SIL06C Series 5 Vin and 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 1 NEW Product • 6 A current rating • Input voltage range: 4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc • Output voltage range: 0.9 Vdc to 5.0 Vdc • Industry leading value • Cost optimised design • Excellent transient response • Output Voltage adjustability • Pathway for future upgrades • Supports silicon voltage migration • Resulting in reduced design-in and qualification time • Designed in reliability: MTBF of >7 million hrs per Telcordia SR-332 • Available RoHS compliant The SIL06C series is a new high density open frame non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc) and offer a wide 0.9 Vdc to 5 Vdc output voltage range with a 6 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum. Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input version. The SIL06C series offers remote ON/OFF and overcurrent protection as standard. With full international safety approval including EN60950 and 2 YEAR WARRANTY UL/cUL60950, the SIL06C reduces compliance costs and time to market. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS (CONTD.) Voltage adjustability 5 V input models 0.9-3.3 Vdc Turn ON threshold 5 Vin 4.5 Vdc (See Note 7) 12 V input models 0.9-5.0 Vdc 12 Vin 9.0 Vdc Output setpoint accuracy With 1.0% trim resistors ±2.5% Turn OFF threshold 5 Vin 4.3 Vdc 12 Vin 7.5 Vdc Line regulation Low line to high line ±0.2% max. GENERAL SPECIFICATIONS Load regulation Full load to min. load ±0.5% max. Efficiency See Table Min./max. load 0 A/6 A Switching frequency Fixed 200 kHz Overshoot 5 V input models 3.0% max. (at turn on) 12 V input models 1.0% max. Approvals and (See Note 4) TÜV Product Services standards IEC60950, UL/cUL60950 Undershoot 100 mV max. Material flammability UL94V-0 Ripple and noise 5 Hz to 20 MHz (See Note 2) See table Weight 9.3 g (0.3 oz) Transient response Deviation 75 mV (See Note 1) 150 µs recovery to MTBF Telcordia SR-332 7,562,142 hours within regulation band ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Thermal performance Operating ambient, 0 ºC to +80 ºC Input voltage range 5 V input model 4.5-5.5 Vdc (See Note 8) temperature 12 V input model 10.2-13.8 Vdc Non-operating -40 ºC to +125 ºC Input current No load 50 mA Remote OFF 5 mA PROTECTION Input current (max.) 5 V input model 5.1 A @ Io max. Short-circuit protection Hiccup, non-latching (See Note 9) 12 V input model 1.6 A @ Io max. Input reflected ripple 5 V input model 52 mA (pk-pk) RECOMMENDED SYSTEM CAPACITANCE (See Note 2) 12 V input model 56 mA (pk-pk) Input capacitance (See Note 11) 270 µF/20 mΩ esr max. Remote ON/OFF Output capacitance (See Note 11) 680 µF/10 mΩ esr max. Logic compatibility Active high ON >2.4 Vdc International Safety Standard Approvals OFF <0.8 Vdc UL/cUL CAN/CSA 22.2 No. E139421 Start-up time Power up <20 ms UL60950 File No. E139421 (See Note 3) Remote ON/OFF <20 ms TÜV Product Service (EN60950) Certificate No. B 04 08 19870 228 CB report and certificate to IEC60950 File Name: sil06c.pdf Rev (02): 16 Dec 2005 SIL06C Series 5 Vin and 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER OVP CURRENT CURRENT (12) (5,13,14,15) VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 20 W 4.5-5.5 Vdc N/A 0.9-3.3 Vdc 0 A 6 A 89% ±0.2% ±0.5% SIL06C-05SADJ-VJ 30 W 10.2-13.8 Vdc N/A 0.9-5.0 Vdc 0 A 6 A 91% ±0.2% ±0.5% SIL06C-12SADJ-VJ Part Number System with Options SIL06C-12SADJ-VJ (14) Product Family Packaging Options SIL = Single in Line J = Pb-free (RoHS 6/6 compliant) Mounting Option Rated Output Current V = Vertical Mount 06 = 6 Amps H = Horizontal Mount Performance C = Cost Optimised Number of Outputs SADJ = Single Adjustable Output Input Voltage 05 = 4.5 Vdc to 5.5 Vdc 12 = 10.2 Vdc to 13.8 Vdc O Ou ut tp pu ut t V Vo ollt ta ag ge e A Ad djju us st tm me en nt t o of f t th he e S SI IL L0 06 6C C S Se er riie es s The ultra-wide output voltage trim range offers major advantages to users who select the SIL06C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL06C series converter leaves the factory the output has been adjusted to the default voltage of 0.9 V N No ot te es s N No ot te es s c co on nd dt t.. 1 di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max. to 8 Signal line assumed <3 m. 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 9 External input fusing recommended. 2 Measured with external filter. See Application Note 131 for details. 10 See Application Note 131 for operation above 50 ºC. 3 Power up is the time from application of dc input to Power Good 11 See Application Note 131 for more details. enabled. Remote ON/OFF is from ON/OFF asserted high to Power Good 12 These models have a wide trim output. 5 Vin has an output of 0.9 Vdc to enabled 3.3 Vdc and 12 Vin has an output of 0.9 Vdc to 5 Vdc. An external 4 This product is only for inclusion by professional installers within other resistor adjusts the output voltage. equipment and must not be operated as a stand alone product. 13 To order a unit with a pin length of 0.150”, please add suffix ‘P4’ to the 5 The standard unit with the suffix '-V' is for vertical mounting. To order a model number, e.g. SIL06C-05SADJ-HP4J. 14 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on unit with horizontal mounting, please add the suffix '-H' to the model special request, please contact your local sales representative for details. number, e.g. SIL06C-05SADJ-HJ. 15 NOTICE: Some models do not support all options. Please contact your 6 Measured as per recommended set-up. Cin = 270 µF (20 mΩ esr max.). local Artesyn representative or use the on-line model number search tool Cout = 680 µF (10 mΩ esr max.). at http://www.artesyn.com/powergroup/products.htm to find a suitable 7 Uses external resistor from trim to output ground. Minimum value 485 Ω alternative. for 5 V model, 280 Ω for 12 V model. See Applications Note 131 for details. R Riip pp plle e a an nd d N No oiis se e S Sp pe ec ciif fiic ca at tiio on n Output Model Pk - Pk RMS Voltage 5 V input models 0.9-2.5 Vdc 30 mV 15 mV 3.3 Vdc 40 mV 15 mV 12 V input models 0.9-2.5 Vdc 40 mV 20 mV 3.3-5 dcV 50 mV 20 mV File Name: sil06c.pdf Rev (02): 16 Dec 2005 SIL06C Series 5 Vin and 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product 1.200 (30.48) 0.050 (1.27) Pin 8 Pin 1 0.015 (0.38) 0.150 0.025 ±0.001 (3.80) (0.64) Typ. ±0.025 5X 0.100 (2.54) 0.950 PIN CONNECTIONS (24.13) Mechanical Support Pin 0.025 ±0.001 PIN NUMBER FUNCTION (0.64) Typ. ±0.025 All dimensions in INCHES (mm) 1 Vout General tolerance ±0.01in (±0.25mm) except where specified otherwise 2 Trim Figure 1: Mechanical Drawing - Horizontal Mount Version 3 Ground 4 Power Good 5 Remote ON/OFF 6Vin 7 Mechanical support 8 Mechanical support 9 Mechanical support on horizontal version only 1.200 0.062 (30.48) (1.57) Ref. Pin 1 Pin 8 0.050 (1.27) Typ. 0.025 ±0.001 0.050 (0.64) Typ. ±0.025 (1.27) 0.025 ±0.001 0.150 (0.64) Typ. ±0.025 (3.81) 0.100 5X (2.54) 0.950 (24.13) All dimensions in inches (mm) General tolerance ±0.01in (±0.25mm) except where specified otherwise Figure 2: Mechanical Drawing - Vertical Mount Version Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: � Application Note � Longform Data Sheet www.artesyn.com File Name: sil06c.pdf Rev (02): 16 Dec 2005 0.062 (1.57) PCB Ref 0.315 (8.00) max. 0.070 (1.78) 0.315 (8.00) max 0.610 0.150 (15.49) (3.81) Ref 0.120 (3.05) 9 Places 0.610 0.040 (15.49) (1.02) Ref. 0.150 (3.81) 8 Places 0.527 (13.38) 0.530 (15.01) 0.040 (1.02)