DATASHEET Axis High Power over Ethernet midspans & splitters High Power over Ethernet for Axis PTZ dome network cameras. > Reduced installation costs > Support for Axis PTZ dome network cameras > IEEE 802.3at > IEEE 802.3af compliance Axis High Power over Ethernet midspans and splitters offer an easy, fast and cost-effective solution for powering network video products — specifically PTZ dome network cameras — without the need to install power outlets and electrical cabling. Axis High Power over Ethernet (High PoE) midspans and These midspans and splitters are used to power network splitters enable Axis network video products to receive devices that require more power, as specified by the IEEE data and power over the same Ethernet cable. 802.3at standard. The midspans are also IEEE 802.3af compliant, meaning that they can be used with all Axis The High PoE products make it easier to install network network video products with built-in PoE support. video products in areas where power cabling and outlets The function of a midspan is to inject power into a are unavailable, thereby reducing installation costs. network cable. A splitter, which separates data and power coming over an Ethernet cable, is used for a network video product without built-in support for PoE. www.axis.com Technical Specifications – Axis High Power over Ethernet midspans Midspan General Model AXIS T8122 DC 30 W Midspan Display and Port interfaces are located on the front panel AXIS T8123 High PoE 30 W Midspan 1-port indicators AXIS T8122: Power indicator: AC power AXIS T8124 High PoE 60 W Midspan 1-port Network indicator: Port AXIS T8123 and AXIS T8124: System indicator: AC power Function Data and power are fed to a network video product through Channel indicator: Power an Ethernet cable; use together with a High PoE splitter for a For more information, see www.axis.com/techsup network video product without built-in PoE support Compliance IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE Data rate 10/100/1000 Mbps Mounting Wall or shelf mounting Data & Power Approvals FCC Part 15, Class B with FTP cabling Connectors Shielded RJ-45, EIA 568A and 568B EN 55022 Class B (Emissions), EN 55024 (Immunity), VCCl Network cables Shielded category 5 (or higher) Safety: CB, UL/cUL per EN 60950-1, GS Mark per EN 60950-1, Wiring Data provided over pairs 1/2 and 3/6 for 10/100 Ethernet, over KCC, UL-AR all four pairs for Gigabit Ethernet AXIS T8122: IEC 60068-2-6, IEC 60068-2-27 Power over spare pairs 4/5 (+) and 7/8 (-) Operating Humidity max. 95% RH (non-condensing) AXIS T8124: Power over pairs 1/2(-), 3/6(+), 4/5 (+) and 7/8 (-) conditions AXIS T8122: -20 °C to 65 °C (-4 °F to 149 °F) Output power AXIS T8122: 52 V DC at 12-24 V DC IN (max. 30 W) AXIS T8123: -10 °C to 55 °C (14 °F to 131 °F) 44-57 V DC at 45-57 V DC IN (max. 30 W) AXIS T8124: -10 °C to 45 ºC (14 °F to 113 ºF) at 60 W AXIS T8123: 55 V DC (max. 30 W) -10 °C to 55 ºC (14 °F to 131 ºF) at 30 W AXIS T8124: 55 V DC (max. 60 W) -10 ºC to 60 ºC (14 ºF to 140 ºF) at 25 W or less Input power AXIS T8122: 12 to 24 V DC (max. 40 W) or 45 to 57 V DC* Storage AXIS T8122: -40˚C to 74˚C (-40˚F to 165˚F) (max. 35 W) Dimensions AXIS T8122: 117 x 95 x 41 mm (4.6” x 3.7” x 1.6”) AXIS T8123: AC Input Voltage: 100 to 240 V AC (max. 37 W) (HxWxD) and AXIS T8123 and AXIS T8124: 51.3 x 87.9 x 166 mm AC Frequency: 50 - 60 Hz weight (2.0” x 3.46” x 6.53”) AXIS T8124: AC Input Voltage: 100 to 240 V AC (max. 74 W) AXIS T8122: 200 g (0.4 lb.) AC Frequency: 50 - 60 Hz AXIS T8123: 350 g (0.7 lb.) Installation and Plug-and-play installation; automatically detects PoE and High AXIS T8124: 400 g (0.8 lb.) management PoE-enabled devices and supplies inline power Included AXIS T8122: DC input terminal connectors Local LED management display accessories AXIS T8122 DC 30 W Midspan - Maximum cable length between *To power units compliant with IEEE 802.3at, AXIS T8122 requires 50 to 57 V DC IN; network switch and powered device whilst to power units compliant with IEEE 802.3af, AXIS T8122 requires 45 to 57 V DC IN 110 100 More information is available at www.axis.com and on products’ Installation Guide 90 80 70 60 50 Max cable length between network 40 switch and powered device in meters. Cat5e/6, Cat5 30 20 44 46 48 50 52 54 56 58 Input voltage (Vin) Technical Specifications – Axis High Power over Ethernet splitters Splitters General Models AXIS T8126 High PoE Splitter 12V Compliance WEEE, CE AXIS T8128 High PoE Splitter 24V Operating 0 °C to 40 °C (32 °F to 104 °F) Function Separate data and power coming over a network cable for a conditions Humidity max. 90% RH (non-condensing) network video product without built-in PoE support Approvals FCC Part 15 Class A FTP, Class A UTP Data & Power EN55022 (CISPR 22) Class A Immunity EN55024 (CISPR 24) Connectors Data & power in: Shielded RJ-45 Data out: Shielded RJ-45 Dimensions 94 x 31 x 73 mm (3.7” x 1.12” x 2.87”) Power out: DC barrel connector; with ‘+’ centered (HxWxD) and 112 g (0.247 lb.) weight Output current AXIS T8126: 2 A at 12 V DC AXIS T8128: 1 A at 24 V DC Included AXIS T8126 – cable adapters for AXIS 214 PTZ, AXIS 215 PTZ, accessories video encoders Input power max. 30 W AXIS T8128 – cable adapter for AXIS 232D+, AXIS 233D Installation Plug-and-play installation between midspan and camera For a complete list of supported products, please refer to www.axis.com/products/pol/high_poe/supported.htm ©2011 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice. Maximum cable length (m) 43969/EN/R2/1109