Elite.Parts

Description

C&D TECHNOLOGIES-UPS12-140FR-Lead Acid Battery

Part Number

UPS12-140FR

Price

Request Quote

Manufacturer

C & D TECHNOLOGIES

Lead Time

Request Quote

Category

POWER PRODUCTS

Specifications

Charge

-10°F (-23°C) to +140°F (60°C)

Discharge

-40°F (-40°C) to +160°F (71°C)

Equalize charge and cycle service voltage

14.40 to 14.80 VDC average per 12V unit @ 77°F (25°C) (7.20 to 7.40 VDC per 6V unit.)

Float Charging Voltage

13.65 ± 1.5 VDC average per 12V unit (6.75 to 6.90 per 6V unit)

Maximum AC Ripple (Charger)

0.5% RMS or 1.5% P-P of float charge voltage recommended for best results.

Recommended Maximum Charging current limit

C/5 amperes @ 20hr rate

Terminal: Flag

0.22 in. clearance hole to accept 0.1875 in. bolt (UPS12-100MR)

Features

10 year design life @ 25°C
Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance.
Flame retardant polypropylene case and cover compliant with UL 1778
Patented UL Recognized Flame-arresting vents in each cell for safety and long life.\
Thermally welded case-to-cover bond to eliminate leakage.

Datasheet

C&D TECHNOLOGIES-UPS12-140FR-ds1-1080891804.pdf

359 KiB

Download

Extracted Text

UPS 41-9027 Valve Regulated Lead Acid Battery Designed for UPS Standby Power Applications. FEATURES & BENEFITS • 10 year design life @ 25˚C • Proprietary Fixed Orifice Plate Pasting technology applying active materials • Absorbent Glass Mat (AGM) on both sides of the grid for consistent technology for efficient gas cell-to-cell performance, higher recombination of up to 99% and capacity and uniform grid protection. freedom from electrolyte maintenance. • Thermally welded case-to-cover bond • 3 Year Warranty (refer Dynasty warranty to eliminate leakage. card, 41-9026) • Can be operated in any orientation. • Patented Long Life Alloy having the Upright, side or end mounting lowest calcium levels in the industry - recommended. minimizing grid growth, reducing gassing, and extending battery life. • Not restricted for air transport - Complies with IATA/ICAO Special • Patented UL Recognized Flame- Provisions A67. arresting vents in each cell for safety and long life. • Not restricted for surface transport - Classified as non-hazardous material • Designed with the same recombination, as related to DOT-CFR Title 49 parts thermal runaway prevention, gassing 171-189. and flame retardant characteristics of the Bellcore 4228 compliant Dynasty • Not restricted for water transport - Telecom products. Classified as non-hazardous material per IMDG Amendment 27. • Flame retardant polypropylene case and cover compliant with UL 1778 TECHNICAL DATA Watts Per Cell @ 77˚F (25˚C) Operating Time (in minutes) to 1.67 Volts per Cell Weight Weight Model Voltage 5 10 15 20 30 40 45 50 60 90 lbs kg UPS12-100MR 12 172 117 91 75 57 47 43 39 35 24 21 10 UPS12-150MR 12 288 192 148 120 89 71 65 60 51 36 27.3 12.4 UPS12-210MR 12 376 257 206 170 125 101 92 85 73 52 40 18 UPS12-300MR 12 550 382 300 244 179 144 131 121 105 76 58.4 26.5 UPS12-350MR 12 620 440 350 290 217 171 155 141 122 87 67.4 30.5 UPS12-400MR 12 720 505 400 325 237 189 172 158 136 98 75.8 34.4 UPS12-490MR 12 773 590 488 412 317 256 236 218 189 136 100 45 UPS12-540MR 12 868 654 537 450 344 277 252 230 198 139 100 45 UPS6-620MR 6 940 750 620 525 410 333 309 285 245 173 72 33 UPS SPECIFICATIONS Operating Temperature Range Discharge: -40˚F (-40˚C) to +160˚F (71˚C) with temperature compensation Charge: -10˚F (-23˚C) to +140˚F (60˚C) Nominal Operating Temperature Range +74˚F (-23˚C) to +80˚F (27˚C) Recommended Maximum Charging C/5 amperes @ 20hr rate Current Limit Float Charging Voltage 13.65 ± 1.5 VDC average per 12V unit (6.75 to 6.90 per 6V unit) Maximum AC Ripple (Charger) 0.5% RMS or 1.5% P-P of float charge voltage recommended for best results. Self Discharge Up to 6 months at 25˚C and then a freshening charge is required. For higher temps, the time interval will increase. freshening charge is required. For higher temperatures the time interval will be shorter. For lower temperatures time interval will decrease equalization charge. Equalize charge and 14.40 to 14.80 VDC average per 12V unit @ 77˚F (25˚C) (7.20 to 7.40 VDC per 6V unit.) cycle service voltage Terminal: Flag 0.22 in. clearance hole to accept 0.1875 in. bolt (UPS12-100MR) Terminal: Inserted Threaded copper alloy insert terminal to accept 10-32 UNF bolt (UPS12-150MR, UPS12-210MR) 1 ⁄4-20 UNC bolt (UPS12-300MR, UPS12-350MR, UPS12-400MR, UPS12-490MR, UPS12-540MR, UPS6-620MR) Terminal Hardware Annual Retorque 32 in.-lbs (3.48 N-m)(UPS12-100MR) Terminal Hardware Initial Torque: 40 in.-lbs. (4.5 N-m)(UPS12-100MR) Inserted Terminal 25 in.-lbs. (2.8 N-m) (UPS12-150MR, UPS12-210MR) 110 in.-lbs. (12.4 N-m) (UPS12-300MR, UPS12-350MR, UPS12-400MR, UPS12-490MR, UPS12-540MR, UPS6-620MR) DIMENSIONS Battery Termination UPS12-100MR UPS12-150MR UPS12-210MR UPS 12-300MR C A 1/4-20 UNC F 0.25 #10-32 UNF #10-32 UNF 6.42 E 0.75 0.87 0.98 19.0 22.2 24.9 0.64 0.18 16.18 4.67 B 0.50 12.62 D UPS12-350MR UPS12-400MR UPS12-490MR/UPS12-540MR UPS6-620MR AB C D E F 6.54 6.45 5.17 5.07 6.37 6.86 UPS12-100MR (166.2) (163.7) (131.3) (128.8) (161.7) (174.3) 7.76 7.54 5.19 5.02 6.52 6.80 UPS12-150MR (197.1) (191.4) (131.9) (127.6) (165.7) (172.7) 0.50 9.0 8.86 5.48 5.31 7.89 8.07 1/4-20 UNC 12.62 UPS12-210MR (228.6) (225.1) (139.2) (134.8) (200.3) (205.1) 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 10.27 10.17 6.83 6.65 7.89 8.01 UPS12-300MR (260.9) (258.4) (173.4) (168.9) (200.3) (203.5) 1.13 1.22 1.22 12.04 11.95 6.83 6.65 7.94 8.06 UPS12-350MR 28.70 31.10 31.10 (305.8) (303.5) (173.4) (168.9) (201.6) (204.8) 13.42 12.75 6.80 6.54 8.40 8.52 UPS12-400MR (340.9) (323.7) (172.7) (166.0) (213.2) (216.4) UPS12-490MR 13.57 12.74 6.80 6.63 10.81 10.93 (344.7) (323.6) (172.7) (168.4) (274.5) (277.7) UPS12-540MR 12.63 12.51 6.97 6.83 8.82 8.94 UPS6-620MR (320.8) (317.8) (177.0) (173.4) (224.0) (227.2) *All dimensions in millimeters. All dimensions are for reference only. Contact a C&D Representative for complete dimension information. 0.22 5.56 1.33 33.88 0.13 1.33 3.18 33.68 0.50 12.70 0.13 1.31 0.66 0.19 3.18 16.6 33.32 4.7 0.13 1.31 0.19 3.18 33.32 0.67 4.7 17.1 0.13 1.73 3.18 44.04 0.13 1.33 3.2 33.7 UPS UPS12-100MR Constant Power Discharge Ratings - Watts Per Cell @ 77˚F (25˚C) Operating Time to End Point Voltage (in minutes) End Point Volts/Cell 5 10 15 20 30 40 45 50 60 90 1.75 158 111 87 73 56 46 42 39 34 24 1.70 168 115 90 75 57 47 43 40 35 24 1.67 172 117 91 75 57 47 43 40 35 24 1.65 174 118 91 76 57 47 43 40 35 25 1.60 179 119 92 76 58 47 43 40 35 25 Constant Current Discharge Ratings - Amperes @ 77˚F (25˚C) Operating Time to End Point Voltage (in hours) End Point Volts/Cell .083 .25 .50 .75 1 2 3 5 8 10 12 20 24 72 100 1.90 51.1 33.0 22.4 18.2 14.0 6.30 6.05 3.94 2.62 2.14 1.82 1.14 0.96 0.34 0.24 1.85 62.8 38.4 25.3 20.5 15.6 9.10 6.60 4.29 2.85 2.33 1.98 1.24 1.05 0.37 0.26 1.80 72.3 42.1 27.1 21.8 16.4 9.50 6.86 4.45 2.95 2.41 2.05 1.28 1.08 0.38 0.27 1.75 80.0 44.3 28.1 22.5 16.9 9.75 7.00 4.53 3.00 2.45 2.08 1.30 1.10 0.39 0.28 Note: Batteries to be mounted with 0.5 in. (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. UPS12-150MR Constant Power Discharge Ratings - Watts Per Cell @ 77˚F (25˚C) Operating Time to End Point Voltage (in minutes) End Point Volts/Cell 5 10 15 20 30 40 45 50 60 90 1.75 270 182 141 115 86 69.0 63.0 58.0 49.7 35.0 1.70 282 188 144 118 87 70.0 63.9 58.8 50.4 35.5 1.67 288 192 148 120 89 71.1 64.9 59.5 51.0 36.0 1.65 292 196 150 122 90 71.8 65.3 60.0 51.5 36.3 1.60 296 200 152 123 91 72.5 66.0 60.5 51.8 36.5 Constant Current Discharge Ratings - Amperes @ 77˚F (25˚C) Operating Time to End Point Voltage (in hours) End Point Volts/Cell 1 2 3 5 8 10 12 20 24 72 1.85 22.5 12.5 8.80 5.68 3.76 3.10 2.63 1.65 1.39 0.47 1.80 23.8 13.1 9.20 5.90 3.90 3.21 2.72 1.69 1.42 0.48 1.75 25.2 13.7 9.52 6.05 4.00 3.29 2.78 1.73 1.45 0.49 Note: Batteries to be mounted with 0.5 in. (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. UPS12-210MR Constant Power Discharge Ratings - Watts Per Cell @ 77˚F (25˚C) Operating Time to End Point Voltage (in minutes) End Point Volts/Cell 5 10 15 20 30 40 45 50 60 90 1.75 340 240 195 164 121 98 90 83.0 71.8 51.0 1.70 366 252 201 168 123 99 91 84.2 72.8 52.0 1.67 376 257 206 170 125 101 92 85.0 73.3 52.4 1.65 380 259 207 171 126 101 93 85.4 73.8 52.6 1.60 392 261 209 172 127 102 93 86.0 74.2 52.8 Constant Power Discharge Ratings - Amperes @ 77˚F (25˚C) Operating Time to End Point Voltage (in hours) End Point Volts/Cell 1 2 3 5 8 10 12 20 24 72 1.85 33.0 18.7 13.3 8.60 5.78 4.74 4.02 2.50 2.10 0.73 1.80 35.0 19.5 13.9 9.20 6.10 5.02 4.25 2.63 2.21 0.76 1.75 36.5 20.6 14.5 9.40 6.23 5.09 4.30 2.67 2.24 0.77 Note: Batteries to be mounted with 0.5 in. (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. UPS UPS12-300MR Constant Power Discharge Ratings - Watts Per Cell @ 77˚F (25˚C) Operating Time to End Point Voltage (in minutes) End Point Volts/Cell 5 10 15 20 30 40 45 50 60 90 1.75 496 360 282 234 174 140 128 118 103 74 1.70 530 373 294 240 177 142 130 120 104 75 1.67 550 382 300 244 179 144 131 121 105 76 1.65 566 387 303 246 181 146 133 122 106 77 1.60 580 391 306 248 183 147 134 123 107 78 Constant Current Discharge Ratings - Amperes @ 77˚F (25˚C) Operating Time to End Point Voltage (in hours) End Point Volts/Cell 1 2 3 5 8 10 12 20 24 72 1.85 48.4 27.1 19.6 12.6 8.34 6.85 5.80 3.60 3.03 1.05 1.80 50.7 28.3 20.3 13.1 8.81 7.27 6.15 3.80 3.18 1.08 1.75 52.5 29.0 20.6 13.4 9.13 7.50 6.35 3.89 3.25 1.10 Note: Batteries to be mounted with 0.5 in. (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. UPS12-350MR Constant Power Discharge Ratings - Watts Per Cell @ 77˚F (25˚C) Operating Time to End Point Voltage (in minutes) End Point Volts/Cell 5 10 15 20 30 40 45 50 60 90 1.75 540 410 327 274 205 164 149 137 118 85 1.70 596 425 337 283 211 167 152 140 120 86 1.67 620 440 350 290 217 171 155 141 122 87 1.65 640 455 360 298 219 173 157 144 123 88 1.60 672 470 370 303 222 175 159 145 125 89 Constant Current Discharge Ratings - Amperes @ 77˚F (25˚C) Operating Time to End Point Voltage (in hours) End Point Volts/Cell 1 2 3 5 8 10 12 20 24 72 1.85 53.0 31.0 22.1 14.8 10.08 8.34 7.08 4.40 3.71 1.29 1.80 59.0 33.5 23.7 15.6 10.63 8.74 7.42 4.55 3.83 1.32 1.75 63.0 35.1 24.8 16.1 11.00 9.00 7.58 4.65 3.90 1.34 Note: Batteries to be mounted with 0.5 in. (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. UPS12-400MR Constant Power Discharge Ratings - Watts Per Cell @ 77˚F (25˚C) Operating Time to End Point Voltage (in minutes) End Point Volts/Cell 5 10 15 20 30 40 45 50 60 90 1.75 616 461 377 312 230 184 168 154 133 96 1.70 680 490 390 319 234 187 170 156 135 97 1.67 720 505 400 325 237 189 172 158 136 98 1.65 740 515 406 329 239 191 174 160 137 99 1.60 770 525 412 333 241 193 175 161 138 100 Constant Current Discharge Ratings - Amperes @ 77˚F (25˚C) Operating Time to End Point Voltage (in hours) End Point Volts/Cell 1 2 3 5 8 10 12 20 24 72 1.85 56.0 33.0 23.9 15.8 10.8 8.90 7.58 4.77 4.00 1.38 1.80 62.0 35.3 25.3 16.6 11.4 9.44 8.02 4.99 4.18 1.43 1.75 68.0 38.0 27.0 17.6 11.9 9.80 8.30 5.10 4.27 1.46 Note: Batteries to be mounted with 0.5 in. (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. UPS UPS12-490MR Constant Power Discharge Ratings - Watts Per Cell @ 77˚F (25˚C) Operating Time to End Point Voltage (in minutes) End Point Volts/Cell 5 10 15 20 30 40 45 50 60 90 1.75 660 525 444 385 300 245 224 208 183 133 1.70 740 570 472 401 310 252 231 214 186 135 1.67 773 590 488 412 317 256 236 218 189 136 1.65 800 614 500 418 322 260 238 220 191 137 1.60 840 644 513 428 327 264 241 222 192 138 Constant Current Discharge Ratings - Amperes @ 77˚F (25˚C) Operating Time to End Point Voltage (in hours) End Point Volts/Cell 1 2 3 5 8 10 12 20 24 72 1.85 80.9 47.2 34.4 22.5 15.0 12.3 10.5 6.58 5.53 1.93 1.80 85.5 50.9 36.3 23.5 15.5 12.8 10.9 6.79 5.70 1.99 1.75 90.3 53.2 37.8 24.2 16.1 13.2 11.2 6.96 5.84 2.03 Note: Batteries to be mounted with 0.5 in. (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. UPS12-540MR Constant Power Discharge Ratings - Watts Per Cell @ 77˚F (25˚C) Operating Time to End Point Voltage (in minutes) End Point Volts/Cell 5 10 15 20 30 40 45 50 60 90 1.75 723 564 472 405 320 261 239 220 190 136 1.70 825 625 512 432 334 270 247 226 193 137.5 1.67 868 654 537 450 344 277 252 230 198 139 1.65 904 679 554 459 350 282 256 234 200 141 1.60 952 696 564 465 354 284 258 237 202 143 Constant Current Discharge Ratings - Amperes @ 77˚F (25˚C) Operating Time to End Point Voltage (in hours) End Point Volts/Cell 1 2 3 5 8 10 12 20 24 72 1.90 75.0 44.0 32.0 21.4 14.4 11.9 10.1 6.35 5.35 1.85 1.85 85.0 49.5 35.8 23.4 15.8 13.0 11.1 6.94 5.88 2.00 1.80 90.0 53.0 38.0 24.6 16.4 13.6 11.5 7.20 6.06 2.07 1.75 95.0 56.0 39.9 25.6 16.9 13.9 11.8 7.35 6.17 2.11 Note: Batteries to be mounted with 0.5 in. (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. UPS6-620MR Constant Power Discharge Ratings - Watts Per Cell @ 77˚F (25˚C) Operating Time to End Point Voltage (in minutes) End Point Volts/Cell 5 10 15 20 30 40 45 50 60 90 1.75 840 680 575 500 395 320 297 275 242 168 1.70 890 720 600 520 405 332 306 280 243 170 1.67 940 750 620 525 410 333 309 285 245 173 1.65 950 760 630 532 414 335 311 288 248 176 1.60 1000 790 650 550 420 340 315 290 250 178 Constant Current Discharge Ratings - Amperes @ 77˚F (25˚C) Operating Time to End Point Voltage (in hours) End Point Volts/Cell .083 .25 .50 .75 1 2 3 5 8 10 12 20 24 72 100 1.90 250 207 149 122 94.0 57.7 42.0 27.9 19.0 15.8 13.5 8.70 7.31 2.51 1.82 1.85 332 248 174 142 110 62.7 45.5 30.0 20.3 16.9 14.5 9.30 7.84 2.73 1.98 1.80 418 288 196 158 120 68.0 48.3 31.6 21.3 17.6 15.2 9.80 8.21 2.83 2.05 1.75 454 312 208 166 123 69.5 50.0 32.4 22.0 18.2 15.6 10.0 8.38 2.87 2.08 Note: Batteries to be mounted with 0.5 in. (1.25 cm) spacing minimum and free air ventilation. Specifications subject to change without notification. UPS High Rate Max Part Number Manufacturer Approved Premium Replacement for: UPS12-100MR UPS12-100FR UPS12-150MR UPS12-140FR & MR12-150 UPS12-210MR UPS12-170FR, UPS12-200FR & MR12-210 UPS12-300MR UPS12-270FR & MR12-300 UPS12-350MR UPS12-310FR & MR12-350 UPS12-400MR UPS12-370FR & MR12-400 UPS12-490MR UPS12-475FR & MR12-490 UPS12-540MR UPS12-530FR & MR12-540 UPS6-620MR UPS6-620FR Also Available UPS CABINET SOLUTIONS SITES THAT USE UPS HIGH RATE MAX BATTERIES INCLUDE: • Data Centers • Network Operations Centers • Industrial Process Control Facilities • Internet Housing Sites • Semiconductor Manufacturing • Banks & Financial Markets • Power Generation Plants • Hospitals & Testing Laboratories • Emergency 911 response centers Call 1.800.396.2789 for more information. Any data, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby 1400 Union Meeting Road disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any P.O. Box 3053 • Blue Bell, PA19422-0858 particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely (215) 619-2700 • Fax (215) 619-7899 • (800) 543-8630 responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in user’s spe- customersvc@cdtechno.com cific application. www.cdtechno.com Copyright 2006 C&D TECHNOLOGIES, INC. Printed in U.S.A. 41-9027 5M/1006/TN

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products