AUTOMATION DIRECT DP-C321
Specifications
Agency Approval
UL,CUL,CE
Dimensions
5.906”x7.402”x1.85” (150x188x47 mm)
Enclosure
IEC standard IP65F (NEMA 4)
Humidity
15-85% R.H. (non-condensing)
Number of Screens
Up to 1024 limited by memory
Operating Temperature
0° to 50° C (32 to 122°F)
Power Consumption
14 Watts @ 24VDC
Real Time CLock
Standard
Serial Communication
1 - RS-232, 1 - RS422
Service Power
24VDC (20.5-28.8VDC operating range)
Shock
10G for under 12ms in the X, Y, and Z axis
Storage Temperature
-10° to 60° C (14 to +140°F)
User Memory
512K System Ram Memory. 1 Mb Screen Data Memory
Vibration
5 to 55Hz 2G for 2 hours in the X, Y, and X axis
Weight
1.4 lbs.
Withstand Voltage
1000kVDC (1 minute), between power supply and protective ground (FG)
Features
- (RS422)
- 1,048 pre-drawn ISO symbols to use in building new parts
- 16-level Undo and Redo
- 5.7 inch display
- 64 pre-built parts: keypads, meters, graphs and number, text and time display fields, etc.
- Build custom panel parts for your specific applications
- Built-in Battery-backed Clock/Calendar
- Built-in Fault (Alarm) Screens
- Built-in Keypads: 10-key for numbers and keyboard for text
- Communicate with multiple DirectLogic PLCs
- Fast Compile and Download
- Floating Toolbars: Standard, Drawing, Control and Part
- Import and Edit Bitmaps
- Part Libraries: for custom and built-in parts
- Screen Password Protection
- Separate Compile and Download functions
- Snap Grid
- Two-port Communication: RS232 and RS422 for PC and PLC at the same time (with certain PLCs)
- Up to 1,024 screens limited by 1Mb of screen data (typical screens are 1 to 3 K)
- Upload from the Panel
- Windows 95/98/2000/NT compatible
Datasheet
Extracted Text
DirectTouch Panel Overview The DP-M321 and DP-C321 are fully programmable touch panels, providing power and flexibility through a rich set of features. The back-lit LCD display is available in either monochrome (DP-M321) or color (DP-C321). The DirectTouch Panel is configured using the ScreenCreator soft- ware. The software is a graphics editor with built-in panel parts such as number keypads, push- buttons, indicator lights, meters and graphs. Features 64 pre-built parts: keypads, meters, graphs and number, text and time display fields, etc. Separate Compile and Download functions DirectTouch Panel Model 5.7 inch display Specification 6” Monochrome 6” Color Floating Toolbars: Standard, Drawing, Control and Part DP-M321 DP-C321 Build custom panel parts for your Backlit LCD Backlit LCD specific applications Display Type (Blue and Gray) 16/256 Part Libraries: for custom and built-in parts Snap Grid Display Size 5.7” diagonal 5.7” diagonal Fast Compile and Download 320 x 240 320 x 240 Windows 95/98/2000/NT compatible Resolution 1,048 pre-drawn ISO symbols to use in 140 nits Display Brightness building new parts Upload from the Panel Touch Screen 192 resistive touch cells (16x12) 192 resistive touch cells (16x12) Up to 1,024 screens limited by 1Mb of screen Service Power 24VDC (20.5-28.8VDC operating range) data (typical screens are 1 to 3 K) 14 Watts @ 24VDC Built-in Battery-backed Clock/Calendar Power Consumption Two-port Communication: RS232 and RS422 Enclosure IEC standard IP65F (NEMA 4) for PC and PLC at the same time (with certain PLCs) Agency Approval UL,CUL,CE Communicate with multiple DirectLogic PLCs 0° to 50° C (RS422) Operating Temperature (32 to 122°F) Built-in Fault (Alarm) Screens Built-in Keypads: 10-key for numbers and -10° to 60° C keyboard for text Storage Temperature (14 to +140°F) Screen Password Protection 16-level Undo and Redo Humidity 15-85% R.H. (non-condensing) Import and Edit Bitmaps Withstand Voltage 1000kVDC (1 minute), between power supply and protective ground (FG) 5 to 55Hz 2G for 2 hours in the X, Y, and X axis Vibration 10G for under 12ms in the X, Y, and Z axis Shock 512K System Ram Memory User Memory 1 Mb Screen Data Memory Up to 1024 limited by memory Number of Screens Real Time CLock Standard Serial Communication 1 - RS-232, 1 - RS422 5.906”x7.402”x1.85” Dimensions (150x188x47 mm) 1.4 lbs Weight he world’s most practical automation products, at almost-free prices, delivered by 11 a.m., just by clicking a mouse. The world’s most practical automation products, at almost-free prices, delive T Section 9 — Operator Interface Toll-free orders 1-800-633-0405 www.automationdirect.com 1 a.m., just by clicking a mouse. The world’s most practical automation products, at almost-free prices, delivered by 11 a.m., just by clicking a mouse. The world’s most practical automation pro 518 t almost-free prices, delivered by 11 a.m., just by clicking a mouse. The world’s most practical automation products, at almost-free prices, delivered by 11 a.m., just by clicking a mouse. The w most practical automation products, at almost-free prices, delivered by 11 a.m., just by clicking a mouse. The world’s most practical automation products, at almost-free prices, delivered by 11 a.m RS232C DC 24V + ± FG Overall Dimension DirectTouch Panel Cables for DirectTouch Panel-to-PLC Connections Cables Port Family PLC (or other device) Cable Regardless of which PLC you are DL05: D0-05 DL05: both DP-2CBL-A using, you will need two cables: DirectLOGIC DL105: F1-130 DL105: only one DL05/DL105 DP-PGMCBL: This cable is used Only one to configure and program the D2-230 DP-2CBL-A panel. This is a 9-pin female to D2-240 Top port DP-2CBL-A 9-pin male cable that connects Bottom port DP-2CBL-A DirectLOGIC your personal computer to the DL205 D2-250 Top port DP-2CBL-1 DirectTouch Panel. Bottom port DP-DSCBL-2 PLC Cable: You will also need Only one D2-DCM (module) DP-3CBL-2 the appropriate cable to connect D3-330/330P Requires DCU* DP-3CBL-2 your PLC to the DirectTouch D3-340 Top port DP-3CBL Panel. Use the chart shown to DirectLOGIC Bottom port DP-3CBL the right to choose the correct DL305 D3-350 Top port communications cable. DP-2CBL Bottom port DP-3CBL-2 Dimensions and D4-430 Top port (15-pin) DP-4CBL Bottom port (25-pin) DP-3CBL-2 Installation D4-440 Top port DP-4CBL It is important to understand the Bottom port DP-3CBL-2 DirectLOGIC installation requirements for DL405 D4-450 Phone Jack DP-2CBL-A operator interfaces. Sometimes Top port (15-pin) DP-4CBL the size alone can dictate your Bottom port (25-pin) choice of unit. This is especially DP-3CBL-2 true with respect to the depth of Only one D4-DCM (module) DP-3CBL-2 the unit. Please make sure you 5/03, 5/04 Bottom port DP-ABCBL-1 Allen-Bradley DP-ABCBL-2 Micrologix 1000/1500 consider the space required for SLC 500 proper access to cables, power wiring, etc. Also, you may need to consider the environmental requirements, agency approvals, etc. for your application. 7.402" Back Side (188 mm) DP±C320 Cable Connector S/N 020023 5.906" 5.630" (150 mm) FG (143mm) SG RD± RD+ SD± SD+ 0.275" 7.677" (7.0mm) (195mm) 2.25" 1.575" Overall Dimension (57.1mm) (40.0mm) Top 1.85" Panel Cut-out 5.65+/-0.012" (47.0mm) (143.5 +/-0.3mm) Dimensions 0.275" (7.0mm) 2.25" Cable Connector (57.1mm) 7.421 +/-0.012" (188.5 +/-0.3mm) The world’s most practical automation products, at almost-free prices, delivered by 11 a.m., just by clicking a mouse. The world’s most practical automation products, at almost-free prices, deliv www.automationdirect.com Fax orders 1-770-889-7876 Section 9 — Operator Interface 11 a.m., just by clicking a mouse. The world’s most practical automation products, at almost-free prices, delivered by 11 a.m., just by clicking a mouse. The world’s most practical automation p 519 at almost-free prices, delivered by 11 a.m., just by clicking a mouse. The world’s most practical automation products, at almost-free prices, delivered by 11 a.m., just by clicking a mouse. The most practical automation products, at almost-free prices, delivered by 11 a.m., just by clicking a mouse. The world’s most practical automation products, at almost-free prices, delivered by 11 a
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the DP-C321 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Automation Direct D4-16TA Output Module. 16 Outputs per Module | 2 Isolated Commons per Module | 15-...

Automation Direct D4-16TD1 DC Output Module. 16 Point | NPN Open Collector | 2 Internally Connected ...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods