Embedded Power for Business-Critical Continuity Rev. 05.27.08 LPS60 Series 1 of 3 LPS60 Series 60 Watts Total Power: 60 - 80 Watts Input Voltage: 85 - 264 Vac 120 - 300Vdc # of Outputs: Single Electrical Specifications Input Special Features Input ra nge: 85 - 264 Vac (wide range) • Universal input 120 - 300 Vdc • 3" x 5" footprint Frequency: 47-440 Hz •Remote sense Inrush current: <18A peak @ 115 Vac, <36 A peak @230 Vac, • Built in EMI filter cold start @ 25 °C • Low output ripple Input current: 1.5 A max. (RMS) @ 115 Vac • Adjustable output voltage • Overload protection Efficiency: 70% typical at full load • 110 KHz switching frequency EMI filter: FCC Class B conducted; CISPR22 Class B conducted; EN55022 • LPX60 enclosure kit available Class B conducted; VDE0878PT3 Class B conducted Safety ground leakage <0.5 mA @ 50/60 Hz; 264 Vac input current: Output Maximum power: 60 W for convection; 80 W with 30 CFM forced air Adjustment range -5, +10% minimum Hold-up time 20 ms @ 60 W load, 115 Vac nominal line Overload protection Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating Overvoltage protection 5 V output; 5.7 - 6.7 Vdc. Other outputs 10% to 25% Safety above nominal output VDE 0805/EN60950 (IEC950) Remote sense Compensates for 0.5 V lead drop min. Will operate without 11774-3336-1255 remote sense connected. Reverse connection protected. (LC #86665) UL UL1950 E132002 CSA CSA 22.2-234 Level 3 LR53982C NEMKO EN 60950/EMKO-TUE P95100123 (74-sec) 203 CB Certificate and report 1521, 1522, 1523, 1524 CE Mark (LVD) Rev. 05.27.08 LPS60 Series 2 of 3 Environmental Specifications Operating temperature: Power Derating Curve 0° to 50 °C ambient derate each output as 2.5% per degree from 50° to 70 °C, -20 °C startup 80W Storage temperature: -40°C to +85 °C 30 CFM Forced Air Cooling Electromagnetic designed to meet IEC801, -2, -3, -4, -5, -6, Level 3 60W Output susceptibility: Power (Watts) Humidity: Operating; non-condensing 5% to 95% RH 40W 40W Natural Three orthogonal axes, sweep at 1 cot/min, Convection 30W Vibration: 5 min. dwell at four major resonances 0.75 G peak Cooling 20W 5 Hz to 500 Hz, operational Temperature coefficient ±0.04% per °C 0W 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C >550,000 hours at full load and 25 °C ambient MTBF demonstrated conditions TA – Ambient Temperature – °C Mechanical Drawing 0.22" M2 (5.6) Remote Sense GND + _ SK201 Connector M1 Voltage Adj. Pot 3.00" (76.2) SK 2 1 2 2.55" 3 (64.8) 4 SK 1 5 1 N 6 3 L 0.15" (4) 4.56" 0.22" DIA (4 places) (115.8) (5.6) 5.00" (127) 1.69" (42.9) 0.12" (3) Embedded Power for Business-Critical Continuity Rev. 05.27.08 LPS60 Series Americas Ordering Information 3 of 3 5810 Van Allen Way Maximum Load Maximum Load Model Output Minimum Peak Ripple Carlsbad, CA 92008 2 with Convection with 30CFM Regulation 1 3 Number Voltage Load Load P/P (PARD) USA Cooling forced Air Telephone: +1 (760) 930 4600 LPS61 3.3 V 2 A 12 A 16 A 18 A ±2% 33 mV Facsimile: +1 (760) 930 0698 LPS62 5 V 0 A 12 A 16 A 18 A ±2% 50 mV Europe (UK) LPS63 12 V 0 A 5 A 6.7 A 7.5 A ±2% 120 mV Waterfront Business Park LPS64 15 V 0 A 4 A 5.3 A 6 A ±2% 150 mV Merry Hill, Dudley West Midlands, DY5 1LX LPS65 24 V 0 A 2.5 A 3.3 A 3.8 A ±2% 240 mV United Kingdom LPS68 48 V 0 A 1.3 A 1.7 A 1.9 A ±2% 480 mV Telephone: +44 (0) 1384 842 211 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. Facsimile: +44 (0) 1384 843 355 2 . At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Asia (HK) 3 . Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated 14/F, Lu Plaza line voltage and load ranges. 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Pin Assignments Telephone: +852 2176 3333 Connector LPS61 LPS62 LPS63 LPS64 LPS65 LPS68 Facsimile: +852 2176 3888 SK1-1 Neutral Neutral Neutral Neutral Neutral Neutral SK1-3 Line Line Line Line Line Line For global contact, visit: SK2-1 3.3 V 5 V +12 V +15 V +24 V 48 V www.powerconversion.com SK2- 2 3.3 V 5 V +12 V +15 V +24 V 48 V SK2- 3 3.3 V 5 V +12 V +15 V +24 V 48 V techsupport.embeddedpower SK2-4 Common Common Common Common Common Common @emerson.com SK2-5 Common Common Common Common Common Common SK2-6 Common Common Common Common Common Common While every precaution has been taken to ensure SK201-1 +Sense +Sense +Sense +Sense +Sense +Sense accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims SK201-2 -Sense -Sense -Sense -Sense -Sense -Sense all liability for damages resulting from use of this information or for any errors or omissions. Mating Connectors AC Input: Molex 09-50-8031 (USA) Not required for (-T) option 09-91-0300 (UK) Emerson Network Power. PINS: 08-58-0111 The global leader in enabling DC Outputs: Molex 09-50-8061 (USA) Not required for (-T) option business-critical continuity. 09-91-0600 (UK) PINS: 08-58-0113 Remote Sense: Molex 22-01-2025 AC Power PINS: 08-52-0113 Astec Connector Kit #70-841-006, includes all of the above Connectivity 1. Specifications subject to change without notice. DC Power 2. All dimensions in inches (mm), tolerance is ±0.02" (±0.5mm) 3. Mounting holes M1 and M2 should be grounded for EMI purposes. Embedded Computing 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 Vac input, 25°C Embedded Power unless otherwise stated. Monitoring 6. Warranty: 2 year 7. Weight: 0.75lbs/0.34kg Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co.