ME-LGR line Powerful Multi-Equipment Controllers and Routers Combining the features of our powerful multi-equipment controller with a high-speed BACnet router, the ME-LGR can do it all. Need 100 Mbps communications to a critical control site? Need to control multiple pieces of equipment at that site? Need to integrate third-party equipment on a proprietary network with your BACnet system? No problem. The ME-LGR can do it all, and it can also serve as a router to controllers on an ARCNET 156 Kbps or MS/TP network. Key Features and Benefits • Multi-equipment capabilities support general HV-ac applications including complex central plants. • 10/100Base-T Fast Ethernet provides high speed communications to controller; ideal for critical control applications. • 10/100Base-T Fast Ethernet allows modules to serve as a BACnet router between BACnet/IP system backbone and field devices subnetwork. • Native BACnet communications to field devices over a high-speed ARCNET 156 Kbps or BACnet MS/TP network. • Protocol translator package allows the ME controllers to serve as a gateway between BACnet and a wide range of open and proprietary networks. • Controller units include an expansion port for MEx I/O expanders or previous generation MX expanders. Up to six MEx expanders can be mounted in a stack or remotely mounted for scalable control solutions. • Designed with a high-speed true 32-bit microprocessor with cache memory, Fast Ethernet controller, high performance 32-bit serial communications co-processor, ARCNET communications co-processor and CAN (Control Area Network) co-processor, ME-LGR controllers have the horsepower to serve the most demanding control applications. • 16 MByte battery-backed SDRAM (32 bit wide), with 12 MBytes available for use, stores application programs, trends and other data when power is lost. • 8 MByte Flash memory (32 bit wide) for easy field upgrades over the network. • Battery backed real-time clock provides true standalone capabilities. Control modules recover from power failures providing full continuity of operations, even when communications are disrupted. • Rnet port supports Automated Logic’s line of RS room sensors and 6 BACview local operator interface, and provides local access to the system. Enhanced local access is also available on EIA-232 port. • ME line controllers are fully graphically programmable and offer full peer-to-peer communications with other ME line, SE line or ZN line controllers. Graphical programs are universally understood and provide self-documenting control sequences. 1150 Roberts Boulevard • Tough construction delivers superior performance and reliability. Kennesaw, Georgia 30144 Modules are constructed with a rugged aluminum cover which 770/429-3000 provides optimum electrical protection and noise immunity. Fax 770/429-3001 www.automatedlogic.com ME-LGR line Specifications Enterprise System Web Browser Web Browser Cell Phone PDA Server XML/SOAP HTML/HTTP WML/WAP WML/WAP HTML/HTTP ® BACnet /IP, 100Base-T Ethernet Internet T o ME812u-E LGR Router Third Party Ethernet, ARCNET, EIA-485, EIA-232 or ME-LGR Controller Equipment Router/Controller BACnet MS/TP, ARCNET ME line SE line ZN line Room Controller Controller Controller Controller Room Sensor Room Sensor Room Sensor BACnet Support: Conforms to the BACnet Building Controller (B-BC) Standard Device as defined in BACnet 135-2001 Annex L. Communication: The following ports are available on the LGR routers: Ethernet port* (10/100Mbps) for BACnet over Ethernet or BACnet/IP communications. EIA-485 port for ARCNET 156 Kbps or BACnet MS/TP (9600 baud to 76.8 Kbps). EIA-232/485*configurable port for BACnet PTP. 6 Rnet port for RS room sensors and local BACview operator displays. Xnet (500Kbps) port for MEX I/O expansion modules. Local access port. *Third-Party integration drivers available through Ethernet and (1) EIA-232/485 configurable port. Expansion: Up to 192 points can be added using six MEx or MX expansion modules. MEx expansion modules can be mounted up to 100 feet away from the controller. Microprocessor: 32-bit Motorola Power PC microprocessor with cache memory, Fast Ethernet controller, high perfor- mance 32-bit communication co-processor, ARCNET communication co-processor and I/O expansion CAN co-processor. Memory: 16 MByte non-volatile battery-backed SDRAM (with 12 MBytes available for use), 8 MByte Flash memory, 32-bit memory bus. (Battery shelf life is 10 years with 720 hours of continuous operation.) Real-time Clock: Battery-backed real-time clock. Status Indicators: LED status indicators for EIA-232/485 communication, Ethernet port communication, and low battery status. Seven segment status display for running, error, and power status. Module Addressing: Rotary dip switches for intuitive network addressing of modules. Protection: Built-in surge and transient protection circuitry for power and communications. Listed by: UL916 (Canadian Std C22.2 No. 205-M1983), CE, FCC Part 15 - Subpart B - Class A. Environmental Operating Range: -20ºF to 140ºF (-29ºC to 60ºC); 10 to 90% relative humidity, non-condensing. NOTE: Control modules should be installed within the building. Power Requirements: 24 V-ac ± 10%, 50 to 60Hz, 24 VA, or 26 V-dc ± 10%, 10W. NOTE: Power consumption will increase when BACview or other accessories are attached. Physical: Rugged aluminum cover. Removable screw terminal blocks. Weight: 1.4 lb. (45.5 kg) Dimensions: Mounting Overall Width: 10-13/16”(275mm) Width: 11-5/16” (287mm) Height: 5” (127mm) Height: 7-1/2” (190mm) Depth: 2-3/4” (70mm) min. panel depth Automated Logic Corporation . 1150 Roberts Boulevard . Kennesaw, Georgia 30144 . 770/429-3000 . Fax 770/429-3001 . www.automatedlogic.com © 2008, Automated Logic Corporation. Automated Logic, the Automated Logic logo and WebCTRL are registered trademarks of Automated Logic Corporation. BACnet is a registered trademark of ASHRAE. All other trademarks are the property of their respective owners. Specifications are subject to change without prior notice. CSMELGRrev8