C & D TECHNOLOGIES HL02U12D05Y
Description
C&D Technologies HL02U12D05Y 2W Unregulated DC/DC Converter (DIP)
Part Number
HL02U12D05Y
Price
Request Quote
Manufacturer
C & D TECHNOLOGIES
Lead Time
Request Quote
Category
PRODUCTS - H
Features
- -25°C TO +70°C
- HIGH EFFICIENCY
- INTERNAL FILTERING
- LOW COST
- LOW OUTPUT NOISE
- NON-CONDUCTIVE CASE
- SURFACE MOUNT CONSTRUCTION
- TEMPERATURE RANGE:
Datasheet
Extracted Text
������������ Product Data Sheet 2 WATTS UNREGULATED DC/DC CONVERTER HL02U HL02U HL02U HL02U HL02U FEATURES LOW COSTHIGH EFFICIENCY INTERNAL FILTERINGLOW OUTPUT NOISE SURFACE MOUNT CONSTRUCTIONNON-CONDUCTIVE CASE TEMPERATURE RANGE: -25°C TO +70°C DESCRIPTION The HL02U Series offers an extensive selection of input The HL02U Series utilizes a 110KHz push-pull oscillator and output voltages to choose from. These miniature, in the input stage with internal filtering to reduce the unregulated DC/DC converters come in 24-pin DIP and output noise while maintaining good efficiency. SMD packages. This small size is possible through the use The use of surface mount construction and automated of surface mount manufacturing technologies. manufacturing processes increase consistency and reli- ability while reducing overall cost. ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation...................................................................0.90W Short Circuit Duration.........................................................................30 Sec Lead Temperature (soldering, 10 seconds max)..............................+300°C * Note: Refer to Reflow Profile for SMD Models. * ORDERING INFORMATION HL02U xxyzz Y/Z /H Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option DIP Package only Internet: http://www.cdpowerelectronics.com Power Electronics Division, Europe Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 C&D Technologies (Power Electronics) Ltd. Phone: 800.547.2537 Fax: 520.770.9369 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 HL02UrevD,10/97 Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at T = +25°C, nominal input voltage, rated output current unless otherwise specified. A NOMINAL RATED RATED INPUT CURRENT INPUT OUTPUT OUTPUT VOLTAGE VOLTAGE CURRENT NO LOAD RATED LOAD EFFICIENCY MODEL (VDC) (VDC) (mA) (mA) (mA) (%) HL02U05S05 5 5 400 40 540 74 HL02U05S12 5 12 167 40 480 83 HL02U05S15 5 15 133 40 480 83 HL02U12S05 12 5 400 30 230 72 HL02U12S12 12 12 167 30 210 79 HL02U12S15 12 15 133 30 210 79 HL02U15S05 15 5 400 30 190 70 HL02U15S12 15 12 167 30 170 78 HL02U15S15 15 15 133 30 170 78 HL02U24S05 24 5 400 20 125 72 HL02U24S12 24 12 167 20 110 78 HL02U24S15 24 15 133 20 110 78 HL02U05D05 5 ±5 ±200 40 540 74 HL02U05D12 5 ±12 ±83 40 490 82 HL02U05D15 5 ±15 ±67 40 490 82 HL02U12D05 12 ±5 ±200 30 230 72 HL02U12D12 12 ±12 ±83 30 210 79 HL02U12D15 12 ±15 ±67 30 210 79 HL02U15D05 15 ±5 ±200 30 190 70 HL02U15D12 15 ±12 ±83 30 170 78 HL02U15D15 15 ±15 ±67 30 170 78 HL02U24D05 24 ±5 ±200 20 120 72 HL02U24D12 24 ±12 ±83 20 110 78 HL02U24D15 24 ±15 ±67 20 110 78 COMMON SPECIFICATIONS Specifications typical at T = +25°C, nominal input voltage, rated output current unless otherwise specified. A PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Voltage Range 4.75 5 5.25 VDC 11.4 12 12.6 14.25 15 15.75 22.8 24 26.2 Reflected Ripple Current 30 100 mAp-p ISOLATION Rated Voltage 500 VDC Test Voltage 60 Hz, 10 Seconds 500 Vpk Resistance 1GΩ Capacitance 25 pF Leakage Current V = 240VAC, 60Hz 2 µArms ISO OUTPUT Rated Power 2W Voltage Setpoint Accuracy ±3 ±5 % Temperature Coefficent ±0.02 %/°C Ripple & Noise BW = DC to 10MHz 50 100 mVp-p BW =10Hz to 2MHz 10 mVrms Line Regulation High Line to Low Line ±1 ±1.5 %/% Load Regulation Rated Load to 1/4 Load ±3 ±15 % GENERAL Switching Frequency 110 kHz Package Weight 12 g MTTF per MIL-HDBK-217, Rev. F Circuit Stress Method Ground Benign T = +25°C 200 kHr A T = +70°C 40 kHr A TEMPERATURE Specification -25 +70 °C Operation -40 +85 °C Storage -40 +110 °C Page 2 HL02UrevD,10/97 MECHANICAL Package/Pinout "Y" and "Z" 1.285±0.010" 1.285±0.010" (32.64±0.25) (32.64±0.25) 2423 22 1514 13 2423 22 1514 13 TOP VIEWS 0.695±0.015" 0.525±0.010" 0.525±0.010" (17.65±0.38) (13.34±0.25) (13.34±0.25) HL02UxxyzzY HL02UxxyzzZ 1 2 3 10 11 12 1 2 3 10 11 12 SIDE VIEWS 0.375±0.005" 0.375±0.005" (9.52±0.13) (9.52±0.13) 0.015±0.005" 0.015±0.005" 0.020±0.002" 0.100±0.010" (0.38±0.13) (0.38±0.13) 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) (0.51±0.05) (2.54±0.25) END VIEWS 0.125+0.030" 0.014±0.002" 0°-15° -0.000" (0.36±0.05) (3.18+0.76) .015±.010" 0.600" ( -0.00) (.38±.25) (15.24) DIP PACKAGE SMD PACKAGE NU = Do Not Use. PIN CONNECTIONS NC = No Internal Connection. PIN# SINGLES DUALS 1 +VIN +VIN Duplicate pin functions are internally connected. 2 NU -VOUT All dimensions are in inches (millimeters). 3 NU Common GRID: 0.100 inches (2.54 millimeters) 10 -VOUT Common 11 +VOUT +VOUT Typically Marked with: specific model ordered, date 12 -VIN -VIN code, job code and Logo. 13 -VIN -VIN 14 +VOUT +VOUT 15 -VOUT Common 22 NU Common 23 NU -VOUT 24 +VIN +VIN RECOMMENDED LAND PATTERN RECOMMENDED REFLOW PROFILE 30 sec MAX (>220°C) 0.100" 250 (2.54) 235 °C MAX 220 2423 22 1514 13 200 190 0.080" 0.730" (2.03) (18.54) 150 0.040" (1.02) 100 1 2 3 10 1112 90 sec MAX (>190°C) 1.150" (29.21) 50 TIME (seconds) HL02UrevD,10/97 Page 3 TEMPERATURE (°C) TYPICAL PERFORMANCE CURVES LOAD CAPACITANCE vs INPUT RISE TIME LOAD CAPACITANCE vs INPUT RISE TIME (All 5 Vout Models) (All 12 Vout Models) 250 75 200 60 150 45 SAFE SAFE OPERATING 100 30 OPERATING AREA AREA 50 15 0 0 0 510 15 20 0 5 10 15 20 (mS) (mS) LOAD CAPACITANCE vs INPUT RISE TIME (All 15 Vout Models) EFFICIENCY vs LOAD 100% 50 40 30 SAFE 50% 20 OPERATING AREA 10 10% 0 50% 02 510 150 0% 25% 75% 100% Load (mS) VOUT vs LOAD (All Models Normalized) NOTES: 1.) When operated within the SAFE OPERATING AREA as defined 110% by the above curves, the output voltage of HL02U devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steady- state value. 100% 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. 90% 50% 125% 25% 75% 100% Load Page 4 HL02UrevD,10/97 Vout Capacitance (μF) Capacitance (μF) Efficiency Capacitance (μF)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the HL02U12D05Y have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers


What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods