DATASHEET AXIS M31-VE Network Camera Series Affordable and ultra-discreet outdoor fixed domes. > Flat, discreet design > Excellent video quality including HDTV 720p and H.264 > Vandal resistant > Tampering alarm > Quick installation including Power over Ethernet The palm-sized AXIS M31-VE Network Cameras are cost-effective, ultra-discreet fixed domes for monitoring outdoor entrance areas of stores, restaurants, hotels, banks and offices. Designed for placement near the entrance of buildings, AXIS M31-VE cameras are designed for quick installation. Left: setting AXIS M31-VE cameras are encased in a UV-resistant The desired viewing direction and a leveled image can be view with casing with a weather shield and have protection easily achieved by using the supplied lens tool. The tool lens tool Right: model against rain, snow, sun and dust. They can operate in can also be used to exchange and focus the lens when a without temperatures from 50 °C (122 °F) down to -20 °C (-4 °F). lens with a different angle of view is required. weather shield The cameras are also vandal-resistant and can detect tampering attempts such as blocking or spray-painting. The cameras provide a pixel counter for verifying that the pixel resolution of an object meets specific requirements. Providing excellent quality video at full frame rate, Power over Ethernet support further simplifies the camera series consists of AXIS M3113-VE with installation since only one cable is needed for carrying SVGA resolution and AXIS M3114-VE, which supports power and video. 1 megapixel and HDTV 720p. Models without the weather shield, which provide a greater tilt range, are suitable for ceiling-mount installations where the shield is not required, such as in a cold storage room or under a porch. www.axis.com Technical specifications – AXIS M31-VE Network Camera Series Camera System integration Models AXIS M3113-VE: SVGA resolution, weather shield, 2.9 mm lens Application Open API for software integration, including VAPIX® and AXIS M3113-VE Nocap: SVGA, no weather shield, 2.9 mm lens Programming AXIS Camera Application Platform; specifications at AXIS M3114-VE: 1 MP, weather shield, 2.9 mm lens Interface www.axis.com ONVIF, specifications at www.onvif.org AXIS M3114-VE Nocap: 1 MP, no weather shield, 2.9 mm lens AXIS M3114-VE Nocap 2 mm: 1 MP, no weather shield, AXIS Video Hosting System (AVHS) with One-Click Camera connection 1.97 mm lens Image sensor 1/4" progressive scan RGB CMOS Intelligent video Video motion detection, active tampering alarm, AXIS Camera Application Platform Lens M12 mount, fixed iris, megapixel resolution AXIS M3113-VE/Nocap: 2.9 mm, 66° view*, F2.0 Events Intelligent video AXIS M3114-VE/Nocap: 2.9 mm, 80° view*, F2.0 Alarm actions File upload via FTP, HTTP and email; notification via email, HTTP AXIS M3114-VE Nocap 2 mm: 1.97 mm, 105° view*, F3.0 and TCP; video recording to edge storage; pre- and post-alarm *horizontal angle of view video buffering Light sensitivity AXIS M3113-VE/Nocap, AXIS M3114-VE/Nocap: Installation aids Pixel counter 1 - 100000 lux, F2.0 in software AXIS M3114-VE Nocap 2 mm: 1 - 100000 lux, F3.0 General Shutter time 1/24 500 s to 1/6 s Casing IP66-, IP67- and NEMA 4X-rated, IK08 impact-resistant Camera angle AXIS M31-VE: Pan ± 30°, tilt 0° - 65°, rotation ± 180° aluminum and polycarbonate casing; dehumidifying membrane; adjustment AXIS M31-VE Nocap: Pan ± 30°, tilt 0° - 90°, rotation ± 180° captive screws Video AXIS M31-VE: with weather shield AXIS M31-VE Nocap: without weather shield Video H.264 (MPEG-4 Part 10/AVC) Processors and ARTPEC-3, 128 MB RAM, 128 MB Flash compression Motion JPEG memory Resolutions AXIS M3113-VE/Nocap: 800x600 to 160x90 AXIS M3114-VE (all models): 1280x800* to 160x90 Power Power over Ethernet IEEE 802.3af Class 1, max. 3.2 W *1440x900 (1.3 MP) scaled resolution available via VAPIX® Connectors Male RJ-45 10BASE-T/100BASE-TX PoE on a 3 m (9.8 ft.) Frame rate 30 fps in all resolutions network cable H.264/Motion JPEG Edge storage Support for recording to network share (Network Attached Video streaming Multiple, individually configurable streams in H.264 and Storage or file server) Motion JPEG Operating -20 °C to 50 °C (-4 °F to 122 °F) Controllable frame rate and bandwidth conditions Humidity 15 - 100% RH (condensing) VBR/CBR H.264 Approvals EN 55022 Class B, EN 60950-22, EN 61000-3-2, EN 61000-3-3, Pan/Tilt/Zoom Digital PTZ, preset positions, guard tour EN 61000-6-1, EN 61000-6-2, EN 55024, ICES-003 Class B, Image settings Compression, color, brightness, sharpness, contrast, white balance, FCC Part 15 Subpart B Class B, VCCI Class B exposure control, exposure zones, backlight compensation, C-tick AS/NZS CISPR 22, EN 60950-1 wide dynamic range - dynamic contrast, fine tuning of behavior IEC 60721-3-4 Class 4K3 (temperature range -20°C to 50°C) at low light, mirroring of images IEC 60529 IP66/IP67, NEMA 250 Type 4X Rotation: 0°, 90°, 180°, 270°, including Corridor Format IEC 62262 Class IK08 Text and image overlay, privacy mask Weight 330 g (0.73 lb.) Network Included Lens tool, top cover tool, drill hole template, mounting adapter, Security Password protection, IP address filtering, digest authentication, accessories Installation Guide, CD with installation tools, recording software HTTPS encryption**, IEEE 802.1X**, user access log and User’s Manual, Windows decoder 1-user license Supported IPv4/v6, HTTP, HTTPS**, SSL/TLS**, QoS Layer 3 DiffServ, FTP, SMTP, **This product includes software developed by the OpenSSL Project for use in the protocols Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, OpenSSL Toolkit. (www.openssl.org) RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS More information is available at www.axis.com Dimensions Optional accessories 51 mm (2.0”) 109 mm (4.3”) 36 mm (1.4”) M12 mount lenses AXIS T90A White LED AXIS T8412 (not applicable for Illuminators Installation Display AXIS M3114-VE Nocap 2 mm) With weather shield Without weather shield AXIS Camera Station and video management software from Axis' Application Development Included accessories (see further details in the table above) Partners. For more information, see www.axis.com/products/video/software/ Adapter for surface cable Lens tools Top cover mounting tool For 2.9 mm and optional lenses For 2 mm lens ©2011 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice. 107 mm (4.2”) 48 mm (1.9”) 36 mm (1.4”) 44157/EN/R1/1111