AVX VJ13MC0600KBA

Medium Power MLV (VC13, 14, 15, 20) Medium Power Multilayer Chip Varistor Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX’s Transient Voltage Suppression (TVS) devices address six trends in today’s electronic circuits: (1) mandatory ESD protection, (2) mandatory EMI control, (3) signal integrity improvement, (4) PCB downsizing, (5) reduced component placement costs, and (6) protection form induced slow speed transient voltages and currents. AVX’s Medium Power Multilayer Varistors include 3 series of products as listed below: • Standard 1210 Series (VJ13) • Telecom Series (VC14) • Automotive Range (VC13, 14, 15, 20) TYPICAL APPLICATIONS Mainly used to reduce transient over-voltages in a very wide range of electronic products. Some example applications are 1) Telecom, 2) Automotive, 3) Consumer Electronics, and 4) Industrial Applications. PHYSICAL DIMENSIONS: mm (inches) Type IEC Size L l bm t max 3.20±0.20 1.60±0.20 0.50±0.25 1.70 VC20 1206 (0.126±0.008) (0.063±0.008) (0.020±0.010) (0.067) L 3.20±0.20 2.50±0.20 0.50±0.25 1.70 VC13 1210 (0.126±0.008) (0.098±0.008) (0.020±0.010) (0.067) t 4.50±0.20 3.20±0.20 0.50±0.25 1.70 bm VC14 1812 (0.177±0.008) (0.126±0.008) (0.020±0.010) (0.067) I 5.70±0.20 5.00±0.20 0.50±0.25 1.70 VC15 2220 (0.224±0.008) (0.197±0.008) (0.020±0.010) (0.067) PART NUMBERING VC 14 M T 0950 K BA Varistor Series Chip Size Code Series Code AC Operating 1mA Voltage Packaging VC = Unplated 20 = 1206 M = Standard A = Automotive Voltage Tolerance BA = Tape & Reel VJ = Plated 13 = 1210 P = Pro Grade T = Telecom K = ±10% VC20: 4000 pcs/reel 14 = 1812 C = Standard VC13: 2000 pcs/reel 15 = 2220 VC14: 1500 pcs/reel VC15: 1250 pcs/reel 11 Medium Power MLV (VC13, 14, 15, 20) Medium Power Multilayer Chip Varistor Transient Voltage Suppression, ESD Protection Devices & EMI Devices STANDARD SERIES - VJ13 (1210) FEATURES PULSE DEGRADATION • Plated Ni Barrier Terminations • Bi-Directional Protection Repetitive Peak Current Strikes • Fast Turn-On Time 10% VJ13MC0180K • Multiple Strike Capability VJ13PC0300K • Provides EMC Capacitance 8% VJ13MC0260K VJ13PC0480K • 1210 EIA Case Size VJ13MC0600K 6% 4% TARGET APPLICATIONS 2% Consumer Electronic Products 0% -2% 0100 200 300 400 500 GENERAL CHARACTERISTICS Number of Strikes Storage Temperature: -55ºC to +125ºC Operating Temperature: -55ºC to +125ºC CAP VS FREQ CHARACTERISTICS V/I CHARACTERISTICS Capacitance/Frequency Characteristics I/V Characteristics: 1210 Size 100 300 VJ13MC0180K 80 250 VJ13PC0300K VJ13MC0180K VJ13MC0260K 60 200 VJ13PC0300K VJ13MC0480K 40 150 VJ13MC0600K 20 100 VJ13MC0600K 0 50 0 -20 020 40 60 80 100 1E-06 1E-05 0.0001 0.001 0.01 0.1 1 10 100 1000 I (A) Frequency (MHz) PART NUMBERS Part Number Operating Vnominal Vclamp Energy Max. Peak Typical CAP Voltage At 1mA DC (8x20µs) (10x1000µs) Current (1kHz/.5Vrms) (8x20µs) Vdc min Nom max Vp Ip(A) J A pF VJ13MC0180KBA 18 21.5 24 26.5 45 10 1.5 500 3000 VJ13MC0260KBA 26 29.7 33 36.3 62 10 1.2 300 1120 VJ13MC0300KBA 30 35 39 43 73 10 0.9 220 1020 VJ13PC0300KBA 30 35 39 43 73 10 1.2 280 1150 VJ13MC0480KBA 48 54.5 60.5 66.5 110 10 0.9 220 800 VJ13PC0480KBA 48 54.5 60.5 66.5 110 10 1.2 250 840 VJ13MC0600KBA 60 67 75 83 126 10 1.5 250 600 12 Capacitance Change (%) Change in V1mA V (V) Medium Power MLV (VC13, 14, 15, 20) Medium Power Multilayer Chip Varistor Transient Voltage Suppression, ESD Protection Devices & EMI Devices STANDARD SERIES - VJ13 (1210) TEMPERATURE DEPENDENCE OF V/I CHARACTERISTIC VJ13MC0180K 100 -40°C +25°C +85°C +125°C 10 1E-07 1E-06 1E-05 1E-04 1E-03 1E-02 Current (A) VJ13PC0480K 100 -40°C +25°C +85°C +125°C 10 1E-07 1E-06 1E-05 1E-04 1E-03 1E-02 Current (A) VJ13MC0600K 100 -40°C +25°C +85°C +125°C 10 1E-07 1E-06 1E-05 1E-04 1E-03 1E-02 Current (A) 13 Voltage as percent of \ Voltage as percent of \ Voltage as percent of \ Medium Power MLV (VC13, 14, 15, 20) Medium Power Multilayer Chip Varistor Transient Voltage Suppression, ESD Protection Devices & EMI Devices TELECOM SERIES - VC14 (1812) FEATURES TARGET APPLICATIONS • Pd/Ag Terminations • Phone Lines, ADSL Lines, and other Telecom Circuits • High Energy Ratings (up to 6 Joules with 1812 case) • Consumer Products • Multiple Strike Capability • Provides EMC Capacitance GENERAL CHARACTERISTICS • Effective Alternative to Leaded MOVs between 60-90Vrms Storage Temperature: -55ºC to +125ºC • Specified in accordance to CCITT 10/700ms Pulse test Operating Temperature: -55ºC to +125ºC CCITT 10x700µs TEST A test pulse of 10x700µs duration as specified by CCITT or 10/700 Telecom Test Pulse Wave-Form IEC 61000-4-5 is often used to check the interference immunity of telecom equipment. 2000 The curves show that the 60Vrms varistor can reduce the Without Varistor interference voltage at the equipment connected from 2kV (Open-circuit voltage) 1500 to less than 200V. 1000 10/700 Pulse Test Capability With a 60Vrms Telecom Varistor 500 Typical V1mA Drift (Protection level <200V) 10% 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 8% Time (ms) 60Vrms 6% Ten pulses with a duration of 10x700µs applied at one 95Vrms minute intervals are specified for telecom equipment. 4% The curves show the V1mA drift when more than 10 pulses are applied. 2% 0% 110 100 1000 Pulses PART NUMBERS Part Number Operating Vclamp Energy Max Ipeak Mean CCITT Typical Voltage (8x20µs) (10x1000µs) (8x20µs) Power 10Pulse Cap 1 Surge Dissipation (10x700µs) Vrms Vdc Vp Ip J Ip (A) W V pF VC14MT0600KBA 60 85 200 45 6 400 0.015 2000 400 VC14MT0950KBA 95 125 270 45 5 250 0.015 2000 250 14 dV/V1mA Voltage Medium Power MLV (VC13, 14, 15, 20) Medium Power Multilayer Chip Varistor Transient Voltage Suppression, ESD Protection Devices & EMI Devices AUTOMOTIVE SERIES – VC13, 14, 15, 20 FEATURES TARGET APPLICATIONS • Pd/Ag Terminations Automotive and other Consumer Products • High Energy Ratings (up to 25 Joules with 2220 case size) • Multiple Strike Capability TEMPERATURE CHARACTERISTICS • Provides EMC Capacitance For Current, Energy and Power • Well suited to protect against automotive related transients • Specified with “Load Dump” and “Jump Start” Test Requirements 100 80 GENERAL CHARACTERISTICS 60 Storage Temperature: -55ºC to +125ºC 40 Operating Temperature: -55ºC to +125ºC 20 0 -55 -25 0 25 50 75 100 125 150 Ambient Temperature (°C) V/I CHARACTERISTICS IMPEDANCE CHARACTERISTICS 100 V/I Characteristics: Automotive Parts 250 10 200 VC13MA0160K VC14MA0160K 150 VC15PA0160K 1 VC15PA0160K VC20MA0160K VC15MA0160K VC15MA0160K 100 VC14MA0160K VC15MA0340K VC13MA0160K 0.1 VC20MA0160K 50 VC15MA0340K 0 0.01 1E-06 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 10000 1,000 10,000 100,000 1,000,000 I (A) Frequency (kHz) PART NUMBERS Part Number Case Operating Vnominal Vclamp Leakage Energy Load Jump Max.Peak Mean CAP Size Voltage At 1mA DC (8x20µs) At Vdc (10x1000µs) Dump Start Current Power (1kHz/ (10x) 5min (8x20µs) Dissipation .5Vrms) EIA Vrms Vdc min Nom max Vp Ip(A) µA J J Max V Ip (A) W pF VC20MA0160KBA 1206 14 16 22 24.5 27 40 1 50 0.6 1.5 24.5 200 0.008 900 VC13MA0160KBA 1210 14 16 22 24.5 27 40 2.5 100 1.6 3 24.5 400 0.010 1800 VC14MA0160KBA 1812 14 16 22 24.5 27 40 5 100 2.4 6 24.5 800 0.015 5000 VC15MA0160KBA 2220 14 16 22 24.5 27 40 10 100 5.8 12 24.5 1200 0.030 11000 VC15PA0160KBA 2220 14 16 22 24.5 27 40 10 100 5.8 25 24.5 1200 0.030 16000 VC15MA0340KBA 2220 30 34 42.3 47 51.7 77 10 100 12 12 50 1200 0.030 4000 15 Z (Ohms) V (V) Percent of Rating Value Medium Power MLV (VC13, 14, 15, 20) Medium Power Multilayer Chip Varistor Transient Voltage Suppression, ESD Protection Devices & EMI Devices AUTOMOTIVE SERIES – VC13, 14, 15, 20 AUTOMOTIVE LOAD DUMP TEST (According to ISO DP7637/2 Pulse 5) V z 90% When using the test method indicated below, the amount of Energy dissipated by the varistor must not exceed the Load Dump Energy value specified in the product table. 10% V i 0V t Tr Td Voltage Pulse applied to the varistor: 12V Network 24V Network Vi = 13.5V Vi = 27V Td = 100 to 350ms Td = 100 to 350ms Ri = 2 Ohms (Internal Resistance) Ri = 2 Ohms (Internal Resistance) Vz - 70 to 200V Vz - 70 to 200V Number of Pulses = 10 Pulses Number of Pulses = 10 Pulses Other Load Dump Simulations can be achieved PULSE DEGRADATION Repetitive Peak Current Strikes 16% VC15PA0160K @1200A 14% VC15MA0160K @1200A 12% VC15MA0340K @1200A 10% 8% VC14MA0160K @800A 6% VC13MA0160K @400A 4% VC20MA0160K @200A 2% 0% 0 100 200 300 400 500 600 Number of Strikes 16 Change in Breakdown Voltage (%) Medium Power MLV (VC13, 14, 15, 20) Medium Power Multilayer Chip Varistor Transient Voltage Suppression, ESD Protection Devices & EMI Devices AUTOMOTIVE SERIES – VC13, 14, 15, 20 TEMPERATURE DEPENDENCE OF V/I CHARACTERISTIC VC20MA0160K 100 -40°C +25°C +85°C +125°C 10 1E-07 1E-06 1E-05 1E-04 1E-03 1E-02 Current (A) VC13MA0160K 100 -40°C +25°C +85°C +125°C 10 1E-07 1E-06 1E-05 1E-04 1E-03 1E-02 Current (A) VC14MA0160K 100 -40°C +25°C +85°C +125°C 10 1E-07 1E-06 1E-05 1E-04 1E-03 1E-02 Current (A) 17 V/V1mA (%) V/V1mA (%) V/V1mA (%) Medium Power MLV (VC13, 14, 15, 20) Medium Power Multilayer Chip Varistor Transient Voltage Suppression, ESD Protection Devices & EMI Devices AUTOMOTIVE SERIES – VC13, 14, 15, 20 TEMPERATURE DEPENDENCE OF V/I CHARACTERISTIC VC15MA0160K 100 -40°C +25°C +85°C +125°C 10 1E-07 1E-06 1E-05 1E-04 1E-03 1E-02 1E-01 Current (A) VC15PA0160K 100 -40°C +25°C +85°C +125°C 10 1E-07 1E-06 1E-05 1E-04 1E-03 1E-02 Current (A) VC15MA0340K 100 -40°C +25°C +85°C +125°C 10 1E-07 1E-06 1E-05 1E-04 1E-03 1E-02 Current (A) 18 V/V1mA (%) V/V1mA (%) V/V1mA (%)