400-1200 Watts MP Series Special Features • Current share on all outputs with ratings of 10 A or greater • Remote sense on all outputs with ratings greater than 2 A • Overload protection on all outputs • Voltage adjustment on all outputs • Margining on all single output modules • Input OK signal and status indicator LED MP4 • Global DC OK signal and status indicator LED • Global and individual module inhibits/enable • 2 year warranty • Forced air cooling, field replaceable fan • Isolated 5 V bias voltage • Power factor correction • EN61000-3-2 harmonic distortion compliance • CISPR 22, EN55022 Curve B conducted / radiated EMI • European CE Mark requirements • Optional VME timing and system DC OK module • Customer-provided air option • Additional 200 W output @ high line (180-264 VAC) • Low leakage option for medical applications MP6 • EN61000 immunity standards • Standard modification flexibility (consult factory) Low noise fan Fan fail signal Module enable Outputs down to 0.5V Environmental Operating temperature: -20°C to 50°C (start @ 0°C) (derate each output linearly to 50% at 70°C) (-20°C to 40°C max. with rear air option) Shock/Vibration: Mil-Hdbk 810E MP8 Humidity: 95% non-condensing Storage temperature: -40°C to +85°C Temperature coefficient: 0.02% per °C Cooling: Internal DC fan or customer provided air (option) Safety UL UL1950 CSA CSA22.2 No. 234 Level 5 IEC IEC950, Class 1 MP1 VDE EN60950, BABT Compliance to EN 60950, BS 7002 CB Certificate and report CE Mark Technical Support: (888) 41ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 136 Rev 2.17.06 MP Series ASIA EUROPE AMERICAS Units 2111-2116, Level 21 Astec House, Waterfront Business Park 5810 Van Allen Way Tower1, Metroplaza Merry Hill, Dudley Carlsbad, CA 92008 West Midlands, DY5 1LX, UK 223, Hing Fong Road Telephone: 760-930-4600 Kwai Fong, New Territories Telephone: 44 (1384) 842-211 Facsimile: 760-930-0698 Facsimile: 44 (1384) 843-355 Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Electrical Specs Input Output Input voltage 85-264 VAC Adjustment range ±10% min. all outputs 1 120-350 VDC Margining ±4-6% nom. Frequency 47-440 Hz Overall reg 0.4% or 20 mV max. Inrush current 40 A peak max. (soft start) (36 W modules 4% max.) Efficiency 70-80% typ. @ full case load Ripple RMS: 0.1% or 10 mV, whichever is greater Power factor 0.99 typ. meets EN61000-3-2 Pk-Pk: 1.0% or 50 mV, whichever is greater Bandwidth limited to 20 MHz Turn-on time AC on 1.5 sec typ., Inhibit / Enable 150 ms typ. Dynamic response <2% or 100 mV, with 25% load step. EMI filter standard CISPR 22 Recovery time To within 1% in <300 μsec. EN55022 Level “B” Overcurrent protection Single, main of dual output module EMI filter 105-120% of rated output current. (low leakage option) CISPR 22 Aux output of dual output module 105-140% EN55022 Level “A” of rated output current. Leakage current standard 2.0 mA max. @ 240 VAC Triple output module internally protected Leakage current Short circuit protection Protected for continuous short circuit (low leakage option). 300 μA max. @ 240 VAC Recovery is automatic upon removal of short. Radiated EMI CISPR 22 Overvoltage protection EN55022 Level “B” (measured at sense Holdover storage 20 ms minimum connection) Single output modules (independent of input VAC) 2-5.5 V 122-134% 6-60 V 110-120% AC OK >5 ms early warning min. Dual output module before outputs loose regulation 2-6 V 122-134% Full cycle ride thru (50 Hz) 8-28 V 110-120% Harmonic distortion Meets EN61000-3-2 Triple output module. Isolation Meets EN60950 No overvoltage protection provided. Recycle Global Inhibit/Enable TTL, Logic “1” and Logic “0” the AC input voltage to reset OVP circuit Input fuse (internal) MP4: 10 A Reverse voltage protection 100% of rated output current MP6: 15 A Thermal protection All outputs disabled when internal temp MP8: 20 A exceeds safe operating range. >5 ms warning MP1: 20 A (AC OK signal) before shutdown Warranty 2 years Remote sense Up to 0.5 V total drop (not available on triple output module) 2 Power Derating Curve Single wire parallel Current share to within 2% of total rated current 2 50 DC OK -2% to -8% of nominal for any monitored output 100 Minimum load Not required on single or triple output modules. 3 10% required on main of dual output modules 80 Normal Housekeeping bias voltage 5 VDC @1.0A mA max. present whenever AC Air Flow input is applied % 60 Module inhibit TTL, isolated, singles and dual Rated 50 Total (both outputs) only Case Switching frequency 250 kHz 40 Load Output/Output isolation >1 Megohm VME signal option board POR signal & quad external DC OK 20 Hold-up module (HUP) 1-slot module providing an additional 34mSec (60mSec total) hold-up @ 600W loading. 40 45 55 60 65 70 30 35 50 TA – Ambient Temperature – °C Notes: 1. Single output modules only. 2. Single and main of dual output modules only. 3. Contact factory for optional preload if required. www.astecpower.com 137 Common Examples and Specifications Modules S Si in ng gl le e T Tr ri ip pl le e D Du ua al l Outputs 11 2 3 Max output power 210 W 360 W 600 W 144 W 36 W Max output current 35 A 60 A 120 A 10 A 2 A Volts 2-60 V 2-60 V 2-60 V 2-28 V 2-28 V Standard voltage increments 25 25 25 19 18 Remote sense on outputs Yes Yes Yes Yes, both No Remote margin/V-Program Yes Yes Yes No No Module inhibit (isolated) Yes Yes Yes --- --- Single wire active current share Yes Yes Yes Yes, main only --- Over voltage / Over current protection Yes Yes Yes Yes Over current Minimum load required No No No Yes (10%), main only No Slots occupied in any MP case 12 3 1 1 Modules Voltage Voltage Single Output Dual Triple 1 1 Code Module Code Output Output 1 2 3 1 2 3 V1 V2 V1 V2 V3 Single Output Example 2 V A 35A 60 A 120 A — 10 A — — 2 A 2.2 V B 35 A 60 A 120 A — 10 A — — 2 A 5 V @ 60A 3 V C 35A 60 A 120 A — 10 A — — 2 A 3.3 V D 35 A 60 A 120 A — 10 A — — 2 A Module Code Voltage Code 5 V E 35A 60 A 120 A 10 A 10 A — — 2 A 5.2 V F 35 A 60 A 115 A — 10 A — — 2 A 5.5 V G 34 A 58 A 109 A — 10 A — — 2 A 2 E 6.0 V H 23 A 42 A 78 A — 10 A — — 2 A 8.0 V I 20 A 36 A 68 A — — 1 A 1 A 1 A 10 V J 18 A 32 A 60 A — — 1 A 1 A 1 A 11 V K 17 A 31 A 54.5 A — — 1 A 1 A 1 A 1 12V L 17A 30 A 50 A 10 A 4 A 1 A 1 A 1 A Dual Output Example 14 V M 14 A 21 A 40.5 A 9 A 4 A 1 A 1 A 1 A 12 V @ 10 A 15 V N 14 A 20 A 39 A 8 A 4 A 1 A 1 A 1 A 5 V @ 10 A 18 V O 11 A 19 A 33.3 A — — — 0.5 A 0.5 A 20 V P 10.5 A 18 A 30 A — — — 0.5 A 0.5 A Module Code 24 V Q 8.5 A 15 A 23.5 A 4 A 2 A — 0.5 A 0.5 A Voltage Code always 4 28 V R 6.7 A 12.8 A 21.4 A 3 A 2 A — 0.5 A 0.5 A 30 V S 6.5 A 12 A 20 A — — — — — 33 V T 6.2 A 10.9 A 18.2 A — — — — — 4 L E 36 V U 5.8 A 10 A 16.6 A — — — — — 42 V V 4.2 A 7.5 A 12.5 A — — — — — 48 V W 4.0 A 7.5 A 12.5 A — — — — — 54 V X 3.7 A 6.0 A 11 A — — — — — 3 60 V Y 3.5 A 6.0 A 10 A — — — — — Triple Output Example 12 V @ 1 A Non-std Z 20 V @ 0.5 A 2.4V-2.7V 35 60 120 — 10 — — 2 5 V @ 2 A 3.6V-4.5V 35 60 120 — 10 — — 2 6.6V-9.2V 20 36 68 10 4 — — 1 2 8.8V-9.0V 18 32 60 10 4 — — 1 Voltage Code Notes: L P E 1 Takes up one slot. Notes: 2 Takes up two slots. 1. Total load not to exceed 144 W. 3 Takes up three slots. 2. No module code required. 3. Total load not to exceed 36 W. Technical Support: (888) 41-ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 138 Rev 6.28.05 MP Series ASIA EUROPE AMERICAS Units 2111-2116, Level 21 Astec House, Waterfront Business Park 5810 Van Allen Way Tower1, Metroplaza Merry Hill, Dudley Carlsbad, CA 92008 West Midlands, DY5 1LX, UK 223, Hing Fong Road Telephone: 760-930-4600 Kwai Fong, New Territories Telephone: 44 (1384) 842-211 Facsimile: 760-930-0698 Facsimile: 44 (1384) 843-355 Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Option Code: 0 = no options Ordering Information 1 = rear air exhaust 3 = global enable 5 = option package (options 1 & 3) I IN N P PU UT T M =low leakage C Ca as se e S Si iz ze e ( (i in nc ch he es s) ) S Sl lo ot ts s 8 85 5- -2 26 64 4 V VA AC C 1 18 80 0- -2 26 64 4 V VA AC C N = low leakage plus option 1 4 4 = 2.5 x 5 x 10 5 available slots 400 W max. 600 W max. P = low leakage plus option 3 6 6 = 2.5 x 5 x 11 5 available slots 600 W max. 800 W max. R = low leakage plus option 5 8 8 = 2.5 x 7 x 10 6 available slots 800 W max. 1000 W max. 1 1 = 2.5 x 8 x 11 7 available slots 1000 W max.* 1200 W max. * *1 12 20 00 0 W W m mo od di if fi ic ca at ti io on n a av va ai il la ab bl le e a at t h hi ig gh h l li in ne e o op pe er ra at ti io on n (MP1 Only) (MP8 & MP1 Only) Slot #1 Slot #2 Slot #3 Slot #4 Slot #5 Slot #7 Slot #6 MP - - ---- - -XXX Use Only for 2 or 3 digit code Modified Standard Use “ — ” for Standard Remote Sense See previous page. Use“/” After any module using Remote Sense with or-ing diode (redundancy) Notes: Parallel Code: 1. Omit digits that do not apply. 2. Specify modules from lowest number of outputs to highest. (Single/Dual/Triple) MP4 & MP6 3. If number of outputs are equal, specify modules from highest to lowest power increments. If available slots power increments are equal, specify in descending alphabetical order (1A, B, C . . .). 4. Always start with Slot 1. MP8 5. All MP model configurations created using this selection guide are standard MP products with available slots standard availability and lead times. 6. Optional VME/DCOK module must always be located in the last slot. Module designator is “VME”. MP1 available slots Standard EXAMPLE Parallel Codes* 7 6 5 4 3 2 1 Factory assisted code Slot 5 0 = no parallel for modifications Output 5: 12 V @ 1 A 1 = 1 & 2 2.5” x 7” x 10” Slot 3 Output 6: 12 V @ 1 A VME Card 2 = 2 & 3 Output 2: 12 V @ 17 A (6 slots available) Output 7: 5 V @ 2 A 3 = 3 & 4 4 = 4 & 5 MP8- 2 F / 1 L - 4 L E - L L E -V ME -0M -XXX 5 = 3 & 4 & 5 -HUP Low Leakage 6 = 5 & 6 Slots 1 & 2 Slot 4 7 = 4, 5 & 6 No Paralleling Output 1: 5.2 V @ 60 A Output 3: 12 V @ 10 8 = 6 & 7 Output 4: 5 V @ 10 A Hold-up Module 9 = 3 & 4, 6 & 7 SINGLE OUTPUTS *For custom parallel configurations contact Total Output Size Model Number Astec Power Technical Support. Power (Volts/Amps) (inches) 360 W 2 / 180 2.5 x 5 x 10 MP4-3A-2A-30 400 W 5 / 80 2.5 x 5 x 10 MP4-3E-00 - 429 600 W 2 / 275 2.5 x 8 x 11 MP6-3A-3A-1A-90 600 W 5 / 120 2.5 x 5 x 11 MP6-3E-00 600 W 48 / 12.5 2.5 x 5 x 11 MP6-3W-00 800 W 5 / 160 2.5 x 7 x 10 MP8-3E-2E-30 - 415 800 W 48 / 16.6 2.5 x 7 x 10 MP8-3W-1W-30 1000 W 5 / 200 2.5 x 8 x 11 MP1-3E-3E-30 - 404 MULTIPLE OUTPUTS Total Output 1 Output 2 Output 3 Output 4 Output 5 Output 6 Size Model Number Power (Volts/Amps) (inches) 400 W 5 / 60 3.3 / 35 12 / 1 12 / 1 12 / 1 — 2.5 x 5 x 10 MP4-2E-1D-LLL-00 400 W 24 / 15 12 / 17 5 / 35 — — — 2.5 x 5 x 10 MP4-2Q-1L-1E-00 400 W 5 / 60 12 / 17 12 / 10 5 / 10 — — 2.5 x 5 x 10 MP4-2E-1L-4LE-00 400 W 5 / 35 12 / 10 3.3 / 10 12 / 1 12 / 1 5 / 2 2.5 x 5 x 10 MP4-1E-4LD-LLE-00 600 W 3 / 60 5 / 60 12 / 10 12 / 4 — — 2.5 x 5 x 11 MP6-2C-2E-4LL-00 600 W 5 / 120 12 / 17 12 / 10 5 / 10 — — 2.5 x 5 x 11 MP6-3E-1L-4LE-00 600 W 12 / 30 5 / 35 — — — — 2.5 x 5 x 11 MP6-2L-1E-00 800 W 36 / 16.6 24 / 4 5 / 10 12 / 10 12 / 4 — 2.5 x 7 x 10 MP8-3U-4QE-4LL-00 800 W 5 / 120 3.3 / 35 12 / 17 12 / 10 12 / 4 — 2.5 x 7 x 10 MP8-3E-1D-1L-4LL-00 800 W 15 / 20 5 / 35 15 / 14 24 / 8.5 15 / 8 5 / 10 2.5 x 7 x 10 MP8-2N-1E-1N-1Q-4NE-00 800 W 2 / 180 5 / 60 — — — — 2.5 x 7 x 10 MP8-3A-2A-2E-30 1000 W 3.3 / 120 5 / 120 — — — — 2.5 x 8 x 11 MP1-3D-3E-00 www.astecpower.com 139 Slot 7 Slot 6 Slot 6 Slot 5 Slot 5 Slot 5 Slot 4 Slot 4 Slot 4 Slot 3 Slot 3 Slot 3 Slot 2 Slot 2 Slot 2 Slot 1 Slot 1 Slot 1 Drawings MP MODULES Single 210 Watt .44 (11.2 ) V+ (2X) DC-DC Converter Output Modules M4X8 SCREWS (2X) Control Signal Information, J1 Control Connector .48 (12.1) Pin No. Function V- 1 + Remote Sense single or dual o/p main 2 Remote Margin / V. Program single o/p 3 Margin High single o/p 1.38 � V ADJ 4 - Remote Sense / Margin Low single or dual o/p main (35.1) 5 Spare 6 Module, Isolated Inhibit single or dual o/p 7 Module Inhibit return single or dual o/p .44 (11.3) PIN 1 8 Current Share (SWP) single or dual o/p main 9 + Remote Sense V2 dual o/p, single is spare 10 - Remote Sense V2 dual o/p, single is spare .32 � (8.1) Single 600 Watt Single 360 Watt .63 (16.0) V+ .33 (8.5) .63 � V+ (16.0) .59 � M4X8 SCREWS (4X) (15.0) M4X8 SCREWS (4X) V- V- PIN 1 V ADJ V ADJ .32 (8.1) .32 � PIN 1 (8.1) Triple 36 Watt Dual 144 Watt V1 ADJ .46 (11.7) V1 + (4X) V1 - V1+ V2 + V1- V2 ADJ V2+ V2 - V2- (3X) .30 (7.5) PIN 1 V3+ M3X8 SCREWS (4X) V3- DC OUTPUT CONNECTION 1.17 (29.7) V2 ADJ .42 (10.7) V3 ADJ .48 V1 ADJ .32 (12.1) (8.1) PIN 1 Technical Support: (888) 41-ASTEC or (407) 241-2752 140 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 .48 (12.1) 1.38 (35.1) (2X) (2X) .44 (11.3) .61 (15.6) (2X) .84 1.24 (31.6) (2X) (21.3) .44� (11.3) MP Series ASIA EUROPE AMERICAS Units 2111-2116, Level 21 Astec House, Waterfront Business Park 5810 Van Allen Way Tower1, Metroplaza Merry Hill, Dudley Carlsbad, CA 92008 West Midlands, DY5 1LX, UK 223, Hing Fong Road Telephone: 760-930-4600 Kwai Fong, New Territories Telephone: 44 (1384) 842-211 Facsimile: 760-930-0698 Facsimile: 44 (1384) 843-355 Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 5 5- -I In nc ch h C Ca as se e S Si iz ze e: : MP4: 2.5” x 5” x 10” (63.5mm x 127mm x 254mm) MP Series 5 5- -I In nc ch h C Ca as se e S Si iz ze e: : MP6: 2.5” x 5” x 11” (63.5mm x 127mm x 279.4mm) W We ei ig gh ht t: : MP4 Case: 2.6 lbs. • MP6 Case: 3.2 lbs. • 36 W Triple: 0.5 lb. MP4 (400/600 Watts Max) 210 W Single: 0.6 lb. • 360 W Single 1.0 lb. • 600 W Single: 2.0 lbs. MP6 (600/800 Watts Max) 144 W Dual: 0.6 lb. #8-32 MTG HOLES 4 PL 171.45 19.05 MARKED "A" 6.750 .750 PFC Input Information M4 MTG HOLES 4 PL MARKED "B" B B A J1 Control Connector Standard for all cases Pin No. Function J1-1 Input AC OK - “Emitter” 101.60 Standard Airflow J1-2 Input AC OK - “Collector” 4.000 J1-3 Global DC OK - “Emitter” J1-4 Global DC OK - “Collector” J1-5 Spare J1-6 Global Inhibit/Optional Enable Logic “0” J1-7 Global Inhibit/Optional Enable Logic “1” B B A A J1-8 Global Inhibit/Optional Enable Return J1-9 SELV 5V Housekeeping J1-10 SELV 5V Housekeeping Return 171.45 29.05 12.70 6.750 1.144 .500 3.5 (TYP) .14 M4 MTG HOLES 4 PL +.0 38.10 63.5 -.5 1.500 +.00 2.50 -.02 12.70 171.45 19.05 6.750 .750 .500 MP4 MP6 + 17.3 1.0 +.0 - +.0 254.0 279.4 + -.5 -.5 .68 .04 - +.00 +.00 11.00 10.00 3.7 -.02 -.02 TYP .15 MOUNTING HOLES DIMENSIONS IDENTICAL ON BOTH SIDES +.0 127.0 -.5 +.00 19.0 5.00 -.02 .75 S� S� S� S� S� 1 L� L� L� L� L� O� O� O� O� O� T T T T T 5 32 1 4 49.2 1.94 4.3 .8 + + -A- 23.9 .5 - (4 PL) + .17 .03 + - .94 .02 - NON-CUMULATIVE 2 Notes 1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs. (0.67 N-m). 2. Control connectors: (J1 and J2) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts (Molex C - Grid III Series) or AMP Model number 87977-3 with 87309-8 pins. Connector kit includes mating connector and 10 pins, Astec part #70-841-004. 3. Chassis material: aluminum with chemical film coating (conductive). 4. All dimensions are in millimeters and inches, and are typical. 5. Customer mounting -3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.150” (3.8mm). Max. torque: 5in-lbs. 6. Output module connections: All single O/P modules are M4 x 8mm screws. Max. torque: 10in-lbs. Dual O/P module is M3 x 8mm screws. Max. torque: 5 in-lbs. Triple O/P module is .045” square pins on .156” centers. Mates with Molex 09-50-8063 or equivalent. www.astecpower.com 141 M4 MOUNTING HOLES (4X) Drawings 7 7- -I In nc ch h C Ca as se e S Si iz ze e: : MP8: 2.5” x 7” x 10” (63.5mm x 177.8mm x 254mm) MP Series W We ei ig gh ht t: : MP8 Case: 4.1 lbs. • 36 W Triple: 0.5 lb. • 210 W Single: 0.6 lb. • 360 MP8 (800/1000 Watts Max) W Single: 1.0 lb. • 600 W Single: 2.0 lbs. 144 W Dual: 0.6 lb. 12.70 254 0.5 10.0 171.45 19.05 6.75 0.75 152.40 6.0 Standard Airflow 171.45 29.05 6.75 1.1 171.45 19.05 6.75 0.7 D 38.10 63.5 1.5 2.5 35.0 1.38 12.70 254 0.5 10.0 60.5 59.5 177.8 2.34 2.38 7.0 S S S S S S AC INPUT L L L L L L 14.7 1 63.5 O O O O O O 0.58 T T T T T T 2.5 31.8 1.25 6 5 4 3 2 1 14.0 0.55 177.8 2 OUTPUT MODULE AREA 7.0 Notes 1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs. (0.67 N-m). 2. Control connectors: (J1 and J2) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts (Molex C - Grid III Series) or AMP Model number 87977-3 with 87309-8 pins. Connector kit includes mating connector and 10 pins, Astec part #70-841-004. 3. Chassis material: aluminum with chemical film coating (conductive). 4. All dimensions are in millimeters and inches, and are typical. 5. Customer mounting -3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.150” (3.8mm). Max. torque: 5in-lbs. 6. Output module connections: All single O/P modules are M4 x 8mm screws. Max. torque: 10in-lbs. Dual O/P module is M3 x 8mm screws. Max. torque: 5 in-lbs. Triple O/P module is .045” square pins on .156 centers. Mates with Molex 09-50-8063 or equivalent. Technical Support: (888) 41-ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 142 M4 MOUNTING HOLES MARKED "B" (4X) "B" "A" "B" "A" "A" "B" "A" "B" #8-32 MOUNTING HOLES MARKED "A" (4X) MP Series ASIA EUROPE AMERICAS Units 2111-2116, Level 21 Astec House, Waterfront Business Park 5810 Van Allen Way Tower1, Metroplaza Merry Hill, Dudley Carlsbad, CA 92008 West Midlands, DY5 1LX, UK 223, Hing Fong Road Telephone: 760-930-4600 Kwai Fong, New Territories Telephone: 44 (1384) 842-211 Facsimile: 760-930-0698 Facsimile: 44 (1384) 843-355 Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 8 8- -I In nc ch h C Ca as se e S Si iz ze e: : MP1: 2.5” x 8” x 11” (63.5mm x 203.2mm x 279.4mm) MP Series W We ei ig gh ht t: : MP1 Case: 5.0 lbs. • 36 W Triple: 0.5 lbs. • 210 W Single: 0.6 lbs. • 360 MP1 (1000/1200 Watts Max) W Single: 1.0 lb. • 600 W Single: 2.0 lbs. 144 W Dual: 0.6 lb. 1 2 Notes 1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs (0.67 N-m). 2. Control connectors: (J1 and J2) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts (Molex C - Grid III Series) or AMP Model number 87977-3 with 87309-8 pins. Connector kit includes mating connector and 10 pins, Astec part #70-841-004. 3. Chassis material: aluminum with chemical film coating (conductive. 4. All dimensions are in millimeters and inches, and are typical. 5. Customer mounting -3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.150” (3.8mm). Max. torque: 5in-lbs. 6. Output module connections: All single O/P modules are M4 x 8mm screws. Max. torque: 10in-lbs. Dual O/P module is M3 x 8mm screws. Max. torque: 5 in-lbs. Triple O/P module is .045” square pins on .156 centers. Mates with Molex 09-50-8063 or equivalent. www.astecpower.com 143