. to 6 in. x 4 in. reducer SPILL-OVER JUNCTIONS Assembled onto 12x4, 6x4, and 4x4 channels. Anixter No. Vendor No. Description 411284 FRSPJ4X4YL 4 in. x 4 in. exit THREE-SIDED BRC TRUMPET SPILL-OUTS Anixter No. Vendor No. Description 545739 FRTR6X4YL 6 in. x 4 in. The FIBER-DUCT Routing System is a complete fiber optic cable routing system that 245505 FRTR4X4YL 4 in. x 4 in. can be used for all fiber optic cabling installations. Used in telecommunications SPILL-OUTS TO 1.5 IN. INSIDE DIAMETER CORRUGATED TUBING closets, equipment rooms or in approved under floor applications. The channel comes with standard mounting holes. The specially designed fittings feature a Used to route one or two pieces of 1.5 in. inside diameter split corrugated tubing. minimum 2 in. bend radius to protect fiber optic cables. The channel and fittings are Anixter No. Vendor No. Description made from V-0 flame class-rated materials. 224982 FIDT4X4BL 2-port black spill-out FEATURES 271396 FIDT2X2YL 1-port yellow spill-out • Channel and covers are 6 ft. lengths CORRUGATED LOOM TUBING • All products shown are yellow, also available in orange and black Provides protection for fiber optic cables. SLOTTED CHANNEL Anixter No. Vendor No. Description Anixter No. Vendor No. Description 225014 CLT150F-X20 1.5 in. inside diameter corrugated loom tubing 227975 E2X2YL6 2 in. x 2 in. 255582 E4X4YL6 4 in. x 4 in. MOUNTING BRACKETS A full complement of brackets are available for attaching system components to SOLID CHANNEL ladder rack, threaded rod, auxiliary framing, strut, equipment racks and raised Anixter No. Vendor No. Description floor pedestals. 266896 S2X2YL6NM 2 in. x 2 in. Anixter No. Vendor No. Description 227974 S4X4YL6NM 4 in. x 4 in. 224997 FR6TRBN58 6 in. QUIKLOCK bracket for new 5/8 in. COVER threaded rod 224995 FR6TRBE58 6 in. QUIKLOCK bracket for existing 5/8 in. Anixter No. Vendor No. Description threaded rod 227977 C2YL6 2 in. x 2 in. 225002 FR6ALB 6 in. adjustable ladder rack bracket 227978 C4YL6 4 in. x 4 in. COUPLER FITTING Used to join two sections of channel together. Provides added strength and rigidity. Anixter No. Vendor No. Description 227979 FCF2X2YL 2 in. x 2 in. 227982 FCF4X4YL 4 in. x 4 in. HORIZONTAL RIGHT-ANGLE FITTING AND COVER Used to join channel at 90° horizontal junctions. Anixter No. Vendor No. Description 228038 FRA2X2YL 2 in. x 2 in. 228040 FRA4X4YL 4 in. x 4 in. HORIZONTAL TEE FITTING Used to join channel at tee intersections. Anixter No. Vendor No. Description 228029 FT2X2YL 2 in. x 2 in. 228030 FT4X4YL 4 in. x 4 in. Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.153 Cable Routing and Wiring Duct PANDUIT Duct;Cable Routing/3837 Index1.Support and Supplies//Physical Support Structure//Accessories (continued) FIBER-DUCT Routing System Type H Hinged Cover Wiring Duct FOUR-WAY CROSS FITTING AND COVER PANDUIT pr5397V2-15095.eps Attaches to channel to create horizontal four-way cross intersection. Anixter No. Vendor No. Description 228004 FFWC4X4YL 4 in. x 4 in. END-CAP FITTING Used for closing off open ends of the channel. Anixter No. Vendor No. Description 227992 FEC2X2YL 2 in. x 2 in. 227993 FEC4X4YL 4 in. x 4 in. VERTICAL TEE FITTING AND COVER Attaches to channel to create a 90° vertical drop from a horizontal run. Type H Hinged Cover Wiring Duct is a two-piece wide finger design duct with dual-sided hinging cover that can be opened up to 100° from either side of the duct. Anixter No. Vendor No. Description Ideal for applications that require frequent access, like in control panel or cabinet 228037 FVT4X4YL 4 in. x 4 in. wiring for equipment modifications or repair and in communications closets where INSIDE VERTICAL RIGHT-ANGLE FITTING AND COVER moves, adds and changes are frequent. Used to join channel at 90° inside corners. FEATURES Anixter No. Vendor No. Description • Made of lead-free PVC 276941 FIVRA2X2YL 2 in. x 2 in. • UL Recognized Component continuous use temperatures up to 50°C (122°F) • UL Flammability Rating V-0 OUTSIDE VERTICAL RIGHT-ANGLE FITTING AND COVER • Provided with mounting holes Used to join channel at 90° outside corners. Anixter No. Vendor No. Description LIGHT GRAY DUCT 228009 FOVRA2X2YL 2 in. x 2 in. Anixter No. Vendor No. Width (in.) Height (in.) 228010 FO D VRA4X4YL 4 in. x 4 in. 314503 H1.5X2LG6 1.75 1.98 314529 H1.5X3LG6 1.75 3.06 INSIDE VERTICAL 45° FITTING 250222 H2X2LG6 2.17 1.98 Used to join channel at 45° inside corners. 314530 H2X3LG6 2.17 3.06 Anixter No. Vendor No. Description 314531 H2X4LG6 2.17 4.10 228019 FIV454X4YL 4 in. x 4 in. 314532 H3X3LG6 3.25 3.06 OUTSIDE VERTICAL 45° FITTING AND COVER 314533 H3X4LG6 3.25 4.10 Used to join channel at 45° outside corners. 314534 H4X4LG6 4.25 4.10 Anixter No. Vendor No. Description LIGHT GRAY COVERS 228028 FOV454X4YL 4 in. x 4 in. Anixter No. Vendor No. Cover Size (in.) REDUCER FITTING AND COVER 314535 HC1.5LG6 1.5 Anixter No. Vendor No. Description 268966 HC2LG6 2.0 255581 FRF42YL 4 in. x 4 in. to 2 in. x 2 in. 314548 HC3LG6 3.0 314549 HC4LG6 4.0 BLACK DUCT Anixter No. Vendor No. Width (in.) Height (in.) 314550 H1.5X2BL6 1.75 1.98 314551 H1.5X3BL6 1.75 3.06 314552 H2X3BL6 2.17 3.06 250221 H2X2BL6 2.17 1.98 314553 H2X4BL6 2.17 4.10 314554 H3X3BL6 3.25 3.06 314555 H3X4BL6 3.25 4.10 262719 H4X4BL6 4.25 4.10 Request the latest literature and guides from Anixter. 4.154 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Cable Routing and Wiring Duct PANDUIT Duct;Cable Routing/1859 BLACK COVERS Index1.Support and Supplies//Hardware and Supplies//Premise Applications Anixter No. Vendor No. Cover Size (in.) Type G Wide Slot Wiring Duct 314556 HC1.5BL6 1.5 PANDUIT PR9746V2-15371.eps 265238 HC2BL6 2.0 314557 HC3BL6 3.0 262720 HC4BL6 4.0 Duct;Cable Routing/17483 Index1.Support and Supplies//Physical Support Structure//Accessories Type HN Hinged Cover Narrow Slot Wiring Duct PANDUIT PR29174V2-215818.eps Type G Wide Slot Wiring Duct is a wide finger, slotted wall duct for greater rigidity and larger slot width requirements. Perfect for applications requiring breakouts of larger wire diameters and higher wire load capacities. FEATURES • Made from lead-free PVC • UL Recognized Component continuous use temperature: 50°C (122°F) • UL 94 Flammability Rating of V-0 Type HN Narrow Slot Wiring Duct is ideal for high-density cabling applications that • Provided with mounting holes also require easy cable access for frequent equipment modifications or repairs where • Conforms with NFPA 79-2007 section 13.3.1 requirement for moves, adds and changes are common. Due to the hinging feature, Hinged Cover flame-retardant material Slotted Wall Wiring Duct reduces the time and hassle associated with removing and LIGHT GRAY DUCT reinstalling traditional duct cover to perform maintenance or changes. Anixter No. Vendor No. Width (in.) Height (in.) FEATURES 192897 G1X1.5LG6 1.0 1.5 • Made of lead-free PVC 198259 G1.5X2LG6 1.5 2.0 • UL Recognized Component continuous use temperatures up to 50°C (122°F) 198248 G2X4LG6 2.0 4.0 • UL Flammability Rating V-0 • Provided with mounting holes 198249 G3X2LG6 3.0 2.0 198250 G3X3LG6 3.0 3.0 LIGHT GRAY DUCT 189603 G4X5LG6 4.0 5.0 Anixter No. Vendor No. Width (in.) Height (in.) LIGHT GRAY COVERS 363212 HN1.5X2LG6 1.75 1.98 363215 HN1.5X3LG6 1.75 3.06 Anixter No. Vendor No. Cover Size (in.) 363216 HN2X2LG6 2.17 1.98 071956 C1LG6 1.0 363217 HN2X3LG6 2.17 3.06 097989 C1.5LG6 1.5 363218 HN2X4LG6 2.17 4.10 073147 C2LG6 2.0 363219 HN3X3LG6 3.25 3.06 074094 C3LG6 3.0 363220 HN3X4LG6 3.25 4.10 067767 C4LG6 4.0 363221 HN4X4LG6 4.25 4.10 WHITE DUCT LIGHT GRAY COVERS Anixter No. Vendor No. Width (in.) Height (in.) Anixter No. Vendor No. Cover Size (in.) 192899 G1X2WH6 1.0 2.0 314535 HC1.5LG6 1.5 192903 G3X2WH6 3.0 2.0 268966 HC2LG6 2.0 192913 G3X3WH6 3.0 3.0 314548 HC3LG6 3.0 198261 G4X3WH6 4.0 3.0 314549 HC4LG6 4.0 WHITE COVERS Anixter No. Vendor No. Cover Size (in.) 139996 C1WH6 1.0 096927 C3WH6 3.0 063652 C4WH6 4.0 Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.155 Cable Routing and Wiring Duct PANDUIT (continued) Type G Wide Slot Wiring Duct BLACK DUCT Anixter No. Vendor No. Width (in.) Height (in.) 250162 G1X1.5BL6 1.0 1.5 250163 G1X2BL6 1.0 1.5 250164 G1.5X2BL6 1.5 2.0 250165 G2X4BL6 2.0 4.0 250166 G3X2BL6 3.0 2.0 198251 G3X3BL6 3.0 3.0 250173 G4X3BL6 4.0 3.0 250174 G4X5BL6 4.0 5.0 BLACK COVERS Anixter No. Vendor No. Cover Size (in.) C1BL6 C1BL6 1.0 183502 C1.5BL6 1.5 181426 C2BL6 2.0 176239 C3BL6 3.0 176237 C4BL6 4.0 Duct;Cable Routing/3860 Index1.Support and Supplies//Hardware and Supplies//Premise Applications Type FL Flexible Wiring Duct PANDUIT PR20050V2-67704.eps D Type FL Flexible Wiring Duct is a one-piece slotted sidewall, open finger design wiring duct intended to route and protect installed in control panels applications that require flexibility. Perfect for control panel back planes and side walls, over hinges, to components mounted on control panels' doors. FEATURES • Flexible, polyproplene material • Rated for continuous use temperatures up to 65°C (149°F) • UL 94 Flammability Rating of V-2 • Factory-applied adhesive tape provided for easy mounting • Standard color is gray/green; also available in RAL 7040 light gray, call your local sales representative for ordering information. Anixter No. Vendor No. Description 314561 FL12X12LG-A 12 mm H x 12 mm W 314562 FL25X25LG-A 25 mm H x 25 mm W 314563 FL50X50LG-A 50 mm H x 50 mm W Request the latest literature and guides from Anixter. 4.156 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products J-hooks and Fasteners Cooper B-Line ./J-hooks;Cable Support/3804 Index1.Support and Supplies//Physical Support Structure//Accessories BRACKETS, CLAMPS AND BRIDLE RINGS PR22459V2-132818.eps Spring Steel Fasteners COOPER B-LINE Cooper B-Line offers an extensive line of spring steel fasteners designed to attach to structures and provide required cabling support. CABLE HOOKS PR22460V2-132816.eps Cable hooks in combination with other fasteners provide an economical solution for the attachment of Category 5, Category 6, fiber optic, innerduct and other communications cables directly to a variety of structures. Anixter No. Vendor No. Description 245218 BC1 Beam clamp for 1/4 in. or 3/8 in. rod 204627 BCHK2 Angle bracket kit 245234 BE24 Flange beam fasteners 1/8 in. to 1/4 in. Cooper B-Line cable hooks with exclusive Quick Latch cable retainers provide secure cable support and containment. Xylan-coated cable hooks provide a smooth 245235 BE58 Flange beam fasteners 5/16 in. to 1/2 in. "frictionless" cable surface. 245237 BM1 Metal stud plastic grommet Anixter No. Vendor No. Description 245238 BR324T Bridle ring 2 in. ring with 1/4 in. 268194 BCH21X 1 5/16 in. cable hook, Xylan-coated thread size 268195 BCH32X 2 in. cable hook, Xylan-coated 245239 BR324TW2 Bridle ring 2 in. ring with 1/4 in. thread 268196 BCH64X 4 in. cable hook, Xylan-coated size with rod fasteners 245214 BCH21 1 5/16 in. cable hook 245240 BR324W Bridle ring 2 in. ring with 1/4 in. thread size lag screw for wood 245231 BCH21W2 1 5/16 in. cable hook with rod fastener 245241 BR644T Bridle ring 4 in. ring with 1/4 in. 221885 BCH32 2 in. cable hook thread size 245229 BCH32AB 2 in. cable hook with all-thread 245236 BRC4 Staple-Lok multi-purpose cable support rod fastener 284558 BRS32A Bridle ring 2 in. with saddle 245230 BCH32C2 2 in. cable hook with beam clamp screw type 284559 BRS64A Bridle ring 4 in. with saddle 204635 BCH32RB 2 in. cable hook with angle bracket WALL-MOUNTING BRACKETS PR22462V2-132811.eps 231005 BCH32U24 2 in. cable hook with beam clamp hammer on type 232224 BCH32W2 2 in. cable hook with rod fastener 222878 BCH64 4 in. cable hook 232220 BCH64AB 4 in. cable hook with all-thread Designed for securing low-voltage Class 2 devices to 1/2 in. or 5/8 in. drywall with rod fastener out outlet box and for installing on the studs during new construction. 284540 BCH12 3/4 in. cable hook Anixter No. Vendor No. Description 284542 BCH12W2 3/4 in. cable hook with rod fastener 161258 BB10 Single-gang box eliminator bracket 245212 BB10L Single-gang box eliminator bracket with screws 316798 BB10P Nonmetallic single-gang low-voltage mounting bracket 245215 BB15 Stud-mounted cover plate mounting bracket, single gang 245213 BB20 Double-gang box eliminator bracket 376209 BB423208 Stud-mounted cover plate mounting bracket, double gang 245217 BB816 Box mounting bracket for 16 in. stud spacing Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.157 J-hooks and Fasteners ERICO ./J-hooks;Cable Support/15405 Index1.Support and Supplies//Physical Support Structure//Cable Runway Anixter No. Vendor No. Description CADDY CAT LINKS 370153 CATHP912SM Hammer-on assembly for 1/2 in. to 3/4 in. flange ERICO PR34486V2-255440.eps 370154 CATHPBC Screw-on beam assembly for 1/8 in. to 1/2 in. flange 370155 CATHPBC200 Screw-on beam assembly for 1/8 in. to 5/8 in. flange 370156 CATHPAF14 Z purlin assembly for 1/16 in. to 1/4 in. flange 370157 CATHPVF14 C purlin assembly for 1/16 in. to 1/4 in. vertical flange 370158 CATHPESC Easy strut assembly 370159 CATHP4Z34 Rod/flange assembly for #12 SWG - CADDY CAT LINKS is the most technologically advanced cable support system from 1/4 in. wire or plain rod, 1/4 in. threaded ERICO. It is cULus Listed and designed to meet the growing trend of larger diameter rod and 1/8 in. to 3/8 in. flange cable sizes from the cable industry. 370160 CATHP6Z34 Rod/flange assembly for 3/8 in. threaded rod and 3/8 in to 9/16 in. flange FEATURES 370161 CATHPCD0B Under floor assembly for 3/4 in. • Wide-base design with smooth, beveled edges provides a large bending radius round pedestal for 10 Gb systems for all J-hook sizes 370162 CATHPCD1B Under floor assembly for 7/8 in. to 1 in. • Accommodates a variety of attachment methods: threaded rod, wall-mount, etc. round pedestal or 3/4 in. square pedestal and is expandable for additional integrated pathways • All J-hooks can be attached to other fasteners in multiple configurations 370163 CATHPCD2B Under floor assembly for 7/8 in. (J-hook to J-hook, J-hook to fasteners) square pedestal • Requires no screws, rivets or special tools for installation of fastener 370164 CATHPCD2.5B Under floor assembly for 1 in. assemblies, tree bracket assemblies or puller assemblies square pedestal • Utilizes recycled raw materials in its manufacturing and is also recyclable itself 370165 CAT16HPTS Acoustical tee bar assembly D • Less time and labor are required for the CADDY CAT LINKS system installation CABLE PULLER PR34489V2-255460.eps compared to cable tray systems and no grounding is necessary Anixter No. Vendor No. Description 370137 CAT16HP 1 in. J-hook 370138 CAT32HP 2 in. J-hook 370139 CAT48HP 3 in. J-hook 370140 CAT64HP 4 in. J-hook 370141 CATHPAN Angle bracket with 3/16 in. mounting hole 370142 CATHPA4 Angle bracket with 1/4 in. mounting hole 370143 CATHPA6 Angle bracket with 3/8 in. mounting hole 370144 CATHPS4 Straight bracket with .282 in. Frees up the "second man" on cable pulling. Maintains proper bend radius and mounting hole protects cable during the installation. Kit includes beam clamp and 370145 CATHPTM Tree mounting bracket mouting hardware. 370146 CATHP24 Hammer-on assembly for 1/4 in. to Anixter No. Vendor No. Description 1/8 in. flange with 360° rotation 374842 CATHPPLR Cable puller for CATHP 370147 CATHP58 Hammer-on assembly for 5/16 in. to 1/2 in. flange with 360° rotation 370148 CATHP912 Hammer-on assembly for 1/2 in. to 3/4 in. flange with 360° rotation 370149 CATHPBCB Screw-on beam assembly for 1/8 in. to 1/2 in. flange with 360° rotation 370150 CATHPBC200B Screw-on beam assembly for 1/8 in. to 5/8 in. flange with 360° rotation 370151 CATHP24SM Hammer-on assembly for 1/8 in. to 1/4 in. flange 370152 CATHP58SM Hammer-on assembly for 5/16 in. to 1/2 in. flange Request the latest literature and guides from Anixter. 4.158 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products J-hooks and Fasteners ERICO J-hooks;Cable Support/10413 Index1.Support and Supplies//Physical Support Structure//Cable Runway • cULus Listed. Complies with NEC and TIA requirements for structured cabling systems CADDY CAT CM Cable Support System Anixter No. Vendor No. Description ERICO PR12078V2-21946.eps 196469 CAT12 Up to 16 4-pair UTP Cat 5e or 2-strand fiber optic cable, or 10 Cat 6 3/4 in. dia. loop 249454 CAT12TS Acoustical tee bar 222710 CAT124Z34 12 thru 1/4 in. wire, plain, or threaded rod and 1/8 in. thru 3/8 in. flange - 3/4 in. dia. loop 178304 CAT21 Up to 50 4-pair UTP Cat 5e or 2-strand CADDY CAT CM fiber optic cable or innerduct, or 32 Anixter No. Vendor No. Description Cat 6 1 5/16 in. dia. loop 256201 CAT100CM Double J-hook 197371 CAT2124SM Hammer-on 1/8 in. thru 1/4 in. flange - 256202 CAT200CM U-hook 200 mm/8 in. with T-nut 1 5/16 in. diameter loop 256203 CAT200CMLN U-hook 200 mm/8 in. less nut 197370 CAT2158SM Hammer-on 5/16 in. thru 1/3 in. flange - 256204 CAT300CM U-hook 300 mm/12 in. with T-nut 1 5/16 in. diameter loop 256205 CAT300CMLN U-hook 300 mm/12 in. less nut 194595 CAT21BC Screw-on 1/8 in. thru thru 1/2 in. flange - 256213 CATTBCM Protection tube 1 5/16 in. diameter loop 256208 CATRL200CM Roller 200 mm/8 in. (incl. rod and nuts) 178314 CAT32 Up to 80 4-pair UTP Cat 5e or 2-strand fiber optic cable or innerduct, or 50 256210 CATRL300CM Roller 300 mm/12 in. (incl. rod and nuts) Cat 6 2 in. dia. loop 256211 CATRT200CM Wire retainer 200 mm/8 in. 178194 CAT3224 Hammer-on 1/8 in. thru 1/4 in. flange - 256212 CATRT300CM Wire retainer 300 mm/12 in. rotates 360° - 2 in. dia. loop 331608 CATWMCM Wall bracket 184873 CAT324Z34 #12 thru 1/4 in. wire, plain or threaded STRUT, THREADED ROD AND HARDWARE rod and 1/8 in. thru 3/8 in. flange - 2 in. Anixter No. Vendor No. Description dia. loop 268101 0503710EG Threaded rod, 3/8 in. x 184872 CAT326Z34 3/8 in. plain or threaded rod and 3/8 in. 10 ft., electrogalvanized thru 9/16 flange - 2 in. dia. loop 268102 0505010EG Threaded rod, 1/2 in. x 178195 CAT32BC Screw-on 1/8 in. thru 1/2 in. flange - 2 in. 10 ft., electrogalvanized dia. loop 268103 0100037EG Hex nut, 3/8 in., electrogalvanized 196474 CAT425 Up to 425 4-pair UTP or 2-strand fiber 268104 0100050EG Hex nut, 1/2 in., electrogalvanized optic cable or 265 Cat 6 - 4 in. to 6 in. dia. loop 268105 0110037EG Round washer, 3/8 in., electrogalvanized 193654 CAT42524SM Hammer-on, 1/8 in. to 1/4 in. flange - 268106 0110050EG Round washer, 1/2 in., electrogalvanized 4 in. to 6 in. dia. loop J-hooks;Cable Support/1942 Index1.Support and Supplies//Hardware and Supplies//General Use 242630 CAT64 Up to 300 4-pair UTP Cat 5e or 2-strand CADDY CABLECAT Wide Base Cable Supports fiber optic cable, or 185 Cat 6 - 4 in. dia. loop ERICO PR34481V2-255430.eps 224142 CAT64AFAB3 J-hook angle bracket pre-riveted assembly 178315 CATHBA Extended J-hook angle bracket - 1/4 in. mounting hole 249455 CAT32AFAB6 Angle bracket assembly 3/8 in. mounting hole FEATURES • Provides proper support of fiber optic cables and innerduct • Many sizes and designs are available to attach to a variety of structures • Cost-effective alternative to expensive cable tray • Galvanized finish on the J-hooks provide smoother cable pull and greater corrosion resistance Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.159 J-hooks and Fasteners ERICO J-hooks;Accessories/2455 Fasteners;Cable Support/14672 Index1.Support and Supplies//Hardware and Supplies//General Use Index1.Support and Supplies//Hardware and Supplies//General Use CADDY CABLECAT Pulley CADDY CAT CR50 Cable Retainer ERICO PR1488V2-10682.eps ERICO PR34484V2-255420.eps CADDY CABLECAT pulley comes in 2 in. and 4 in. sizes to work on the CADDY 2 in. and The CADDY CAT CR50 Cable Retainer is a plastic, low-voltage cable support with an 4 in. J-hooks. easy-lock closure and an attachment base. The cable retainer from ERICO can be installed on walls, beams, studs, ceilings and racks - vertically or horizontally - which FEATURES makes it extremely versatile. The CADDY CAT CR50 support has rounded edges to • Frees up the "second man" on cable pulling avoid over-bending and kinking of cables. The patented closure on CADDY CAT • Accepts cable sizes up to 20 4-pair UTP Cat 5/5e cables (Part No. 228684) and CR50 permits cable to be added quickly and easily. The locking teeth retain bundled 40 4-pair UTP Cat 5/5e cables (Part No. 219915) cable in a one-piece support. The maximum cable capacity is 50 Cat 5e or 30 • Complies with the TIA standard requirement by minimizing the pull force on Cat 6 cables. The CADDY CAT CR50 is plenum rated for air-handling spaces. the cable FEATURES • Maintains proper bend radius and protects cable during installation • When the job is complete, the pulley and pin assembly can be removed leaving • Installs easily with nail, screw, push-pin or pop rivet the J-hook as a cable support • Works with Cat 5e and higher, fiber optic and coaxial cable • Allows for horizontal and vertical change of direction Anixter No. Vendor No. Description • UL Listed 228684 CAT32PLR 2 in. D • Suitable for air-handling spaces (plenum rated) 219915 CAT64PLR 4 in. • Complies with the NEC, the CEC and TIA standards Fasteners;Cable Support/2456 PR20365V2-73472.eps Index1.Support and Supplies//Hardware and Supplies//General Use CADDY CABLECAT Vertical Backbone Cable Support ERICO PR34480V2-255423.eps Anixter No. Vendor No. Description 345235 CATCR50 Cable retainer clip, plastic Backbone cables can be installed easily from the bottom floor as the vertical CADDY CABLECAT system acts as an installation tool as well as a support after installation. FEATURES • Makes vertical cable pulling easier with a locking mechanism that opens during pull and re-engages when the cable is released • Accepts a wide range of cable sizes: 75 4-pair UTP Cat 5e, 47 Cat 6, 10 25-pair UTP, one 100-pair through 600-pair • Rounded edges prevent cable damage Anixter No. Vendor No. Description 538494 CAT600R Strut-mount 219917 CAT600WM Wall-mount Request the latest literature and guides from Anixter. 4.160 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products J-hooks and Fasteners ERICO Fasteners;Cable Support/2151 Index1.Support and Supplies//Hardware and Supplies//General Use Anixter No. Vendor No. Description Bridle Ring 249489 BC200CD0B Set-screw type preassembled beam/conduit clamp 1/2 in. rigid or EMT ERICO PR1485V2-10674.eps 249491 BC200CD1B Set-screw type preassembled beam/conduit clamp 3/4 in. rigid or EMT 249493 CD0B 1/2 in. conduit clamp with retained bolt and built-in nut 249494 CD1B 3/4 in. conduit clamp with retained bolt and built-in nut Fasteners;Beam Clamps/17894 Index1.Support and Supplies//Physical Support Structure//Accessories CADDY ROD LOCK ERICO PR34495V2-255441.eps Threaded bridle rings are for voice communications, signal and control cable. Bridle rings are not recommended for high-performance cable. For high-performance cable see CADDY CABLECAT products. 2FMP28 hammer-on beam clamp with bridle rings shown above. Anixter No. Vendor No. Description 139593 4BRT20 1 1/4 in. dia., 1/4 in. - 20 thread 182267 4BRT32 2 in. dia., 1/4 in. - 20 thread 169091 4BRT64 4 in. dia., 1/4 in. - 20 thread 139596 2BRT20 1 1/4 in. dia., 10 - 24 thread 133583 2BRT32 2 in. dia., 10 - 24 thread CADDY ROD LOCK is an innovative threaded rod mounting system from ERICO that provides a quick and economical solution for installing electrical and mechanical Fasteners;Beam Clamps/989 Index1.Support and Supplies//Hardware and Supplies//Premise Applications systems supported by threaded rod. The system includes the CADDY ROD LOCK beam Beam Clamps clamp, channel nut and anchor screw. ERICO PR12077V2-108694.eps With its breakthrough "push-install" design, CADDY ROD LOCK simplifies the installation of threaded rod. Simply push the threaded rod through the mounting hole and it instantly locks into position. The system can even be used on threaded rod with slightly damaged threads or minor burrs, helping to save time by minimizing the amount of deburring that is usually required prior to installation. The unique features of the CADDY ROD LOCK system help to reduce the installation time of threaded rod compared to conventional fasteners. In many common applications, the system also requires less installation hardware. CADDY ROD LOCK BEAM CLAMP PR34496V2-255431.eps The universal beam clamp is used to support conduit, rod, bridle rings and J-hooks from an I-beam. Anixter No. Vendor No. Description 022851 2FMP28 Multipurpose clip that accommodates beam flange from 1/8 in. to 1/2 in. thickness, standard 1/4-20 or #10-24 threaded bridle rings, standard drive rings, as well as unthreaded bridle rings Load capacity: 500 lb. 139594 BC Beam clamp thru 1/2 in. flange holds Anixter No. Vendor No. Description 1/4-20 or #10-24 threaded bridle rings 444637 CRLB37EG For 3/8 in. threaded rod 169090 BC200 Beam clamp for 1/8 in. to 5/8 in. beam flange, supports 1/4 in. threaded rod, 1/4 in. threaded bridle rings and boxes 249487 BC260025EG Reversible set-screw type beam clamp for up to 3/4 in. beam flange, malleable; top or bottom mount of 1/4 in. dia. threaded rod, bridle rings and boxes from three positions - top, bottom, and back Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.161 J-hooks and Fasteners ERICO (continued) CADDY ROD LOCK Anixter No. Vendor No. Description 444630 SN25 For 1/4 in. threaded rod, 500 lb. CADDY ROD LOCK CHANNEL NUT PR34492V2-255435.eps load rating 444632 SN37 For 3/8 in. threaded rod, 1,350 lb. load rating 444633 SN50 For 1/2 in. threaded rod, 2,250 lb. load rating Fasteners;Cable Support/17560 Index1.Support and Supplies//Physical Support Structure//Cable Runway CADDY LINIAN Clips Load capacity: 750 lb. ERICO PR29203V2-215927.eps Anixter No. Vendor No. Description 444638 CRLS37EG For 3/8 in. threaded rod CADDY ROD LOCK ANCHOR SCREW PR34493V2-255448.eps The CADDY LINIAN Clip is a time-saving alternative for installing most low-voltage category cables, coax and ground wire cables on brickwork, concrete, masonry, wood studs and wood beams. The conventional method of attaching cable to wall surfaces involves anchoring a clip into a fixing hole and tightening down the screw prior to hanging the cable, which can be quite time consuming. The CADDY LINIAN Clip easily fixes cable by simply drilling a hole, positioning the clip around the cable, Load capacity: 660 lb. compressing the clip's legs and pushing the clip into the hole. After the hole is Anixter No. Vendor No. Description drilled, no tools are needed for installation, which reduces installation time by up to 444639 CRLA37EG 3/8" For 3/8 in. threaded rod 70 percent over conventional installation methods. D Fasteners;Nuts/17893 The CADDY LINIAN Clip features spring steel construction with a corrosion-resistant Index1.Support and Supplies//Physical Support Structure//Accessories coating applied. Spring steel is lightweight, durable and fire-resistant, withstanding SN Series Nut temperatures up to 510°C (265°F). The coating enables the clip to withstand the ERICO PR34494V2-255438.eps ASTM-B117-9 500-hour salt spray test. FEATURES • After the hole is drilled no tools are required for installation • Corrosion- and fire-resistant coating • Independently tested to resist tensile loads of up to 24 lb. • Installs up to 70 percent faster than saddle clips CABLE CLIP FOR COAX, CONTROL AND ALARM CABLE AND SPEAKER WIRE (6 TO 8 MM) PR29204V2-215923.eps The SN Series Nut is an innovative new solution for supporting loads on threaded rod. The SN Series Nut is extremely easy to install and can be positioned instantly on threaded rod at any location, helping to significantly reduce installation time. Simply open the nut and insert it on the threaded rod where needed. Then twist it to close and tighten with a wrench. It's that easy! It is designed to reduce the need for Anixter No. Vendor No. Description threading and offers an installation time savings of up to 50 percent compared to 425805 LI1 Red standard nuts and washers. The SN Series Nut also provides a load rating stronger 425807 LI1B Black than that of the threaded rod itself. 425808 LI1W White FEATURES CABLE CLIP FOR COAX, CONTROL AND ALARM CABLE AND • Reduces the need for threading compared to standard nuts and washers SPEAKER WIRE (9 TO 11 MM) • Offers up to 50 percent installation time savings • Ideal for retrofit projects, such as trapeze installations (simply add on Anixter No. Vendor No. Description as needed) 425810 LI2 Red • Can be used on threaded rod with slightly damaged threads or minor burrs 425811 LI2B Black • Load rating is stronger than the threaded rod itself 425813 LI2W White Request the latest literature and guides from Anixter. 4.162 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products J-hooks and Fasteners ERICO Fasteners;Cable Support/3813 Fasteners;Mounting Plates/1940 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Hardware and Supplies//General Use In-wall Cable Protection Mounting Plate ERICO PR12079V2-21949.eps ERICO PR34482V2-255454.eps Protective ring for cable through stud. FEATURES • Eliminates the need for an electrical box FEATURES • Mounts a standard wall plate anywhere on drywall • Meets the current 2005 NEC 300.4 required for low-voltage cabling • UL Listed Anixter No. Vendor No. Description • Can be used without installation tools for many applications 209634 MP1P Mounting plate Anixter No. Vendor No. Description 209635 MPAL2 Plastic double-gang mounting plate 249476 ESG1 Snap one grommet into standard 209636 MP34P Plastic 3- or 4-gang mounting plate 1 11/32 in. field-punched hole or snap 157703 MPLS Metal single-gang, screws to drywall two together into any shape (screws included) factory-punched hole 201826 MPLS2 Metal double-gang, screws to drywall (screws included) Fasteners;Nuts/3814 Index1.Support and Supplies//Hardware and Supplies//General Use 126092 MP1 Metal single-gang (no screws included) CADDY SLICK NUT 203200 MP1S Plate-mounting bracket for new work ERICO pr5409V2-10695.eps 249512 MP2S Double-gang plate mounting bracket for new work Fasteners;Mounting Plates/16391 Index1.Support and Supplies//Physical Support Structure//Accessories CADDY Within Wall Mounting Plate ERICO PR34487V2-255443.eps These one-piece strut nuts are an easy-to-use alternative to spring nuts and eliminate the need for an additional washer. They reduce installation time by up to 50 percent and reduces inventory by as much as 75 percent. Anixter No. Vendor No. Description 249507 SLICK250 Strut nut 1/4 in. - 20 threads 249509 SLICK375 Strut nut 3/8 in. - 16 threads FEATURES • Designed to eliminate gaps between the wall and faceplate • Highly visible yellow material helps prevent incorrect installation • Template dimples on the bracket provide measurement markings for simplified installation • Securing pins lock the plate into the drywall • Convenient removable tether assists with positioning Anixter No. Vendor No. Description 393015 MP1WWM CADDY Within Wall Mounting Plate for installing low-voltage cable, phone and data lines Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.163 J-hooks and Fasteners ERICO Fasteners;Security Camera Mounting Kits/15406 Index1.Support and Supplies//Physical Support Structure//Accessories WALL-MOUNT PR22448V2-133582.eps Security Camera Mounting Kits ERICO FEATURES • Multiple mounting kit options are available. Designed to simplify installation and enhance your security system • Each kit is designed to install quickly and easily • Supports a camera to comply with codes, standards and best practices • Eliminates threaded rod and associated hardware • Reduces installation time Anixter No. Vendor No. Description BEAM FLANGE PR22447V2-133585.eps 373939 SCMKW Security camera mounting kit, wall-mount Anixter No. Vendor No. Description 373937 SCMKB Security camera mounting kit, beam flange DOME PR22445V2-133589.eps D Anixter No. Vendor No. Description 373940 SCMKC Security camera mounting kit, dome TEE BAR PR22446V2-133581.eps Anixter No. Vendor No. Description 373938 SCMKT Security camera mounting kit, tee bar Request the latest literature and guides from Anixter. 4.164 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products J-hooks and Fasteners PANDUIT ./J-hooks;Cable Support/14631 Index1.Support and Supplies//Physical Support Structure//Accessories Std. Pkg. J-PRO Cable Support System Anixter No. Vendor No. Description Qty. PANDUIT PR20319V2-71723.eps 326890 JP75HBC25R-L20 With hammer-on beam clamp for 50 use with flanges 1/8 in. - 1/4 in. thick. Rotates 360 degrees 330981 JP75HBC75R-L20 With hammer-on beam clamp for 50 use with flanges 9/16 in. - 3/4 in. thick. Rotates 360 degrees 352900 JP75UF100-L20 With under floor clamp for use with 50 pedestal support 7/8 in. square or 1 1/8 in. - 1 3/8 in. in diameter J-PRO CABLE SUPPORT SYSTEM JP 131 - 1.31 in. (33 mm) FEATURES • Patented design provides complete horizontal and vertical 1 in. bend radius Std. Pkg. control that helps prevent degradation of cable performance Anixter No. Vendor No. Description Qty. • UL 2043 and CAN/ULC S102.2 approved and suitable for use in 324716 JP131W-L20 For wall-mount applications. One 50 air-handling spaces 1/4 in. (M6)-mounting hole for user • Cable tie channel allows user to install 3/4 in. TAK-TY Cable Tie to retain supplied screw cable bundle • Maximum bundle capacity: JP75 - .75 in. (19 mm), JP131 - 1.31 in. (33 mm), 324717 JP131CM-L20 With ceiling-mount bracket that 50 JP2 - 2 in. (50.8 mm), JP4 - 4 in. (101.6 mm) includes one each 3/16 in. (M5), 1/4 in. (M6), and 3/8 in. J-PRO CABLE SUPPORT SYSTEM (M10)-mounting hole JP 75 - .75 in. (19 mm) 324718 JP131DW-L20 With clip for use with #12 wire, 50 Std. threaded rod up to 3/8 in. in Pkg. diameter, or 1/8 in. to 1/4 in. Anixter No. Vendor No. Description Qty. thick flanges 324712 JP75W-L20 For wall-mount applications. One 50 324719 JP131SBC50R-L20 With screw-on beam clamp for use 50 1/4 in. (M6) mounting hole for user with flanges up to 1/2 in. thick. supplied screw Rotates 360 degrees 324713 JP75CM-L20 With ceiling-mount bracket that 50 330135 JP131HBC50R-L20 With hammer-on beam clamp for 50 includes one each 3/16 in. (M5), use with flanges 5/16 in. - 1/2 in. 1/4 in. (M6), and 3/8 in. (M10) thick. Rotates 360 degrees mounting hole 352858 JP131WP-L20 For powder actuated installation on 50 324714 JP75DW-L20 With clip for use with #12 wire, 50 walls. One 5/32 in. (M4) mounting threaded rod up to 3/8 in. in hole for user supplied fasteners diameter, or 1/8 in. to 1/4 in. 444597 JP131WP2-L20 For powder actuated installation on 50 thick flanges walls. One 5/32 in. (M4) and one 324715 JP75SBC50R-L20 With screw-on beam clamp for use 50 1/4 in. (M6) mounting hole for user with flanges up to 1/2 in. thick. supplied fasteners Rotates 360 degrees 352863 JP131SBC50-L20 With screw-on beam clamp for use 50 330980 JP75HBC50R-L20 With hammer-on beam clamp for 50 with flanges up to 1/2 in. thick use with flanges 5/16 in. - 1/2 in. 330133 JP131HBC25R-L20 With hammer-on beam clamp for 50 thick. Rotates 360 degrees use with flanges 1/8 in. - 1/4 in. 352855 JP75WP-L20 For powder actuated installation on 50 thick. Rotates 360 degrees walls. One 5/32 in. (M4) mounting 330137 JP131HBC75R-L20 With hammer-on beam clamp for 50 hole for user supplied fasteners use with flanges 9/16 in. - 3/4 in. 444605 JP75WP2-L20 For powder actuated installation on 50 thick. Rotates 360 degrees walls. One 5/32 in. (M4) and one 330131 JP131UF100-L20 With under floor clamp for use with 50 1/4 in. (M6) mounting hole for user pedestal support 7/8 in. or supplied fasteners 1 1/8 in. - 1 3/8 in. in diameter 352862 JP75SBC50-L20 With screw-on beam clamp for use 50 with flanges up to 1/2 in. thick Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.165 J-hooks and Fasteners PANDUIT J-PRO CABLE SUPPORT SYSTEM (continued) J-PRO Cable Support System JP 4 - 4 in. (101.5 mm) J-PRO CABLE SUPPORT SYSTEM Std. JP 2 - 2 in. (50.5 mm) Pkg. Std. Anixter No. Vendor No. Description Qty. Pkg. 324724 JP4W-X20 For wall-mount applications. One 10 Anixter No. Vendor No. Description Qty. 1/4 in. (M6) mounting hole for user 324720 JP2W-L20 For wall-mount applications. One 50 supplied screw 1/4 in. (M6) mounting hole for user 324725 JP4CM-X20 With ceiling-mount bracket that 10 supplied screw includes one each 3/16 in. (M5), 324721 JP2CM-L20 With ceiling-mount bracket that 50 1/4 in. (M6), and 3/8 in. includes one each 3/16 in. (M5), (M10)-mounting hole 1/4 in. (M6), and 3/8 in. (M10) 352830 JP4SBC50R-X20 With screw-on beam clamp for use 10 mounting hole with flanges up to 1/2 in. thick. 324722 JP2DW-L20 With clip for use with #12 wire, 50 Rotates 360 degrees threaded rod up to 3/8 in. in 352831 JP4HBC50R-X20 With hammer-on beam clamp for 10 diameter, or 1/8 in. to 1/4 in. use with flanges 5/16 in. - 1/2 in. thick flanges thick. Rotates 360 degrees 324723 JP2SBC50R-L20 With screw-on beam clamp for use 50 443698 JP4WP-X20 For powder actuated installation on 10 with flanges up to 1/2 in. thick. walls. One 5/32 in. (M4) mounting Rotates 360 degrees hole for user supplied fasteners 330193 JP2HBC50R-L20 With hammer-on beam clamp for 50 352860 JP4WP2-X20 For powder actuated installation on 10 use with flanges 5/16 in. - 1/2 in. walls. One 5/32 in. (M4) and one thick. Rotates 360 degrees 1/4 in. (M6) mounting hole for user 347579 JP2WP-L20 For powder actuated installation on 50 supplied fasteners walls. One 5/32 in. (M4) mounting 341303 JP4SBC50-X20 With screw-on beam clamp for use 10 hole for user supplied fasteners with flanges up to 1/2 in. thick D 444606 JP2WP2-L20 For powder actuated installation on 50 352899 JP4HBC25R-X20 With hammer-on beam clamp for 10 walls. One 5/32 in. (M4) and one use with flanges 1/8 in. - 1/4 in. 1/4 in. (M6) mounting hole for user thick. Rotates 360 degrees supplied fasteners. 352898 JP4HBC75R-X20 With hammer-on beam clamp for 10 324107 JP2SBC50-L20 With screw-on beam clamp for use 50 use with flanges 9/16 in. - 3/4 in. with flanges up to 1/2 in. thick thick. Rotates 360 degrees 324106 JP2HBC25R-L20 With hammer-on beam clamp for 50 352903 JP4UF100-X20 With under floor clamp for use with 10 use with flanges 1/8 in. - 1/4 in. pedestal support 7/8 in. square or thick. Rotates 360 degrees 1 1/8 in. - 1 3/8 in. in diameter 330128 JP2HBC75R-L20 With hammer-on beam clamp for 50 use with flanges 9/16 in. - 3/4 in. thick. Rotates 360 degrees 330129 JP2UF100-L20 With under floor clamp for use with 50 pedestal support 7/8 in. square or 1 1/8 in. - 1 3/8 in. in diameter Some parts available in red. Replace L20 with L2 or X20 with X2 in part number suffix. Some parts available in blue. Replace L20 with L6 or X20 with X6 in part number suffix. Some parts available in white. Replace L20 with L or X20 with X in part number suffix. Request the latest literature and guides from Anixter. 4.166 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Indoor-rated Innerduct Innerduct ./Tech Tips;Innerduct/10674 Innerduct;Plenum/3054 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Plenum Innerduct Tech Tips XXX PR24119V2-174785.eps Selecting Innerduct W Wh ha at t iis s iin nn ne er rd du uc ct t? ? W Wh ha at t iis s iin nn ne er rd du uc ct t? ? Innerduct is a small, flexible, nonmetallic conduit (or tube) typically used to subdivide larger ducts for the placement of optical fiber/communications cables in the underground conduit system (direct bury). Common premise applications include: cables installed in vertical runs between floors or in a shaft (riser); cables installed in environmental air spaces (plenum); or cables installed in horizontal runs (general purpose) and open areas. IIs s iin nn ner erdu duc ct t d diif ff fer ere en nt t t th ha an n du duc ct t o or r c co on ndu duiit t? ? IIs s iin nn ner erdu duc ct t d diif ff fer ere en nt t t th ha an n du duc ct t o or r c co on ndu duiit t? ? Conduit and duct usually refer to a standalone tube, whereas innerduct Plenum innerduct is UL Listed, nonmetallic, corrugated flexible conduit for use in especially in outdoor applications is often used inside another duct or conduit. plenum, riser and general purpose applications. Plenum complies with the UL Larger-diameter products are usually called duct or conduit. Riser, plenum and 2024 Standard for plenum applications. Use plenum fittings. general purpose innerduct are also referred as "flexible raceways." Innerduct, conduit or flexible raceways can be made corrugated to add more flexibility and FEATURES minimize cable damage during pulling, or with solid walls for more resistance in • Sizes 1/2 in. through 2 in. tougher environments. • UL Listed W Wh hy y a ar re e t th her ere e s so o m ma an ny y di dif ff fer eren ent t k kiin nd ds s o of f iin nn ne er rdu duc ct t? ? • Pre-installed pull tape W Wh hy y a ar re e t th her ere e s so o m ma an ny y di dif ff fer eren ent t k kiin nd ds s o of f iin nn ne er rdu duc ct t? ? • Color options: white and orange Different applications have different needs. Burial innerduct needs to be sturdier. Plenum innerduct must be UL Listed, low-smoke and flame-retardant. ORANGE Larger cables need larger innerduct. In some environments, such as trenching, Corrugated orange plenum innerduct with pull tape installed a large duct is preferable to a small one because it is very hard to keep small Anixter No. Description ducts straight in a trench. Make sure that the innerduct you are using fits the 313381 1/2 in. application and complies to local codes and industry standards. 360993 3/4 in. W Wh ha at t iis s p pllen enu um m iin nn ner erd du uc ct t? ? W Wh ha at t iis s p pllen enu um m iin nn ner erd du uc ct t? ? 180524 1 in. A specialized, corrugated, flexible raceway produced from PVDF, polyvinylidene 249416 1 1/4 in. fluoride, a fluoropolymer compound. It's suitable for use in buildings as defined 189547 1 1/2 in. by NEC Articles 725, 770, 800 and 820 and MUST BE UL Listed and labeled for 189571 2 in. plenum applications. W Wh ha at t iis s r riis se er r iin nn ner erdu duc ct t? ? W Wh ha at t iis s r riis se er r iin nn ner erdu duc ct t? ? WHITE A specialized, corrugated, flexible raceway made from PVC resin, with Corrugated white plenum innerduct with pull tape installed fire-resistant characteristics to prevent the carrying of fire from floor to floor. Anixter No. Description MUST BE UL Listed. 394444 1/2 in. W Wh ha at t iis s g gen ener era all p pu ur rp po os se e iin nn ner erdu duc ct t? ? W Wh ha at t iis s g gen ener era all p pu ur rp po os se e iin nn ner erdu duc ct t? ? 377309 3/4 in. A specialized, corrugated, flexible raceway made from PVC resin resistant to the 141127 1 in. spread of fire. MUST BE UL Listed. 140957 1 1/4 in. W Wh ha at t iis s H HD DPE PE? ? W Wh ha at t iis s H HD DPE PE? ? 140958 1 1/2 in. HDPE is the abbreviation for high density polyethylene. This is the material used 173944 2 in. for outdoor innerduct. See the Outside Plant and Building Entrance Protection Products section for a product listing. IIs s HD HDP PE E t th he e s sa am me e a as s PV PVC C? ? IIs s HD HDP PE E t th he e s sa am me e a as s PV PVC C? ? No. PVC becomes brittle when cold and is much less flexible than HDPE. PVC is naturally fire-retardant while HDPE is flammable. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.167 Indoor-rated Innerduct Innerduct Innerduct;Riser/16495 Innerduct;General Purpose/16498 Index1.Support and Supplies//Physical Support Structure//Cable Runway Index1.Support and Supplies//Physical Support Structure//Cable Runway Riser Innerduct General Purpose Innerduct XXX XXX PR24120V2-174786.eps PR24121V2-174791.eps Riser innerduct is UL Listed, nonmetallic, corrugated flexible conduit for use in riser General purpose innerduct is UL Listed, nonmetallic, corrugated flexible conduit for and general purpose applications. Its fire-resistant characteristics prevent the use in general purpose applications. Use riser fittings. spread of fire from floor to floor. Use riser fittings. FEATURES FEATURES • Sizes 1 in. through 2 in. • Sizes 1/2 in. through 2 in. • UL Listed • UL Listed • Pre-installed pull tape • Pre-installed pull tape • Color: orange • Color: orange Anixter No. Description Anixter No. Description 217241 1 in. 394446 1/2 in. 217242 1 1/4 in. 394447 3/4 in. 217244 1 1/2 in. 201765 1 in. 217245 2 in. 201766 1 1/4 in. D 273727 1 1/2 in. 239843 2 in. 394448 3 in. Request the latest literature and guides from Anixter. 4.168 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Indoor-rated Innerduct Fittings ./Innerduct;Couplings and Adapters/16499 Index1.Support and Supplies//Physical Support Structure//Cable Runway ADAPTERS - WHITE Plenum Fittings Anixter No. Vendor No. Description 399080 PFTTP0500W 1/2 in. EASTERN WIRE + CONDUIT 271027 PFTTP0750W 3/4 in. Eastern Wire + Conduit offers a wide range of fittings that complement the 271028 PFTTP1000W 1 in. innerduct line to provide you with an outstanding overall package. These fittings are 271030 PFTTP1250W 1 1/4 in. easy to use and make installation a simple task. 271031 PFTTP1500W 1 1/2 in. COUPLINGS - ORANGE PR24122V2-174795.eps 332681 PFTTP2000W 2 in. Eastern Wire + Conduit's fittings are compatible and approved for use with our stock of plenum innerduct. Innerduct;Couplings and Adapters/16500 Index1.Support and Supplies//Physical Support Structure//Cable Runway Riser and General Purpose Fittings EASTERN WIRE + CONDUIT Anixter No. Vendor No. Description Eastern Wire + Conduit offers a wide range of fittings that complement the 399086 PFCSP0500O 1/2 in. innerduct line to provide you with an outstanding overall package. These fittings are 399087 PFCSP0750O 3/4 in. easy to use and make installation a simple task. 399088 PFCSP1000O 1 in. COUPLINGS - ORANGE PR24122V2-174795.eps 399089 PFCSP1250O 1 1/4 in. 399090 PFCSP1500O 1 1/2 in. 399091 PFCSP2000O 2 in. COUPLINGS - WHITE Anixter No. Vendor No. Description 399074 PFCSP0500W 1/2 in. 271022 PFCSP0750W 3/4 in. Anixter No. Vendor No. Description 271023 PFCSP1000W 1 in. 399098 PFCSR0500O 1/2 in. 271024 PFCSP1250W 1 1/4 in. 399099 PFCSR0750O 3/4 in. 271026 PFCSP1500W 1 1/2 in. 399100 PFCSR1000O 1 in. 332680 PFCSP2000W 2 in. 399101 PFCSR1250O 1 1/4 in. ADAPTERS - ORANGE PR24123V2-174790.eps 399102 PFCSR1500O 1 1/2 in. 399103 PFCSR2000O 2 in. ADAPTERS - ORANGE PR24123V2-174790.eps Anixter No. Vendor No. Description 399092 PFTTP0500O 1/2 in. 399093 PFTTP0750O 3/4 in. 399094 PFTTP1000O 1 in. Anixter No. Vendor No. Description 399095 PFTTP1250O 1 1/4 in. 399104 PFTTR0500O 1/2 in. 399096 PFTTP1500O 1 1/2 in. 399105 PFTTR0750O 3/4 in. 399097 PFTTP2000O 2 in. 399106 PFTTR1000O 1 in. 399107 PFTTR1250O 1 1/4 in. 399108 PFTTR1500O 1 1/2 in. 399109 PFTTR2000O 2 in. Eastern Wire +Conduit's fittings are compatible and approved for use with our stock of riser and general purpose innerduct. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.169 Indoor-rated Innerduct Fittings Innerduct;Couplings and Adapters/16501 Innerduct;Couplings and Adapters/16502 Index1.Support and Supplies//Physical Support Structure//Cable Runway Index1.Support and Supplies//Physical Support Structure//Cable Runway Plenum Fittings Riser Fittings IPEX INC IPEX INC IPEX fittings make terminating or coupling quick and easy, and six locking tabs IPEX fittings make terminating or coupling quick and easy, and six locking tabs ensure the fittings stay connected. No messy cementing or screws to tighten. ensure the fittings stay connected. No messy cementing or screws to tighten. COUPLINGS - ORANGE PR24126V2-175290.eps COUPLINGS - ORANGE PR24128V2-175296.eps Anixter No. Vendor No. Description Anixter No. Vendor No. Description 399110 KPPC075 3/4 in. 399120 KPRC075 3/4 in. 399111 KPPC100 1 in. 399121 KPRC100 1 in. 399112 KPPC125 1 1/4 in. 399122 KPRC125 1 1/4 in. 399113 KPPC150 1 1/2 in. 399123 KPRC150 1 1/2 in. 399114 KPPC200 2 in. 399124 KPRC200 2 in. ADAPTERS - ORANGE PR24125V2-175287.eps ADAPTERS - ORANGE PR24127V2-175293.eps D Anixter No. Vendor No. Description Anixter No. Vendor No. Description 399115 KPTA075 3/4 in. 399125 KRTA075 3/4 in. 399116 KPTA100 1 in. 399126 KRTA100 1 in. 399117 KPTA125 1 1/4 in. 399127 KRTA125 1 1/4 in. 399118 KPTA150 1 1/2 in. 399128 KRTA150 1 1/2 in. 399119 KPTA200 2 in. 399129 KRTA200 2 in. IPEX fittings are compatible and approved for use with IPEX fittings are compatible and approved for use with our stock of plenum innerduct. our stock of riser innerduct. Request the latest literature and guides from Anixter. 4.170 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Indoor-rated Innerduct Textile Innerduct ./Innerduct;Textile/13090 Index1.Support and Supplies//Physical Support Structure//Cable Runway Anixter No. Vendor No. Description MaxCell Textile Innerduct 312600 MXC2003YL5300 Standard, 2 in., 3-cell, 5,300-9,999 ft. reel, yellow MAXCELL GROUP PR20491V2-77411.eps 375631 MXC2003YL10000 Standard, 2 in., 3-cell, 10,000 ft. reel, yellow 375632 MXC4003GR250 Standard, 4 in., 3-cell, 250 ft. reel, green 375633 MXC4003GR500 Standard, 4 in., 3-cell, 500 ft. reel, green 312613 MXC4003GR1000 Standard, 4 in., 3-cell, 1,000-2,649 ft. reel, green 345913 MXC4003GR2650 Standard, 4 in., 3-cell, 2,650-5,299 ft. reel, green 375634 MXC4003GR5300 Standard, 4 in., 3-cell, 5,300-9,999 ft. reel, green MaxCell is the only flexible, multicelled, textile innerduct specifically designed for the 348562 MXC4003GR10000 Standard, 4 in., 3-cell, 10,000 ft. network construction industry. The unique textile construction allows MaxCell to reel, green conform to the shape of cables placed within, greatly reducing the wasted space 375635 MXC2001WH250 Standard, 2 in., 1-cell, 250 ft. reel, white associated with rigid innerduct. It is available in multiple configurations and lengths. 375636 MXC2001WH500 Standard, 2 in., 1-cell, 500 ft. reel, white MaxCell textile innerduct can reduce labor costs by 33 percent and improve your 375637 MXC2001WH1000 Standard, 2 in., 1-cell, 1,000-2,649 ft. bottom line. MaxCell maximizes conduit space, minimizes costs and allows for overlay reel, white installations without breaking ground. MaxCell's flexibility allows for installation over 375638 MXC2001WH2650 Standard, 2 in., 1-cell, 2,650-5,299 ft. existing cables - saving on costly construction and labor costs. reel, white 375639 MXC2001WH5300 Standard, 2 in., 1-cell, 5,300-9,999 ft. STANDARD PRODUCT LINE reel, white The standard MaxCell product is a versatile solution for the complex problems faced by engineers, contractors and network providers. Manufactured from internally 375640 MXC2001WH10000 Standard, 2 in., 1-cell, 10,000 ft. produced monofilaments, this model yields superior performance over existing reel, white rigid innerduct. DETECTABLE PRODUCT LINE Anixter No. Vendor No. Description Detectable MaxCell is configured like the standard product, but contains an 312606 MXC3456BK250 Standard, 3 in., 3-cell, 250 ft. reel, black 18 gauge solid copper core tracer wire inserted in the edge for use in underground 312599 MXC3456BK500 Standard, 3 in., 3-cell, 500 ft. reel, black utility locations. An embedded feature, detectable MaxCell will not entangle or 312596 MXC3456BK1000 Standard, 3 in., 3-cell, 1,000-2,649 ft. impede cable installation nor increase cable pulling tensions. The wire is permanent and will not be removed as is the case with detectable pulling tapes. In addition, the reel, black wire is protected which means no damage to it or the cables and ensuring locate 312593 MXC3456BK2650 Standard, 3 in., 3-cell, 2,650-5,299 ft. ability for years to come. reel, black Anixter No. Vendor No. Description 312601 MXC3456BK5300 Standard, 3 in., 3-cell, 5,300-9,999 ft. 375641 MXD3456BK250 Detectable, 3 in., 3-cell, 250 ft. reel, black reel, black 375626 MXC3456BK10000 Standard, 3 in., 3-cell, 10,000 ft. 375642 MXD3456BK500 Detectable, 3 in., 3-cell, 500 ft. reel, black reel, black 312616 MXC2002PR250 Standard, 2 in., 2-cell, 250 ft. reel, purple 375643 MXD3456BK1000 Detectable, 3 in., 3-cell, 1,000-2,649 ft. 312615 MXC2002PR500 Standard, 2 in., 2-cell, 500 ft. reel, purple reel, black 312614 MXC2002PR1000 Standard, 2 in., 2-cell, 1,000-2,649 ft. 375644 MXD3456BK2650 Detectable, 3 in., 3-cell, 2,650-5,299 ft. reel, purple reel, black 375627 MXC2002PR2650 Standard, 2 in., 2-cell, 2,650-5,299 ft. 375645 MXD3456BK5300 Detectable, 3 in., 3-cell, 5,300-9,999 ft. reel, purple reel, black 375628 MXC2002PR5300 Standard, 2 in., 2-cell, 5,300-9,999 ft. 375646 MXD3456BK10000 Detectable, 3 in., 3-cell, 10,000 ft. reel, purple reel, black 375629 MXC2002PR10000 Standard, 2 in., 2-cell, 10,000 ft. 375647 MXD2002PR250 Detectable, 2 in., 2-cell, 250 ft. reel, purple reel, purple 312612 MXC2003YL250 Standard, 2 in., 3-cell, 250 ft. reel, yellow 375648 MXD2002PR500 Detectable, 2 in., 2-cell, 500 ft. 312611 MXC2003YL500 Standard, 2 in., 3-cell, 500 ft. reel, yellow reel, purple 312610 MXC2003YL1000 Standard, 2 in., 3-cell, 1,000-2,649 ft. 375649 MXD2002PR1000 Detectable, 2 in., 2-cell, 1,000-2,649 ft. reel, yellow reel, purple 312609 MXC2003YL2650 Standard, 2 in., 3-cell, 2,650-5,299 ft. 375650 MXD2002PR2650 Detectable, 2 in., 2-cell, 2,650-5,299 ft. reel, yellow reel, purple Continued on next page >> Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.171 Indoor-rated Innerduct Textile Innerduct (continued) MaxCell Textile Innerduct Anixter No. Vendor No. Description 375674 MXP3456BK2650 Plenum, 3 in., 3-cell, 2,650-5,299 ft. Anixter No. Vendor No. Description reel, black 375651 MXD2002PR5300 Detectable, 2 in., 2-cell, 5,300-9,999 ft. 375675 MXP3456BK5300 Plenum, 3 in., 3-cell, 5,300-9,999 ft. reel, purple reel, black 375652 MXD2002PR10000 Detectable, 2 in., 2-cell, 10,000 ft. 375676 MXP3456BK10000 Plenum, 3 in., 3-cell, 10,000 ft. reel, purple reel, black 375653 MXD2003YL250 Detectable, 2 in., 3-cell, 250 ft. 375677 MXP2002PR250 Plenum, 2 in., 2-cell, 250 ft. reel, purple reel, yellow 375678 MXP2002PR500 Plenum, 2 in., 2-cell, 500 ft. reel, purple 375654 MXD2003YL500 Detectable, 2 in., 3-cell, 500 ft. 375679 MXP2002PR1000 Plenum, 2 in., 2-cell, 1,000-2,649 ft. reel, yellow reel, purple 375655 MXD2003YL1000 Detectable, 2 in., 3-cell, 1,000-2,649 ft. 375680 MXP2002PR2650 Plenum, 2 in., 2-cell, 2,650-5,299 ft. reel, yellow reel, purple 375656 MXD2003YL2650 Detectable, 2 in., 3-cell, 2,650-5,299 ft. 375681 MXP2002PR5300 Plenum, 2 in., 2-cell, 5,300-9,999 ft. reel, yellow reel, purple 375657 MXD2003YL5300 Detectable, 2 in., 3-cell, 5,300-9,999 ft. 375682 MXP2002PR10000 Plenum, 2 in., 2-cell, 10,000 ft. reel, yellow reel, purple 375658 MXD2003YL10000 Detectable, 2 in., 3-cell, 10,000 ft. 375683 MXP2003YL250 Plenum, 2 in., 3-cell, 250 ft. reel, yellow reel, yellow 375684 MXP2003YL500 Plenum, 2 in., 3-cell, 500 ft. reel, yellow 375659 MXD4003GR250 Detectable, 4 in., 3-cell, 250 ft. reel, green 375685 MXP2003YL1000 Plenum, 2 in., 3-cell, 1,000-2,649 ft. reel, yellow 375660 MXD4003GR500 Detectable, 4 in., 3-cell, 500 ft. reel, green 375686 MXP2003YL2650 Plenum, 2 in., 3-cell, 2,650-5,299 ft. reel, yellow 375661 MXD4003GR1000 Detectable, 4 in., 3-cell, 1,000-2,649 ft. reel, green 375687 MXP2003YL5300 Plenum, 2 in., 3-cell, 5,300-9,999 ft. reel, yellow 375662 MXD4003GR2650 Detectable, 4 in., 3-cell, 2,650-5,299 ft. reel, green 375688 MXP2003YL10000 Plenum, 2 in., 3-cell, 10,000 ft. D reel, yellow 375663 MXD4003GR5300 Detectable, 4 in., 3-cell, 5,300-9,999 ft. reel, green 375689 MXP4003GR250 Plenum, 4 in., 3-cell, 250 ft. reel, green 375664 MXD4003GR10000 Detectable, 4 in., 3-cell, 10,000 ft. 375690 MXP4003GR500 Plenum, 4 in., 3-cell, 500 ft. reel, green reel, green 375691 MXP4003GR1000 Plenum, 4 in., 3-cell, 1,000-2,649 ft. 375665 MXD2001WH250 Detectable, 2 in., 1-cell, 250 ft. reel, green reel, white 375692 MXP4003GR2650 Plenum, 4 in., 3-cell, 2,650-5,299 ft. 375666 MXD2001WH500 Detectable, 2 in., 1-cell, 500 ft. reel, green reel, white 375693 MXP4003GR5300 Plenum, 4 in., 3-cell, 5,300-9,999 ft. 375667 MXD2001WH1000 Detectable, 2 in., 1-cell, 1,000-2,649 ft. reel, green reel, white 375694 MXP4003GR10000 Plenum, 4 in., 3-cell, 10,000 ft. 375668 MXD2001WH2650 Detectable, 2 in., 1-cell, 2,650-5,299 ft. reel, green reel, white 375695 MXP2001WH250 Plenum, 2 in., 1-cell, 250 ft. reel, white 375669 MXD2001WH5300 Detectable, 2 in., 1-cell, 5,300-9,999 ft. 375696 MXP2001WH500 Plenum, 2 in., 1-cell, 500 ft. reel, white reel, white 375697 MXP2001WH1000 Plenum, 2 in., 1-cell, 1,000-2,649 ft. 375670 MXD2001WH10000 Detectable, 2 in., 1-cell, 10,000 ft. reel, white reel, white 375698 MXP2001WH2650 Plenum, 2 in., 1-cell, 2,650-5,299 ft. reel, white PLENUM AND RISER MAXCELL PRODUCT LINES 375699 MXP2001WH5300 Plenum, 2 in., 1-cell, 5,300-9,999 ft. The plenum- and riser-rated products are low smoke zero halogen versions for use in reel, white premise wiring. These products provide numerous low-friction pathways for 375700 MXP2001WH10000 Plenum, 2 in., 1-cell, 10,000 ft. installation of multiple cables in a variety of building environments including air handling space, raised floors, cable trays and riser ducts. Plenum- and riser-rated reel, white MaxCell allow for incremental deployment of cables as needed, as well as easy 375701 MXR3456BK250 Riser, 3 in., 3-cell, 250 ft. reel, black removal of obsolete and abandoned cables. 375702 MXR3456BK500 Riser, 3 in., 3-cell, 500 ft. reel, black Anixter No. Vendor No. Description 375703 MXR3456BK1000 Riser, 3 in., 3-cell, 1,000-2,649 ft. 375671 MXP3456BK250 Plenum, 3 in., 3-cell, 250 ft. reel, black reel, black 375672 MXP3456BK500 Plenum, 3 in., 3-cell, 500 ft. reel, black 375704 MXR3456BK2650 Riser, 3 in., 3-cell, 2,650-5,299 ft. 375673 MXP3456BK1000 Plenum, 3 in., 3-cell, 1,000-2,649 ft. reel, black reel, black Request the latest literature and guides from Anixter. 4.172 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Indoor-rated Innerduct Textile Innerduct MAXCELL ACCESSORIES Anixter No. Vendor No. Description 375705 MXR3456BK5300 Riser, 3 in., 3-cell, 5,300-9,999 ft. Anixter No. Vendor No. Description reel, black 312617 MXC2CH MaxCell installation kit, 2-way harness 375706 MXR3456BK10000 Riser, 3 in., 3-cell, 10,000 ft. reel, black 312618 MXC3CH MaxCell installation kit, 3-way harness 375707 MXR2002RR250 Riser, 2 in., 2-cell, 250 ft. reel, purple 312619 MXCIGC MaxCell C02 gas cartridge 375708 MXR2002RR500 Riser, 2 in., 2-cell, 500 ft. reel, purple 312620 MXCIK11 MaxCell single-pack pull swivel 375709 MXR2002RR1000 Riser, 2 in., 2-cell, 1,000-2,649 ft. 312621 MXCIK21 MaxCell 2-pack pulls/harness swivels reel, purple 312622 MXCIK31CH MaxCell 3-pack pulls/harness swivels 375710 MXR2002RR2650 Riser, 2 in., 2-cell, 2,650-5,299 ft. 312623 MXCITB3 MaxCell inflatable bag termination for reel, purple 3 in. OD conduit 375711 MXR2002RR5300 Riser, 2 in., 2-cell, 5,300-9,999 ft. 312624 MXCITB4 MaxCell inflatable bag termination for reel, purple 4 in. OD conduit 375712 MXR2002RR10000 Riser, 2 in., 2-cell, 10,000 ft. reel, purple 312625 MXCITB5 MaxCell inflatable bag termination for 375713 MXR2003YL250 Riser, 2 in., 3-cell, 250 ft. reel, yellow 5 in. OD conduit 375714 MXR2003YL500 Riser, 2 in., 3-cell, 500 ft. reel, yellow 312626 MXCITB6 MaxCell inflatable bag termination for 375715 MXR2003YL1000 Riser, 2 in., 3-cell, 1,000-2,649 ft. 6 in. OD conduit reel, yellow 312627 MXCITT MaxCell inflation tool. Requires MaxCell 375716 MXR2003YL2650 Riser, 2 in., 3-cell, 2,650-5,299 ft. MXCIGC gas cartridge reel, yellow 312628 MXCSW MaxCell installation swivel 375717 MXR2003YL5300 Riser, 2 in., 3-cell, 5,300-9,999 ft. 312629 MXCTBSET070 MaxCell watertight bushing set for reel, yellow 0.7 in. hole 375718 MXR2003YL10000 Riser, 2 in., 3-cell, 10,000 ft. reel, yellow 312630 MXCTBSET090 MaxCell watertight bushing set for 375719 MXR4003GR250 Riser, 4 in., 3-cell, 250 ft. reel, green 0.9 in. hole 375720 MXR4003GR500 Riser, 4 in., 3-cell, 500 ft. reel, green 312631 MXCTBSET110 MaxCell watertight bushing set for 1.1 in. hole 375721 MXR4003GR1000 Riser, 4 in., 3-cell, 1,000-2,649 ft. reel, green 312632 MXCTP4 MaxCell watertight split plug for 4 in. duct 375722 MXR4003GR2650 Riser, 4 in., 3-cell, 2,650-5,299 ft. 312633 MXCTP6 MaxCell watertight split plug for 6 in. duct reel, green The standard, detectable, plenum and riser 3 in., 3-cell products are also 375723 MXR4003GR5300 Riser, 4 in., 3-cell, 5,300-9,999 ft. available in red and blue. All product lines offer the choice of a custom color reel, green as well. For more information contact your local sales representative. 375724 MXR4003GR10000 Riser, 4 in., 3-cell, 10,000 ft. reel, green 375725 MXR2001WH250 Riser, 2 in., 1-cell, 250 ft. reel, white 375726 MXR2001WH500 Riser, 2 in., 1-cell, 500 ft. reel, white 375727 MXR2001WH1000 Riser, 2 in., 1-cell, 1,000-2,649 ft. reel, white 375728 MXR2001WH2650 Riser, 2 in., 1-cell, 2,650-5,299 ft. reel, white 375729 MXR2001WH5300 Riser, 2 in., 1-cell, 5,300-9,999 ft. reel, white 375730 MXR2001WH10000 Riser, 2 in., 1-cell, 10,000 ft. reel, white Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.173 Grounding and Bonding Why Ground? ./Tech Tips;Grounding/12372 Index1.Support and Supplies//Physical Support Structure//Accessories XXX Tech Tips W W W Wh h h hy y y y G G G Gr r r ro o o ou u u un n n nd d d d? ? ? ? The grounding system is not just an insurance policy against a lightning strike. It is an active, functioning system that provides protection for personnel and equipment. Proper grounding is essential for efficient network system performance. The purpose of the grounding system is to create a low-impedance path to earth ground for electrical surges and transient voltages. Lightning, fault currents, circuit switching (motors turning on and off) and electrostatic discharge are the common causes of these surges and transient voltages. An effective grounding system minimizes the detrimental effects of these electrical surges. D Request the latest literature and guides from Anixter. 4.174 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Grounding and Bonding Chatsworth Products, Inc. (CPI) ./Grounding;Racks and Cabinets/2284 Grounding;Racks and Cabinets/17879 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Grounding Busbars Two Mounting Hole Ground Terminal Block CHATSWORTH PRODUCTS INC (CPI) PR20305V2-71456.eps CHATSWORTH PRODUCTS INC (CPI) PR34418V2-254396.eps Create a permanent ground reference point for racks, cabinets, cable runway, Attach ground wires to racks and cabinets. equipment and protectors within each telecommunications facility. CPI offers a full FEATURES line of grounding and bonding products including rack-mount busbars, compression • Accepts conductors ranging from #14 AWG through 2/0 lugs, C-taps, antioxidant, etc. Contact sales for additional products. • Attaches to rack or cabinet equipment mounting rails with mounting holes FEATURES spaced on 5/8 in. centers • Busbars include standoff mounting brackets and insulators • Mounting holes are .28 in. in diameter; mounting hardware not included • Busbars support attachment of 2-hole lugs • Manufactured from electroplated tin aluminum extrusion • TMGB busbars are 4 in. high, used in entrance facility Anixter No. Vendor No. Description • TGB busbars are 2 in. high, used in other facilities 288053 40167-001 One each • Busbars ship assembled in a single carton 288053-10PK 40167-010 Pack of 10 • 2-hole compression lugs are included with each kit • Other lengths and lug-hole patterns are available CPI offers a full line of grounding and bonding products including rack-mount busbars, compression lugs, C-taps, pipe and Anixter No. Vendor No. Description pedestal clamps, jumpers, antioxidant, etc. 267419 40156-012 TGB busbar kit, 9-position, 12 in. L, Contact your sales representative for additional products. includes 10 lugs 267421 40158-012 TMGB busbar kit, 18-position, 12 in. L, includes 11 lugs 267422 40158-020 TMGB busbar kit, 30-position, 20 in. L, includes 11 lugs Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.175 Grounding and Bonding ERICO ./Grounding;Racks and Cabinets/17554 Grounding;Racks and Cabinets/17557 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Copper-bonded Pointed Ground Rods Silicon Bronze Standard-duty Ground Rod Clamp ERICO PR29167V2-215865.eps ERICO PR29168V2-215872.eps Ground rod clamps from ERICO provide a cost-effective method for connecting conductors to ground rods or rebar. The CP58 clamps are designed to withstand a minimum torque of 300 in.-lb. The CP58 ground rod clamps are UL and CSA Listed for Copper-bonded pointed ground rods from ERICO are manufactured of high-strength 1/2 in. and 5/8 in. ground rods and #4 rebar. The CP58 clamps are designed to 1035 cold drawn steel through a state-of-the-art process which ensures uniform accept a conductor range from #10 solid to #2 stranded. The CP58 is also UL and plating thickness. Copper-bonded pointed ground rods resist corrosion better than CSA Listed for direct burial. galvanized rods, which allows for a 30-year service life in most soils. FEATURES FEATURES • Manufactured from high-strength bronze alloy • Copper is molecularly bonded to nickel-sealed high-strength steel cores • Durable; long lasting • Average tensile strength of 80,000 psi and straightness tolerance of .010 in. • Exceeds UL torque requirement by two times per linear foot • UL and CSA Listed for direct burial • Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1 • Made in USA Anixter No. Vendor No. Description • UL Listed for #4 rebar 425774 615880 5/8 in. diameter x 8 ft. L, 10 ml. copper Anixter No. Vendor No. Description plating thickness 263253 CP58 Silicon bronze ground rod clamp, 263254 615883 5/8 in. diameter x 8 ft. L, 13 ml. copper D standard duty, 1/2 in. to 5/8 in. rod, plating thickness #10 solid to #2 stranded AWG Grounding;Racks and Cabinets/17555 Index1.Support and Supplies//Physical Support Structure//Accessories Grounding;Racks and Cabinets/17558 Index1.Support and Supplies//Physical Support Structure//Accessories Galvanized Pointed Ground Rods Silicon Bronze Heavy-duty Ground Rod Clamp ERICO PR29171V2-215868.eps ERICO PR29172V2-215863.eps Ground rod clamps from ERICO provide a cost-effective method for connecting Galvanized steel. conductors to ground rods or rebar. The HDC series is designed to withstand a minimum torque of 450 in.-lb. Anixter No. Vendor No. Description 425785 815880 5/8 in. diameter x 8 ft. L FEATURES • Manufactured from high-strength bronze alloy • Durable; long lasting • Stands up to over tightening • UL and CSA Listed for direct burial Anixter No. Vendor No. Description 425793 HDC12 Silicon bronze ground rod clamp, heavy-duty, 1/2 in. rod, #10 solid to #2 stranded AWG Request the latest literature and guides from Anixter. 4.176 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Grounding and Bonding ERICO Grounding;Racks and Cabinets/17559 Index1.Support and Supplies//Physical Support Structure//Accessories Anixter No. Vendor No. Description Ground Bars 255807 TMGB-A20L27PT TMGB series telecom ground bar (insulator and bracket), 1/4 in. thick x ERICO PR29169V2-215864.eps 4 in. W x 20 in. L, tinned 425804 B548A41 Mounting kit for 1 in. and 2 in. wide bars, SS hardware and 3/8 in. fasteners, insulator and bracket Proper bonding is essential to create an equipotential plane between service grounds and equipment during fault and transient conditions. This equipotential plane provides a near zero voltage differential and serves to protect people and equipment during these events. The most popular bonding product in use today is the ground bar or bonding bar. FEATURES • Provide a convenient, single-point grounding and bonding location Anixter No. Vendor No. Description 425794 EGBA14210JJ EGB series ground bar (insulator and bracket), 1/4 in. thick x 2 in. W x 10 in. L; hole pattern JJ: two rows of 7/16 in. holes with 1 in. spacing 425796 EGBA14212HH EGB series ground bar (insulator and bracket), 1/4 in. thick x 2 in. W x 12 in. L; hole pattern HH: one row of 7/16 in. holes with 1 in. spacing 425797 EGBA14212TES EGB series ground bar (insulator and bracket), 1/4 in. thick x 2 in. W x 12 in. L; hole pattern GG: two rows of 7/16 in. holes with 1 in. spacing and one pair of 5/16 in. holes (3/4 in. space) on either end 255804 TGB-A14L06PT TGB series telecom ground bar (insulator and bracket), 1/4 in. thick x 2 in. W x 13 1/4 in. L, tinned 255803 TGB-A18L10PT TGB series telecom ground bar (insulator and bracket), 1/4 in. thick x 2 in. W x 17 3/4 in. L, tinned 255802 TGB-A20L12PT TGB series telecom ground bar (insulator and bracket), 1/4 in. thick x 2 in. W x 20 in. L, tinned 255801 TGB-A25L14PT TGB series telecom ground bar (insulator and bracket), 1/4 in. thick x 2 in. W x 24 1/2 in. L, tinned 255810 TMGB-A14L15PT TMGB series telecom ground bar (insulator and bracket), 1/4 in. thick x 4 in. W x 13 1/4 in. L, tinned 255809 TMGB-A16L19PT TMGB series telecom ground bar (insulator and bracket), 1/4 in. thick x 4 in. W x 15 1/2 in. L, tinned Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.177 Grounding and Bonding Ortronics ./Grounding;Racks and Cabinets/15582 Index1.Support and Supplies//Physical Support Structure//Accessories TELECOMMUNICATIONS GROUND BARS Bonding and Grounding Anixter No. Vendor No. Description 400743 GB2X10TMGB Bar size: 10 in. W x 2 in. H with (4) ORTRONICS PR22653V2-137915.eps 5/16 in. hole sets and (3) 7/16 in. hole sets 400744 GB2X12TMGB Bar size: 12 in. W x 2 in. H with (6) 5/16 in. hole sets and (3) 7/16 in. hole sets STANDARD GROUND BARS PR22654V2-137917.eps Manufactured of 1/4 in. thick electrolytic tough pitch 110 alloy copper bar. Includes 1 1/2 in. insulators and 1 in. off-set stainless steel mounting brackets. Includes one 1/2 oz. tube of antioxidant joint compound. Meets BICSI and ANSI/TIA 607 standards. FEATURES • Kits include: -One copper ground bar with brackets and insulators Anixter No. Vendor No. Description -Six #6 compression lugs 378666 GB4X12J Bar size: 12 in. W x 4 in. H with 27 holes -Three #2 compression lugs 378667 GB4X20J Bar size: 20 in. W x 4 in. H with 51 holes -One 2/0 compression lug -One 4/0 compression lug WALL MOUNTING BRACKET KIT -Twelve 1/4 in. - 20 x 3/4 in. SS hex head cap screw Anixter No. Vendor No. Description -Twelve 1/4 in. - 20 SS lock washer 400757 GBWMBKIT Set of two brackets with insulators and -Twelve 1/4 in. - 20 SS hex nut D hardware to mount to a ground bar -Six 3/8 in. - 16 x 1 in. SS hex head cap screw -Six 3/8 in. - 16 SS lock washer Grounding;Racks and Cabinets/17575 Index1.Support and Supplies//Physical Support Structure//Accessories -Six 3/8 in. - 16 SS hex nut Vertical Ground Bar Kits TELECOMMUNICATIONS MAIN GROUND BAR KITS ORTRONICS PR29323V2-217527.eps Anixter No. Vendor No. Description 400735 GB4X12TMGBKIT Bar size: 12 in. W x 4 in. H with (12) 5/16 in. hole sets and (6) 7/16 in. hole sets 400738 GB4X20TMGBKIT Bar size: 20 in. W x 4 in. H with (24) 5/16 in. hole sets and (6) 7/16 in. hole sets Manufactured of 1/4 in. thick electrolytic tough pitch 110 copper alloy bar. TELECOMMUNICATIONS GROUND BAR KIT Accommodates one-hole lugs or two-hole lugs (5/8 in. on center). 36 in. bar has two Anixter No. Vendor No. Description PEM studs at one end and the 72 in. bar has two PEM studs at both ends for ground 400745 GB2X12TGBKIT Bar size: 12 in. W x 2 in. H with (6) conductor connection. 5/16 in. hole sets and (3) 7/16 in. Kit includes: hole sets - Eight 1/4 in. x 1/2 in. stainless steel hex head cap screws TELECOMMUNICATIONS MAIN GROUND BARS - Three white delrin insulators Anixter No. Vendor No. Description - Four 5/16 in. stainless steel lock washers 378664 GB4X12TMGB Bar size: 12 in. W x 4 in. H with (12) - Eight 1/4 in. stainless steel lock washers 5/16 in. hole sets and (6) 7/16 in. - Three #12-24 x 5/8 in. hex washer head screws hole sets - Four 5/16 in. stainless steel hex nuts 378665 GB4X20TMGB Bar size: 20 in. W x 4 in. H with (24) - One two-hole long barrel compression lug 5/16 in. hole sets and (6) 7/16 in. Anixter No. Vendor No. Description hole sets 426006 GBV36KIT 5/8 in. x 36 in. vertical kit 426009 GBV72KIT 5/8 in. x 72 in. vertical kit Request the latest literature and guides from Anixter. 4.178 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Grounding and Bonding Ortronics Grounding;Racks and Cabinets/17576 Index1.Support and Supplies//Physical Support Structure//Accessories Horizontal Ground Bar Kit ORTRONICS PR29324V2-217522.eps Kit includes: - One 1/4 in. thick electrolytic tough pitch 110 copper alloy bar - One 3 in. bar splice plate with two slotted holes - Two white delrin insulators - Two #12-24 x 5/8 in. hex washer head screws - Two #12-24 x 3/4 in. copper flashed brass screws - Two #12 copper flat washers - Eight #6-32 x 1/4 in. copper flashed brass screws - Eight #6 ring terminals Anixter No. Vendor No. Description 378311 GBH19KIT 1 in. x 19.25 in. horizontal kit Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.179 Grounding and Bonding PANDUIT ./Grounding;Racks and Cabinets/12366 Grounding;Racks and Cabinets/12367 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories STRUCTUREDGROUND Grounding Strip Kits STRUCTUREDGROUND Common Bonding Network (CBN) Jumper Kit PANDUIT PR12092V2-21976.eps PANDUIT PR12093V2-21979.eps 78.65 in. (2 m) length; 0.67 in. (17 mm) width; 0.05 in. (1.27 mm) thickness. FEATURES • Bonds the rack or cabinet to the MCBN FEATURES • HTAPs, included in kits, requires crimping tool and die • Bonds up to 45RU per rack • HTAPs are UL Listed and CSA Certified for applications up to 600 V when • EIA Universal mounting hole pattern crimped with PANDUIT and specified competitor crimping tools and PANDUIT • Engineered to comply with U.S. and international grounding requirements crimping dies Anixter No. Vendor No. Description • Engineered to comply with U.S. and international grounding requirements 306469 RGS134-1Y Grounding strip provided with 0.16 oz Anixter No. Vendor No. Description (5 cc) of antioxidant, one grounding 2 351963 RGCBNJ660P22 #6 AWG (16mm ) jumper; 60 in. sticker and three each #12-24 x 1/2 in., (1.52 m) length; 45° bent lug on M6 x 12 mm grounding strip side; provided with 306837 RGS134-10-1Y 10 grounding strips provided with 0.16 oz 0.16 oz (5 cc) of antioxidant, two each (5 cc) of antioxidant, 10 grounding #12-24 x 1/2 in., M6 x 12 mm, stickers and 30 each #12-24 x 1/2 in. D #10-32 x 1/2 in. and M5 x 12 mm and M6 x 12 mm thread-forming screws thread-forming screws and a copper compression HTAP for connecting to the MCBN in sizes ranging from #6 to 2 #2 AWG (16 to 25 mm ) 306470 RGCBNJ660PY #6 AWG (16 mm) jumper; 60 in. (1.52 m) length; 45° bent lug on grounding strip side; provided with 0.16 oz (5 cc) of antioxidant, two each #12-24 x 1/2 in., M6 x 12mm, #10-32 x 1/2 in. and M5 x 12 mm thread-forming screws and a copper compression HTAP for connecting to the MCBN in sizes ranging from #2 AWG to 250 kcmil (35 to 120 mm) Request the latest literature and guides from Anixter. 4.180 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Grounding and Bonding PANDUIT Grounding;Racks and Cabinets/12368 Grounding;Racks and Cabinets/17511 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories STRUCTUREDGROUND Equipment Jumper Kits Telecommunications Equipment Bonding Conductor (TEBC) Kits PANDUIT PR20045V2-67682.eps PANDUIT PR29176V2-215809.eps FEATURES FEATURES • Bonds network equipment to grounding strip or grounding busbar • Bonds the rack or cabinet to the Telecommunications Grounding Busbar • Jumper kit available with both ends factory-terminated to provide a • Jumper kit available with both ends factory terminated to provide a bolt-on solution bolt-on solution • Jumper kit available with one end factory-terminated to attach to the grounding • #6 AWG jumper green wire with yellow horizontal stripe strip or grounding busbar; free end accommodates unique • Preterminated with 45° bent lug on rack side and preterminated with straight equipment terminations tongue lug on BICSI/J-STD-607-A Telecommunications Grounding Busbar side • Use jumpers with 90° bent lug, on grounding strip side, for high-density • Engineered to comply with U.S. and international grounding requirements grounding requirements up to one ground point per RU Anixter No. Vendor No. Description • Use jumpers with 45° bent lugs, on grounding strip side, for improved 425141 GJ672UH 72 in. (1.83 m) length; #6 AWG green cable management wire with yellow horizontal • Use 24 in. jumpers when network equipment ground point is located near the stripe; preterminated grounding strip side of the rack or cabinet 425144 GJ696UH 96 in. (2.44 m) length; #6 AWG green • Use 36 in. jumpers when network equipment ground point is located away from wire with yellow horizontal the grounding strip side of the rack stripe; preterminated • Engineered to comply with U.S. and international grounding requirements 425145 GJ6120UH 120 in. (3.05 m) length; #6 AWG green Anixter No. Vendor No. Description wire with yellow horizontal 2 306472 RGEJ636PFY #6 AWG (16 mm ) jumper 36 in. stripe; preterminated (0.91 m) length; factory terminated with 425146 GJ6144UH 144 in. (3.66 m) length; #6 AWG green 90° bent lug on grounding strip side to wire with yellow horizontal straight lug on equipment; provided with stripe; preterminated 0.16 oz (5 cc) of antioxidant and two each 425148 GJ6168UH 168 in. (4.27 m) length; #6 AWG green #12-24 x 1/2 in., M6 x 12 mm, wire with yellow horizontal #10-32 x 1/2 in. and M5 x 12 mm stripe; preterminated thread-forming screws 425149 GJ6192UH 192 in. (4.88 m) length; #6 AWG green 2 306846 RGEJ657PFY #6 AWG (16 mm ) jumper 57 in. wire with yellow horizontal (1.45 m) length; factory terminated with stripe; preterminated 90° bent lug on grounding strip side; 425150 GJ6216UH 216 in. (5.49 m) length; #6 AWG green provided with 0.16 oz (5 cc) of wire with yellow horizontal antioxidant and two each #12-24 x stripe; preterminated 1/2 in., M6 x 12 mm, #10-32 x 1/2 in., 425152 GJ6240UH 240 in. (6.10 m) length; #6 AWG green M5 x 12 mm thread-forming screws wire with yellow horizontal stripe; preterminated 425153 GJ6264UH 264 in. (6.71 m) length; #6 AWG green wire with yellow horizontal stripe; preterminated 425154 GJ6288UH 288 in. (7.32 m) length; #6 AWG green wire with yellow horizontal stripe; preterminated Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.181 Grounding and Bonding PANDUIT Grounding;Racks and Cabinets/17515 Grounding;Racks and Cabinets/15323 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Support and Supplies//Physical Support Structure//Accessories Armored Fiber Cable Grounding Kits Retrofit Rack Grounding Busbar Kits PANDUIT PR29177V2-215812.eps PANDUIT PR22275V2-129735.eps FEATURES FEATURES • Bonds armored fiber cable to rack or BICSI/J-STD-607-A Telecommunications • Provides a dedicated ground system to maintain system performance and Grounding Busbar protect network equipment • Available with factory-terminated jumper kit available to provide a • Optimized for installation on 19 in. racks that meet EIA-310-D, with functioning bolt-on solution equipment, and are deployed in the field • Engineered to comply with U.S. and international grounding requirements • Thread-forming screws eliminate the need to manually remove paint from the rack Anixter No. Vendor No. Description • Engineered to comply with U.S. and international grounding requirements 425166 ACG24K For armored cable diameters 0.40 in. to Anixter No. Vendor No. Description 0.84 in. (10.2-21.3 mm); crimped jumper wire assembly, 24 in. (609.6 mm) length; 354363 RGRB19Y Grounding busbar; 19 in. (483 mm) LCC6-14, #10 mechanical clamp; length; tin-plated; fourteen holes provided with two each #12-24, arranged for flexibility in mounting; M6 slotted hex head zinc-plated provided with two each #12-24 x 1/2 in. D thread-forming screws, and black and M6 x 12 mm thread-forming screws polypropylene terminal cover 328343 RGRB19U Grounding busbar; 19 in. (483 mm) 425191 ACG24K-500 For armored cable diameters 0.85 in. to length; tin-plated twenty holes arranged 1.03 in. (21.6-26.2 mm); crimped jumper for flexibility in mounting with twenty wire assembly, 24 in. (609.6 mm) length; #12-24 x 1/2 in. hex head screws LCC6-14, #10 mechanical clamp; installed; mounting hole sets have 5/8 in. provided with two each #12-24, (15.9 mm) spacing; provided with two M6 slotted hex head zinc-plated each #12-24 x 1/2 in., M6 x 12 mm, and thread-forming screws, and black two #12 flat washers for mounting polypropylene terminal cover 354340 RGRB19CN Grounding busbar; 19 in. (483 mm) 425203 ACG24K Armored cable grounding kit with one length; tin-plated; twenty holes arranged armored cable ground terminal for for flexibility in mounting with twenty #6 AWG and one #10 mechanical #12-24 x 1/2 in. hex head screws clamp, 9/16 in. - 1 1/16 in. installed; mounting hole sets have 5/8 in. diameter range (15.9 mm) spacing; provided with two bonding cage nuts and four #12-24 bonding screws Request the latest literature and guides from Anixter. 4.182 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Grounding and Bonding PANDUIT Grounding;Racks and Cabinets/13384 Index1.Support and Supplies//Physical Support Structure//Accessories • Engineered to comply with U.S. and international grounding requirements BICSI/J-STD-607-A Telecommunications Grounding Busbars Anixter No. Vendor No. Description 331618 RGESD2-1 Two-hole ESD port with 5/8 in. hole PANDUIT PR12095V2-21985.eps spacing; provided with an ESD protection sticker, 0.16 oz (5 cc) antioxidant and two each #12-24 x 1/2 in. and M6 x 12 mm thread-forming screws 328692 RGESD2B-1 Two-hole ESD port with 5/8 in. hole spacing; provided with an ESD protection sticker, 0.16 oz (5 cc) antioxidant, two cage nut bonding studs and two #12-24 bonding nuts Grounding;Racks and Cabinets/13385 Index1.Support and Supplies//Physical Support Structure//Accessories FEATURES STRUCTUREDGROUND Bonding Screws and Bonding Cage Nut • Meets BICSI and J-STD-607-A requirements for network systems PANDUIT PR22347V2-131065.eps grounding applications • Made of high-conductivity copper and tin-plated to inhibit corrosion • Comes preassembled with brackets and insulators attached for quick installation • Use PANDUIT component labels to identify busbars to meet ANSI/TIA-606-A Anixter No. Vendor No. Description 323178 GB2B0306TPI-1 Telecommunications grounding busbar is 1/4 in. x 2 in. x 12 in. with six 1/4 in. stud hole sets at 5/8 in. spacing and three FEATURES 3/8 in. stud hole sets at 1 in. spacing • Patent-pending screws create an electrical bond between painted patch panels 326835 GB4B0624TPI-1 Telecommunications main grounding and racks or cabinets busbar is 1/4 in. x 4 in. x 20 in. with • Serrations on bottom of screw remove paint from patch panel, thus providing 24 1/4 in. stud hole sets at 5/8 in. metal-to-metal contact spacing and six 3/8 in. stud hole sets at • Thread-forming, provides a bond to the rack or cabinet by removing paint from 1 in. spacing threaded holes and minimizing metal shavings • Permanently marked with the protective earth (ground) symbol and Grounding;Racks and Cabinets/12371 Index1.Support and Supplies//Physical Support Structure//Accessories PANDUIT logo STRUCTUREDGROUND Electrostatic Discharge (ESD) Port Kit • Easily installed with Phillips screwdriver PANDUIT PR12096V2-21988.eps Anixter No. Vendor No. Description 331619 RGTBSG-C Green thread-forming bonding screw, #12-24 x 1/2 in. 390943 CNB4K Green thread-forming bonding cage nut, #12-24 and green thread-forming grounding screw, #12-24 x 1/2 in. Also available in black to meet different application needs. Contact your local sales representative for ordering information. FEATURES • Accommodates standard ESD wrist strap 4 mm plug • Can be mounted to front or back of rack or cabinet for convenient access • Bent 45°, acts as a hook to hold wrist strap • Two-hole configuration available to provide antirotation and prevent loss of bond • Barrel permanently marked with the protective earth (ground) symbol Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.183 Grounding and Bonding PANDUIT Grounding;Racks and Cabinets/13386 Index1.Support and Supplies//Physical Support Structure//Accessories • Accommodates conductors from #6 AWG to 1/0 AWG, minimizes inventory requirements STRUCTUREDGROUND Thread-forming Screws • Bonds round and square access floor pedestals for greater flexibility PANDUIT PR12098V2-21967.eps Anixter No. Vendor No. Description 351964 GPQC07-1/0 Bonds to 3/4 in. (19.1 mm) to 7/8 in. (22.2 mm) round pedestals. MCBN conductor size range: #6 to 1/0 AWG 2 (16-50 mm ). 4.25 in. (108.0 mm) D x 3.38 in. (85.9 mm) W x 3.19 in. (81.0 mm) H. Conductor tightening torque: 385 in.-lb. (43.5 Nm). Clamp tightening torque: 150 in.-lb. (17.0 Nm) Thread-forming, provides a bond to the rack or cabinet by removing paint from 372860 GPQC10-1/0 Bonds to 1.00 in. (25.4 mm) to 1 1/8 in. threaded holes and minimizing metal shavings. round pedestals. Bonds to 7/8 in. Easily installed with 5/16 in. (8 mm) socket-head wrench or flat-blade screwdriver (22.2 mm) square pedestals. MCBN Anixter No. Vendor No. Description conductor size range: #6 to 1/0 AWG 306849 RGTS-CY Thread-forming grounding screw, 2 (16-50 mm ). 4.19 in. (106.4 mm) D x #12-24 x 1/2 in. 3.38 in. (85.9 mm) W x 3.19 in. Grounding;Racks and Cabinets/14574 (81.0 mm) H. Conductor tightening Index1.Support and Supplies//Physical Support Structure//Accessories torque: 385 in.-lb. (43.5 Nm). Clamp STRUCTUREDGROUND Access Floor Grounding Clamp tightening torque: 150 in.-lb. (17.0 Nm) PANDUIT PR22274V2-129795.eps 372861 GPQC12-1/0 Bonds to 1 1/4 in. round pedestals. MCBN conductor size range: #6 to 1/0 AWG 2 (16-50 mm ). 4.53 in. (115.1 mm) D x 3.44 in. (87.4 mm) W x 3.19 in. (81.0 mm) H. Conductor tightening torque: 385 in.-lb. (43.5 Nm). Clamp D tightening torque: 150 in.-lb. (17.0 Nm) 372862 GPQC15-1/0 Bonds to 1 1/2 in. round pedestals. MCBN conductor size range: #6 to 1/0 AWG 2 (16-50 mm ). 4.47 in. (113.5 mm) D x 3.44 in. (87.4 mm) W x 3.19 in. FEATURES (81.0 mm) H. Conductor tightening • Bonds mesh common bonding network (MCBN) conductors to each other and torque: 385 in.-lb. (43.5 Nm). Clamp bonds the access floor pedestals to the conductors tightening torque: 150 in.-lb. (17.0 Nm) • Made with stainless steel hardware to eliminate zinc whiskers which can 443497 GPQC17-1/0 Bonds to 1 3/4 in. round pedestals. MCBN dislodge and enter equipment, causing shorts conductor size range: #6 to 1/0 AWG 2 • Specifically designed to bond perpendicular MCBN conductors per TIA-942 (16-50 mm ). 5.19 in. (131.8 mm) D x • Bonds to the pedestal with a single bolt to simplify installation 4.00 in. (101.6 mm) W x 3.19 in. (81.0 mm) H. Conductor tightening torque: 385 in.-lb. (43.5 Nm). Clamp tightening torque: 150 in.-lb. (17.0 Nm) 443504 GPQC20-1/0 Bonds to 2.00 in. round pedestals. MCBN conductor size range: #6 to 1/0 AWG 2 (16-50 mm ). 5.06 in. (128.5 mm) D x 4.00 in. (101.6 mm) W x 3.19 in. (81.0 mm) H. Conductor tightening torque: 385 in.-lb. (43.5 Nm). Clamp tightening torque: 150 in.-lb. (17.0 Nm) Request the latest literature and guides from Anixter. 4.184 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products LAN Furniture Great Lakes Case & Cabinets Co., Inc. ./Furniture;LAN Furniture/2481 Index1.Support and Supplies//Physical Support Structure//Lan Furniture ADVANTAGE CORNER PR23677V2-167908.eps ADVANTAGE Technical Furniture Systems GREAT LAKES CASE & CABINET ADVANTAGE STANDARD PR23680V2-167920.eps The ADVANTAGE Corner Configuration provides the same strength and features of the technical furniture system which can be installed in a very small (4 ft. x 4 ft.) space. The corner configuration can also be connected to another unit to create additional work space for applications like the broadcast edit suite. The ADVANTAGE Standard Configuration provides the basic "building block" for any Standard configurations of ADVANTAGE Technical Furniture Systems make technical furniture system. This configuration includes frames and supports, a ordering easy; basic parts are sold together so that there is no guess work, 72 in. x 31.5 in. work surface, shelving, cable management, 16 in. overhead storage technical specifications or engineer needed for purchasing bin and a double screen monitor mount. The Standard Configuration is also available your individual workstation. with a 50 in. wide work surface, shelving and storage bin. The nature of ADVANTAGE also offers a significant number of options so ADVANTAGE PROFESSIONAL PR23679V2-167918.eps please contact your local sales representative if you are looking for something unique. Your custom configuration can be designed, manufactured and shipped in just six weeks. Basic configurations which are in stock can ship in just ten business days. Furniture;LAN Furniture/16407 Index1.Support and Supplies//Physical Support Structure//Lan Furniture Sentry Console Systems GREAT LAKES CASE & CABINET PR23688V2-168249.eps The ADVANTAGE Professional Configuration provides a complete technical furniture system which could easily fit in any environment from the newsroom to the trading or executive floor. This configuration also includes a peninsula work surface for client meeting space and an under-counter drawer unit for additional storage. The Sentry Ergonomic configuration shown above features a 104 in. angled work surface which is 29.75 in. tall and 46 in. deep at its widest point. The two end-unit enclosures each contain four rails (#10-32 tapped) with 13 RMU. Three Ergotech Monitor Mounts (two single arm mounts and one dual arm mount) have capacity for four to six flat screen monitors. This configuration also includes cable management and cooling. While this configuration is standard, Sentry Console Systems are custom designed to meet the specific needs of your command/control center environment. Great Lakes offers a number of powder coated finishes for Sentry frames and enclosures and also offers a myriad of laminate colors, textures and options to meet your design needs. Functionality and style in a single platform - that's the Sentry difference. Please contact your local sales representative for further information and ordering details. Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.185 Floor Boxes Wiremold ./Floor Boxes;Floor Box Systems/2909 Index1.Support and Supplies//Hardware and Supplies//General Use RESOURCE RFB SERIES Wiremold Floor Box Systems Anixter No. Vendor No. Description 232724 RFB4-SS Four-compartment shallow stamped-steel WIREMOLD PR3327V2-143861.eps combination box (pictured above) 232725 RFB4-CI-1 Four-compartment cast-iron combination box 232726 RFB2AB-SS Activate mini bezels 232727 CILT-2AB Data bracket 232728 RFB4-LPB Bracket with low-profile bezel 232729 DTB-2-2AB Data bracket 354090 S38CCTCBS Flanged, with carpet and tile cutout 425247 FPCTCBS Flanged brass cover with carpet insert cutout The Floor Box Series from Legrand/Wiremold provides an excellent solution for unique 354098 RFB2-SS Dual service rectangular recessed applications when power and communications services are required in remote floor box locations, as in wide-open-space areas. FEATURES • TopGuard Protection for both the communications and power compartments from water and dust • Stamped steel construction meets requirements for above-grade applications • Cast-iron construction for on-grade applications • Activation can be flush or pedestal • Adjustable before and after the concrete pour 880 SERIES Anixter No. Vendor No. Description D 232710 880S2 Two-gang Omnibox, stainless steel 232711 881 Round floor box 232712 881ADP Adjusting ring 232713 881DIV Divider plate 232715 880MP Modular receptacle floor box 232716 880MPA Adjusting ring 232717 817B One-gang brass combination carpet and tile flange 232720 827B Two-gang brass combination carpet and tile flange 425238 818TCAL One-gang aluminum combination carpet and tile flange 425240 828TCAL Two-gang aluminum combination carpet and tile flange 232721 828GFITC Brass GFI lid 425245 828GFITCAL Aluminum GFI lid 232722 828R Brass duplex receptacle lid 425246 828R-TCAL Aluminum duplex receptacle lid 232723 895DCC Dual service brass duplex cover plate for Ratchet-Pro 881 Series round floor boxes 342671 817PCC-BLK Nonmetallic communications flange, black polycarbonate 342685 829PSTC-BLK Nonmetallic communications cover, black polycarbonate 354075 829STC Brass communications cover plate for Modulink floor boxes 354077 895GFI Brass GFI receptacle carpet cover plate Request the latest literature and guides from Anixter. 4.186 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Floor Boxes Wiremold Floor Boxes;Poke-thru Systems/2908 Index1.Support and Supplies//Hardware and Supplies//General Use Anixter No. Vendor No. Description Wiremold Poke Thru Systems 375592 6SER Device plate 6 in., four Ortronics Series II dual module inserts WIREMOLD PR3325V2-143860.eps 375593 6TRAC Device plate 6 in., eight Ortronics TracJack series devices 375594 8ACT8A Device plate 8 in., 8-port communications 375595 8SER Device plate 8 in., four Ortronics Series II dual module inserts 375596 8TRAC Device plate 8 in., eight Ortronics TracJack series devices The Poke Thru Series by Legrand/Wiremold is used to bring power and communications services to the open-space areas of your work environment. FEATURES • TopGuard Protection for both the communications and power compartments from water and dust • Flush installation provides aesthetically pleasing appearance • Step on it installation allows quick and easy installation without additional fasteners • Quad receptacles with individual slide covers. (Accepts furniture feed) • Recessed devices provides protection while in use Anixter No. Vendor No. Description 313599 RC4ATCGY Prewired 20 A duplex receptacle with keystone communications mounting bezels, gray, gray flange 313600 RC7ATCGY Prewired 20 A duplex receptacle with keystone communications mounting bezels, gray flange 313601 AMD8ATCGY Flange assembled unit - all communications unit to accept up to 8 ports 313602 AV3ATCGY Assembled unit with one 20 A duplex receptacle and accepts Extron Electronics MAAP Series A/V devices 232708 RC9AFFTCGY Assembled furnitured feed unit with hexagonal service head, 3/4 in. threaded hub, gray 313603 RC9AM2TCGY Gray assembled furniture feed unit complete with 1 1/4 in. and 2 in. concentric threaded openings, gray 354100 RC7AFFTCGY Gray trim flange 375586 6ATCPBK Recessed prewired 6 in. poke thru assembly with black painted aluminum cover 375588 6ATCPAVBK Recessed prewired A/V 6 in. poke thru assembly with black painted aluminum cover 375589 8ATCPBK Recessed prewired 8 in. poke thru assembly with black painted aluminum cover 375590 6ACT8A Device plate 6 in., 8-port communications Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.187 Cross-connect Backboards and Mounting Brackets Backboards ./Cross-connect;Backboards/999 Cross-connect;Backboards/1000 Index1.Support and Supplies//Physical Support Structure//Back Board Index1.Support and Supplies//Physical Support Structure//Back Board 183 Series Backboards 187B1 Backboards XXX XXX PR7243V2-143906.eps 187B1 Backboards are 16-mushroom spool boards used in equipment closets to help distribute cross-connect cabling and perform other wire management functions. Anixter No. Color Material 894106 White Metal 894064 White Particle board 183 Series backboards are used in equipment closets to mount 66 blocks for cross-connect applications. Half-field backboards hold four 89D-type brackets while full-field backboards have eight 89D-type brackets. These backboards are constructed of either metal or particle board and are available in a variety of colors. HALF-FIELD Anixter No. Series Type Color Material 894090 183A1 Blue Metal 894091 183A2 Green Metal 894092 183A4 Purple Metal 894093 183A5 Yellow Metal 894098 183A1 Blue Particle board 894100 183A2 Green Particle board D 894110 183A3 Red Particle board 894101 183A4 Purple Particle board 894099 183A5 Yellow Particle board FULL-FIELD Anixter No. Series Type Color Material 894096 183B1 Blue Metal 894095 183B2 Green Metal 894097 183B4 Purple Metal 894102 183B1 Blue Particle board 894105 183B2 Green Particle board 894108 183B3 Red Particle board 894103 183B4 Purple Particle board 894104 183B5 Yellow Particle board Request the latest literature and guides from Anixter. 4.188 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products Network Physical Infrastructure Products Cross-connect Backboards and Mounting Brackets TE Connectivity ./Cross-connect;Backboards/410 Cross-connect;Mounting Brackets/406 Index1.Support and Supplies//Physical Support Structure//Back Board Index1.Support and Supplies//Physical Support Structure//Hinged Wall Mount Universal Mounting System (UMS) Backboards Universal Mounting System (UMS) TE CONNECTIVITY PR1581V2-24341.eps TE CONNECTIVITY PR7504V2-143907.eps These backboards provide a base for UMS brackets, and are available in standard TE Connectivity's Universal Mounting System is a simple, cost-effective platform for equipment rack widths. Each width is available in a single or dual height, holding one both wall and rack applications. It is compatible with Ultim8, 25-Pair Feed-Thru and or two rows of mounting brackets, respectively. Backboards will hold combinations of Series 2 Blocks and UMS/Mini Patch Panels. The UMS simplifies installation by mounting brackets in both the Type 105 and Type 160 positions. Includes mounting providing interlocking tabs which allow the installer to create both small and large screws and nylon rivets for attaching brackets. distribution frames with no additional parts. Integral wire management for cable and jumpers is also provided. A typical installation holds 96 pairs using 12 Ultim8 Blocks Anixter No. Vendor No. Description and one Type 105 label holder. 172084 6652 2 070-19 19 in. backboard, rack-mount, 2 units high, gray FEATURES 172088 6652 2 070-23 23 in. backboard, rack-mount, • Versatility of one bracket for multiple applications 2 units high, gray • Built-in horizontal and vertical cable management 172089 6652 2 070-35 35.5 in. backboard, rack-mount, • Manufactured from robust glass-filled nylon 2 units high, gray • Easier ordering for customers • Interlinking feet for unified fields and infinite pair-count possibilities 179132 6652 2 069-19 19 in. backboard, rack-mount, • Safer no-sharp steel edges 1 unit high, gray 179181 6652 2 069-23 23 in. backboard, rack-mount, Anixter No. Vendor No. Description 1 unit high, gray 172102 6657 2 165-00 UMS Basic Kit, gray 179182 6652 2 069-35 35.5 in. backboard, rack-mount, 269162 6657 2 165-40 UMS Basic Kit, black 1 unit high, gray 185278 6657 2 005-04 Vertical cable manager, gray 238112 6652 2 080-19 19 in. backboard, rack-mount, 269163 6657 2 005-44 Vertical cable manager, black 1 unit high, black 201058 6657 2 005-03 Horizontal wire manager, gray 238113 6652 2 080-23 23 in. backboard, rack-mount, 269164 6657 2 005-43 Horizontal wire manager, black 1 unit high, black 238114 6652 2 080-35 35.5 in. backboard, rack-mount, 1 unit high, black 238115 6652 2 081-19 19 in. backboard, rack-mount, 2 units high, black 238116 6652 2 081-23 23 in. backboard, rack-mount, 2 units high, black 238117 6652 2 081-35 35.5 in. backboard, rack-mount, 2 units high, black Products. Technology. Services. Delivered Globally. 1.800.ANIXTER • anixter.com 4.189 Cross-connect Backboards and Mounting Brackets TE Connectivity Cross-connect;Mounting Brackets/418 Cross-connect;Mounting Brackets/415 Index1.Support and Supplies//Physical Support Structure//Accessories Index1.Connecting Hardware//Cross-connect Systems//Unshielded Twisted-Pair Systems Type 85 Mounting Brackets 160- and 200-pair Field Assembly Kits with Series 2 Blocks TE CONNECTIVITY PR7506V2-143909.eps TE CONNECTIVITY PR7492V2-141989.eps The Type 85 Mounting Bracket accepts 8-pair Series 2 blocks. The stainless steel The 160-pair kit provides termination or patching for 40 4-pair cables. The kit bracket comes with cable entry holes on the back and protective rubber grommets. includes 20 8-pair Series 2 Blocks, a Type 85 Label Holder and a 21-position Type All holes are 1.375 in. (35 mm) in diameter. (NOTE: When mounting directly to a wall, 85 Back-mount Frame. The 200-pair kit provides termination or patching for do not install rubber grommets.) multipurpose cable, including riser, totaling up to 200 pairs. Kit includes 20 10-pair Series 2 Blocks, Type 105 Label Holder, and a 21-position Type 105 Back-mount Anixter No. Vendor No. Description Frame. Both kits include mounting rivets and protective rubber grommets for 221882 6654 2 350-06/1 6-block positions mounting bracket rear cable entry holes. 131303 6654 2 350-11/1 11-block positions 130318 6654 2 350-21/2 21-block positions Technical Information & Standards Dimensions for 160-pair kit: Cross-connect;Mounting Brackets/419 Index1.Support and Supplies//Physical Support Structure//Accessories 18 7/16 in. H x 4 1/16 in. W x 3 13/16 in. D Type 105 Mounting Brackets Dimensions for 200-pair kit: TE CONNECTIVITY PR7508V2-143911.eps 18 7/16 in. H x 5 5/08 in. W x 3 13/16 in. D D Anixter No. Vendor No. Description 131343 6636 1 210-00 160-pair kit 132624 6638 1 180-00 200-pair kit Cross-connect;Mounting Brackets/421 Index1.Support and Supplies//Physical Support Structure//Hinged Wall Mount Type 105 Rod-mount Brackets TE CONNECTIVITY PR7509V2-143912.eps Type 105 Mounting Brackets accept Ultim8 and 10-pair Series 2 Blocks and 105 mm UMS/Mini Patch Panels. Comes with cable entry holes on back and protective rubber grommets. All holes are 1.375 in. (35 mm) in diameter. The brackets are made of stainless steel. (NOTE: When mounting directly to wall, do not install rubber grommets.) Anixter No. Vendor No. Description 221881 6655 2 450-06/1 6-block positions 131301 6655 2 450-11/1 11-block positions 130194 6655 2 450-21/2 21-block positions Type 105 Rod-mount Brackets accept Ultim8 and 10-pair Series 2 Rod-mount Blocks and 105 mm UMS/Mini Patch Panels. Install Rod-mount Brackets using Support Bars, or directly to a plywood backboard. Anixter No. Vendor No. Description 221894 6652 2 040-06 6-block positions 172099 6652 2 040-11 11-block positions 131346 6652 2 040-21 21-block positions Request the latest literature and guides from Anixter. 4.190 1.800.ANIXTER • anixter.com/literature Network Physical Infrastructure Products