Manufacturers
C & D TECHNOLOGIES PX400U4JBNHPLN
Description
C&D Technologies PX400U4JBNHPLN Power Supply - compact 400 watt Power Factor Corrected,
multiple output power supply
Part Number
PX400U4JBNHPLN
Price
Request Quote
Manufacturer
C & D TECHNOLOGIES
Lead Time
Request Quote
Category
PRODUCTS - P
Features
- Active Power Factor Correction
- Compact Size: 10” x 4.85” x 2.19”
- FCC/VDE Class B EMI Filter
- Fully Isolated and Regulated Outputs
- High Surge Current Auxiliary Outputs
- One, Two, Three and Four Output Models
- Optional Cover With Fan
Datasheet
Extracted Text
Product Data Sheet 400 WATT AC/DC POWER SUPPLY PX400/402 DESCRIPTION The PX400 is a compact 400 watt Power Factor Corrected, multiple output power supply. All outputs are fully isolated and regulated. Active current sharing circuitry, together with control functions and alarm options, simplifies N+1 and redundant applications. Fan and disk drive applications are handled by the peak current ratings of the auxiliary outputs. FEATURES !!!!! Active Power Factor Correction !!!!! High Surge Current Auxiliary Outputs !!!!! FCC/VDE Class B EMI Filter !!!!! Fully Isolated and Regulated Outputs AGENCY APPROVALS !!!!! Compact Size: 10” x 4.85” x 2.19” !!!!! One, Two, Three and Four Output Models !!!!! Optional Cover With Fan Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States Power Electronics Division, Europe 3400 E Britannia Drive, Tucson, Arizona 85706 C&D Technologies (Power Electronics) Ltd. Phone: 800.547.2537 Fax: 520.770.9369 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 PX400/402 4/98 REV B Page 1 Input Specifications Parameter Conditions Min Typ Max Units Operating Range 47-63 Hz 90 264 VAC Inrush Current Limiting 120 VAC, cold start 30 APK 240 VAC, cold start 60 APK Efficiency Nominal line and full load 75 % Power Factor Correction (PFC) 0.99 Meets IEC 1000-4-7/EN61000-3-2 (formerly IEC 555-2) Reverse V oltage Protection Remote Sense All outputs are protected to rated load current. Remote Sense is provided on Output #1 and will compensate for 1.0V of line drop. Remote Sense leads are Power Fail Signal protected against open, short and reversal. Upon AC input voltage removal, the power fail signal drops to logic zero at least 10msec before loss of DC output. Remote On/Off Upon AC input turn-on, signal remains low until outputs are The power supply is turned on with a TTL logic ‘1’ (or open) in regulation. Consult the factory for other options. signal and turned off by a switch closure or TTL logic ‘0’ referenced to (-) sense terminal. Consult the factory for other N+1 Load Share (PX402) options. Output #1 has active load sharing circuitry. Units will load share within 1% of the Maximum Rated Load. Over V oltage Protection Over T emperature Protection Output #1: 6.5V, ±0.5 VDC Thermal switch turns off power supply if overheating occurs The power supply will latch off until AC power is cycled. and automatically restarts. Over Current Protection Safety Individual current limit on all outputs. Automatic recovery UL Recognized: UL File Number E14675 (1950 & 1012) upon fault removal. CSA Certified: CSA File Number LR 9070-154C Transient Response (C22.2 No9. 234-M90, Level 6) The peak output voltage excursion will not exceed 2% and TUV License Number: R9576029 (EN60950) (IEC950) will recover within 1% in 200 µsec for a 25% step load. Cooling Output Isolation The unit is designed to operate with 40 CFM of airflow. All outputs are fully isolated. Page 2 PX400/402 4/98 REV B Output Voltages and Maximum Rated Loads OUTPUT #1 OUTPUT #2 OUTPUT #3 OUTPUT #4 MODEL NUMBER VOUT IMAX VNOM IMAX/IPK VNOM IMAX/IPK VNOM IMAX PX400/402-U3A ±5V 70A ± 12V 15A/17A ± 12V 15A/17A - - PX400/402-U3B ±5V 70A ± 15V 15A/17A ± 15V 15A/17A - - PX400/402-U4C ±5V 70A ± 12V 12A/14A ± 12V 12A/14A ± 5V 3.0A PX400/402-U4D ±5V 70A ± 12V 12A/14A ± 12V 12A/14A ± 24V 2.0A PX400/402-U4E ±5V 70A ± 12V 12A/14A ± 12V 12A/14A ± 12V 3.0A PX400/402-U4F ±5V 70A ± 15V 12A/14A ± 15V 12A/14A ± 5V 3.0A PX400/402-U4G ±5V 70A ± 15V 12A/14A ± 15V 12A/14A ± 24V 2.0A PX400/402-U4H ±5V 70A ± 12V 12A/14A ± 12V 12A/14A ± 5.2V 10.0A PX400/402-U4I ±5V 70A ± 15V 12A/14A ± 15V 12A/14A ± 5.2V 10.0A PX400/402-U4J ±5V 20A ± 17V 3A ± 17V 3A ± 24V 10.0A PX400/402-U4K ±5V 25A ± 12V 10A ± 12V 10A ± 12V 4.0A PX400/402-U4L ±5V 30A ± 12V 10A ± 12V 10A ± 5.2V 3.0A PX400/402-U4M ±5V 30A ± 15V 12A ± 15V 12A ± 5.2V 10.0A PX400/402-U4N ±5V 70A ± 12V 12A ± 12V 12A ± 3.3V 10.0A PX400/402-U4P ±5V 30A ± 12V 10A ± 12V 12A ± 24V 3.0A PX400/402-U4R ±5V 20A ± 15V 4A ± 15V 4A ± 24V 10.0A PX400/402-U4S ±5V 20A ± 12V 8A ± 12V 3A ± 24V 10.0A Note: Peak current ratings are for 10sec maximum. Total power not to exceed 400 watts. Output Specifications Parameter Limits Regulation Line ± 0.1% Load ±0.5% Cross ±0.1% Minimum Load Output #1 2.5A Hold-Up Time 30mSec at Full Load Parameter Conditions Min Typ Max Units Voltage Adustment Range ±5 % PARD 20 MHz bandwidth 0.5 % P-P Temperature Operating 040°C Storage -20 +85 °C Temperature Coefficient (TC) After half hour warm-up ± 0.02 % /°C PX400/402 4/98 REV B Page 3 Mechanical 0.040 2.148 0.700 8.500 COVER TOP VIEW 0.550 1 TB2 2 3 4 3.900 4.850 5 6 1 J9 2 3 5V 10.000 5V Return TB1 Maximum depth of mounting screws is 0.156” NOTES: All measurements are in inches FAN MOUNTED ON COVER ADDS 1.30”. COOLING: The PX400/402 is designed to operate with 40 CFM airflow. SHOCK AND VIBRATION: The PX400/402 family meets the requirements of MIL STD-810D. (Vibration-Method 514.3 Procedure I; Shock-Method 516.3 Procedure I.) WEIGHT: Approximately 4 lbs. Connector Specifications Pin Specifications Terminal Block 1 Terminal Block 2 J9 Connector J9 Connector POS FUNCTION POS FUNCTION PIN FUNCTION Molex No. 1 Ground 1 -V4 1 - Sense Connector 22-28-1050 2 AC Neutral 2 +V4 2 + Sense 3 AC Line 3 -V3 3 Current Share 4 +V3 4 Remote Inhibit 5-V2 5 Power Fail 6 +V2 Model PX402 features Active Current Sharing Standard Options are shown, consult factory for other available options. The information provided herein is believed to be reliable; however, C&D Technologies assumes no responsibility for inaccuracies or omissions. C&D Technologies assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D Technologies does not authorize or warrant any C&D Technologies product for use in life support devices/systems or in aircraft control applications. Page 4 PX400/402 4/98 REV B
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PX400U4JBNHPLN have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods